SAP产品简介:SAP BusinessObjects Edge BI

SAP® BusinessObjectsu2122Edge BI 软件是希望改进商务智能（BI）流程并在竞争中胜出的中型企业的理想选择。它可以帮助您解决任何BI 要求，并且充分利用公司已经使用的应用程序、数据源和平台。
下载网址：http://www.bestsapchina.com/downloads/CNY09/brochure/Product_brief_Edge_BI.pdf

Hi,
My apologies.  I was wrong.
The BI 4.0 Edge version has been out since 9/16/2011 per the PAM
https://websmp209.sap-ag.de/pam
However the trial Edge version is for 3.1 only.
Regards,
Tammy

Similar Messages

  • The difference SAP BusinessObjects BI Suite and SAP BusinessObjects EDGE BI Suite

    Hi all,
    Would you please explain what is the difference of SAP BusinessObjects BI Suite and SAP BusinessObjects EDGE BI Suite..?

    Key difference:
    Edge BI Suite does not allow you to do clustering of nodes, but the BI Suite does.  This flexibility is restricted in Edge - so it's a single server setup.
    Both SAP BusinessObjects Edge BI and SAP BusinessObjects Enterprise share the same underlying platform and tools.  The difference is that Edge BI is designed and priced for mid-sized organizations, and is therefore licensed differently. 
    SAP BusinessObjects Edge BI is licensed for both named-user licenses and concurrent access licenses (CAL). While named-user licenses are appropriate for users who are active in the system throughout most of the day, the concurrent access license provides an economical way to support casual system users. A single CAL license will typically support 5-10 users, depending on the type of usage they require.
    While Enterprise (BI Suite) can be implemented for unlimited users across multiple servers and includes clustering and failover capabilities, Edge BI is restricted to a single server and a user count more appropriate for mid-sized organizations.
    You can always upgrade to SAP BI Suite if requirement grows and easily migrate all of your BI content including users, groups, reports, dashboards and universes.
    The decision now depends on your investment and the allocated budget. I hope this helps.

  • Dashboard builder with SAP BusinessObjects Edge BI 3.1

    Hi,
    is it possible to install / activate the Dashboard builder with the trial version of the <a href="http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx">SAP BusinessObjects Edge BI 3.1</a>?
    I have read a couple of OSS-notes about the Dashboard-builder, but they all describe this feature for BObj Enterprise.
    Any help on this?

    I have a greyed out button "Dashboards" on the top bar in my InfoView.
    There is no server for Dashboards visible in my CCM.
    What I do have is a PerformanceManagement.war in my BObj-installation (which I deployed into my TomCat).
    Any help on activating the Dashboard-builder with the Edge-BI-trial?

  • Download SAP businessobject edge with DI xi3.2

    Hi all,
    I manage to find the download for SAP business edge DS XI3.2 but i am unable to find the download for the businessobject edge xi3.2. Can anyone plese advice me where i can download the BUsinessobject edge xi3.2. THanks.
    Regards.

    The correct download path is:
    Installations and Upgrades >> Entry by Application Group >> SAP BusinessObjects portfolio >> SBOP DQM FOR SAP SOLUTIONS >> BOBJ DQM FOR SAP SOL. XI3.1
    But it looks like you don't have this entry when you login to SMP. So this means you company's account is not linked to a valid contract from DQM for SAP ERP/CRM. To fix this, you should open a support ticket with the component XX-INT-DATA, this will route your message to the order management/contract team who can figure out what the issue is.

  • SAP Business Objects Edge 3.0

    Hi Gurus,
    I was downloaded the SAP Business objects Edge 3.0 Trial version from SAP. I am using SAP 4.7 with oracle 9.2 DB... I want to integrate Edge 3.0 with our SAP for reporting purpose.. Please explain how can i configure this and what are the other softwares are required for this. I go throw the guides but i am not getting clear idea.
    Now i just installed the business objects enterprise in one system web console are login correctly.
    But i don't know how to connect my SAP DB with this.
    Please help me.
    Regards
    Mahendran

    Hi,
    you still need the mentioned software packages even if you do not have an SAP BI system. You can  also configure your SAP R/3 system to do the BO authentication. The main difference is that you have to use crystal reports in order to access the data in your SAP system. You cannot report using Web Intelligence (universes) on an SAP R/3 data source. 
    So you have to do the following:
    1) Install the SAP BusinessObjects Edge 3.0 software on host A
    2) Install the Crystal Reports Designer 2008 V0 on host B (HostA and hostB can also be the same computer)
    3) Install the Java Connector 2.1.8 on host A ([http://service.sap.com\connectors]). You will find more information on this in the installation guide of the integration Kit for SAP solutions.
    3) Install the BOBJ integration Kit for SAP solutions XI 3.0 on host A (Choose the server option in the installation). Please follow the instructions in the installation guide on how to do this.
    4) If hostA and hostB are two different machines then please install also the BOBJ integration Kit for SAP solutions XI 3.0 on host B (Choose the desktop option in the installation) 
    5) Import the transports delivered in the integration KIT for SAP solutions in your SAP R/3 system (Check the installation guide for more information on these steps)
    6) Configure the SAP authentication in your BOBJ Edge system (necessary if you want to logon with your SAP credentials in BOBJ)
    This way you should be able to create reports based on  your SAP R/3 data.
    Regards,
    Stratos

  • Com.sap.isa.businessobject.BORuntimeException: No entry for User Business O

    Hi all,
    Kindly be informed that I get the following error while logging on to the B2B webshop from the B2B portal.
    Your thoughts on this would be greatly appreciated.
    com.sap.isa.businessobject.BORuntimeException: No entry for User Business Object found
    at com.sap.isa.businessobject.BusinessObjectHelper.splitException(BusinessObjectHelper.java:78)
    at com.sap.isa.user.businessobject.UserBase.isUmeLogonEnabled(UserBase.java:541)
    at com.sap.isa.user.action.UserActions.isUmeLogonEnabled(UserActions.java:579)
    at com.sap.isa.user.action.UserActions.performUmeLogin(UserActions.java:443)
    at com.sap.isa.user.action.UserBaseAction.performUMELogin(UserBaseAction.java:89)
    at com.sap.isa.user.action.PrepareLoginBaseAction.ecomPerform(PrepareLoginBaseAction.java:138)
    at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
    at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:427)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:358)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:427)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:358)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1012)
    at com.sap.isa.core.RequestProcessor.processForward(RequestProcessor.java:643)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:260)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
    at com.tealeaf.capture.LiteFilter.doFilter(LiteFilter.java:98)
    at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(AccessController.java:215)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Awaiting your earliest reply
    Thanks
    Mutu...

    Its a late response... but if someone gets the same issue here is the solution.
    When you register try uppercase password . That should take care of that issue.
    The problem is with function module CRM_ISA_IUSER_SWITCH , Note 946536.
    Although the note says 5.0 the problem exists with ISA 4.0 too

  • Product: BusinessObjects Edge Series 3.0 -- Error 2902. Operation ixfAssemb

    Good Afternoon.
    I want to upgrade XIR3 to XIR3.1 for enabling IIS+SSO with Active Directory.
    But when I want to upgrade my system, I have the Following error:
    Product: BusinessObjects Edge Series 3.0 -- Error 2902. Operation ixfAssemblyCopy called out of sequence.
    Windows Server 2003 SP2 (Fully Patched)
    BusinessObjects Edge Standard XI 3.0 Windows (working)
    Patch I want to Install: 51036069.exe ,BusinessObjects Enterprise XI 3.1 FixPack 1.1 - WIN - INTL
    Thanks in advance for your help

    Hi All,
    Please clarify my following doubt,
    We are migrating from BO 6.5 to BO XI 3.1 intergrating with our application.
    I want to use the COM XI 3.1 SDK for the Desktop Intelligence. I did some code changes in the previous 6.5 SDK which we already used.
    Say, I changed the LoginAs() method to Logon() in the C++ file.When I tried to create the .dll file using Visual Studio 6.0, I got the following error,
    'Logon' is not the member of Application class.
    From this message, I understood that, still Application class of BO 6.5 was used and not BO xi and some libraries were also missing.
    Please correct me, if my understanding is wrong.
    Where can I get the BO xi 3.1 com SDK for DESKI? When searched in SAP portal, I get only the API reference and Developer guides.
    Thanks.

  • Error during installation SAP SAP NetWeaver Developer Studio

    Hello,
    Can somebody help installing SAP SAP NetWeaver Developer Studio?
    I get the message:
    SAP NetWeaver Developer Studio 2.0.0. Setup Wizard not Completed
    The SAP NetWeaver Developer Studio 2.0.0 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
    Click Finish to exit the wizard.
    The following program files could not be installed:
         c:\documents and settings\all users\documenten\sap\workspace\.metadata\.plugins\org.eclipse.jdt.launching\vmconfiguration.xml
    The installed applications may not function correctly until all program files are successfully installed. For detailed error descriptions, please open file://D:\IDE\setup\saplogvw.exe .
    The following program files could not be installed:
         c:\documents and settings\all users\documenten\sap\workspace\.metadata\.plugins\org.eclipse.jdt.launching\vmconfiguration.xml
    The installed applications may not function correctly until all program files are successfully installed. For detailed error descriptions, please open file://D:\IDE\setup\saplogvw.exe .
    It looks like a Windows XP problem, because manually I can't copy or create a file in de directory:
    C:\Documents and Settings\All Users\Documenten
    So the following directory doesn't exits:
    c:\documents and settings\all users\documenten\sap\workspace\.metadata\.plugins\org.eclipse.jdt.launching\
    It's weird that I don't have access to the "Documenten" directory (this is the dutch Shared-documents-directory) , because I never changed it.
    When I right-click the directory "Documenten", and I go to Properties, then I don't see a tab setting access groups.
    How can I get access again to the "Documenten"-directory?
    Kind regards,
    Alwin.

    Sunil,
         There is a NW-DS version on the NW4 test drive DVD given out at TechED which I believe was also posted on the ftp.sap.com before TechEd '04 for CeBit 2004. I personally would like to put my vote out there for getting preview versions to the hands of admins to install and kick the tires before we try to convince management to buyin to purchase a product. Another way SAP reduces TCO?
    Bill

  • URI /sap/bc/bsp/sap/ is redirected to /sap/sap(bD1kZSZjPTEwMA==)/bc/bsp/sap

    Hi,
    we have a Apache Reverse Proxy calling an BSP on an NW7 AS ABAP System.
    The URI which is called by the proxy is:
    /sap/bc/bsp/sap/xyz/xyz.htm
    After this request, the proxy does a new request with the session information included:
    /sap/sap(bD1kZSZjPTEwMA==)/bc/bsp/sap/xyz/xyz.htm
    So... he has added the session info ("bD1kZSZjPTEwMA==") plus an additional /sap/ ... so with the additional /sap/ it's not working. What's the problem here?
    Because we have a reverse proxy in front, I tried to solve the problem with a RewriteRule:
    RewriteRule ^sap/sap\((.)\)(.) https://server:44300/sap($0)$1 [P]
    without success...
    Do you know why the RewriteRule is not working or why he is adding the additional /sap/ in front of the URI?
    Thanks!
    BR,
    Markus

    Hi,
    >After this request, the proxy does a new request with the session information included:
    >/sap/sap(bD1kZSZjPTEwMA==)/bc/bsp/sap/xyz/xyz.htm
    This is the classical URL mangling problem.
    Yes you have to use Apache URL rewrite rules such as
    RewriteRule  ^/(sap\(.*)    https://server:44300/  [P]
    Check the SDN wiki on reverse proxies, it has really good information.
    Regards,
    Olivier

  • MaxDB-Can't open registry key "HKEY_LOCAL-MACHINE\SOFTWARE\SAP\SAP DBTECH"

    Hi,
    We are using MI 7.10, NW client 7.1SP10, MaxDB 7.7.07 Build 30, Mobile Client 7.10 SP10 Patch 08, JRE Java 1.6u24, MI 7.10, Windows Vista, Service pack 2.
    Turned UAC off from control panel and registry, ran as Administrator, installed mobile client and MaxDB with a fresh OS, got below error, when uninstalling MaxDB, it couldn't uninstall, complaining "No Installed MaxDB components found",  can't delete this registry.  I've googled this for while, but couldn't find any solution, can anyone here please help?!
    INSTALLER_INFO: Version = 7.7.07 Build 030-123-241-764
    INSTALLER_INFO: Changelist = 241764
    INSTALLER_INFO: MakeId = 527288
    INSTALLER_INFO: Type = kit
    SYS_INFO: Host name = UVA421-78062083
    SYS_INFO: System = Windows
    SYS_INFO: Architecture = I386
    SYS_INFO: Version = NT 6.0
    SYS_INFO: Subversion = Service Pack 2
    CALL: SDBINST -b -t sapmc -f C:\Program Files\SAP Netweaver Mobile Client\MaxDB Files\sdb_MIDB_sample.cfg
    Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
    Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
    Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
    Can't open registry key "HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP DBTech":
    Thanks,
    Grace
    Edited by: Grace Mu on Jul 22, 2011 6:10 PM

    Thank you Srikishan, I reviewed the link you provided, it solves uninstall and re-install problem for one laptop, however, we have many laptops, can't do manual registry clean up for all of them. The installation was done by mobile client silent script, needs to be successful the very first time.
    This error only happens with the very 1st installation, means fresh OS that never had any SAP, I am wondering what is the installation program trying to change in the registry, does it have to go that deep into registry? and what other components are affected by the error "Can't open registry key "HKEY_LOCAL-MACHINE\SOFTWARE\SAP\SAP DBTECH"?
    From the log, the command ran before the error was "CALL: SDBINST -b -t sapmc -f C:\Program Files\SAP Netweaver Mobile Client\MaxDB Files\sdb_MIDB_sample.cfg", is it a sample program and do we need it? is this caused the error?
    for remaining errors(many of them), there is one very odd
    "SYS: "c:\sdb\programs\runtime\7300\bin\irconf.exe" -i -p "c:\sdb\programs\runtime\7300": Error : Cannot find any installed version of CPC Driver.."
    What caused it?
    Thanks,
    Grace
    Edited by: Grace Mu on Jul 25, 2011 4:34 PM
    Edited by: Grace Mu on Jul 25, 2011 4:37 PM

  • Survey on Impact of SAP & SAP BW in an organization

    Hi Experts,
      I am doing my thesis to measure the impact of SAP & SAP in real time decesion making in an organization
    My areas of concentration in sap bw
    Flexiability it offeres,Reports...
    Please advise me what type of questions can i ask the business users & technical users of SAP & SAP BW to measure the impact of BW in an organization
    Thanks

    Hi Mandeep,
    This thread may be a useful reference for you: Why the open file dialog form goes to SAP background.
    Regards
    Aravind

  • SAP创新社区(SAP Community Network)中文博客网站上线了, 写中文博客可获SCN积分

    中文博客积分已加入大家的SCN帐号，好多人一下子进帐几百点。大家快去看看吧！
    如果你没有拿到积分，那是因为你没有将自己的SCN ID填写到你的博客信息里。快点完成这一操作！请[阅读操作指南|http://scnblogs.techweb.com.cn/scnchina/archives/201.html]
    查看[积分能干什么|http://scnblogs.techweb.com.cn/scnchina/archives/139.html]
    中文博客首页： http://scnblogs.techweb.com.cn/
    SAP 创新社区中文博客网站为SAP技术界广大的中文读者创造了一个运用中文交流的平台，让想阅读SAP相关博文的中国读者不用再东奔西跑，到中文博客就能将精彩内容尽收眼底。据悉，数位来自SAP的专家将率先到中文博客网站开博。
    如果你也是SAP技术界的一员，并且愿意通过博客与大家分享你的SAP旅途见闻，我们虚位以待，静候光临！
    欢迎大家来到这里来开博，博文内容范围：
    1. 讨论交流如何IT能够更好地帮助公司业务和管理
    2. 讨论交流企业管理
    3. 讨论交流SAP产品，技术和解决方案的知识，最佳实践，实施经验，使用技巧等等。
    SAP创新社区
    Edited by: Cathy Yang on Dec 15, 2009 4:26 AM

    谢谢柯工。博客积分一般会在每两周审核并加分，根据博文的质量会决定积分，范围在0-120分，如果是视频或音频播文的话，积分会在100到300分之间。
    [观看视频博文例子|http://scnblogs.techweb.com.cn/scnchina/archives/100.html]
    [如何在一般博文里添加视频，音频或Flash demo|http://scnblogs.techweb.com.cn/scnchina/archives/176.html]

  • Installation of BusinessObjects Edge Series 3.0 Failed

    Hi,
    Currently I'm trying to install BusinessObjects Edge Series 3.0, it prompt me with
    "CRC failed in Collaterals\Add-Ons\Performance Management Deployment Tool\DeploymentToolv2.zip
    Unexpected end of archive".
    So what can I do to solve this?
    Cheers,
    Priscilla

    Hi,
    What is the installation media you are using
    *) if you ftp'd the software, please make sure you use 'bin" as the transfer mode.
    *) If you have copied the disk contents, make sure, the contents are copied completely and there is no difference in the content.
    Regards,
    Balakrishna BK

  • Indicator: automatic fixing of planned orders sap (SAP Filed name: PFREI)

    Hi Experts,
    Where can the Indicator: automatic fixing of planned orders sap (SAP Filed name: PFREI) be found in the material master?

    not directly controlled in the material master
    If planned orders are fixed is defined in customizing of MRP types (V438A-FXART)
    and the MRP type is entered in material master (MARC-DISMM)

  • When will SAP BusinessObjects Edge 3.2 be released to customer ?

    Hi,
    Is there anybody who has this information ?
    My Japanse customer needs to upgrade from 3.0 to 3.2 to use Data Services XI 3.2  for the new option "Data Alignment" in fixed-width file formats.
    3.0 and 3.1 only supports "character data alignment" but Japansese customer needs "byte data alignment", this option enables it.
    There is no workaround for this problem in 3.0 and 3.1 except for changing source data formats in the source system.
    Regards,
    M.Sugihara

    Hi,
    as far as I know this (Edge 3.2) should not be out until the end of this year. But I would suggest to issue an OSS message [http://service.sap.com/support] in order to get an official statement on this.
    Regards,
    Stratos

Maybe you are looking for