SAPCCMSR agent gets status SHUTDOWN

All,
I have installed the monitoring package for SAP Business Connector (on AIX) to facilitate monitoring of the SAP BC. This uses a SAPCCMSR agent which runs on the SAP BC machine, collects data, and sends this to the SAP Monitoring system CCMS. This works fine. However, when our SAP Monitoring system is stopped & started, the monitoring agent gets the status SHUTDOWN and no more data is recieved in SAP (altough the agent remains active on the SAP BC server). In order to get the monitoring working again I have to perform a manual connection test of the agent in RZ21.
Does anyone know if there is any way of keeping the connection alive when the monitoring SAP system is stopped, or if the checking of the connection in RZ21 can be automated?
Thanks.

Hi Amrendra,
Thanks for your response. The step 2 is what I am referring to as the action I would like to have automated. The agent has the status SHUTDOWN after stopping & starting the SAP system. Performing the connection test manually sets the status to ONLINE again and activates the monitoring again in CCMS. This I would like to know if it can be automated.
Regards,
Bart

Similar Messages

TREX sapccmsr agent not working

HI.
We have TREX7.0 system. In trex mmc sapccsr agent is not running. As per some guides we registered sapccmsr agent using sapccmsr pf=<instprofile> -j2ee -r to central solution manager system
in services sapccmsr agent is registerd and started but it is immediatly stopping. as per note 883361 i have executed Agent for J2EE and TREX instances:
sapccmsr pf=<instance profile> -j2ee -initshm but still we have same problem.
And how services sapccmsr and sapmmc(automatically available in trex mmc)ccmsr is mapped.

can you please check RFC status and also concern SM21 logentries.
regards
nag

How can a Workflow get status CANCELLED

Hello,
We have the following situation.
A workflow shows status CANCELLED in the BBP_PD. All other information of the Workflow is gone in this trx!
Via the trx. SCOT we can see the workitem mail were send to the approval agents.
The question we have is:
1. Under what circumstances a Workflow can get status CANCELLED?2.
2. How can we analize, using the Workflow tools, what happened in the Workflow BEFORE it got cancelled? Did it reach the for instance the agents to get approved?
Thanks for any clue.
Aart

Hi,
Please go to transaction BBP_PD, open the document and find the workitem ID.
Display the workitem in SWI1 transaction. You see the worklfow log.
Regards,
Masa

Error when starting SAPCCMSR agent

Helo Guru's,
When I try to start/initialize shared memory for SAPCCMSR agent on satellite system I'm getting the following error, could any one please help me to resolve this issue. Please find the details for your reference.
INFO: CCMS agent sapccmsr working directory is /usr/sap/tmp/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/tmp/sapccmsr/csmconf
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
      compiled at   Feb 4 2008
      systemid      390 (AMD/Intel x86_64 with Linux)
      relno         6400
      patch text    patch collection 2008/1, OSS note 1129577
      patchno       219
INFO Runtime:
      running on    ashb01wa10qa Linux 2.6.9-78.0.5.ELsmp #1 SMP Wed Sep 24 05:40:24 EDT 2008 x86_64
      running with profile   /usr/sap/RQ1/SYS/profile/RQ1_D01_ashb01wa10qa
INFO profile parameters:
      alert/MONI_SEGM_SIZE = 40000000
      alert/TRACE          = 1
      SAPSYSTEM            = 01
      SAPSYSTEMNAME        = RQ1
      SAPLOCALHOST         = ashb01wa10qa
      DIR_CCMS             = /usr/sap/ccms
      DIR_LOGGING          = /usr/sap/RQ1/D01/log
      DIR_PERF             = /usr/sap/tmp
INFO:
      pid           29369
ERROR: Cannot open Monitoring Segment 99 rtc = 249
Last reported error: [249] Could not Create/Attach Shared Memory. Permission Denied. Wrong User ID ?
Note:The owner of sapccmsr directory on /usr/sap/tmp is rq1adm only.
Thanks in advamce,
S.Viswanathan

I am on a different release, and you might have checked this already, but anyhow, you might want to check filesystem permissions again:
drwxrwxr-x root                  sapsys /usr/sap/tmp
-rwxr-xr-x   <SAPSID>adm sapsys sapccm4x
and you should start agent as <SAPSID> user.
You can check permissions of your shared memory segments with:
ipcs -m
command. Just run it as root from shell.
If you want you might consider removing and reinitiating memory segment (but do this only after you are sure that that memory segment is not used any more!) or - just reboot.
Edited by: Dragoljub Ljubicic on Jun 22, 2009 1:55 PM

Sapccmsr agent registeration failed

hi,
i am trying to register sapccmsr agent though visual administrator and i am getting this error message " ld.so.1:sapccmsr:fatal:libsapu16_mt.so :open failed. No such file or directory "
Thanks
Venkat

Hi Venkat,
Check whether libsapu16_mt.so is in exe directory and have the right permissions(744)
Thanks
Prince Jose

How can I get Status of the report using after report trigger

I want to get Status of my report on GUI . I am aware that we can look into XMLP_SCHED_OUTPUT table to get all the required details but I am not aware as how I can pull data from this table and make it available on GUI screen. Or is there any way to use jobid of the report and use in Data template of the same report?
Any help on this will be greatly appreciated.

What/which GUI? One of your own making? Design it and query from the table(s) of interest, and populate fields based on the results. Which job ID? The latest or one of your choosing? Add a drop down list or menu and let the user select which job. Fairly vague requirements you've listed.

Business Process Monitoring with SAPCCMSR Agents

Hi
I have installed a SAPCCMSR Agent in a non-sap system to monitor log files.
This is the configuration about a particularly log file:
LOGFILE_TEMPLATE
DIRECTORY="E:\LOG"
FILENAME="senddata*.txt"
PATTERN_0="error"
VALUE_0=RED
MONITOR_NEWEST_FILES=1
In this folder every day, log are created (with name senddata-DD-MM-YYYY) and I would like to monitor only the last log produced to search for error.
When the agent run, it creates a monitor in rz20 with the name of the current log(for example senddata-08-09-2014).
Tomorrow when a new log will created, the monitor will change its name (for example in senddata-09-09-2014).
I also want use business process monitoring to create a monitor and assign the mte in rz20.
When I choose from a list which monitor assign, it give me the name of the ccms monitor that have the name valid for today(senddata-08-09-2014).
The problem is that tomorrow this MTE will change its name and will invalidate my monitor in bpm.
I tried to insert manually the value in bpm monitor like ...../senddata*/.... to see if dinamically, it will acquire the monitor with the name in rz20.
But this doesn't work.
Anyone have an idea on how monitor this?
Thanks very much & Best regards
Marco

Hi Mark,
When the agent run, it creates a monitor in rz20 with the name of the current log(for example senddata-08-09-2014).
"senddata-08-09-2014 " - Is this the name of your log file created on OS level everyday ?
If yes, then why not after every log switch after end of day, a file with name sendata replaces its old content with the contents of current logs ?
This "replacing" is scheduled to run every 5 mins from OS level(cron script) and it picks the name of the file using current date method ?
In this was you will have your monitor with same name.
Regards,
Divyanshu

TFS 2012 Update 4 - Build Alert - "A build controller or agent's status changes" doesn't work correctly

We are running TFS2012 Update 4 and have set up some build alerts. The alert we have set up is "A build controller or agent's status changes". When this alert is first set up the default filters which are included are for fields "Team
Project" and "Status". However through much testing we have discovered that when either of these fields are included as a filter the alert doesn't work. When other fields are used in the filter the alert works fine (as long
as neither of the stated fields are included), indeed if all alert filters are removed then the alert also works successfully. Has anyone else experienced this? Is there an issue with the fields "Team Project" and "Status"?

Hi T Quinn,
Thanks for your post.
I reproduced this scenario in my TFS 2012 Update 4 Server and received the same result.
For this scenario, please submit it to Microsoft Connect Feedback portal at:
https://connect.microsoft.com/VisualStudio. Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Extended Idoc FIDCCP02 - getting status code 02

Hello Friends,
I am extending Idoc FIDCCP02 with an custom segment. I have followed this steps
Created Segment - Created Extended Idoc with Custom Segment created - Released both Segment and Idoc - Attached Idoc to FIDDC2 message type - Added message type to model view - maitained partner Profiles with extended idoc - created port type 'G' - Added necessary code in user exit (I am able to view data in my custom segment)
The Problem is - If I do not maintain Extended Idoc in partner profiles - I get Idoc XML created in external system with status code 03
But once I add extended idoc to the partner profiles - I get Status Code 02 with error saying Error in passing data to HTTP Port 500 internal Server error
Kindly can some body help me if I am missing some steps.
Thanks for help.

Dear Vasu,
I am creating Z message type, when I am creating that idoc (I have used XML Port) its initially comes in status 30 (IDoc ready for dispatch (ALE service)).
Now when I process this idoc with tcode WE19 then it give status 02 (Error passing data to port). Please suggest where i am doing mistake.
Your help will be appreciated.
Regards, Vicky M. Khambhati

If my computer gets unexpectedly shutdown then why on restarting computer firefox keeps me logged in even when saving password is disabled ?

my computer gets unexpectedly shutdown while i was logged in my gmail and facebook account and when restarted my system and opened facebook and gmail ,i found that i was logged in.This is when i have unchecked ''''''password remember'''''' option and '''keep me logged in''' option .How to solve it ?

* [[/questions/876494]]
You can set the pref <b>browser.sessionstore.privacy_level</b> to 2 (never) or 1 (non-HTTPS, default in Firefox 3 versions) on the <b>about:config</b> page to disable saving cookies via session restore.
You can change the browser.sessionstore.privacy_level_deferred pref that is used when you do not reopen the previous session automatically via "Show my windows and tabs from last time".
* http://kb.mozillazine.org/browser.sessionstore.privacy_level

Getting status as ERROR while instantiating Business Object in work flow?

Hi,
Getting status as ERROR while instantiating Business Object in work flow.
How to rectify it.
Tahnks in Advance.
Moderator message: please have a look at the dedicated Workflow forum on SCN.
Edited by: Thomas Zloch on Jan 19, 2012

Hi,
Go to SWDD and create a new workflow. This workflow will have two steps. This is just for test purpose so we are not going to define any triggering event etc. First step will instantiate (creating a runtime object) a business object and second step will use that runtime object to execute one of its method. We know that to instantiate any BO we need the object key to be passed. Key uniquely identifies a runtime instance of Business Object (henceforth we will refer it as BO or business object interchangeably).
use Business Object SYSTEM and method GENERICINSTANTIATE to instantiate any Business Object in workflow

How to get status of transaction

Hi Gurus,
can anyone tell me how to get status of the transaction in crm.
regards,

hi vijay,
what kind of transaction did you want to get the status ?
for order, complaint, activity, and task, you can used function modul 'CRM_ORDER_READ' for getting status of the document.
hopes it helps
cheers

Zend core xe / doesn't display server conf Unable to get status information

HI,
i've installed zend core + oracle xe.
However in zend core / system overview section i cannot read any info.
I got the message:
Unable to get status information from the web server.
Either the server-status module is not loaded, or it is not properly configured.
To load server-status module (if your server was not compiled with it),
please insert following string into your apache configuration file:
LoadModule status_module modules/mod_status.so
To configure it, please insert following section:
<Location /server-status>
SetHandler server-status
Order deny, allow
Deny from all
Allow from localhost
</Location>
I've enabled LoadModule status_module modules/mod_status.so
I've added SetHandler server-status to existing /zendcore serve alias
any idea
thanx

Hey,
i've fixed.
However i got this problem with zend core 1.31 windows / oracle xe / apache:
1 - I've removed the old one and apache 2 (last version) 2.058.
2 - Then i've searched all the registry key (apache / zend related) and erased them.
3 - Last step: installed zend core 1.4 (with the bundled version of the apache 2).
It works.
Note: for me you have always to delete all the apache group previous installation as well as the zend directory.
These directory are not deleted automatically by uninstall process.

GET RESPONSE and GET STATUS

Hi all,
I wish some information about use of get response and get status commands or where I can find answer to my questions.

Hi, GET STATUS command description can be found in GlobalPlatform 2.1.1 specification and ISO/IEC 7816-4 standard.
GET RESPONSE is described in ISO/IEC 7816-4 and 7816-3 standards.
Best regards,
Eve

SQL Server Status SHUTDOWN | Normal

Hi
I have one sql 2008 database .TDP backup is running for this server.now I am not able to take log backup on this server.It is failing.When I checked the database properties I found that status - Shutdown | Normal.
I am able to access this database and application is working fine and I am able to take SQL Native backup also.
Why this status showing Shutdown | Normal ?,Anybody can help me on this.

Now I found one more thing.
Actually this db is in mirroring .When I checked sys.databases I found that is_cleanly_shutdown column showing value 1
How I can make it to 0 ?Restart of SQL Server will resolve ?
If the Mirroring session is active, backup is not allowed on the database. More details
here.
Pradeep Adiga
Blog: sqldbadiaries.com
Twitter: @PradeepAdiga

SAPCCMSR agent gets status SHUTDOWN

Similar Messages

Maybe you are looking for