SAPConnect problem

Hello all,
I have a problem in SAP Connect when I try to start the send process. My system dumps with the message "Call Function Receive Error" If I debug where the system dumps, I see that is in the call to function module
ABAPLIST_VERSION that is an RFC module. The exporting parameter is VERSION which has a value of 4. Does anybody have an idea how to resolve this issue?

Hi Enrique,
We too faced the similar issue when using sapconnect to send mails to INT Address.There was problem only for request which faced this problem.The problem was actually RCONN01 programs runs with job which send and receives the mails from/to SMTP Node.But during the sending process the Address of the user was not getting replicated in the Lotus notes which is the target.The issue was solved with the help of Lotus notes admin team.
Now the issue stands solved and no jobs are either getting failed or in wait status.
Regards
Ashly Titus
Satyam Computer Services Ltd.

Similar Messages

Problems in sent of external MAIL with the service SAPCONNECT

Hello all
We configured the service SAPCONNECT in my system quality for sending the mail and this is not problem, I executed tests with direction of mail internal and the are sent without any problem.
But the problems starts is when I sent the mail external and the message that displays is
Status received for this document:
     System Messages
Sent on:
     25.01.2011 11:29:07
Sent by:
     Marco Gerardo Ceballos V.
Status for Recipient xxxxxxx@aaaaa:
     No delivery to xxxxxx@aaaaa, as recipient unknown
The request of area of development is send the external mails.
I review the configuration in the transaction SCOT and I not see a problem.
ATTE
Gerardo Ceballos

Hi,
Please check the parameter icm/server_port_1, if this parameter is not set, add in TX RZ10 with the value:
PROT=SMTP,PORT=25
Restart the instance, then create a service user with the S_A.SCON profile.
In the SICF, open the SAPCONNECT service and check the configuration:
Host data: profile parameter = 0 // host configuration= :
Logon Data: Add the service user that you create
Handler List: CL_SMTP_EXT_SAPCONNECT
Save and active
In the SCOT add the domain in menu settings and add the mailhost and port in the SMTP node, Click the button SET in the internet option and add a * in field address area.
Go to SMICM --> Go to --> Services and check that the port that you add in the parameter icm/server_port_1 is active
Go to SBWP and send the message.
Good Luck
AG

Problems replacing email-subject with SAPConnect

Hi there,
I'm sending an order confirmation via SAPConnect as email.
The order confirmation attaches the email as a *.PDF file.
Now i'd like to replace the standard subject, that consists in the spool-number and some text from the message i use.
So, i went to SPRO, and put 'Your Order: &VBAK-VBELN&' in the mai title. That worked almost properly, because the spool number stayed.
So, i don't want this spool number output any longer.
The second point is, that i've tried to replace the standard output of the mail text. I didn't succeed at all.
So, my question. do you have any ideas to solve my problems?
Thanks for reply, greetings and happy eastern
Stefan

msg.setText("testeeeeeeeeeeeee");R
eplace that
bymsg.setContent("testeeeeeeeeeeeee",
"text/html");
Thanks DrClap, but that's not exactly the solution I'm looking for, cuz I would have to hard-code that header.
I have an Email class that I use as a wrapper for the javax.mail API, and I wanna be able to have a setHeader() method that works to enable the users to set the content-type of the text (or HTML) portion of the email, even when there are attachments. How can I achieve this?

SAPconnect Internet Mail Status Problem

I configured BI 7.0 SAPconnect for sending internet email. I receive the mail in outlook just fine. The problem is in the status field. All messages have status of sent. I would like to know what configuration is missing so I can receive status transmitted.
Thank You in advance

Martin,
You can go through the note 1033893 .
It would help you to resolve the issue

Problems with SapConnect

Hi,
I'm facing some problems with SAP Connect I'll apreciate if someone that have already had the same problem knows the reason.
I have a program that sends a mail with an attached PDF document by mail. The program is in development system and quality system. In both systems the mail is send, but in one system the attached PDF is OK, and in the other system the attached PDF cannot be opened. I've checked that when seeing the mail in SOST in the system where we cannot see the attached PDF, it is already with a corrupted format.
So, as the program is the same, I believe the reason of the attached is corrupted in only one system is caused by any administration task.
Does anyone have any idea of what may be causing this problem ?
Please note in SCOT the configuration is equal in both systems.
Thanks in advance,
Paulo Sousa

As you said it may issue with code.
We have several testing programs to check this.
I think your version is ECC
Check & try these
BCS_TEST05
BCS_EXAMPLE_5
BCS_EXAMPLE_6
a®

SAPConnect SMTP Problem

Hi Experts,
We are using Lotus Domino Server. Can I send mails from SAP using the SMTP or I have to use HTTO method to connect to the server?
Please share your experiences
Thanks

you can use SMTP to send mails. check this weblog for configuration and code for emailing.
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Regards
Raja

Line Alignment Problem while sending Fax from SAP Script

Moderator message: please do not post the same question in different forums
Hi Experts,
While sending fax the horizontal lines are not displaying till the end of the page.
But in the print preview the lines are displying till the end.
If this is printed using local printer the lines are printing fine but the problem is with the fax.
Please provide me a solution for this.
Regards,
Rajesh.
Edited by: Matt on Nov 25, 2008 2:51 PM

Puzzling.
I've seen where the printed output doesn't match the print preview but not a fax not matching a print.
Do you use SAPConnect or the older SAPComm method for faxing?
How do you produce the horizontal lines? BOX commands, ULINE, '-', etc.?

SAPConnect to Send Emails to external mail address

I am trying to send email from SAP to an external email address.
I've configured in SCOT the mail server and it respective port.
When I tried to send a test message, the message failed in the queue with the log:
"Cannot process message in SAP System - No ESMTP Plug-In Is Available for SAPconnect
Application Server Used by the Send Process:
S21TDI05
(Schedule Send Process on App.Server with Plug-In)
Upon checking the sap documentation, I encounter there's also a SMTP Service in "SMICM" as well. Inside there I can see that the SMTP setting is not activate and no values has been entered.
Are these 2 connected?
Advices are welcome.
Thanks,
Regards,
Wooi Chian.

This error message means that your SMTP plug-in is not active. Go to TR: SMICM -> GOTO -> SERVICES
Here you must see that the SMTP plug in is active.
This error usally due to bind error. The port wich had to be used is used by an other service.
Check if below mentioned parameters are set.
rdisp/start_icman = true
icm/server_port_0 = PROT=HTTP,PORT=1080
icm/server_port_1 = PROT=SMTP,PORT=25$$, TIMEOUT=60, PROCTIMEOUT=300
icm/server_port_2 = HTTPS,PORT=82$$, TIMEOUT=60, PROCTIMEOUT=300
and restart ICM . You should see SMTP service on SMICM transaction.
In my case problem was with the below parameters. PORT=HTTPS was assigned to server_port_1. I swapped the values of both the parameters icm/server_port_1 and icm/server_port_3. Only after that SMTP service started being visible under DISPLAY --> Services.
icm/server_port_0                           PROT=HTTP,PORT=80$$, TIMEOUT=60, PROCTIMEOUT=300
icm/server_port_1                           PROT=HTTPS,PORT=82$$, TIMEOUT=60, PROCTIMEOUT=300
icm/server_port_3                           PROT=SMTP,PORT=25$$, TIMEOUT=60, PROCTIMEOUT=300
Hope this helps solve the issue.
/Ravi

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
 at SAP.Connector.SAPConnection.Open()
 at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
 at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
 at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
 at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
 System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
 System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
 SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
 SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
 SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
 SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
 SoftwareKeyUI.search.LoadRegionDetails()
 SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
 System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
 System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
 System.Web.UI.Page.RaiseChangedEvents() +115
 System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

SAPConnect text email

Hi there,
I'm sending an order confirmation via SAPConnect as email.
The order confirmation attaches the email as a *.PDF file.
I've tried to replace the standard output of the mail text. I didn't succeed at all.
So i went to the customizing of the message and replaced the text for the email. The result was the SAP standard text.
So, my question. do you have any ideas to solve my problems?
Thanks for reply,
Stefan

hi sirkanth,
thanks for reply.
The email attaches an order confirmation as PDF. I can replace the email subjet with some text and variables from the print job, that is customized in spro, but not the text of the email.
Every documentation says, that's possible!
Do you have any idea?
Thanks, Stefan

Trouble with SAPconnect / sending email in ABAP-code

Hi,
with the code below I try to send an email from ABAP outside
to an mail-account in the internet.
I'll get no error/exceptions but the mail will be not send
to the internet-mail-account.
In Transaktion SCOT I checked the SAPconnect-Node "INT"-"SMTP".
There is a mailserver with the right IP und the right Port. So I don't understand
what could be the problem!?
Can anybody help me and say me why the code below doesn't works?
Best wishes!
* For API
data: maildata type sodocchgi1.
data: mailtxt type table of solisti1 with header line.
data: mailrec type table of somlrec90 with header line.
start-of-selection.
clear: maildata, mailtxt, mailrec.
refresh: mailtxt, mailrec.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test'.
maildata-obj_langu = sy-langu.
mailtxt-line = 'This is a test'.
append mailtxt.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
 call function 'SO_NEW_DOCUMENT_SEND_API1'
 exporting
 document_data = maildata
 document_type = 'RAW'
 put_in_outbox = 'X'
 tables
 object_header = mailtxt
 object_content = mailtxt
 receivers = mailrec
 exceptions
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 others = 8.
 if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 endif.
* Start the send process using the following statement
submit rsconn01 with mode = 'int' and return.
Message was edited by:
 sebastian eckes

SAP is a robust system, which gives many facilities in the form of Function Modules (FMs) for connecting to external systems or for use within the system. With a clever use of these FMs we can achieve a lot of things through ABAP code.
This article focuses on ways to send E-mails and SAP Mails using ABAP code.
Firstly SAP Mail
A SAP mail is a mail internal to the SAP system. It is a very good forum to exchange information with other users. Using a SAP mail in ABAP code facilitates exchange of automatic messages at various stages of the business process. It is easy to use and saves many hassles involved in using workflows for exchanging messages.
The ABAP code to send a sap mail is built around the FM SO_OBJECT_SEND which has the following pattern.
call function 'SO_OBJECT_SEND'
exporting
EXTERN_ADDRESS = ' '
FOLDER_ID = ' '
FORWARDER = ' '
OBJECT_FL_CHANGE = ' '
OBJECT_HD_CHANGE = ' '
OBJECT_ID = ' '
OBJECT_TYPE = ' '
OUTBOX_FLAG = ' '
OWNER = ' '
STORE_FLAG = ' '
DELETE_FLAG = ' '
SENDER = ' '
CHECK_ALREADY_SENT = ' '
importing
object_id_new =
sent_to_all =
tables
OBJCONT =
OBJHEAD =
OBJPARA =
OBJPARB =
receivers =
PACKING_LIST =
ATT_CONT =
ATT_HEAD =
NOTE_TEXT =
exceptions
active_user_not_exist = 1
communication_failure = 2
component_not_available = 3
folder_not_exist = 4
folder_no_authorization = 5
forwarder_not_exist = 6
note_not_exist = 7
object_not_exist = 8
object_not_sent = 9
object_no_authorization = 10
object_type_not_exist = 11
operation_no_authorization = 12
owner_not_exist = 13
parameter_error = 14
substitute_not_active = 15
substitute_not_defined = 16
system_failure = 17
too_much_receivers = 18
user_not_exist = 19
x_error = 20
others = 21.
In the next article we will understand the main parameters and table interfaces of the FM.
Import Parameters Name and Description Field name Field function
Object_hd_change (structure) Contains the process to be done when SAP mail is marked for execution.When the Execute Icon in the SAP mail is clicked the corresponding object is executed vmtyp D for dialog module F for function moduleR for reportT for transactionU for transaction with export
 Acnam Name of the object which is to be executed, like name of transaction/report
 Skips X to execute first screen in background
 Objsns Indicates sensitivity of the object. P for private objectF for functional objectO for confidential objectC for company confidential objectSensitivity level is restricted to O for documents in shared folders
 Objla Language of the document E for Englishsy-langu for system language
 Objnam Name of the document
 Objdes Short description (Title) of the document
 Objsrt Name of the sort field. This is used to group documents based on certain criteria
Object_type Type of document to be sent with mail RAW for raw text (default) DOC for word file XLS for excel fileAll classes can be used except for folders (FOL) and distribution lists (DLI)
Outbox_flag X to indicate that mail should also be stored in outbox of the user after sending (default )
Owner Sap login of the user responsible for transmission
Table Parameters Name and Description Field Name Field function
Objcont Table to hold the body of the mail Line Text lines up to 255 characters
Objhead Table to hold number of lines in the body of the mail, i.e size of the table in lines Line Text lines up to 255 characters
Objpara Table to hold the set/get parameters to be transferred to the processing element Name Name of the parameter. Only first three characters are used
 Option Not used
 Low Value of the parameter in name
 High Not used
Objparb Table to hold information for mails to which a certain processing type is assigned. For a report or transaction with transfer of values to global memory, the table has to contain the parameters with relevant values. The memory id is taken from the first row. For a FM or dialog module, data in table will be transferred as table parameter msgdial Name For report or transaction with transfer of values to global memory, the field for first row should hold the name of the memory id used for export and the other rows should hold the parameter names. For FM or dialog module this field should hold the values as per the usage of the module
 Value For report or transaction with transfer of values to global memory, the field for first row should remain empty and the other rows should hold values of the parameters. For FM or dialog module this field should hold the values as per the usage of the module
Receivers Table to hold recipient details Recnam SAP login of the recipient. Append all the recipients to this table
 Sndcp X for sending mail as a copy
 Sndex X for sending as express document. This will prompt a logged on recipient saying that he or she has received an express mail
 Recesc B for SAP user E for external email addressU for unix address
Export Parameters Name and Description Field name Field function
Object_id_new Contains object id of document created during send process
Sent_to_all X indicates that document was sent to all recipients. Flag is not activated if sending fails in one or more cases
Main Exceptions Name and Description Description
Too_much_receivers Number of recipients is greater than number for which sender is authorised to send
Object_not_sent Document was not delivered to any of the recipients
Object_not_exist Document class specified does not exist or cannot be sent
Object_no_authorisation Document could not be sent as one of the required authorisations does not exist
Parameter_error Invalid combination of parameter values transferred to FM
X_error Internal error occurred
Once all the parameters and table interfaces are properly filled, call the function module to send the SAP mail to the recipient inbox.
Care should be taken to report the status of execution of the function module to the user using one of the exceptions defined (refer function module pattern above)
Though SAP mail is a very robust method of interacting with users within SAP system, it is always good to receive email in Microsoft inbox. This also works like an additional notification to users in case they do not check SAP mail regularly. The next article covers sending E-mails using ABAP.
Sending Email to a non-SAP system:
Though SAP mail is a very robust method of interacting with users within SAP system, it is always good to receive email in Microsoft inbox. This also works like an additional notification to users in case they do not check SAP mail regularly.
Sending an email to the Microsoft Inbox is a way of interacting with a non SAP system through ABAP code and hence is very interesting. A fair knowledge of UNIX shell scripting is assumed here.
The ABAP code to send an email to Microsoft inbox revolves around following UNIX script
Echo "From:" "<"$1">" > <unix file path name>
Echo "To:" "<"$2">" >> <unix file path name>
Echo "Subject:" "<"$3">" >> <unix file path name>
Cat $4 >> <unix file path name>
Uuencode $5 $6 >> <unix file path name>
Cat <unix file path name> | /usr/sbin/sendmail f $fraddr $toaddr
(Note : the commands in the above script can be case sensitive. Check the actual case on the unix installation in question)
Let us understand the various parts of the above script.
$1 = Sender email address
$2 = Recipient email address
$3 = Subject of the email
$4 = Path of unix server file having email body
Form email body as an internal table in ABAP program, download it to a unix server file
$5 = Path of unix server file to be sent as email attachment
$6 = Name to be given to the attachment (like test1.doc, test1.xls). The corresponding Microsoft icon
will be shown in the email for the type of file attached ( Word document, excel document etc)
The script builds a temporary file and pipes the file to the sendmail command to achieve the mission.
This script can be invoked from SAP to send the mail to the intended recipient. Store this small script on the unix server. (Assume script name is sndmail )
To do this we should define a link in the SAP system between a customized command and this unix script.
The FM to define a customized command in SAP system has the following pattern.
call function 'SXPG_CALL_SYSTEM'
exporting
commandname =
PARAMETERS = ' '
importing
status =
tables
exec_protocol =
exceptions
no_permission = 1
command_not_found = 2
parameters_too_long = 3
security_risk = 4
wrong_check_call_interface = 5
program_start_error = 6
program_termination_error = 7
x_error = 8
parameter_expected = 9
too_many_parameters = 10
illegal_command = 11
others = 12.
In the next article we will understand the main parameters and table interfaces of the FM.
Import Parameters Name and Description Field name Field function
Commandname Name of unix shell script or command to be executed by SAP Name of unix shell script to be invoked
Parameters The parameters to be sent to unix shell script ($1, $2 etc). Send parameters as a concatenated string separated by space and length not exceeding 128 characters For eg in UNIX environment the above shell script would be executed as Sndmail [email protected] [email protected] Trial /home/test.doc testmail.We will be simulating this command using the FM from SAP system
Table Parameters Name and Description Field Name Field function
Exec_protocol (structure) Table to get messages from unix server after shell script is executed Length Length of the message from external program i.e unix
 Message Log message from external program i.e unix
Export Parameters Name and Description Field name Field function
Status Contains the status of execution of external program Scheduling status of external program i.e unix
Once the above FM is invoked with the necessary parameters the unix program sendmail will send a mail to the inbox of the recipient in Microsoft.
The restriction on the parameter string length of 128 characters can be removed to make way for very long email addresses and subjects. Build the parameters into an internal table and download it as a file on the unix server. Instead of passing each parameter individually, pass the unix server path of this file as the parameter to the unix shell script (sndmail mentioned above). Modify the shell script to read every line of this parameter file as variables to be used in the shell script.
In the next article we will see an example of the ABAP code you can use to send SAP Mails.
REPORT ZTSAPMAIL.
DATA: X_OBJECT_TYPE LIKE SOOD-OBJTP.
DATA: BEGIN OF X_OBJECT_HD_CHANGE.
INCLUDE STRUCTURE SOOD1.
DATA: END OF X_OBJECT_HD_CHANGE.
DATA: BEGIN OF X_OBJCONT OCCURS 10.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJCONT.
DATA: BEGIN OF X_OBJHEAD OCCURS 0.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJHEAD.
DATA: BEGIN OF RAW_HEAD.
INCLUDE STRUCTURE SORH.
DATA: END OF RAW_HEAD.
DATA: BEGIN OF X_RECEIVERS OCCURS 0.
INCLUDE STRUCTURE SOOS1.
DATA: END OF X_RECEIVERS.
PARAMETERS: RECEIVER LIKE X_RECEIVERS-RECNAM. " Name
*BUILD MESSAGE HEADER
MOVE 'Sort field goes here' TO X_OBJECT_HD_CHANGE-OBJSRT. " Sort field
MOVE 'Name of the object goes here' TO X_OBJECT_HD_CHANGE-OBJNAM. " Name
MOVE 'Document title goes here' TO X_OBJECT_HD_CHANGE-OBJDES. " Title
MOVE 'F' TO X_OBJECT_HD_CHANGE-OBJSNS. " Functional OBJECT
MOVE 'E' TO X_OBJECT_HD_CHANGE-OBJLA. " Language
Object type of the new document
MOVE 'RAW' TO X_OBJECT_TYPE.
CLEAR X_OBJCONT.
MOVE 'Contents of mail' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
CLEAR X_OBJCONT-LINE. APPEND X_OBJCONT.
MOVE 'More contents' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
MOVE 'Still more contents'
to x_objcont-line.
APPEND X_OBJCONT.
MOVE ' ' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
Specific header (Dependent on the object type, here RAW)
REFRESH X_OBJHEAD.
DESCRIBE TABLE X_OBJCONT LINES RAW_HEAD-RAWSIZ.
MOVE RAW_HEAD TO X_OBJHEAD.
APPEND X_OBJHEAD.
*RECEIVERS table
CLEAR X_RECEIVERS.
REFRESH X_RECEIVERS.
MOVE RECEIVER TO X_RECEIVERS-RECNAM. " Name
MOVE 'B' TO X_RECEIVERS-RECESC. " Receiver type
MOVE 'X' TO X_RECEIVERS-SNDCP. " Send as a copy
MOVE 'X' TO X_RECEIVERS-SNDEX. " EXPRESS DOCUMENT
APPEND X_RECEIVERS.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = 'OUTBOX'
forwarder = x_forwarder
object_fl_change = x_object_fl_change
OBJECT_HD_CHANGE = X_OBJECT_HD_CHANGE
object_id = x_object_id
OBJECT_TYPE = X_OBJECT_TYPE
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
store_flag = x_store_flag
importing
object_id_new = x_object_id_new
sent_to_all = x_sent_to_all "May need to use
TABLES
OBJCONT = X_OBJCONT
OBJHEAD = X_OBJHEAD
objpara = x_objpara
objparb = x_objparb
RECEIVERS = X_RECEIVERS.
REPORT ZTUNIXMAIL.
DATA : TO_ADDRESS LIKE SY_LISEL,
FROM_ADDRESS LIKE SY-LISEL,
SUBJECT LIKE SY-LISEL,
ATTACHMENT_NAME LIKE SY_LISEL,
DATA_FILE_PATH LIKE SXPGCOLIST-PARAMETERS,
BODY_FILE_PATH LIKE SXPGCOLIST-PARAMETERS.
DATA : BEGIN OF INT_EMAIL_ATTACH OCCURS 0,
TXTLINE CHAR(255),
END OF INT_EMAIL_ATTACH.
DATA : BEGIN OF INT_EMAIL_BODY OCCURS 0,
TXTLINE CHAR(255),
END OF INT_EMAIL_BODY.
CLEAR : INT_EXEC_PROTOCOL,INT_EMAIL_ATTACH,INT_EMAIL_BODY.
REFRESH : INT_EXEC_PROTOCOL,INT_EMAIL_ATTACH,INT_EMAIL_BODY.
INT_EMAIL_ATTACH-TXTLINE = 'Put all attachment text in this table'.
APPEND INT_EMAIL_ATTACH. CLEAR INT_EMAIL_ATTACH.
INT_EMAIL_BODY-TXTLINE = 'Put all attachment text in this table'.
APPEND INT_EMAIL_BODY. CLEAR INT_EMAIL_BODY.
CONCATENATE TO_ADDRESS
FROM_ADDRESS
SUBJECT
BODY_FILE_PATH
DATA_FILE_PATH
ATTACHMENT_NAME
INTO V_PARAMETERS.
IF NOT INT_EMAIL_ATTACH[] IS INITIAL.
OPEN DATASET DATA_FILE_PATH FOR OUTPUT IN TEXT MODE.
LOOP AT INT_EMAIL_ATTACH.
TRANSFER INT_EMAIL_ATTACH-TXTLINE TO DATA_FILE_PATH.
ENDLOOP.
CLOSE DATASET DATA_FILE_PATH.
ENDIF.
IF NOT INT_EMAIL_BODY[] IS INITIAL.
OPEN DATASET BODY_FILE_PATH FOR OUTPUT IN TEXT MODE.
LOOP AT INT_EMAIL_BODY.
TRANSFER INT_EMAIL_BODY-TXTLINE TO BODY_FILE_PATH.
ENDLOOP.
CLOSE DATASET BODY_FILE_PATH.
ENDIF.
CALL FUNCTION 'SXPG_CALL_SYSTEM'
EXPORTING
COMMANDNAME = 'Z_EMAIL' - Command calling unix script
PARAMETERS = V_PARAMETERS
importing
status = ''
TABLES
EXEC_PROTOCOL = INT_EXEC_PROTOCOL
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
regards,
srinivas
*Reward points for useful answers*

Problem passing a table parameter in rfc call using the function control

I try to pass a Table as parameter to a Function Module using the SAP.Functions library (part of SAP frontend controls) from a Visual Basic (VBA) program.
The function module has been verified to work when invoked from SAP FrontEnd Function Builder.
The SAP RFC Control is created with
Set sapFunctions=CreateObject("SAP.Functions")
Following code snippet shows how I attempt to set exports and add a table row before calling the function module:
sapFunctions.Connection = sapConnection
Set sapMaterialUpd = sapFunctions.Add("Z_SD_BAPI_SALES_DATA_UPD")
With sapMaterialUpd
'set exports
 .Exports("PA_GLPUPDLEVEL") = "S"
 .Exports("PA_VKORG") = "FI14"
'append table row
 .Tables("IT_SALES_DATA_UPD").AppendRow
 .Tables("IT_SALES_DATA_UPD")(1, "VKORG") = "FI14"
 .Tables("IT_SALES_DATA_UPD")(1, "MATNR") = "W_3100"
 .Tables("IT_SALES_DATA_UPD")(1, "DATBI") = "99991231"
 .Tables("IT_SALES_DATA_UPD")(1, "DATAB") = "20041231"
 .Tables("IT_SALES_DATA_UPD")(1, "KBETR") = "2222"
 .Tables("IT_SALES_DATA_UPD")(1, "KONWA") = "EUR"
End With
'call the function module
If sapMaterialUpd.Call() = True Then
 'do something with the return tables here...Else
 Debug.Print sapMaterialUpd.Exception
End If
The Call() returns FALSE and the exception is "SYSTEM_FAILURE". The connection also resets.
The local logfile that the control generates shows that an exception occurs at the point of the call:
10.02.2005 17:54:20.766 Packing Parameters for Z_SD_BAPI_SALES_DATA_UPD
Packing Parameter PA_GLPUPDLEVEL.
Packing Parameter PA_VKORG.
Packing Table 0.
Packing Table 1.
10.02.2005 17:54:20.766 *** Calling RFC Function 'Z_SD_BAPI_SALES_DATA_UPD'
10.02.2005 17:54:20.986 RFC CALL status = RFC_SYS_EXCEPTION
10.02.2005 17:54:20.986 RFC Error: RFC_IO27
-Status:CODE=CM_DEALLOCATED_NORMAL STATUS=CM_NO_STATUS_RECEIVED DATA=CM_COMPLETE_DATA_RECEIVED ID=69415076
-Message:connection closed
-Internal Status:IO HANDLE=23 DRV=EXT LINE=1420 CODE=27 : GET ID=ffff LINE=861 CODE=7
10.02.2005 17:54:20.986 Function call finished.
Seen next code snippet. If the Table object is not touched, the function call goes through without any problems:
sapFunctions.Connection = sapConnection
Set sapMaterialUpd = sapFunctions.Add("Z_SD_BAPI_SALES_DATA_UPD")
With sapMaterialUpd
'set exports
 .Exports("PA_GLPUPDLEVEL") = "S"
 .Exports("PA_VKORG") = "FI14"
 'do not append a table row, for testing only ;-)
End With
'call the function module
If sapMaterialUpd.Call() = True Then
 'do something with the return tables here...
Else
 Debug.Print sapMaterialUpd.Exception
End If
This code works perfectly when calling the function. It returns TRUE and behaves normally. The function module returns descriptive response text in a table telling that the table was empty, according to the BAPI implementation.
So is there something special needed here after appending the table row and before making the Call to properly attach the table as a parameter for the function module?
Can this be a bug in the SAP RFC Control? The version of the wdtfuncs.ocx is 6206.6.45.54.
Any hints are welcome!

hi All partner,
who solved this problem , I meet it too and
can't clear it.
SAPfunc := sapfunctions1.Add('z_get_sfcs_dn_mo');
SAPitab := sapfunc.tables.item ('I_DNMO');
SAPitab.appendrow; SAPitab.value(1,'MANDT') := '220';
SAPitab.Value(1,'VBELN') := '2150000001';
SAPitab.Value(1,'POSNR') := '50';
SAPitab.value(1,'MATNR') := '19-99999-00';
SAPitab.value(1,'AUFNR') := '921241512001';
SAPitab.value(1,'DEDAT') := '2005/09/09';
SAPitab.value(1,'LFIMG') := '100';
IF SAPfunc.call = true then
begin
end
else
 begin
 showmessage('call fail!!') ;
 end;
end;
RFC source code as below
FUNCTION z_get_sfcs_dn_mo.
""Local interface:
*" TABLES
*" I_DNMO STRUCTURE ZDN_MO
data: wa type zdn_mo.
LOOP AT i_dnmo.
 wa-mandt = i_dnmo-mandt.
 wa-vbeln = i_dnmo-vbeln.
 wa-posnr = i_dnmo-posnr.
 wa-matnr = i_dnmo-matnr.
 wa-aufnr = i_dnmo-aufnr.
 wa-dedat = i_dnmo-dedat.
 wa-lfimg = i_dnmo-lfimg.
 modify zdn_mo from wa.
 insert into zdn_mo values wa. --dump at here
 commit work.
ENDLOOP.
T/C: ST22 error message say at
insert into zdn_mo values wa. ---dump at here
the sapfunc.call returns fail.
Message was edited by: jorry wang

IISproxy problem: Edit locally - check in

Hi all EP freaks,
I have with succes implemented th IISproxy filter so I now can access the portal through the IIS(version 5.0).
I have som excel files that are being edited with the "Edit locally" function. This works fine (excel opens up and I can edit the data locally) but when I afterworth will "Check In" the modified documents the system "hangs". On the client the normal "copy file windows window" showing "Copyied 140% and still not finished... This wil go on for ever so I click cancel and the modified excelfile is'nt updated through the portal.
THIS WORK FINE BEFORE I IMPLEMENTED THE IISproxy module...
In the IISproxy log file i have:
18:02:47   4400 Proxy    | POST http://server01.domain.local:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fTEST!2fManager!2fTESTMAPPE!2fDocuments!2fcom.sap.km.AdminExplorer_2/dok | HTTP/1.1 200 OK | 0.000 | 0.078
18:02:48   4400 Proxy    | GET http://server01.domain.local:50100/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/docservice/docservice.cab | HTTP/1.1 304 Not Modified | 0.000 | 0.046
18:02:49   4400 SAP    E NiRawOutStream::RawWrite(): NiRawWrite( NI-1 ) failed: -6 (NIECONN_BROKEN)
18:02:49   4400 Proxy E ProxyImpl::ProcessBody(): IOException: NiRawOutStream::RawWrite(): NiRawWrite( NI-1 ) failed: -6 (NIECONN_BROKEN)
     at SapConnection.cpp:331
18:02:49   4400 Proxy E Failed to send request body.
Please help me
Best regards
Lars Bregnedal

Please try also the following settings:
use-continue=false
keep-alive=false
close-socket=true
These were reported by SAP support as the recommended settings for customer having problems with Local Editing and IIS Proxy.
ActiveX is for Windows only, Java Applet can be used also on other platforms. To use the Java Applet uncheck ActiveX, select "Java Applet" and set the version to "1.3" even if running 1.4 (again a recommendation from SAP support).
If it still doesn't work, you should check that your Java Plug-In actually works. Here is a link I always use to check that the Java Plug-In works:
http://www.java.com/en/download/help/testvm.jsp

Capturing line items in the routine-mail order sending problem

Hi
I am sending Sales Order Output to the Email.
I have configured the output type Using Option 'External Send' Option.
But the Problem is Whenever there are blocks for Sales Order Email Should not be send.
1.    When there is a block in Sales Order Header, then no email should be sent.
2.    Similary when there is a block Sales Order Item , then no email should be sent.
There is some standard routine attached to Outputtype Procedures .
First Condition we can met using routine, in the routine if the block is there , then no output will
be triggered.
But in the same routine we couldn't able to capture item level data to validate the second condition.
If anybody is having the idea to validate second condition, Please help me.
Thanks&Regards
(YUGANDHAR.P)

hi check this simple example which is sending the sales order email........
TABLES: ekko.
PARAMETERS: p_email   TYPE somlreci1-receiver .
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
data: ld_store(50) type c. "Leading zeros
CONSTANTS: con_cret(5) TYPE c VALUE '0D', "OK for non Unicode
             con_tab(5) TYPE c VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
   con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR' INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
*Modification to retain leading zeros
inserts code for excell REPLACE command into ld_store
=REPLACE("00100",1,5,"00100")
    concatenate '=REPLACE("' wa_charekpo-ebelp '",1,5,"'
                             wa_charekpo-ebelp '")' into ld_store .
concatenate ld_store into .xls file instead of actual value(ebelp)
    CONCATENATE wa_charekpo-ebeln ld_store wa_charekpo-aedat wa_charekpo-matnr INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.
regards,
venkat

SAPConnect problem

Similar Messages

Maybe you are looking for