SAPfewin Error while executing SE80 transaction

Hi All,
I am encountering an error which is occurring whenever i run SE80 transaction.The error goes like this.
"C:\perforce\bas\620_cor\SRC\FES\FEW\SAPFEWIN\GUIFUNCTINALITY.XMl Contains an invalid path."
when i click on OK button on the above message, se80 transaction gets executed but some of the feature in SE80 does not get displayed at all.
Request you to let me know what can be done to rectify this problem.Do i need to install some patch or i need to reinstall SAPgui and if thats the waht has to be taken care of while reinstalling.
Thanks a bunch
Umang

Hi Kok Chuan,
Thanks for the reply .
I am not basis consultant so i may need some more help here as i don't have basis consultant at my place.
This is the component list(below).
Can you tell me is it complying patch no 38 or higher.
If its complying them i am in a problem because it's still giving me the error.
Let me know plz what should i do next.The note number 684576 which you mentioned is also not displaying anything.
SAP_BASIS     620     0042     SAPKB62042     SAP Basis Component
SAP_ABA     620     0042     SAPKA62042     Cross-Application Component
SAP_APPL     470     0021     SAPKH47021     Logistics and Accounting
SAP_HR     470     0030     SAPKE47030     Human Resources
ABA_PLUS     100     0000          -     PLUGIN ZU ABA_PLUS
EA-IPPE     200     0004     SAPKGPIB04     EA-IPPE 200 : Add-On Installation
PI     2004_1_470     0000          -     R/3 Plug-In (PI) 2004.1 for R/3 Enterpri
PI_BASIS     2004_1_620     0003     SAPKIPYI53     Basis Plug-In (PI_BASIS) 2004_1_620
Thanks a bunch
umang

Similar Messages

Error while executing the transaction QC22 (Quality Certificate for Batch)

Hello Friends,
While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
Message no. ZQ010
Diagnosis
Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
System Response
The missing charactertistic will not be printed on the certificate,
Procedure
Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
As i am new in QM, kindly explain we were to maintain the certificate profile.
Waiting for the experts inputs.
Thanks and Regards,
Jitendra Chauhan

Hi
Try with QA33 you may have display authorization, or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
Regards
Naveen.
Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM

Error while executing the CKMLCP (Actual Costing) Transaction

Hi Expert,
I am getting the following Error while executing the CKMLCP (Actual Costing) Transaction through my User ID in system. If we execute the same transaction with other user id then there is no Error. same role is assign to both user. Try to check SU53 screen shot but it show no error
See the below error for referance:-
Internal error in program SAPLCKML_RUN_COCKPIT_ACT
Message no. CKMLRUN004
Diagnosis
An unexpected situation has appeared in program SAPLCKML_RUN_COCKPIT_ACT.
The problem has to do with a program error - the indirect result of a program error or an inconsistency in Customizing.
System Response
Processing had to be terminated.
Procedure
Inform your system administrator
Thanks
Dinesh

Hi Shyam,
Thanks Shyam,
I check this note this is not applicable for my system, In mention note Correction delivered in Support Package 600.
but support Package in my system SAP_APPL 603 SAPKH60303,
Is there any other note or solution for 603 SP
Thanks
Dinesh

Runtime error while executing transaction BDLS

Hello,
While executing BDLS transaction for converting logical system names I am getting following error
Runtime Errors         CONVT_NO_NUMBER
Except.                CX_SY_CONVERSION_NO_NUMBER
Short text
     Unable to interpret "7,160 " as a number.
How to resolve the above problem?

Hi Rachel,
BDLS creates an ABAP program SBDLS* which includes all the tables possibly including logical system names as of the domain behind the table fields. This program firstly
lives in runtime only and is checked by syntax checker.
Now, sometimes tables have inconsistencies associated with them and you
will get this dump when a syntax check is performed on them.
So please check this and regenerate the culprit tables.
So please redo the steps for BDLS and check. There are
probably some tables which could be determined by you (syntax
check - in case program has already been saved only)
An easy way to check this is to run RBDLS2LS program (old BDLS) and
afterwards performing a syntax check on generated RBDLS*** (RBDLS<(>
<<)>(>
<<(><<)>)>ClientName>) program.
Known tables which caused such dumps in the past are:
DFKKCOLFILE_P_W
DFKKKO
DFKKMKO
DFKKREP06
DFKKREP06_S
DFKKREP07
DFKKREV06
DFKKREV07
Simply reactivate the tables you find out in SE11.
Another thing which has lead to this dump in the past is
in your R/3-System the value ' x ' is
additionally added to the value of your current release in the basis
release table SVERS.
The table RSBASIDOC takes the release value from the table SVERS.
If you change value 'x' to your release in both tables (SVERS and
RSBASIDOC) and
and activate again your source system connection. This could solve the
dump too.
I hope, this helps-if not, pls open a message with SAP.(component: BC-MID-ALE)
b.rgds, Bernhard

Error While Executing Transaction Through SSO

Hi Guys,
I am trying SSO between Portal 6.0 and BW 3.5
I have added my BW system into Portal, RFC as well as JCo is working fine.
While executing any transaction its giving me following error.
http://<host_name>:<Port>/sap/bc/gui/sap/its/webgui call was terminated because the corresponding service is not available.
The termination occurred in system <SID> with error code 403 and for the reason Forbidden.*
The selected virtual host was 0 .*
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:<host_name>_<SID>_<nr>-v:0-s:403-r:Forbidden
Appretiate your response
Regards,
Sachin

Sachin,
Please refer to these links, you can have a look at the check list to figure out if you might have forgotten or missed a step while configuring the SSO.
Single Sign On between EP6.0 and BW 3.5
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/sso%2bchecklist
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6535e690-0201-0010-6989-9e27386e1f24
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/portal+implementation&
http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
Reward points if handy!
Cheers,
Sandeep

Error while executing Transaction S_ALR_87012043

Hi All,
I am getting the following error while running the Transaction S_ALR_87012043 - G/L Account Balances.
*Error Message: 'Variant SAP&001 of program RFSSLD00 is not the current version'
the long text says*
Variant SAP&001 of program RFSSLD00 is not the current version
Message no. DB634
Diagnosis
You attempted to start report RFSSLD00 using variant SAP&001. Since this variant was generated, the report SELECT-OPTIONS or PARAMETERs have changed considerably, i.e. the type or length no longer match and PARAMETERs have become SELECT-OPTIONS or vice versa. Many of these changes are so serious that even attempting to import the variant results in runtime errors.
Procedure
Adjust or delete the variant.
Is there any OSS notes available for this error??
Regards
Andrew

Thank You Ravi.
I got the OSS Notes specifically for that Error.
Note:1066048 - RFSSLD00: Variants obsolete.
Once again Thanks for your immediate reply.
Problem Solved.
Cheers
Andrew

Error while comitting a transaction in oSB. The following is the error stack

Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
        java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
        java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
        at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Error while executing the application

Hi Friends,
I am getting error while executing the application.The error is
"javax.ejb.EJBException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaction marked for rollback."
Can anybody help me..
Thanks in advance.

You need to step through a debugger and find the source of your problem as something is clearly going wrong and causing the transaction to roll back. That is all that message tells us.
m

Error while setting up Transactional Replication

Hi Team,
I am getting below error while configuring Transactional Replication.
Specifically, when I started configuring the distributor that when I am getting below error. I am getting this in GUI as well TSQL script as well.
SQL Server could not configure 'TEST-PC\SQL2K8' as a Distributor.
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Destination path D:\SQL2K8DATA is not valid. Unable to list directory contents. Specify a valid destination path.
Changed database context to 'master'. (Microsoft SQL Server, Error: 14430)
Background of the error.
========================
I installed 3 sql instances of "SQL Server 2008 Developer edition, SP3 (x64)".
I started configuring a remote distributor using one of the instance and error started popping up.
Initially I had the replication running fine and I removed it and tried to reconfigure distributor thats when the error starting popping up.
The folder physically exists and the service account has full permissions and I have logged in as service account and trying to setup Transactional Replication.
He is local administrator on the box and also sysadmin login at sql server level.
Not sure why this error is popping up.....
After wasting a lot of time. I tried to install 3 new fresh instances with same service pack level i.e. sp3, but still the error remains the same.
Appreciate if anyone can guide me resolving this issue.
Thank you.

Hi Brandon,
I generated the script and tried again. No Luck. It is throwing error at creation of distribution database itself i.e. exec sp_adddistributiondb .
/****** Scripting replication configuration. Script Date: 2/25/2014 11:43:31 AM ******/
/****** Please Note: For security reasons, all password parameters were scripted with either NULL or an empty string. ******/
/****** Installing the server as a Distributor. Script Date: 2/25/2014 11:43:31 AM ******/
use master
go
exec sp_adddistributor
@distributor = N'TEST-PC\S2',
@password = N'123'
GO
exec sp_adddistributiondb
@database = N'distribution',
@data_folder = N'C:\Program Files\Microsoft SQL Server\MSSQL10.S2\MSSQL\Data',
@log_folder = N'C:\Program Files\Microsoft SQL Server\MSSQL10.S2\MSSQL\Data',
@log_file_size = 2,
@min_distretention = 0,
@max_distretention = 72,
@history_retention = 48,
@security_mode = 1
GO
Error Message :
Msg 14430, Level 16, State 1, Procedure sp_adddistributiondb, Line 227
Destination path C:\Program Files\Microsoft SQL Server\MSSQL10.S2\MSSQL\Data is not valid. Unable to list directory contents. Specify a valid destination path.
use [distribution]
if (not exists (select * from sysobjects where name = 'UIProperties' and type = 'U '))
   create table UIProperties(id int)
if (exists (select * from ::fn_listextendedproperty('SnapshotFolder', 'user', 'dbo', 'table', 'UIProperties', null, null)))
   EXEC sp_updateextendedproperty N'SnapshotFolder', N'\\TEST-PC\repldata', 'user', dbo, 'table', 'UIProperties'
else
   EXEC sp_addextendedproperty N'SnapshotFolder', N'\\TEST-PC\repldata', 'user', dbo, 'table', 'UIProperties'
GO
exec sp_adddistpublisher @publisher = N'TEST-pc\s1',
@distribution_db = N'distribution',
@security_mode = 1,
@working_directory = N'\\TEST-PC\repldata',
@trusted = N'false',
@thirdparty_flag = 0,
@publisher_type = N'MSSQLSERVER'
GO

Error while executing report : Error in program CL_RSR_RRK0_CURR

Hi Gurus,
I am getting an error while executing a report.This error is only for one date seletion. For other selections report runs fine.Below is the error description & long text.
Please let me know if you have any solution on this.
A System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04.
System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not
permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in
the planning modeler, and if you can reproduce this termination, record a trace (transaction
RSTT).
For more information about recording a trace, see the documentation for the trace tool
environment as well as SAP Note 899572
Thanks,
Prasanna N.

Hi Prasanna,
Check the below SAp Note:
SAP Note : 1030657
Thanks,
Vijay.

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Error while resubmit the transaction in Oracle 10g B2B

Hi All,
I am facing the below error while resubmitting the transactions
bash-3.00$ java oracle.tip.adapter.b2b.data.ReSubmit
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/adapter/b2b/data/ReSubmit
bash-3.00$
Regards
sekhar

Hi Sekhar,
Make sure that you are setting the environment first by running Midtier_Home\ip\install\setenv.bat OR Midtier_Home\ip\install\setenv.sh (according to your OS). Run the resubmit command after executing this setenv file.
Regards,
Anuj

Runtime Error While executing the WebDynpro Application

I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
    No roll storage space of length 9728 available for OCCURS area.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.

Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary

Error while executing AJAB

Hello,
While executing AJAB transaction we are getting the below error message
Message no. AU075
Diagnosis
In company code, which is to be closed, APC values have not been posted to Financial Accounting for all relevant depreciation areas.
Depreciation area 30, at least, is set up for periodic posting of APC values.
The year-end closing checks if documents were posted that have an entry date after the last run of the program for periodic posting of APC values. If such documents are found, the system issues this message.
Procedure
Check which depreciation areas are supposed to post APC values periodically to Financial Accounting according to their Customizing definitions (indicator: "Post assets periodically in General Ledger")
See the Define How Depreciation Areas Post to General Ledger IMG activity.
Start the program for posting APC values. In the Asset Accounting main menu, choose Periodic processing. Start this program in update mode, regardless of whether or not documents are displayed in test mode, or if a message appears stating that there are no documents to be posted.
Start APC Posting Program
According tho the error message it is instruction to execute APC posting program. Transaction-ASKB. But i am not sure for what the tranaction is used and what would be its implication.
Please can someone explain me the same and how to solve the above error.
BR,
Zulfikar

Hello,
Thanks for your explanation. One small question.
Will there be any figures posted when I execute ASKB? since i am not allowed to make posting in 2007.
Also i have executed ASKB in our sandbox it executed successfully and when i check in SM37 it is giving me below message.
Data statistics Number of
Records passed 0
Status Acct.det-No Data.
BR,
Zulfikar

Error while executing Bapi_Alm_Order_Maintain...

Hi All,
I'm getting this error while executing Bapi_Alm_Order_Maintain.
"BAPI call-up must have a SAVE or DIALOG method"
The following is the input data structures:
IT_METHOD
RefNumber    ObjectType Method   ObjectKey
1          HEADER      CREATE       %00000000001
1          OPERATION      CREATE       %00000000001
IT_HEADER
OrderId      Order_Type   Short_Text   Priority   Mn_Wk_Ctr Wbs_Elem
%00000000001 ZWO1       Test            3       1010       00000101
IT_OPERATION
Activity Sub_Activity Description Work_Cntr Plant Control_Key
0010        0010             Test          TS-1074           ZWO1
What I need to do to create a work order transaction?
Thanks
Sundar

Try adding following line in IT_METHODS after OPERATION.
RefNumber     ObjectType        Method        ObjectKey
1                                            SAVE          %00000000001
Reward points for all the helpful answers.

SAPfewin Error while executing SE80 transaction

Similar Messages

Maybe you are looking for