SAPConnect, Message no. XS 818, Cannot build CVL document.

We are facing one issue in SAPConnect transaction SCOT/SOST. Checking
the List in SOST, there are various fail transmission for FAX. The
error message is
Cannot process message in node (for reason, see long text)
Message no. XS 818
Diagnosis
The message could not be processed due to a technical error in the
node.
System Response
Processing was terminated.
Procedure
The reason is given in the details below.
Cannot build CVL document.
We have checked the SAPNet and search for OSS Note and we did not
find any SAP notes on this particular error message.
Can anyone tell me what is this error "Cannot build CVL document"
We are using RightFax to send the faxes. All RFC destination and ping to RightFax server working fine.
Any help on this will be highly appreciated.
Thanks in advance
Best Regards
CK

Hi
We had this same problem and found that the SQL Database on the RightFax Server was full and could
not extend any further, deleted records from database and problem was solved.
Regards
Prevan

Similar Messages

  • Not able to install Logic on mac with OSX.  10.8.2. Error message: Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported. I have logic studio 8 software purchased in 2007 and upgraded with logic studio 9 (purchased in 2009)

    After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
    What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
    Help!

    Mark,
    Sorry...
    I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
    My apologies and please ingnore those parts of my last post relating to the PPC Macs...
    You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer)  but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
    Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
    You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
    If the Logic Pro App is in your applications folder..
    Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
    Run Logic
    Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
    This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers...

  • Message E R7 005 cannot be processed in plugin mode HTTP

    Hi All,
    I test my BSP page with transaction : BPS_WB u2013 Customizing Web Interface Builder.
    I press u2018display previewu2019 to check layout and it displays well.
    If i have not change any data, it can save.
    But i has error when i change or input date and save it.
    The error message is "Message E R7 005 cannot be processed in plugin mode HTTP ".
    Does anyone have any idea about tracing/debug bsp page?
    BR.
    Wu

    Hi Tanguy,
    I have actived the InfoProvider of my InfoArea,but it still has an  error messge like before.
    After i trace the function, i find it is a sap program error(Note 1244874 - Inherited Error in RSDRI_CUBE_WRITE_PACKAGE).
    I will import SAP_BW SP20 and test the function again.
    Thanks for your advices.
    BR.
    Wu

  • Cannot Build

    Hi,
    I am getting the following message when I do ant build
    bash-2.03# ant build
    Buildfile: build.xml
    init:
    prepare:
    build:
    [javac] Modern compiler is not available - using classic compiler
    [javac] Compiling 1 source file to /usr/jwsdp1.0/docs/docs/tutorial/examples/gs/build/WEB-INF/classes
    BUILD FAILED
    /usr/jwsdp1.0/docs/docs/tutorial/examples/gs/build.xml:32: /usr/jwsdp1.0/docs/docs/tutorial/examples/gs/build/WEB-INF/lib not found.
    Total time: 3 seconds
    Not sure why?
    Any thing to do with classpath ,I am working on Solaris Sparc?
    Thanx
    Ash

    Hi amlan
    I am using j2sdk1_3_1 version(solaris).But there seems to be a problem cause it is linked to previous JDK version and I read symbolic links won't work for this JDK version,is it?
    I was able to run the gs sample.
    I am not sure whether we were suppose to modify build.xml.Nothing was mentioned in PDF nor online docs.
    I had to modify it for creating some directories
    But I was not able to compile java files using ant tool I had to compile it using our standard way :-)
    I cannot run JSP examples gives me respone /request dump when i try to acces it from index page (i.e tomcat :8080/index.html--JAXM Tag Library Sample) why is that so I have war files (e.g jaxmtags.war)?
    Thanks
    Ash

  • Cannot build the query or generate the report. WIS 30351

    I am trying to create a docuemtn using SDK. I have created a document and when I try to add dataprovider and update the document, I am facing the below error
    Cannot build the query or generate the report. WIS 30351
    http://help.sap.com/saphelpiis_sbo41sp5wi-sdk/frameset.htm?ec5645bc6fdb101497906a7cb0e91070.html
    Any help would be appreciated...

    Hi Pirabu,
    here's the required steps for what you described:
    1. Create a new report in folder with ID 12345:
         POST ../raylight/v1/documents
         request body:
            <document>
            <name>My New Doc</name>
            <folderId>12345</folderId>
            </document>
          response:
            <success>
            <message>The resource of type "Document" with identifier "54321" has been successfully created.</message>
            <id>54321</id>
            </success>
    2. use the new document ID when adding a data provider (ie universe ID is 5543)
          POST ../raylight/v1/documents/54321/dataproviders
          request body:
            <dataprovider>
            <name>Query 1</name>
            <dataSourceId>5543</dataSourceId>
            </dataprovider>
          response:
            <success>
            <message>The resource of type "Data provider" with identifier "DP0" has been successfully created.</message>
            <id>DP0</id>
            </success>
    If you are doing something different, please provide the steps you are using and the type of datasource you are adding (unv, unx, Bex query etc).
    Is the error when adding the data provider, or do you have an additional step updating the document?
    Also, what version of BI4 are you working with?
    Dan

  • Cannot build the query or generate the report - BI4.0 Dashboard on WebService Error

    Hello All,
         I am trying to create a Dashboard with WebService connections in SAP BI4.0 SP04. While running the dashboard I am receiving the error, Cannot build the query or generate the report. I have already set the refresh parameter to TRUE (bound to an excel cell and I have tried with 1 also). Back end WebI Reports of the BIWS connections are created from BEx queries through BICS connection. I have two prompts to run the Web Service and the report. Please share your thoughts regarding this.
    Thanks and Regards,
      Debajyoti Dan

    Hi All,
        I have found the issue. The problem is coming only when I am receiving prompts from BEx query and trying to use them through dashboard. I replaced these BEx prompts with the same in WebI report. Then the entire functionality started working correctly from dashboard.
    But, this is only a work around and can not be applied at all times. So I have raised a message for the same to SAP. I will update the thread based on what I receive from SAP Support.

  • Firefox does not opens. It shows an alert message -"Your Firefox profile cannot be loaded. It may be missing or inaccessible."

    Firefox window does not opens. It shows an alert message -"Your Firefox profile cannot be loaded. It may be missing or inaccessible." I have deleted the processes in task manager and restarted Mozilla.Even then it does not opens. Pls get me a solution.

    Make a new profile ('[[managing profiles]]'); if the old profile directory is still there, just copy-and-paste its contents into the new profile directory.

  • Successfully downloaded and installed Adobe Reader on my PC ... ( Windows 7 home premium (64 bit) OS).  Cannot print adobe documents... Error message indicates need to install plug-in for adobe reader for windows 7 home premium (64 bit) OS               

    Cannot print adobe documents ... Error message indicates a need to install plug-in for adobe reader.
    Please advise how/where to locate the required adobe reader plug-in...
    Thank you,
    Joe Curcio

    What is the full and exact message you are getting?
    If the PDF contains Rich Media, the Flash Player plugin may be required: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe

  • How do I install itunes on a windows 8 computer. I keep getting the message that the app cannot run on my computer.

    I cannot install itunes on my windows 8 computer. I get the message that the app cannot run on my computer.

    Hi mlheidt,
    If you are having trouble installing iTunes on your Windows 8 computer you may want to use the following article to help you get it up and running -
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Itunes will not update.  I get an message saying that it cannot verify signature and it will not install, itunes will not update.  I get an message saying that it cannot verify signature and it will not install

    iTunes will not update.  I get an error message saying that it cannot verify signature and it will be unable to install.

    Yeah me too try going through the apple website in (firefox) and download iTunes there. Currently that's what I'm doing.

  • I have recently bought an iPod touch 4th generation. The first day I could connect to the app store from my iPod and download what I wanted then today every time I try downloading something a message pops up saying " cannot connect to the iTunes store" y

    I just bought An iPod touch 4th generation yesterday, it was working fine I could
    Download appl from the store from my iPod without a problem . Today however every time I try downloading something from my iPod touch
    it. Doesn't download a message pops up saying " cannot connect to iTunes store" why? I am connected to the Internet and I can easily go on safari and google with. NO problem but everytime I go on the app store it gives me that message can you please help? My iPod isup to date and so is iTunes I so tried bar restarting my iPod and it worked for about 2 minutes the the message kept popping up Again please help me . Thank you

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    If your iPod is defective and not abused Apple will exchange it at no cost.
    Apple Retail Store - Genius Bar

  • I have been creating a document in numbers on my iPhone and synced to iCloud. Now I cannot open it, and when trying to download via browser I get an error message. How can I recover this document?

    Dear all,
    I have created a document on my iPhone, and stored it on iCloud. I have updated the document both on my iPhone and on my iPad. Now, I cannot open the document on my iPhone anymore, even a reset of the phone did not help. Via iPad I also cannot open the file, and when I try to download it to my PC via icloud.com I get an error message.I suspect that the file has become corrupt as I have updated it on the iPhone while I did not have network connectivity.
    I have two questions:
    1.) Is it possible to recover an earlier version of the file?
    2.) What can I do to prevent this from happening again in the future?
    3.) Does the iPhone sync changes to iCloud in the background or does the application need to be active?
    Thank you,
    Niftan

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

  • Cannot open Pages documents that I've worked on.  I open a new document, work on it, then save and close it.  When I try to open the document again, I get the following message: The document "[name]" could not be opened. The file isn't in the correct form

    I cannot open Pages documents that I have worked on and saved.  When I try to reopen Pages documents that I've saved, I get the following
    message:
    "The document “[name of document]” could not be opened. The file isn’t in the correct format.
    The file might be corrupted, truncated, or in an unexpected format."
    I have downloaded the latest update to iWork, but that doesn't help.
    I use Mac OSX 10.6.7
    I am using Pages '09 version 4.0.5 (852)
    If anyone can help, I would greatly appreciate it.
    Best regards,
    New York Mac User

    A few general trouble shooting tips that may apply here:
    1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
    1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
    2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
    Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
    Restart Pages and attempt to open one of the files.
    If all is well, Trash the plist file and empty the Trash.
    If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
    Regards,
    Barry

  • Message'there was an error opening this document.The file cannot be found'

    Using xp home and when I click to download the pdf file, it will give 3 options been 'open'/'save'/?. When I choose the 'open' option, it will give me the above message "there was an error opening this document.The file cannot be found"
    owever if I choose to "save" and I will be able to open the file and read it. In this pc its using Adobe Reader 8.1.2 with a patch. It was working fine prior to this sudden occurance of the error.
    Strangely I have another pc with the same specification, I was able to choose "open" and be able to read the file. Can anyone help to resolve the issue by using the "open' option instead of "save, then open". Greateful for your prompt response.

    Fyi, in addition to my earlier post, the other pc is using Adobe 8.1.1 and no other patch. I was trying to find 8.1.1 version but could not find a trust worthy site to load from. Do you think the error caused by using the 8.1.2 version? Thanks

  • Purchased books from iTune store and downloaded it.  Now, when I try to send it to my iPod nano, I get an error message saying the title cannot be found.  I cannot find a screen that offers an option to re-download.  What gives?

    I purchased a box set of books on iTunes, and downloaded them.  The title shows up in the "purchased" section, but when I try to send it to my iPod nano, I get an error message telling me it cannot be moved because it cannot be found.  I can't find a screen anywhere offering the option to re-download either.  I've paid for the books, but cannot access them!  Every time I upgrade iTunes, it gets more confusing and harder to use. 

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

Maybe you are looking for