SAPgui 7.20 not showing SSO login in status

Hi !
Previously in 7.10 whenever you login with SSO it would display a "success" message in bottom left-hand status bar. The message is similar to the "Processing of 0 front-end requests restarted (0 reactivated)" you get whenever you login except it would display the SNC login name or mapping with a tick for successful authenticated logins.
How do I get it to display the same in SAPgui 7.20 ?
Thanks.
Regards,
Nelis

Nelis -
I am not offering much here since I am not sure why it may not be displayed for you. I can only say that we are currently testing 7.20 and we do get the information you state is missing from the lower left corner.
It displays:
u221A SNC Logon by client userid for p:username@domain
I tried other themes just to see if it was specific to maybe not being seen in the SAP Signature Design, as I have read that some things are not where they used to be in that in that theme. I tried various ones such as Enjoy, etc. and they all seem to reflect the status once signing on via SSO.
Regards,
Zecher
*edit*
Not sure if this helps but may point you in a direction.
I did look under the performance assistant and the message that displays this information in that area is Message no. SNC009
Technical information states:
Application area SNC
Message Class SNC
Message Number 009
Package SECN
Edited by: Michael Zecher on Apr 20, 2010 11:24 AM

Similar Messages

Created a new user profile but it does not show on Login screen or fast sw

I have created a new profile that I want to be an admin profile. The creation of the profile went ok. I can see and edit the profile. When I reboot or logout, the login menu only show the inital profile that I set up when I got the system. The new user id also does not show up when I go to my fast switch menu.
My original user id is set to automatically logon when the system is started. I did try and set the new userid to be the one that started automatically on bootup and then both profiles appeared in the startup menu and fast switching menu.
If I switch back to having my original user id be the id that automatically logs in on bootup then the new user id disappears again from the login and fast switch menus. I really don't want to startup on my admin id.
Any ideas?

No not yet. I am still researching the problem. I was hoping someone in the discussion forum could help. Let me know if you find a resolution.

Blackberry icon not showing up on facebook statuses and check ins

Hi ,
When i update a status or checkin at a place using my facebook application on blackberry curve 9220 mobile , the blackberry logo/icon is not showing when i see it on facebook.
It used to be displayed on the left side bottom of the status , it is the coolest part of blackberry..
please help why its not getting displayed.

Hello ,
Will this be answered ?? I want it to be answered ! Escalate this if you people can't answer this.
Worthless to be kept in this state

Activating objects but not showing up in Cache Status Overview

Hello SDN.
We are on PI 7.1. A strange thing started happening. I can change an object and when activate, I get success, but in checking the Cache Status Overview it does not show up. We set up our SLD as follows
SC_Systems (i.e. SAP, Outside Vendors etc) (all service interfaces and actions go here)
Which is the parent of SC_Mapping (all operation and message mappings)
Which is the parent of SC_Models (all DataTypes, ED, and Message Types go here)
So
SC_SYstems
SC_Mappings
SC_Models
When making a change to the models SC and activate we get the following problem above, also for SC_Systems. But when I do this for mapping there is no issue.
One thing that is different is a new developer accessed the DataType from the SC_Systems and changed it, thus causing a conflict (We usually access and change DT, MT etc in SC_Models.
Since then it seems both are not allowing activation even though it says successful.
We have bounced the system, done all cache refreshes that I can think of and are about to go back 3 days to a backup store point, but want to see if anyone has any idea what the problem could be.
Thanks in advance
Cheers
Devlin

Hi,
It may be too obvious, but have you checked the Change Activation List?
Perhaps the objects that were edited are "pending" there.
Clear the SLD cache later.
Regards,
Caio Cagnani

Podcasts App/Stations not showing correct played/unplayed status

Hi,
there is an issue with the played/unplayed status of podcasts in the iOS Podcasts app (in iTunes everything is shown correctly, though).
When I sync new podcasts to the Podcasts app via iTunes, the majority of podcasts are not showing up as unplayed in the stations I have created. It seems that the sync from iTunes is not doing something like a "refresh" of this status on the iOS device after a sync has completed.
To fix this, I currently go into the edit section of each station and de-activate the switch for showing only unplayed and activate it right away again (without leaving that screen in the meantime). After these two clicks, I confirm and leave the edit screen. Now everything is showing up correctly with the unplayed status.
Please fix this, Apple.
Thanks

log out of your cc app and then log back in.

My Aspire 7750G does not show the login screen after upgrade to Windows 10

I have upgraded to Windows 10 on my 7750G and the update went thru smooth.But when I restart Windows it shows the windows screen with the moving dotted circle,the harddisk led stays on for a while, then starts flickering, and a blank screen is shown!After waiting - about 2 to 3 minutes - it goes directly to the lock screen, no login screen is shown.

joeboemoe,
The lock screen is where you login now, if I am not mistaken. The notebooks we have here boot to a lock screen we have to click to log in, even my PC at home does. If you want to take a look at this article we created, it might be what you are looking for.
I created a password for one of the logins on one of our notebooks and I had the option to choose Never under "If you've been away, when should Windows require you to sign in again?"

CPC Assurance - Not showing E1 CAS Channel status

Hello, I'm evaluating Cisco Prime Collaboration Assurance but I have some information on performance graphs that are not shown the right information, on E1 CAS Channel status, all channels are shown as idle, and I'll like to know what could be wrong with this or if some configuration could be missing to graph this data. Look at attached files.
Running CUCM version 9.1.2.12900-11, configured as H323 with Voice Gateway.
CPC Assurance version 10.5.0.49471(51383), patch version 1 installed
Any help that could help will be appreciated.
Regards,
Juan Carlos

This could be the cause.
Just try that. Also, which browser u are using ?If possible, try IE if Mozilla is being used.
Further, whencall is active , just run show isdn service in router and then, check status in Prime.
https://supportforums.cisco.com/document/12021121/monitoring-current-call-volume-gateway-using-cisco-prime-collaboration
regds,
aman

Oracle Enterrize Manager is not showing login page?

Hi,
I am trying to open "http://XXX:5501/em"
Then it is directed to "http://tdm:5501/em/console/database/instance/repDown".
And it is showing two options , One is Startup and other one is Perform Recovery.
And it is showing the following info.
"The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
But the database is mounted. Eveny I am able to query database. But still it is not showing the login page.
Thank you,
Regards,
Gowtham Sen.

user8897426 wrote:
I have a w2008 server x64. I installed the 32 bit version of instant client. Yes we need the 32 bit version even though this is a x64 system. What version of Server 2008?
the instant client is not showing up in the ODBC manager. In the 32-bit ODBC admin tool, from \windows\SysWoW64?

Miix 3 does not show battery status in Taskbar

Hi,
I own a new Miix 3 that works w/o problems. But it does not show the current battery status in the task bar or anywhere else. I checked windows' Device manager. There is no battery listed, only the external power device. I assume Windows 8.1 does not recognize the tablets' battery or the driver is missing. It seems the software/drivers is up to date.
Does anyone else have the same problem or see a solution for that problem?
Thanks in advance,
Kauzi

Being able to see at a glance which files are checked out/by whom below each thumbnail would be infinitely valuable, and is therefore not an option in Bridge Thumbnail Preferences. :)
If you enable Tooltips in Thumbnail Preferences, the Vc status is shown there, but one still must click or hover over each and every file to get the real Vc status. And of course, as you pointed out, the Vc status is always available for individual files in the Inspector Panel.

Last Run status of Report is not showing in Infoview

Post Author: mega-bo
CA Forum: Authentication
Hey,
Infoview is not showing the Last Run status of the Report. It is always showing 'Never Run' as a status.
Any idea how to get the Last Run info?
Cheers!

Post Author: TAZ
CA Forum: Authentication
I believe this setting is a bit misleading, last run doesn't mean the last time you accessed the reoprt or ran on - demand. It's used for the last time you scheduled a report. If you schedule the report to run now and then check back after it was run the date should change.
Regards,
Tim

User account not showing up in login screen after Leopard upgrade

One of my admin accounts is no longer showing up at log in. I did the upgrade and password suggestions on the support sight... titled Unable to log in to account after an upgrade but still no good. The only account affected did have a password of 8 characters or more.
I go to open System Preferences when in a different account with admin rights and I don't see my original account as an existing user? I can see my original stuff in the user folders, but I am not listed as a user in the Account Preferences or Login. I also cannot create a new user with the same name as my old login as that name is apparently(!) already in use. I have an account with admin rights that is showing up.
From a different thread it seems that many others are having this problem thus I think it warrents its own thread. What is the easiest way to bring back my account and data... I know it is there it just is not showing up at log in.
tbigsmo wrote this from other thread... hmmmm
One more thing, I created a new user and copied over all folders from my old user account and that didn't even think about working. The last solution was suggested by the apple 800 number. This is what I was going to try next, but now am waiting. Also the other thread was very hard to follow as many folks did not have access to a working user admin account.
How can I find myself too?

Turns out you're both right, sort of...
* The Guest Account is hidden because it's a sub 500 user, so you guys were on the money there. (I hadn't realized it was a sub-500 user...)
* Using the hint at the link posted by V.K. to hide the secret administrator hides it ONLY from the login window, but not from the Accounts section of System Preferences...so, that solution doesn't work for me. (This is going on a master image, and the users will have admin rights, so they would be able to delete the secret administrator account...)
So, I'll just have to live without having the actual Guest account active (which I need active for use with Orbicule Undercover,) and instead I created a standard user (with a few parental controls) named "Guest User."
Thanks, both of you, for your help.

SSO not authorized:no login module success

Hi Friends,
I am Geeting this error while opening the Report Designer any one help me???????
"java system error call FM_BICS_CONS_GET_VIEW_DEF_J_PROXY to progid XXXXX on host
APD with SSO not authorized:no login module success "
Regards
Vipul Kapadia

solved by basis team

Web page with javascript login shows the login in IE8 but not Firefox 9

The web page http://epgservices.sky.com/nevermiss/ loads properly in Internet Explorer 8 and shows login details but these don't show when loaded in Firefox 9.0.1
The login is generated by Javascript as far as I can see. Java is enabled and is not being blocked by AdBlock Plus because I've turned it off to see if it made any difference but the login for this website does not show

Hi cor-el,
Thank you for your reply. Earlier in my attempts to solve this problem and before contacting Firefox Help, I did start Firefox in Safe Mode after clearing the cache and the cookies from sky.com but this made no difference. The login was still not showing.
Today after trying the website on my laptop running Firefox 9.0.1 and finding the login was loading correctly I decided to uninstall Firefox but keeping my original extensions etc., and re-install Firefox from a freshly downloaded install file. It is now displaying the login correctly on that web page. I think it may have been caused by lefy-overs from previous upgrades of Firefox and the re-install cured the problem. It's amazing what problems a fresh install will solve!
Thank you for your help

Query not showing field discription in another language login

Hi Experts,
when i am running query as default language, query output is perfect.
But when i am changeing language and DE (Danish) at SAP BW login then
1) query is not showing field description at Selection Screen rather only displaying technical name
2) at query output there is no report title and column heading
Please suggest how to set language property for entire query
i guess system not able to convert language from EN to DE.
what and where setting need to change
Thanks in advance

This why at the beginning of a project you say this is English and all user shave to log in via English or if not then you build into your quote a huge amount for translation
Have a look at the help files about the translation workbench in BW - it's big and it's a expensive and time consuming thing to do
The two descriptions are stored in the query element text tables and for info objects in their specific tables- yep I suppose you could hack them - but you may end up causing more problems than it's worth
If it's a simple case of some queries need translating in a small number of languages then it's as simple as splitting yoru screne into two and loggin in twice one in english the other in the other language - first in RSA1 to change the infoobject and then in query designer (following the key strokes you use in ENglish if you language skills aren;t that good int he other languages)
The other alternative as mentioned above is using the trsnaltion workbench - but the cleitn will have get the cheque book out as it can be quite a costly exercise

OBIEE 11g login page not showing

hi,
I installed obiee11g on windows 2008 server...all OPMN process r started but still login page is not showing...Can anyone help

Hi,
what url do you use? And what port? I use (for BI answer) http://obiee-vm:7001/analytics. Port *7001* not 9001. It works for everything. http://obiee-vm:7001/em and so on.
You should try it.
bye

SAPgui 7.20 not showing SSO login in status

Similar Messages

Maybe you are looking for