Sapdp00 timed out
When i tired to connect THRU sapgui640 I get the following error:
connection to host 68.92.41.52 service sapdp00 timed out
Component:NI
Release:640
Version:37
Module:nixxi_r.cpp
line:1067
Method:NPConnect
Return code:-12
Counter:1
I did uninstall and reinstall the software but the same problem.Anyone has any suggestions Please do let me know.
2. 问题分析:
由于安装了某些软件或病毒的干扰, 导致Windows系统注册表项
DataBasePath (HKEY_LOCAL_MACHINE/SYSTEM/currentcontrolset/Services/Tcpip/Parameters/)
的属性, 由 REG_EXPAND_SZ(扩展字符型)修改为 REG_SZ(字符型),
因此系统无法识别该注册表项的值 (通常为: %SystemRoot%\System32\drivers\etc)
3. 问题解决方法
将注册表项DataBasePath的属性改回 REG_EXPAND_SZ(扩展字符型), 示例如下:
a. 打开 系统开始菜单-> 运行, 在输入框中键入regedit
b. 按照路径
HKEY_LOCAL_MACHINE/SYSTEM/currentcontrolset/Services/Tcpip/Parameters
找到项DataBasePath
1) 首先将当前的该注册表项做备份, 例如将其重命名为DataBasePath_Old;
2) 复制该项的值, 通常为: %SystemRoot%\System32\drivers\etc;
3) 在相同目录下新建一名为DataBasePath的项, 类型为扩展字符型, 如右图所示:
4) 双击新建的项,将刚才的值复制到输入框中, 如下图所示
c. 关闭注册表编辑器, 重新登陆SAP即可
Similar Messages
-
SAP GUI 'sapdp00' timed out error
When I try to connect through sapgui640 I get the following error:
Connection to host "IP" Service 'sapdp00' timed out
Component: NI
Release: 640
Version: 37
Module: nixxi_r.cpp
line: 1070
Method: NiPConnect
Return code: -12
Counter: 1
I test the service file sapdp00 - 3200/tcp is there, also checked the registry the type of the Registry Entry "DataBasePath". %SystemRoot% is only having this type REG_EXPAND_SZ. not like this REG_SZ
Eventhough, I tried by changing the DataBasePath value from %systemroot%\system32\drivers\etc to c:\windows\system32\etc getting the same error.
Could anyone help me on this issue
GunaPrince Jose,
SAP is running, they are working on that side
Thanks,
Guna -
Sapgui error service sapdp00 timed out
Hi,
I am getting Sapgui error " connection to host ....,service sapdp00 timed out" when connecting to a remote sap system over internet. Earlier i could connect to the system without any problems. I am connecting to Internet thru a wireless network-cable connection & firewall is disabled. Recenly i configured home network(workgroup configuration) for file sharing with another system, after this configuration Sapgui is giving this error. I tried different ways but in vain. Can anybody help me regarding this.
Thanks
Pavan.Hi All,
I'm having the same error and I don't find any information on the internet to solve this issue. -
hi everybody does someone can help to fix this matter.When I try to launch
my Saplogon I have got this error msg
connection to host 10.10.0.10
service sapdp00 timed out
Component: NI (network interface)
release:640
version:37
module:nixxi_r.cpp
line:1078
method:Nipconnect
return Code -12
counter 1
thanks in advance for your help
P.S. I am a beginner on Sapopen "services"-file on C:\WINDOWS\system32\drivers\etc\
add following entry for dispatcher:
sapdp<InstanceNumber> 32<InstanceNumbger>/tcp
sample:
sapdp00 3200/tcp
add following entry for message server:
sapms<SID> 32<InstanceNumber>/tcp
sample:
sapmsC01 3200/tcp -
Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
Request timed out.- Error while opening a item in Blog
Hi,
We have a blog in our share point portal which was running properly before few days.
We get Request Timed out error while opening an item in the blog. The list contains about
3500 items
[HttpException (0x80004005): Request timed out.]
We were able to create a new item but not able to view the item.
When we check the server SQLSERVR.EXE takes more than 90% of the CPU Usage.
Please let me know how to resolve this issue.
Thanks,
VanithaHi,
According to your description, Please check the RAM allocated to your SQL server. MOSS server needs 2GB RAM
to preform well. SQL requires 2GB RAM for optimum performance.
Messages like this are mainly due to lack of RAM Allocation.
Best Regards
David Hu -
Hi
I am working on IBM AIX, Oracle 10.2.0.4 version.
Here I got the TNS-12535 error while running a report at particular time. (i.e 8:30 PM to 10:00 PM PST). But aftter this particular time it runs good.
There is no errors found in alert log file. The below is the error found in the sqlnet.log file.
Please help me to resolve this...
Time: 18-FEB-2011 17:05:53
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 78
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=host_name)(PORT=1521))
nt OS err code: 0
ThanksHi,
Nothing to investigate at the application side, there is everything to investigate at the network side.
Check the below points.
- is there any firewall in play
- is there any Network Address Translation into play
- have the correct ports been opened in the firewall
- is Oracle using random return ports (by default Oracle always uses 2 tcp/ip ports, the first one fixed, and configured in tnsnames.ora, the actual communication takes place on a radom port. If that is a problem at your site you need to fix that)
- You need to run netstat -r to identify which ports are actually used.
- Pavan kumar N -
I purchased 2 new email, adresses a few weeks ago. Both were fine but a few days ago I was stopped sending and stopped receiving emails on the one. The message comes up on my screen "connection to SMTP server (followed by my email adress) timed out. That does not mean a thing to me. What should I do please?
Thankyou.
I had been asked by ICANN some days ago to do something but I thought it was a scam so ignored it. Most other users I have spoken to have never heard of ICANN or been asked to 'register' with them or whatever. Anyway, post writing to you I have now 'registered' with them . When I now click on my incoming email adress it just says "failed to connect to server" but why it fails I do not know. -
As of yesterday, I am receiving e-mails fine; however, unable to send. Everytime I try to send an e-mail, I get "Sending of message failed. The message could not be sent because the connection to SMTP server (my mail address) timed out. Try again or contact your network administrator.
I received help from lunarpages (they host my domain); however, they were unable to resolve the issue. They suggested something is blocking IP, or need to update Thunderbird, or there's a firewall there...
Help!!!
My clients are waiting for responses to e-mails!
Thank you.To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates. -
I get the message" Your time has timed out" when i try to log on my apple id. Can you please help me?
I get the message" Your time has timed out" when i try to log on my apple id. Can you please help me?
-
Trying to update ipad2 software. Keep getting message that network connection timed out. Don't know how to cancel the firewall
Im getting the same thing...
-
Cannot login to Facebook on my iPhone 5 iOS 8.1 - Connection timed out - Error signing in
The other day, I had logged out of Facebook on my iPhone, and when I tried logging back in, it wouldn't let me. When I try to log in through the settings page, it stays on verifying for a while and says "Error signing in" and tells me there is no internet connection and when I try logging in through the facebook app, it says "Connection timed out" and asks me to make sure i have an active internet connection. The fact is my internet is working, and I can log in to facebook through safari, but not my app.
And one more thing. I have tried most of the methods mentioned in the forums. I have spent the last 2 days trying all of them from trying to create a new account using the old details, remove the phone number from facebook and try again, hard reboot by pressing the home and power buttons, resetting network and privacy settings, and reinstalling the app about 3-4 times. None of these work.
I'd be grateful if somebody can help me out with this .
Phone specs: iPhone 5, 16GB memory, iOS 8.1Dear Sir,
I did some research about your subject and I found these, please check it out
iPhone stuck on Apple logo!!! PLEASE HELP!
It may help you
<Link Edited By Host> -
When i try to update my iphone with the new software, it will give me a message that says connection time timed out, and then it says some other little things about a network not having a connection. i checked all of that and it is all fine. Im not sure why it is not working. i even restarted my laptop, all of my stuff is up to date. Does any one have any sollutions or any advice? Please and thank you!
This is asked and answered mnay times every day. The forum search abr is on the right side of this page.
Disable your firewall/security software. -
I am using iPhone 3GS. It is currently updated to IOS4.3. I am trying to update the OS to IOS5 on iTunes. It downloads the software, but it gives an error - network timed out. I have tried this multiple times. But, the end result is same.
Please help & advise as how I can upgrade the iPhone to IOS5.Temporarily turn off or disable your firewall and anti-virus software and try the download again.
Stedman -
How to download iOS 6 on iPhone 4??. Keeps saying "verification fAiled. Request has timed out"
Try try again. Thre server are heavily loaded. The connection dropped becasue the computer thinks it waited to long. Disabling your security software on the computer can help resolve this too.
Maybe you are looking for
-
Printing problem with PDF graphs from preview
Whenever I print PDF files from preview or from safari, some graphs print incorrectly, although they are displayed correctly on the screen. This only happens with black and white figures and either a negative image with the black and white are rever
-
Getting error 2096 quick time failed to initialize
Even though I have uninstalled - reinstalled and both quick time and itunes are loaded I keep getting this error message- any advice?
-
How to add a table to Favorites
Hello Friends I have this table that I keep using regularly. Everytime I want to use it, I have to give transaction code SE11 and then select the table I want etc. etc., Instead, is there a way to just put it on my favorite and once I click on it, it
-
I am writing a tag for Lasso (like php) with the Lasso Java API to use OpenOffice as a converter for documents. I wrote a function to start the service if it is not running. Unfortunately it is not running as I thought it would. Previously in c++ I u
-
Fix for "The version of the server you are trying to connect to is not supported."
Like many of you, I experienced the following problem with Lion: "The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem." I googled and found a workaround for that. It