SAPConsole / Websapconsole: Logon to message server

Dear experts,
is there a way to logon to a logon group? Our production system consists out of several application servers and I can't manage it that Sapconsole is logging on to a group. It works fine for a single server, though.
Thanks!

Hello Gunter,
should work when connecting with "Saplogon Selection" and setting the correct System Description. (SAPConsole Administrator / Connection Tab)
Please make sure that your login works with the Sap Logon for SapGui first. If that works then it should work via SapConsole/WebSapConsole using the (exact) System description e.g. "R33 [PUBLIC]" (eventually by setting it manual in case the dropdown doesn't display the possibilities from saplogon.ini)
Regards,
Fekke

Similar Messages

LOGON NOT POSSIBLE. ERROR IN LICENSE CHECK -- NO HWid from message Server

We could logon to the EC6 system. I
Stopped the EC6 system and started
it . It started with License Key
Error. the License key was available
and was shown in SLICENSE transaction
but it was giving LOGON NOT POSSIBLE.
ERROR IN LICENSE CHECK.
SO I deleted the TEMP and the Original
License via command SAPLICENSE -DELETE
and then REINSTALLED THE LICENSE with
the details
SAP System: EC6
Inst. Number: 0020174764
Hardware Key: Z1686313186
System Number: 310590866
Expires On: 31.12.9999
Key:
RZKGNA79K9U4F7D7SGGOWU1V
The License was successfully installed
but Still the samer error .LOGON NOT
POSSIBLE. ERROR IN LICENSE CHECK
Somehow it is not getting the hardware
key.But when I run the command
saplince -get then it returns
saplicense: HARDWARE KEY = Z1686313186
DEV_W0 log says that
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 509]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2268]
Please Help

Sergo
My sapmsEC6 has been assigned to 3601 port as my instanace number is 01 . So that is correct. the Thread which has given didn't help . Thanks for you inputs.
Yogesh

Logon balancing error 88: Cannot connect to message server(rc=9)

HI.
I AM USING R3 ECC 6.0
PLZ HAVE A LOOK ON BELOW IMAGES.
IN VM WEAR I HAVE INSTALLED THE ECC
THROUGH THE WINDOWS 7 I AM LOGIN ECC 6.0
EVERY TIME WORKING
BUT RECENTLY I BOO MY PC WINDOWS 7
BUT IF I TRY TO RUN THE SAP LOGON
ABOVE ERROR MESSAGE IS COMING.
I SEARCHED IN NET.
SOME BODY SUGGESTED THAT I NEED ADD ONE LINE AT SERVICES. FILE...(PLZ HAVE A LOOK ON 2 IMAGE)
IS IT CORRECT TO ADD THE LINE..
CAN I ADD THIS LINE
SAPMS<SID> 3600/TCP
ABOVE ONE IS CORRECT OR NOT ...
WHERE CAN I ADD IN VM WEAR SYSTEM OR IN WINDOWS 7 SYSTEM.
AND ALSO I AM HAVE ONE MORE DOUBT.
PLZ HAVE A LOOK ON 2 IMAGE..
I AM HAVING 2 SERVICES. FILES..
I NEED YOUR VALUBALE SUGGESTIONS..

Hi,
Please change the <SID> of SAPMS<SID> to the real SID of the target system.
For exmple, if the SID is ABC, then "SAPMSABC 3600/TCP"
And about the port, actually the port should be 36<nn>.
So please find the instance number of your message server.
For example if the instance number is 00, then "SAPMSABC 3600/TCP"
if the instance number is 10, then "SAPMSABC 3610/TCP"
Hope this helps.
Best regards,
Shuai

Logon balancing error:cannot connect to message server (rc=9)

Hi Gurus,
I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system.
I am now able to see the servers in the logon pad but not able to login .
When i try clicking the logon i am getting the below error message "
"Logon balancing error:cannot connect to message server (rc=9)"
Then further expanding the message i am getting the below message
" Error: Server '?' unknown
Tue Mar 02 11:51:05 2010
Release 710
Component NI (Network Interface), Version 39 rc =-3 , Detail NiErrSet. "
Can you please help me out in accessing the servers.
Regards
Vikram

Check OSS Note : 882741
Summary
Symptom
Some users cannot longer connect SAP GUI to any SAP systems e.g. via SAP Logon, SAPShortcut etc. although they have not made any update to either SAP GUI or SAP system. The attempt to connect to the SAP system ends with error messages like this: "Logon balancing error: could not connect to message server (rc=9)", "service sapmsXXX unknown" or "service sapdp## unknown".
The detailed error information is as follows:
    Error: service 'sap...' unknown
    Component NI (network interface), ...
    rc = -3, module ninti.c, line 463
    Detail NiPGetServByName: service 'sap...' not found
    System Call getservbyname
Other terms
service sapmsXXX unknown,logon balancing,service sapdp## not found error,etc/services,drivers\etc\services,getservbyname, sapdpxx
MSN Messenger 7.5,Connection Troubleshooter
Reason and Prerequisites
The reason for this malfunction is, that the datatype of the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
was changed from REG_EXPAND_SZ to REG_SZ.
The following programs are currently known to cause this registry change:
Starting MSN Messenger 7.5 "Connection Troubleshooter" (Build 7.5.0299).
Installation of MSN Messenger 7.0 or MSN Messenger 7.5 with the option automatic scanning and configuration of ports.
This modification prevents the expansion of environment variables in the value of the parameter. Therefore,
      %SystemRoot%\system32\drivers\etc
is not translated to
   c:\windows\system32\drivers\etc
and the services database is not found by the API function getservbyname().
If you have checked the datatype of registry value DatabasePath and it is REG_EXPAND_SZ, apply SAP Note 52959 to check the appropriate settings in the services file.
Solution
Start the registry editor and rename the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
Create an Expandable-String Value (REG_EXPAND_SZ) with the same name and value.
If more PCs are affected, you can export the correct value to a .reg file and import the .reg to other PCs.
If you have the same problem although you have not installed Microsoft MSN Messenger 7.5, create a customer message, collect the following information and attach it to the message according to note 541726 or upload it to sapservX (see note 40024):
Scan your workstations for spyware and viruses with up-to-date virus definitions. If you already did that what was the result ?
What software has been installed recently ? (client software, Firewall)
Create a registry export of the following key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstallon the affected and the unaffected PC respectively and attach the two .reg files to the customer message.
Are the users on the affected workstations logged on with administrative credentials (local administrator ) ?
Create an MPS Report Networking and Setup Perf of an affected workstation so that we can check if they use an software in common.
You can download the Networking MPS Reporting Tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network.exe
You can find a short description about the features of the tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network_Readme.txt
The Setup Perf MPS Reporting Tool is located at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_SETUPPerf.EXE
Run this report too on identically configured workstations, which are not affected.
If you have already changed back the DatabasePath parameter and if after a while the value was switched back to REG_SZ perform the following steps to help us to identify the reason for this problem:
Switch the datatype back to REG_EXPAND_SZ
Download Regmon from http://www.sysinternals.com on the affected machines
Enable auditing on the affected clients
Modify the settings of the eventlog so that no important entry is deleted!
Open Regedit and highlight HKLM\System\CCS\Services\TCPIP\Parameters
Right-click on "Parameters" and choos "Permissions" and click "Advanced".
Choose "Auditing" and "Add".
Add "Everyone" and select "this key only" under "Apply onto".
Check the boxes "Set Value" and "Delete" and click "OK".
Apply these settings
Start Regmon and apply the correct filter settings:
Press the "magnifying glass" button to stop the monitoring.
Press the rubber button to delete all logged entries.
Go to "Options Filter/Highlight".
Copy the following value to the include field: tcpip\parameters\databasepath and click "Apply".
Start Regmon by pressing the magnifying glass button
Verify that logging starts when you double-click the TCPIP Key in regedit!
If the datatype will be changed again, provide us the output of the monitoring tools.
Solution provided by Microsoft
This issue is said to be fixed as of build 7.5.0311 of MSN messenger.

Check for the logon message server

Hello All,
in order to ensure the advantages of the load balancing we want to check if the user has used the message server for the logon to the SAP system. There is the function module EXIT_SAPLSUSF_001 that is called after each logon and we could implement this functionality there.
The problem is that we can check only the current host (sy-host) of the user session, but we can not distinguish whether the user used the application server directly or was sent to this server within load balancing functionality.
Do you have an idea / experiences for this issue?
Any suggestions would be appreciated,
Best Regards,
Kirill

Hi,
You can develop your own check and use user-exit in CO-PA (COPA0005 enhancement).
Regards,
Eli

Create a logon group as Message server

Hi,
please explain me with steps for how to create a logon group as Message server usage for few jco destination is must.

Hello Kishore ,
To create or assign Logon group for Jco connection use Tcode SMLG :
Create a group name e.g PUBLIC and assign the instance profile of central instance and Dialog instance.
You can create Logon group or assign existing logon group into Jco destination.
Regards ,
Santosh Karadkar

PI 7.11: Cannot connect to server using message server:...

Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
Markus

Hi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian

Unable to change password while first logon on windows server 2008 R2 SP1 system

Hi Team,
Ad team has created new account for me with change password on first logon setting
When I logged in on Windows Server 2008 r2 SP1 system with my new credentials I get a error message stating that
"You must change your password before logging on the first time. For assistance, conatct your system administrator or technical support"
Concern:
I do not get password change screen on first logon on the server. How should I change my password on first logon?

Hi,
I got resolution for above issue
Run ==> type "tsconfig.msc" ==> double click "RDP-TCP" ==> change security layer to
RDP Security layer ==> Apply ==> OK

Logon Error Message ( HTTP to RFC )

Hi all,
While I am practicing HTTP to RFC Scenario..
When I SEND data from test client ..It is asking for SAP Web Application Server (SID)
User ID and Password..
When I am giving my XI ID and Password ( and also i tried BASIS ID ,J2ee_admin, Even i assinged ROLE SAP_XI_APPL_SERV_USER ) it is giving Error like this
-->Logon Error Message
-->Error Code: ICF-LE-http-c:001-l:E-T:1-C:3-U:35-P:35-L:3
-->HTTP 401 - Unauthorized Your SAP Internet Communication Framework Team
-->Call of URL http://serverhost:8000/sap/xi/adapter_plain terminated due to error in logon data
-->Logon performed in system OPD. </li><li> Logon performed for client 001, user xiappluser, and language EN.
-->HTTP 407 Proxy Authentication Required - The ISA Server requires authorization to fulfill the request. -->Access to the Web Proxy service is denied. (12209)<BR>Internet Security and Acceleration Server
-->The gateway could not retrieve the requested page
These errors I am getting..
please guide me to complete this scenario.
Thanks in advance,
Ramesh.
( I am unable to search SDN ,due to some upgradation is going on )

Hi Sreeramoju,
1. HTTP-401 :
        If the Integration Server is accessed by means of an HTTP proxy server,the credentials must match those that you made in transaction SICF in the Integration Engine. If you do not specify a user and password combination, or the combination is invalid, the system will terminate each attempt to access the Integration Engine with the message Transport Exception: http-Error 401 Unauthorized.
The user must have the authorizations of group SAP_XI_APPL_SERV_USER on the Integration Server.
If you want to use a different client or language to the default setting in the Integration Engine when logging on, you can also set the following parameters:
○     XI.Client=<client-no>
○     XI.Language=<language-id>
2.HTTP 407: Proxy Authentication Required" in SAP XI J2EE AE: check the SAP note: 992690
    Make sure that you have specified the proper host and port values, in the text box that appears when you check the configure proxy check box(in receiver adapter).
Looks like the webservice requires a proxy authentication.
Select the check box "configure proxy user authentication"(in receiver adapter) and provide the correct username and password.
*Pls: Reward points if helpful*
Regards,
Jyoti

Logon Error Message when opening application.

All dear Gurus,
In the Portfolios-> item-> relationships-> object Type(DMS), we have added an object and it is appearing. But when we click on the open of the application , I am getting Logon error message.
What I should to to solve it.
Please see the attachments
Regards,
Namsheed.

Hi Ravi,
we got the system alias name from Gateway->OData Channel->Configuration->Connection Settings->SAP Netweaver Gateway to SAP System->Manage System Aliases.
And in Define webserver alias, we have maintained like this.
In define Object link type, in DMS
And as you told, in service for object type, we have maintained the web server.
I have already activated the service : SICF path - /default_host/sap/bc/gui/sap/its/webgui
After all this configuration I checked in NWBC, but still I am getting error like this.
Correct me where I am wrong.
Regards,
Namsheed.

After installation NetWeaver 7.01 ABAP Trial Version "Logon Error Message"

Hello all,
After a sucefull installation of NetWeaver 7.01 ABAP Trial Version and when i tried to acess sap through web browser i get the following error:
Logon error message
Service cannot be reached
What has happened?
URL http://localhost:8000/sap/bc/gui/sap/its/webgui call was terminated because the corresponding service is not available.
Note
The termination occurred in system NSP with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:netweaver_NSP_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
With Sap Logon i can login correctly. Does anyone have an ideia how can i access through a web browser?
Thanks
Edited by: Pedro Bessa on Jul 7, 2009 12:17 AM

thanks,
thanks!
I have done that:
and activated: 'sap/bc/gui/sap/its/webgui right click on each relevant service and activate it'
is it the only service to activate, because I have errors on the url : http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-system-login-basic_auth=X&sap-client=000&sap-language=EN
My Error:
Note
The following error text was processed in the system NSP : Template interpretation cancelled, syntax error.
The error occurred on the application server shai1_NSP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSMTR_NAVIGATION

Use message server as load balancing instead of web dispacher for XI in HA

Hi all!
    We are currently upgrading a cluster XI installation from 3.0 to 7.0.
    The idea is:
          Now:    1 node (central instance)
                     1 node (database)
          Future: 1 node (central instance)
                     1 node (database + application instance)
     So we need some king of load balancing between the two instances.
     We already know web dispatcher and all configuration required. However we
were trying not to use it but use the abap/java message server who can also do
the redirect.
     However, once the Exchange Profile has been updated, it does not work.
     If we change "com.sap.aii.connect.repository.httpport" to "8101". Cache refresh stop working with a "Authorization Error". This is really strange because if I try the very same URL in the explorer and I enter the logon data, I have no problem.
     Do you have any experience with this? I mean, is it possible to avoid installing web dispatcher?
     Thanks and kind regards,
           Encinas.

Hi David,
the message server does only a redirect and some XI applications (JAVA and ABAP side) cannot handle the redirect URL.
Therefore in the XI environment you have to use a "real" dispatcher (keeping the session and forwarding the session, instead of redirect) - for example you can use the SAP WebDispatcher here.
Best regards,
Silvia

Solution Manger Sap MMC, disp+work process says message server unreachable

Hi Folks, I have installed Solution Manager on Windows 2003, 3GB ram, 300 Gigs, installation completed success fully, after installation i worked on post-installation, like client creation, setting up solution monitoring, logon.._sap* to 0. After I have restarted the solman, in the Sap MMC says dispwork running but message server not connected, and after few moments dispwork stopped.
I think its due to memory allocation for ABAP stack, i searched for this problem, but i didnt find good solution. Any body could sugges me in working out this problem, and also may be in the profiles folder, if there's any thing which i can add parameters for abap/buffer or abap/heap size.
Hope some could try to resolve this.
Thank you.

check fist the trace files dev_disp and dev_w0 if you really have a memory problem.
If yes:
- add /3GB /PAE /USEVA:2600 to your boot.ini and restart
- check if you need to rebase DLLs (note 664269 - Rebasing DLLs under WFP)
To avoid all those memory problems I suggest to go for 64bit platform.
Markus

(102) RFC_ERROR_COMMUNICATION: Connect to message server host failed

Hello,
I'm almost giving up on this...I've been messing with this for too long now...
I get this error message:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM
TYPE=B MSHOST=exts0002 GROUP=PUBLIC R3NAME=ANB MSSERV=sapmsANB PCS=1 ERROR       hostname 'exts0002' unknown TIME
Tue Feb 14 16:40:02 2006 RELEASE     640 COMPONENT   NI (network interface) VERSION     37 RC          -2 MODULE      ninti.c
LINE        332 DETAIL      NiPGetHostByName2: hostname 'exts0002' not found SYSTEM CALL gethostbyname_r COUNTER     1
I try to get the flightlist demo to work. I've put in "sapmsANB         3600/tcp" in services file locally in my machine (I'm using Sneak Preview SP11).
I've also done everything in "/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
I've done everything possible to get this to work, but no luck.
What is wrong here?, please help

Now I've put in "193.183.156.17     PetJoh     PetJoh.afab.local" in Hosts -> rebooted -> but still can't ping exts0002 (or the fully resolved name to it) I can't ping the actual IP nr either.
I can, however use JCO java code like:
import com.sap.mw.jco.*;
public class R3Connect extends Object {
     JCO.Client mConnection;
     public R3Connect() {
          try {
               // Change the logon     information     to your     own     system/user
               mConnection     =
               JCO.createClient(
               "100",                                        // SAP client
               "rfcuser",                                   // userid
               "jakob",                                   // password
//               null,                                        // language
               "en",                                        // language
               "anb.af.hosting.emtab.com",               // application server host name
               "00");                                        // system number
               mConnection.connect();
               System.out.println(mConnection.getAttributes());
               mConnection.disconnect();
          } catch (Exception ex) {
               ex.printStackTrace();
               System.exit(1);
     public static     void main (String args[]) {
               R3Connect app =     new     R3Connect();
This works perfectly fine to connect, Why doesn't SLD?

Connect to message server host failed Connect_PM TYPE=B MSHOST=hmsnsw00

When i deploy "TutWD_FlightBooking" Sample WebDynpro application I get following error.
I have following setup.
NetWeaver developer Studio (NWDS) Version: 2.0.9
J2EE server running on the same machine where i have NWDS Version: SAP J2EE Engine/7.00 PatchLevel 105053.42
SLD Version: 7.0009.20060621180635.0000
Build: 20060622 2041, Depot: //sdt/com.sap.lcr/645_SP_REL, Changelist: 345651
ABAP R/3 system is on remote system (accessing clients R/3 system) on the network.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=hmsnsw00 GROUP=PUBLIC R3NAME=DEV MSSERV=sapmsDEV PCS=1 ERROR timeout while pending for route completion TIME Tue Mar 13 12:04:14 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -12 DETAIL NiErrSet COUNTER 1
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457)
    at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:989)
    at com.sap.mw.jco.JCO$Client.connect(JCO.java:3193)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:90)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:122)
    ... 62 more
I get same error message when i test the JCo Metadata connection, Model data connection works fine.
The message server value under WebDynpro content admin is created with right values as i checked with Basis person.
My service file in C:/windows/system32/drivers/etc has entries for both J2EE stack entry and ABAP stack (on remote server) entry with port numbers.
When i ping the ABAP (remote server) from my machine command prompt I get response.
I am running out of options. I really appreciate your inputs.
Ramesh

Hi, I think this might have todo with the fact that your Java stack wants to connect with a server from the same logon group called "PUBLIC".
Please make sure you added the same logon group "PUBLIC" to the ABAP Server. Try transaction SMLG.
Also as posted above the SLD needs this info aswell.
After using the transaction SMLG, log in and out 5 times in a row to your ABAP stack using SAP GUI. This might actually force an update to the SLD.
Greetings,
Robbert
Message was edited by:
        Robbert van Waveren

SAPConsole / Websapconsole: Logon to message server

Similar Messages

Maybe you are looking for