Sapdata3 has been not created after Sap Neatweaver 7.3

Hi Gurus,
I have done the installation for SAP Netweaver 7.3 Java stack with distributed option with oracle database .
However file system created is sapdata1,sapdata2 , and sapdata4 has been created but sapdata3 is not created .
can any one susggest.
Regards,
Jeetendra

Hi Jeetendra,
Check whether you system is up and running ?
If yes, then sapdata3 is a folder created under /oracle/SID or /oracle based on your file system structure.
As right mentioned SAP installer will not create any file system. If file system /oracle/SID/sapdata3 is not available, SAP installer will create a folder sapdata3 under /oracle/SID and respective data files will be created under the same.
Hope this helps.
Regards,
Deepak Kori

Similar Messages

IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

     My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
3. I tried to connect to other public area's free network via WIFI, however never joined in.
     I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
     I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
Terrence

I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

Sales order do not create after SAP upgradation to package EHP7

Dear Experts,
SAP client is recently upgraded to EHP7. Since then we are observing difficulty in Sales order creation [VA01] manually [with or without order reference].
When click on SAVE button, entire screen display get freezed, without any message [Error/Information/Warning] pop-up. it seems as if system was trying to display message; caused due to any kind of event occurrence; but unable to show up.
Moreover, when we click on "BACK" or "EXIT" button, then it prompts choices to save the data. Yet again we receive the same freeze response whenever chose "Yes" option.
Please note:- before up-gradation, we were able to create orders with the same data, what we are using to create now.
Any help or clue on this subject would be highly appreciated.
Thank you for all your help.
Best regards,
Rahul Agarwal

Hi,
did you check what are the sales orders Enhancements that are activated with EHP7 under T.code-SFW5

AP has been crashing and has been "Not Responding"

I can't believe this! Ever since I chose to do the most recent update (2.1.3?), AP has been crashing and has been "Not Responding" and I almost Force Quit before it before it came back to life.
First I imported from an existing folder (using referenced) and I chose to "Move" the images.... well the images were copied NOT moved... So, I wanted to try it again with a different destination and see if I could get them moved and not copied....
I was importing a "Folder as a Project" (this time) and I chose to move the images (allowing duplicates to be present) to the newly defined location (less than 300 pics) and AP ended up crashing and now I see there are more than 9,000 images in that folder... Wow, what a royal MESS!!!!!!!
How can I undo this monstrosity mess that AP has created.....???????????????
I was very careful as I did this.... what could have caused this and how can I fix it??????
Help!
Robert

Okay, so not a popular thread....
Any thoughts???
I've been avoiding fixing the damage described above...
R

I keep getting your applie Id has been disabled even after signing out and back in, what do I do?

I keep getting your applie Id has been disabled even after signing out and back in, what do I do?

If changing your password does not work, then contact itunes support.

MIGO should not create after PO Delivery Date

Hi,
We have a PO with multiple line items and diff. Delivery Dates...
We want that during MIGO Process, Posting Date should not exceed to PO Delivery Date.
Means, if PO Delivery Date is 05.07.2014, then MIGO should not created after this date...
Please suggest.

If you want to achieve the scenario with standard settings, then you can use the field "Latest GR date".
Just put the same date as delivery date in this field. Then system will not allow to do GR if the Posting date is exceed with compare this date in MIGO.
You can find the latest GR date in Delivery tab in PO. Also you can maintain the field as mandatory in PO to avoid the field value blank as per your requirement.
Also if you want to change Latest GR date along with delivery date, just take the steps which is explained in this document Mass changes from one field to another field.
**Edited by: Dëv Päträ

IPhone case has still not arrived after months of waiting

My free iPhone case has still not arrived after months of waiting. Has anyone gotten their free case yet?

I have the same problem, so have many others.
http://discussions.apple.com/thread.jspa?threadID=2635350&tstart=0
There was no record of my order. I spent over an hour on two calls to Apple, and they refused to send me the Griffin Motif that I originally ordered. The rep. I spoke to said to be patient, it just might show up, but at this point I doubt it.

It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

Standard practices:
Restart the device (power off completely, then back on) - retest.
Reset (hold sleep wake and home buttons until apple logo appears) - you can try this, but it is most useful when your device is frozen.
Restore to factory settings - retest.
Make an appointment at an Apple retail store genius bar if the above did not resolve the issue.
HTH.

Showing I'd has not been reviewed in iTunes..and payment has been declined even after giving credit card.

Apple I'd created has been showing not reviewed in iTunes.. And the payment has been declined after giving credit details... Not sure about it..

Hello Abiez,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues adding payment information to your account. In my experience, this usually occurs due to two common reasons (though there may be more):
If your account information does not match your credit card, you may get a message stating "The credit card was declined."
To expand on the above, your billing name or address may not match the address listed on your credit card statement. Any discrepancy in punctuation, abbreviation, or capitalization can cause errors, which might prevent you from purchasing from the iTunes Store. If you moved, or if your zip code changed recently, ask your credit card company to make sure their records are up to date and match exactly what you are entering as your billing information.
The iTunes Store will place a minimal authorization hold on your credit card each time that you update your account information (equal to around 1 USD). The authorization hold is not a charge. The authorization hold is placed on your credit card to make sure that the information provided matches the information on file with your financial institution. The authorization hold will not be displayed in your iTunes Store purchase history.
If there are insufficient funds in the account to cover the authorization hold, you may experience issues with adding payment information.
For more information, see the following helpful resources:
iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
iTunes Store: Changing account information
http://support.apple.com/kb/HT1918
iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646
Thanks,
Matt M.

Netlogon and SYSVOL shares are not created after DCPROMO in Windows 2012

Hi
When i run a dcpromo on my windows 2012 server (all dc's are windows 2012)
On the new domain controller i don't have sysvol or netlogon share.
All the sugestions i found in social refer to FRS but in server 2012 DFS is used, no idea how to troubel shoot this problem.
All dcdiag on all DC before promo where clean
dcidag on srv01 the new dc shows:
Doing initial required tests
Testing server: Bas\SRV01
Starting test: Connectivity
......................... SRV01 passed test Connectivity
Doing primary tests
Testing server: Bas\SRV01
Starting test: Advertising
Warning: DsGetDcName returned information for
\\SRV09.dikkenberg.local, when we were trying to reach SRV01.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... SRV01 failed test Advertising
Starting test: FrsEvent
......................... SRV01 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SRV01 passed test DFSREvent
Starting test: SysVolCheck
......................... SRV01 passed test SysVolCheck
Starting test: KccEvent
......................... SRV01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SRV01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SRV01 passed test MachineAccount
Starting test: NCSecDesc
......................... SRV01 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SRV01\netlogon)
[SRV01] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SRV01 failed test NetLogons
Starting test: ObjectsReplicated
......................... SRV01 passed test ObjectsReplicated
Starting test: Replications
......................... SRV01 passed test Replications
Starting test: RidManager
......................... SRV01 passed test RidManager
Starting test: Services
......................... SRV01 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 21:55:22
Event String:
The WinRM service is not listening for WS-Management requests.
An error event occurred. EventID: 0x00001001
Time Generated: 02/26/2013 21:58:10
Event String:
The machine SRV01 attempted to join the domain dikkenberg.local but
failed. The error code was 1332.
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 22:00:04
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 22:08:43
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x0000008E
Time Generated: 02/26/2013 22:10:22
Event String:
The time service has stopped advertising as a time source because th
e local clock is not synchronized.
A warning event occurred. EventID: 0x00001796
Time Generated: 02/26/2013 22:24:05
Event String:
Microsoft Windows Server has detected that NTLM authentication is pr
esently being used between clients and this server. This event occurs once per b
oot of the server on the first time a client uses NTLM with this server.
......................... SRV01 failed test SystemLog
Starting test: VerifyReferences
......................... SRV01 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dikkenberg
Starting test: CheckSDRefDom
......................... dikkenberg passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dikkenberg passed test CrossRefValidation
Running enterprise tests on : dikkenberg.local
Starting test: LocatorCheck
......................... dikkenberg.local passed test LocatorCheck
Starting test: Intersite
......................... dikkenberg.local passed test Intersite
C:\Users\administrator.DIKKENBERG>
Dcdiag on good dc:
Performing initial setup:
Trying to find home server...
Home Server = SRV09
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Bas\SRV09
Starting test: Connectivity
......................... SRV09 passed test Connectivity
Doing primary tests
Testing server: Bas\SRV09
Starting test: Advertising
......................... SRV09 passed test Advertising
Starting test: FrsEvent
......................... SRV09 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SRV09 passed test DFSREvent
Starting test: SysVolCheck
......................... SRV09 passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x80000B46
Time Generated: 02/26/2013 22:42:36
Event String:
The security of this directory server can be significantly enhanced
by configuring the server to reject SASL (Negotiate, Kerberos, NTLM, or Digest)
LDAP binds that do not request signing (integrity verification) and LDAP simple
binds that are performed on a cleartext (non-SSL/TLS-encrypted) connection. E
ven if no clients are using such binds, configuring the server to reject them wi
ll improve the security of this server.
......................... SRV09 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SRV09 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SRV09 passed test MachineAccount
Starting test: NCSecDesc
......................... SRV09 passed test NCSecDesc
Starting test: NetLogons
......................... SRV09 passed test NetLogons
Starting test: ObjectsReplicated
......................... SRV09 passed test ObjectsReplicated
Starting test: Replications
......................... SRV09 passed test Replications
Starting test: RidManager
......................... SRV09 passed test RidManager
Starting test: Services
......................... SRV09 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
eries is unknown. Contact the administrator to install the driver before you log
in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
ter 400 Turbo is unknown. Contact the administrator to install the driver before
you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Verz
enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
ver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:14
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft
XPS Document Writer is unknown. Contact the administrator to install the driver
before you log in again.
A warning event occurred. EventID: 0x000016AF
Time Generated: 02/26/2013 22:34:50
Event String:
During the past 4.24 hours there have been 20 connections to this Do
main Controller from client machines whose IP addresses don't map to any of the
existing sites in the enterprise. Those clients, therefore, have undefined sites
and may connect to any Domain Controller including those that are in far distan
t locations from the clients. A client's site is determined by the mapping of it
s subnet to one of the existing sites. To move the above clients to one of the s
ites, please consider creating subnet object(s) covering the above IP addresses
with mapping to one of the existing sites. The names and IP addresses of the cl
ients in question have been logged on this computer in the following log file '%
SystemRoot%\debug\netlogon.log' and, potentially, in the log file '%SystemRoot%\
debug\netlogon.bak' created if the former log becomes full. The log(s) may conta
in additional unrelated debugging information. To filter out the needed informat
ion, please search for lines which contain text 'NO_CLIENT_SITE:'. The first wor
d after this string is the client name and the second word is the client IP addr
ess. The maximum size of the log(s) is controlled by the following registry DWOR
D value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameter
s\LogFileMaxSize'; the default is 20000000 bytes. The current maximum size is 2
0000000 bytes. To set a different maximum size, create the above registry value
and set the desired maximum size in bytes.
A warning event occurred. EventID: 0x0000000B
Time Generated: 02/26/2013 22:42:06
Event String:
Custom dynamic link libraries are being loaded for every application
. The system administrator should review the list of libraries to ensure they ar
e related to trusted applications. Please visit http://support.microsoft.com/kb/
197571 for more information.
A warning event occurred. EventID: 0x000727AA
Time Generated: 02/26/2013 22:43:09
Event String:
The WinRM service failed to create the following SPNs: WSMAN/SRV09.d
ikkenberg.local; WSMAN/SRV09.
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/26/2013 22:43:11
Event String:
Name resolution for the name _msdcs.dikkenberg.local timed out after
none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/26/2013 22:43:11
Event String:
Name resolution for the name dikkenberg.local timed out after none o
f the configured DNS servers responded.
A warning event occurred. EventID: 0x0000000C
Time Generated: 02/26/2013 22:43:13
Event String:
Time Provider NtpClient: This machine is configured to use the domai
n hierarchy to determine its time source, but it is the AD PDC emulator for the
domain at the root of the forest, so there is no machine above it in the domain
hierarchy to use as a time source. It is recommended that you either configure a
reliable time service in the root domain, or manually configure the AD PDC to s
ynchronize with an external time source. Otherwise, this machine will function a
s the authoritative time source in the domain hierarchy. If an external time sou
rce is not configured or used for this computer, you may choose to disable the N
tpClient.
A warning event occurred. EventID: 0x00001796
Time Generated: 02/26/2013 22:43:50
Event String:
Microsoft Windows Server has detected that NTLM authentication is pr
esently being used between clients and this server. This event occurs once per b
oot of the server on the first time a client uses NTLM with this server.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:12
Event String:
Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
eries is unknown. Contact the administrator to install the driver before you log
in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:16
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Verz
enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
ver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:16
Event String:
Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
ter 400 Turbo is unknown. Contact the administrator to install the driver before
you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:17
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft
XPS Document Writer is unknown. Contact the administrator to install the driver
before you log in again.
......................... SRV09 failed test SystemLog
Starting test: VerifyReferences
......................... SRV09 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dikkenberg
Starting test: CheckSDRefDom
......................... dikkenberg passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dikkenberg passed test CrossRefValidation
Running enterprise tests on : dikkenberg.local
Starting test: LocatorCheck
......................... dikkenberg.local passed test LocatorCheck
Starting test: Intersite
......................... dikkenberg.local passed test Intersite
With kind regards, Bas van den Dikkenberg

Doing primary tests
Testing server: Bas\SRV01
Starting test: Advertising
Warning: DsGetDcName returned information for
\\SRV09.dikkenberg.local, when we were trying to reach SRV01.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... SRV01 failed test Advertising
"SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE"
this error means that the DC is in USN rollback state.
srv01 is not usn rollback see:
test from other DC:
Doing primary tests
Testing server: Ouders\SRV10
Starting test: Advertising
......................... SRV10 passed test Advertising
Starting test: FrsEvent
......................... SRV10 passed test FrsEvent
Test from srv09:
Doing primary tests
Testing server: Bas\SRV09
Starting test: Advertising
......................... SRV09 passed test Advertising
Starting test: FrsEvent
......................... SRV09 passed test FrsEvent
With kind regards, Bas van den Dikkenberg

Inspection Lot not created after mvt 322.

Dear All,
I'm facing a problem : after a movement 322 no Inspection (QM) bach was created in QAVE...
In MMBE WM stock view I've got the lot number (quantity 1, stock type Q), and the storage bin which match with the inspection lot.
When trying to take the UD (QA11), the following error message appear :
MMBE :
Do you have any clue ?
Regards,

Hello Amol,
Thanks for your answer.
I gonna check QALS tomorrow as I don't have access to the system right now.
I need to make some clarifications to my previous message, in fact ten inspection lots was generated under the same material document which had 10 items (via MB1B).
9 Inspection lots has been accepted (321) and successfully put into the free stock by the quality, I only have this lot remaining coming from the same document as other ones.
Material Master/Quality Mgmt and inspection types for this article/Plant has not been changed and are correctly set...
I cannot use MB1B, mvt code 321 to move this QI stock to the free stock as QM is activated... I'll get something like "Change the inspection stock of material 0000000 in QM only".
I thinks that, to clean the stock, the only option i've got is to make an inventory from Q stock (mvt 713).
I'm trying to find out what are the root causes of this problem for this not to happen again....
Thanks again for your help,
Kevin
PS : Just checked QALS table this morning, indeed, the inspection lot does not exist.
So, i've got no trace of it in QM, but I'm able to find it in WM...
Message was edited by: Kevin Bou

PR not created after creating 3rd Party Sales Order

Hi SAP,
We have 3rd Party Sales Order process. The Problem is, PR number is not generate after creating 3rd Party Sales Order.
the problem happen for particular customer only. I already check the credit limit and its okay.
need help,

If the PR is not getting created, please click on the Incompletion log in the SO to check for any missing data.
If it is complete use VKM3 transaction to check if the SO needs a credit release., if needed relase the SO and the PR will get generated.
Check if the material is maintained for purchasing or not.

Illustrator trial has been expired immediately after downloading

Please help! I've downloaded Illustrator trial today, but after downloading I can not use it: a trial has been already expired

Then please try the software on another computer. Once a trial has expired there is not a method available to extend it.

MP Related Logs and IIS Virtual directory not created After re_installation of SCCM 2007

Hi
We have re-installed the IIS and SCCM secondary site. tried to intsall the MP role and DP role but it has not created any logs or IIS virtual directory in the secondary site server which is in WAN link.
Trouble shooting:
- checked the ports 443,445 and 80
- Disabled symantec
- exchanged the public key ( still it is in progress in Despooler log)
- checked the site to site permission and added the accounts.
please suggest further.

Yes, I know this is an old post, but I’m trying to clean them up.
What error(s) are you getting within the logs? Without these details there isn’t much anyone can do to help you.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

TR was not created after MIGO

Hi, experts
Sometimes after I did goods receipt with MIGO for purchsing order, the TR was not created by system. Normally after MIGO system create material document and TR at same time, then I use LT06 with reference the document no. place it to the storage bin.
But for this case, no TR generaged. I can only use LT10 /mvt999 to move them to the storage bin.
Can you please tell me the possible reason for this problem( TR not created)?

Can you please check what is the movement type being used ? If you were able to use LT06 in some cases means that most probably 101 is correctly defined in LE--> Interfaces --> Movement types to trigger the TR's.
1) however, if you are using / different movement type is being triggered and is not set up to create the TR.
2) If you see that the movement type is still 101, you could still be creating the TR's in the background, however, if you have a background job or some other transaction that is confirming the open TR's , this could be one of the reasons why you are not able to use LT06.
For this you can go to MIGO ( go to display tab for material document) , go to WM tab and find out the TR # there.
You can then go to LB03 and if you scroll to the right , you will find the TO # created.
Please go to LT21 and check who and how the TO is being created / confirmed, if thats something out of the process for you.
Thanks

Sapdata3 has been not created after Sap Neatweaver 7.3

Similar Messages

Maybe you are looking for