SAPconnect fax error email

We have successfully configured SAPconnect to send faxes to a RightFax server, and are receiving synchronous responses and asynchronous status calls, viewable in SOST. This has been working for a couple of years. However, we have a new request that users receive an email notification if there is an error in sending one of their faxes, so that they don't have to go into SOST to look for error statuses.
I have reviewed the relevant documentation, and found several Notes (especially 335310, 960880) that point to problems when send email notifications of statuses has been configured. I also reviewed documentation and Notes on alert monitoring. But I am unable to find any documenation on how to configure SAPconnect to send email notifications of failed faxes to the user who sent them.
Can someone please point me in the right direction?

I'm sorry for the delayed response. I just noticed this message, and I hope you already figured it out.
I used SO36 to set up automatic forwarding. This will intercept all SAPOffice messages and send them to a designated email address that you specify for a specific time period (you can set it to 12.31.9999 to make it permanent).
In our environment, we have "resource" email accounts that are shared by admins that can then process the emails (usually failure notifications).

Similar Messages

Faxing or email Purchase Order

Hi Guru's
I'm in a process of setting-up the message types to allow the faxing and emailing of the Purchase Orders. After defining the message types, selelcting the appropriate output types NEU and chose the Simple mail medium and linked to the appropriate program together with the form and unfortunately the message is not out-putted to the fax dispite the successful status with a warning reads: *No print-relevant changes to document 4501110167 exist*
Colleagues, please indicate whether I have missed something or doing it incorrectly.
Your help will be appreciated
regards,
Edited by: JML Nkgapele on Nov 20, 2009 10:43 AM

Hi Guru's ,
Whiles creating the PO the system generates the PO number and terminates the transaction in retuns pops-up my SAP in-box screen with the message below: Update was terminated
System ID....   TOY
Client.......   455
User.....   6902255311
Transaction..   ME21N
Update key...   4B09DBFE79B30086E1008000C0A80391
Generated....   23.11.2009, 09:03:07
Completed....   23.11.2009, 09:03:08
Error Info...   Maintain an output device in your user master record
Please, please help am now getting frustrated now.

Recent Printer Update screwed up my fax to email option

I have an HP - Officejet Pro X476dw Wireless All-In-One Printer that worked fine, converting my faxes to pdf files and forwarding them to my email. After I receieved notice from the printer screen that an update was available, I updated. This morning, the lights were going crazy on my printer screen. I hit the power switch and the printer came back online. There is an error mark next to the fax icon. It reads that the the server is rejecting the security setting. I went back in and redid everything the same way it was... no go. I can receive faxes, but they are not forwarded to my email.
How do I get rid of the update that caused this problem, or how can I fix it?
All help is appreciated.

For the second time, I woke up to find the lights on the small screen on the printer flashing as if a pinball machine got tilted. Tapping the screen wouldn't stop it. I had to hit the power switch and then the machine came back online. There was an error on the fax icon at first reading that the name was incorrect. Then it went on to read that the server could not accept the secure connection. When I try to edit the fax to email software on my computer the HP error states that it cannot be sent to the "to" email. This is ridiculous. It worked fine with the exact same settings for a whole year. Then when the printer updates itself... it's screwed. How can I get this thing back and working? This is my business here?

Problems routing faxes through email

I have a Windows Server 2008 fax server that is giving me some problems when trying to route inbound faxes via email.
Sometimes it will work, and then eventually an inbound fax will get stuck with a status of "Retrying Routing" when viewing it in the Windows XP Fax Console on the client. When this happens, the fax server will record the following 2 events in the Application event log:
Event ID: 32083   Source: Microsoft Fax   Task Category: Inbound   User: N/A
Unable to route fax C:\ProgramData\Microsoft\Windows NT\MSFax\Queue\1C9889BC4B822.tif to the requested e-mail address.
The following error occurred: 0x80040211
This error code indicates the cause of the error.
Check the SMTP server configuration, and correct any anomalies.
Event ID: 32089   Source: Microsoft Fax   Task Category: Inbound   User: N/A
The Fax Service failed to execute a specific routing method. The service will retry to route the fax according to the retries configuration. If the retries fail, verify routing method configuration.
Job ID: 0x0401c9889bc4b822.
Received on Device: 'Conexant D850 PCI V.92 Modem'
Sent from: '123123456'
Received file name: 'C:\ProgramData\Microsoft\Windows NT\MSFax\Queue\1C9889BC4B822.tif'.
Routing extension name: 'Microsoft Routing Extension'
Routing method name: 'Route through e-mail'
Sometimes, the fax will eventually go through. Other times, it will fail completely. If it fails completely, the following event is logged in the Application event log and all faxes after this one will fail too.
Event ID: 32078   Source: Microsoft Fax   Task Category: Inbound   User: N/A
A successfully received fax was not routed automatically. You can find the fax in the Inbox/Incoming archive folder by its Job ID. Job ID: 0x0401c988900827e4. Received on Device: 'Conexant D850 PCI V.92 Modem' Sent from: '987-654-3210'
If I clear all the stuck faxes out of the "Incomming" folder of the fax console, then future faxes might come through successfully (by clear I mean delete them).
I followed the instructions from the following link to get an authenticated user set up instead of using anonymous, but that hasn't helped.
http://blogs.technet.com/sbs/archive/2007/04/02/inbound-fax-routing-may-fail-due-to-the-exchange-intelligent-message-filter-imf.aspx
Any help anyone has would be greatly appreciated as this is getting frustrating.
Thanks!

Hi,
According to your description, I understand that you have problem with routing faxes through email. You may implement the action plan below to address this issue.
Action plan:
================
1. Check Exchange setting.
2. Please follow SBS blog, check Exchange System Manager for the following setting and remove it if it exists:
http://blogs.technet.com/sbs/archive/2007/01/15/fax-fails-because-of-orbs.aspx
3. Disable your antivirus software and retest.
4. If you are running AVG 8 which has SPAM filtering capabilities. Go into Server Manager and configure the associated service to DISABLED:
5. Reboot the server and confirm the service is not running within Server Manager
6. Retest sending faxes to the server and note the results.
If the issue persists, then clean-boot the server and retest again. Use msconfig to disable all third party services and startup programs.
1.Launch MSCONFIG.exe on the server.
2.Under the General tab, select "Selective Startup" and uncheck all of the sub-items except for "Load System Services"
3.Choose the Services tab and then select the "Hide all Microsoft Services" option.
4.Click the "DISABLE ALL" button to disable the list of third-party services.
5.Choose the APPLY and the CLOSE button. Then Restart.
Regards,
Nick Gu - MSFT

Sap to fax or email

how can i send the print program of smartform to E-mail or fax.

Follow below steps in the main program:
1. Set print parameters.
2. Use the below code in step 2,
IF ENT_RETCO = 3 AND
NAST-NACHA = '5'.
ENT_RETCO = 0.
LS_CONTROL_PARAM-GETOTF = 'X'.
LS_CONTROL_PARAM-NO_DIALOG = 'X'.
LS_CONTROL_PARAM-PREVIEW = 'X'. "SCREEN.
LS_CONTROL_PARAM-LANGU = NAST-SPRAS.
ENDIF.
3. Use FM SSF_FUNCTION_MODULE_NAME
4. lastly use FM LF_FM_NAME
2.program.
Use the following function module(CONVERT_OTF) to convert Samrtform output to PDF:
DATA: v_size TYPE i,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname = 'Z_SMTF'
    IMPORTING
      fm_name = v_fname.
CALL FUNCTION v_fname
    EXPORTING
      control_parameters = x_ctrl_p
    IMPORTING
      job_output_info    = x_output_data.
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format                = 'PDF'
      max_linewidth         = 134
    IMPORTING
      bin_filesize          = v_size
    TABLES
      otf                   = x_output_data-otfdata
      lines                 = it_lines
    EXCEPTIONS
      err_max_linewidth     = 1
      err_format            = 2
      err_conv_not_possible = 3
      OTHERS                = 4.
3 PROGRAM.
Local data:
DATA:
ls_control_param TYPE ssfctrlop, "Control paramters
ls_output_options TYPE ssfcompop. "Output options
Data for email smart form:
DATA:
lv_ip_mailaddr TYPE so_name, "Address of a Mail Recipient
lv_ip_type_id TYPE so_escape, "Recipient type
ls_recipient_id TYPE swotobjid, "Structure for recvr obj ID
ls_sender_id TYPE swotobjid. "Structure for sender obj id
Constants:
CONSTANTS:
lc_ip_type_id TYPE so_escape VALUE 'U', "For internet address.
lc_smartform TYPE tdsfname VALUE 'ZVSF_ASN_DELNOTE', "Smart form name
lc_mail TYPE tddevice VALUE 'MAIL'. "Mail device
Assign recipient
lv_ip_mailaddr = gv_smtp_addr. "CSAM email id
lv_ip_type_id = lc_ip_type_id. "External address
Create Mail title
CONCATENATE text-001
nast-objky
INTO ls_output_options-tdtitle.
Create recipient object
CALL FUNCTION 'CREATE_RECIPIENT_OBJ_PPF'
EXPORTING
ip_mailaddr = lv_ip_mailaddr
ip_type_id = lv_ip_type_id
IMPORTING
ep_recipient_id = ls_recipient_id
EXCEPTIONS
invalid_recipient = 1
OTHERS = 2.
IF sy-subrc <> 0.
error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Get sender object id.
CALL FUNCTION 'CREATE_SENDER_OBJECT_PPF'
EXPORTING
ip_sender = sy-uname
IMPORTING
ep_sender_id = ls_sender_id
EXCEPTIONS
invalid_sender = 1
OTHERS = 2.
IF sy-subrc <> 0.
error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Assign the smart form name
w_ssfname = lc_smartform.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_ssfname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Control parameters.
For Print output:
IF nast-nacha = '1'. "Print output
ls_control_param-preview = 'X'.
ls_control_param-no_dialog = 'X'.
ENDIF.
For fax/email output.
IF nast-nacha = '2'. "Fax/Email
Output options
ls_output_options-tdteleland = gs_kna1-land1.
ls_output_options-tdtelenum = gs_kna1-telfx.
ls_output_options-tdfaxuser = sy-uname.
ls_output_options-BCS_COMMIT = 'X'.
ls_control_param-device = lc_mail.
ENDIF.
dynamically call Fm behind the Smart form
CALL FUNCTION lf_fm_name
EXPORTING
control_parameters = ls_control_param
mail_recipient = ls_recipient_id
mail_sender = ls_sender_id
output_options = ls_output_options
user_settings = ' '
TABLES
delivery = gt_delivery
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
Error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
IF NAST-NACHA = '2'.
ls_control_param-device = 'TELEFAX'.
CALL FUNCTION lf_fm_name
EXPORTING
control_parameters = ls_control_param
mail_recipient = ls_recipient_id
mail_sender = ls_sender_id
output_options = ls_output_options
user_settings = ' '
TABLES
delivery = gt_delivery
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
Error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
ENDIF.
Local data:
DATA:
ls_control_param TYPE ssfctrlop, "Control paramters
ls_output_options TYPE ssfcompop. "Output options
Data for email smart form:
DATA:
lv_ip_mailaddr TYPE so_name, "Address of a Mail Recipient
lv_ip_type_id TYPE so_escape, "Recipient type
ls_recipient_id TYPE swotobjid, "Structure for recvr obj ID
ls_sender_id TYPE swotobjid. "Structure for sender obj id
Constants:
CONSTANTS:
lc_ip_type_id TYPE so_escape VALUE 'U', "For internet address.
lc_smartform TYPE tdsfname VALUE 'ZVSF_ASN_DELNOTE', "Smart form name
lc_mail TYPE tddevice VALUE 'MAIL'. "Mail device
Assign recipient
lv_ip_mailaddr = gv_smtp_addr. "CSAM email id
lv_ip_type_id = lc_ip_type_id. "External address
Create Mail title
CONCATENATE text-001
nast-objky
INTO ls_output_options-tdtitle.
Create recipient object
CALL FUNCTION 'CREATE_RECIPIENT_OBJ_PPF'
EXPORTING
ip_mailaddr = lv_ip_mailaddr
ip_type_id = lv_ip_type_id
IMPORTING
ep_recipient_id = ls_recipient_id
EXCEPTIONS
invalid_recipient = 1
OTHERS = 2.
IF sy-subrc <> 0.
error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Get sender object id.
CALL FUNCTION 'CREATE_SENDER_OBJECT_PPF'
EXPORTING
ip_sender = sy-uname
IMPORTING
ep_sender_id = ls_sender_id
EXCEPTIONS
invalid_sender = 1
OTHERS = 2.
IF sy-subrc <> 0.
error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Assign the smart form name
w_ssfname = lc_smartform.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_ssfname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Control parameters.
For Print output:
IF nast-nacha = '1'. "Print output
ls_control_param-preview = 'X'.
ls_control_param-no_dialog = 'X'.
ENDIF.
For fax/email output.
IF nast-nacha = '2'. "Fax/Email
Output options
ls_output_options-tdteleland = gs_kna1-land1.
ls_output_options-tdtelenum = gs_kna1-telfx.
ls_output_options-tdfaxuser = sy-uname.
ls_output_options-BCS_COMMIT = 'X'.
ls_control_param-device = lc_mail.
ENDIF.
dynamically call Fm behind the Smart form
CALL FUNCTION lf_fm_name
EXPORTING
control_parameters = ls_control_param
mail_recipient = ls_recipient_id
mail_sender = ls_sender_id
output_options = ls_output_options
user_settings = ' '
TABLES
delivery = gt_delivery
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
Error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
IF NAST-NACHA = '2'.
ls_control_param-device = 'TELEFAX'.
CALL FUNCTION lf_fm_name
EXPORTING
control_parameters = ls_control_param
mail_recipient = ls_recipient_id
mail_sender = ls_sender_id
output_options = ls_output_options
user_settings = ' '
TABLES
delivery = gt_delivery
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
Error handling
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
ENDIF.
More information.
Look at thi sblog, this is well explained about the Smartforms to send as a Fax and email ..
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp
and also look at this thread
Re: Smartforms to PDF
award points if it is helpful

HP Laserjet PRO 200 - Colour MFP M276n | Forward Fax to Email

Hi!
I can't understand why it isn't possibile to forward a fax to a list of email address instead of print them (or forward the fax to another number), it could really save a lot of paper, also because the printer can already send a scan to an email address.
Am I missing some some option in the control panel or am I really supposed to
print a fax and then scan it?
If this function is not available are you going to implement it in the next firmware update? I think it would be really appreciated!
Thanks!

Hi FrancescoPromo,
Welcome to the HP Forums, I hopeyou enjoy your experience!
I see from your post that you would like to know if you can forward a fax to email, if there are any updates for this available.
I will be happy to help you.
You can send and receive faxes from the computer software. You can fax single or multiple faxes at a time.
There is no option available for sending faxes through emails.
I have provided the manual with information for faxing. Pages 97 and 103 provide this process.
LASERJET PRO 200 COLOR MFP.
These are the available features for this model through the control panel.
Scan to USB Drive.
Scan to Network Folder.
Scan to E-mail.
Thank you for posting on the HP Forums.
Have a nice day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp Laserjet 200 Color MFP M276nw Fax error report

Hi Team
Will you please assist me in turning off , Fax error report ?
I have checked all the settings on this machine , i cant't find this setting, i want to turn off the error report on failed/error
faxes.
Regards
James R

Hi JamesR25,
Welcome to the HP Support Forums! I see you would like to turn off the Fax error reports on your HP Laserjet 200 Color MFP M276nw.
From the front panel of your LJ, please follow the path below:
Setup Menu > Fax Setup > Advance Setup > Allow Fax Reports > NO or Off
You should not receive anymore fax error reports.
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Fax Error Report

Hi all,
I am getting a fax error report that prints randomly and is not followed by a received fax. I ran the fax test and it passed and came back without any known problems. I have been receiving faxes daily, but not as many as before and I am wondering if I am not receiving faxes. The error report does not show where the fax came from.
Can anyone help?
Appreciative,
kelseypt

Hi kelseypt,
Welcome to the HP Support Forums! I see you keep getting Fax error reports printing from your HP Printer, this happens randomly.
To better assist you can you please let me know the following:
1. What is the Exact model of HP Printer you are using?
2. What is your current Operating system, Windows or Mac and which version?
3. How is the printer connected, USB or Wireless?
4. Do you get any error messages when you send a fax?
I look forward to hearing from you so we can get started!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Officejet Pro 8610 fax error message

Good morning. I have two Officejet Pro 8610s. One is in my office running MS Office 7, the other is at home running Mac.
To conserve power I have both printers set to turn off in the evenings. Neither is being used as a fax machine and neither has ever had the phone cord plugged in.
On both printers I am consistently getting the error message "Telephone cord is connected. To receive faxes, the printer must be turned on. Note that the printer is scheduled to be turned off at XX:XX every (days listed). To change the schedule, use the Schedule On and Off feature in the Setup menu."
Almost everytime I go to make copies or initiate a scan from the printer I have to click "OK" for this error. The error also pops up about every 30 minutes and makes a ding. This wouldn't be annoying at all except the printer is positioned next to my left ear and I"ve been listening to it for six months.
How do I stop these messages, aside from removing the scheduled turn off and on?
Thanks in advance for the assistance.

Hello @drummer12345 ,
Welcome to the HP forum.
I understand that you are getting a fax error message form your two 8610's. I would like to help you with this issue.
I find it odd that you get this message. You mentioned that you have never set the unit up for fax.
Please take a moment and make sure that no cords are plugged into the Fax ports on the printer.
If there are none, go into the setup menu.
Once in the setup menu, select the fax setup option.
Go into the advanced fax setup option.
scroll to the bottom of the list and select restore defaults.
If that does not work try a hard reset.
With the printer powered on, unplug the power cord.
Wait at least 30 seconds.
Plug the power cord back into the printer.
If this was happening to just one printer, I would believe this to be a firmware issue.
For this to happen to both your printers, I get a feeling it could be something related to the printers environment.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP officejet pro 8500 A909g Can not send emails from scan to e mail & Forward My Fax on Emails

I have Windows 7 home Premium os,
My earlier router malfunctioned so have installed new Dlink router DSL-2750U and after that i am not able to use scan to email & Fax to email options.
Email id to forward mail is a gmail id.
Please advice

Backing up a moment, how do you access your email;
Software based program (ex. MS outlook, aol desktop)
Web browser (ex. Google Chrome, Internet Explorer, Firefox)
Another method
Scanning to email requires a software based email to be open.
However, a work around may be present if you were able to provide the information stated above.
I am a HP employee.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

What causes the digital fax error to keep popping up on the touch scree

HP officejet pro 8500 wireless, the error message is digital fax error , what would cause that, Thanks Ted

http://www.verizonwireless.com/support/knowledge-base-87344/
Back up first though. Textra app works for pic messages. You cannot go back to previous software version

Maintaining Multiple Vendor Phone Fax and Email using IDOC

Hello Guru's,
I have a requirement where I must be able to maintain multiple phone and fax entries for all of our vendors. Is there a standard segment in IDOC CREMAS05 that will allow for this maintenance? Or will I have to use a separate BAPI / FM? I think there must be a standard way for doing this.
As of now it appears the CREMAS05 IDOC only supports the ability to maintain one phone/fax or email address at a time, which is in the LFA1 table, and not at the address table level (ADR2, ADRC, ADRT, etc.).
This is for an R/3 System running on EHP5.
Thanks,
Kohl Kemp
Edited by: Kohl Kemp on Jul 14, 2011 3:16 PM

I've never done this natively in CUC. Here's a guide that covers how to do it with the Fax server integration if that helps:
http://docwiki.cisco.com/wiki/Configuring_Fax_Detection_%28Single-Number_Voice_and_Fax%29_with_Cisco_Unity_Connection

Quering Fax and Email items in ICWebclient

In ICWebClient The agent send fax and email, In the activity Clipboard, it should "Fax Out" and "Email" but I am not sure how to search them in Inbox or somewhere else. In Inbox I am selecting "Fax" but it does not comeup with any result.
Can somebody provide some more details for these two items , how they handeled?
Thanks & regards,
Johar

In ICWebClient The agent send fax and email, In the activity Clipboard, it should "Fax Out" and "Email" but I am not sure how to search them in Inbox or somewhere else. In Inbox I am selecting "Fax" but it does not comeup with any result.
Can somebody provide some more details for these two items , how they handeled?
Thanks & regards,
Johar

Output Through FAX and Email for Order Confirmation

We are yet to have this in our system and in requirements gather phase for my FS. I request you to help me in finishing this .
so far i considered the following
The following information is required :
1. To all SD documents ? ( For eg : Order Confirmation,Delivery Note ,
Legal invoice )
2.Need to have a fax number/Email maintained for a customer
3. Frequency of the ouput?
4. Is duplication of output through email/Fax is required ?
5. If sent by mail, in simple mail/ an attachment in pdf required and
what shall the subject line contain?
Please guide if i am Missed any requirement gathering . pls write me or send some kindaa FS

Hi Yuvraj
Kindly check the links for the output configuration and other inputs also
[https://wiki.sdn.sap.com/wiki/display/ERPLO/OutputDeterminationOverview]
[https://wiki.sdn.sap.com/wiki/display/ABAP/SendSpoollistofbackgroundjobtoSAPinbox]
[https://wiki.sdn.sap.com/wiki/display/ABAP/PDFDownlaodByCreatingSpool+Request]
Regards
Srinath

Error Emails from BPM Process Administration Console

I am able to send error email to a single e-mail Id after configuring it in BPM Process Administrator(Engine-Networking tab).
How do I sent e-mail to multiple user?
I tried comma separated. It didnt work.
Anyone can help on this?
I get error something like below.....
will be notified. Original exception is: Illegal address Caused by: Illegal address java.io.IOException: Illegal address at fuego.io.SMTPClient.sendMail(SMTPClient.java:323) at fuego.io.SMTPClient.sendMail(SMTPClient.java:341) at fuego.server.service.MailNotificationDispatcher.sendNow(MailNotificationDispatcher.java:157) at fuego.ejbengine.service.EJBMailNotificationDispatcher.send(EJBMailNotificationDispatcher.java:55) at fuego.server.service.ServerMailLogOutput.doOutput(ServerMailLogOutput.java:116) at fuego.log.LogOutput.output(LogOutput.java:187) at fuego.log.LogSystem$LogItemDispatcher.logItems(LogSystem.java:980) at fuego.log.LogSystem$LogItemDispatcher.run(LogSystem.java:863) Caused by: javax.mail.internet.AddressException: Illegal address in string
Edited by: sideeque on Feb 16, 2011 7:56 AM

Not the answer you wanted and sure you already thought of this, but try using a group email address inside the Process Admin email field.
Dan

SAPconnect fax error email

Similar Messages

Maybe you are looking for