SAPGui 7.20 Patch 6 - sapbarc.ocx - Error

APO users report an activex error when using /SAPAPO/CDPSO
Error is: Illegal objecttype in BarifEstimateChartforObject
I noted that the file in the Front End SAPGUI folder: sapbarc.ocx is changed with Patch 6
Previously we were at Patch 3.
Anyone else?
Bob H
Edited by: Bob Held on May 6, 2011 10:50 PM

Sven,
I opened an OSS Message as you requested. I was give the following response:
Dear Customer,
Many thanks for the information provided. Could you please kindly check
SAP note:
1584140 Barchart: BARC Error on moving timeline phantom
Let us know if this issue still exists after you applied this note.
Best regards
William
Active Global Support - Technology
SAP Asia Pacific(GMT+8)
SAP NOTE 1584140 Simply documents it as a known issue and states it will be fixed with a future patch release. No workaround is provided thus there is 'Nothing' to apply with this note.
I really would like to know is it okay to simply replace the Patch 6 version of sapbarc.ocx with the one from Patch 3 which does not generate the error. I have four users testing with this configuration and no problems reported.
Thank you,
Bob H

Similar Messages

OCX error during install of 8i personal ed on win 98 OS

I continue to get an OCX error during the installation of the personal edition that was downloaded from the site. I read some workarounds like the following:
1. Obtain patch 1507768 from Oracle Support Services via Metalink.
See Patch readme for patch installation details. [I can't get the patch because I am using the free download version]
2.
a) Copy the content of the Installation to a temporary folder on the harddisk,
rename ALL copies of file 'symcjit.dll'
b) Go to folder \install and edit file 'oraparam.ini' (attention: write
protection) and change parameter JRE_MEMORY_OPTIONS to
JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m
c) Start the installation again
[I made the suggested changes to the above files and that didn't work. Any ideas of what I should do?]

I've made a little progress ... after downloading and unzipping the 8i files, right click on the setup program's icon, select properties, then select the compatibility tab, and choose Windows98/ME. Then, go to http://jcay.com/symcjit.zip and download this later version of symcjit.dll and replace the existing symcjit.dll. After these steps, the setup program started and I got about halfway through the installation when I got "Warning: JIT compiler "symcjit" not found. WIll use interpreter."
I have no idea what to try next??????

Flash 9E OCX Errors

While trying to view or dowload webcam picture. I continue to
get iexplore msg with a problem with
Flash 9E OCX error reports. What needs to be done to correct
this problem. Thanks for your help

Ok, since this is at the top of the list in google searches,
I'll put down what I found worked to help out other people :).
Below is a transcript of a tech support question I posed with
MSN for the same problem. It may help you but you must do
everything in proper sequence.::
"Thank you for writing to MSN Entertainment Technical
Support.
This is Philippe and I am sorry to hear that you are unable
to view videos as you keep getting prompted to download the latest
Adobe Flash Player (formerly Macromedia Flash Player).
The issue you are experiencing is due to a lot of causes, as
such, solutions vary. Per our experience, the most common causes
are:
- Corrupted Flash player.
- Spyware/Adware programs installed on your computer.
- Microsoft Internet Explorer security setting is set too
high.
- The ActiveX controls are disabled.
To help you with your issue, please follow the steps below:
Note: Make sure you have the proper permissions to change any
settings on your computer. Please make sure that you are the
Administrator of the computer. If you are on a corporate network,
please contact your system ! administrator for more information. If
you are on a home network, login with an account that has
administrative permissions. If you cannot get administrative
permissions, get a person who can perform the changes for you.
I. Uninstall your current version of Adobe Flash if you have
installed it already:
a. To uninstall Flash using an uninstaller follow the
recommended steps from Adobe.
1. Go to
http://www.adobe.com/cfusion/knowled...fm?id=tn_14157
2. Download the appropriate executable and follow the steps
in the wizard.
b. If the automatic uninstall did not work, try a manual
uninstall.
1. To manually uninstall Flash Player ActiveX Control on
Windows, follow the recommended steps from Adobe. Refer to:
http://www.adobe.com/cfusion/knowled...fm?id=tn_12727
II. Restart your computer.
III. ! Reinstall Flash Player:
a. To install the latest versi on of Adobe Flash Player,
click the link below:
http://www.adobe.com/shockwave/downl...ShockwaveFlash
IV. Please check if there are spyware/adware and other
deceptive software on your computer. These may conduct certain
activities on your computer without notifying you and getting your
permission first. These activities may include displaying pop-up
advertisements, changing Web browser settings, and collecting
personal information including your password. There are a variety
of tools that can detect and remove unwanted software from your
computer. To learn more about spy ware and download the detection
and removal tools, please go to:
http://www.microsoft.com/downloads/d...displaylang=en
V. Lower your Microsoft Internet Explorer security setting.
When Internet Explorer security settings is set to High, it wil! l
not allow the necessary ActiveX controls to be used.
To reset the Internet Explorer security settings for the
current webpage, follow these steps:
a. Start Internet Explorer.
b. Click “Internet Options” on the
“Tools” menu.
c. Click “Security” in the “Internet
Options” dialog box.
d. Click “Default Level”.
e. Click “OK”.
VI. Enable the ActiveX controls. ActiveX is not a programming
language. It is a set of rules that tells software applications,
like games, how to share information and operate in Windows
operating system. Therefore, when this is disabled, MSN Video may
not operate properly.
a. Start Microsoft "Internet Explorer".
b. Click "Tools" menu.
c. Click "Internet Options".
d. Click "Security" tab.
e. Click "Internet" icon.
f. Click "Custom Level". The "S! ecurity Settings" box
appears.
g. Go to the "Set tings:" frame.
h. Select "Enable" for each of the five options under
"ActiveX controls and plug-ins".
- Automatic Prompting for ActiveX Controls
- Download Signed ActiveX Controls
- Download Unsigned ActiveX Controls
- Run ActiveX Controls and Plug-ins
- Script ActiveX Controls Marked Safe for Scripting
i. Click "OK". A "Warning!" dialog box appears.
j. Click "Yes".
k. Click "OK" to close the "Security Settings" box.
l. Click "OK" to end.
VII. Try to view videos again by visiting the link below:
http://video.msn.com
You may also want to try a few troubleshooting ! steps that
have helped resolve similar issues in the past.
I. Clear temporary Internet files and cookies. Temporary
Internet files store the information your computer exchanges with
the websites you visited. These files facilitate the communication
between your computer and the websites. As time passes, these files
become cluttered and can adversely affect the communication.
Therefore, we have to clean up the clutter to ensure seamless
communication. To clean up:
a. Start Internet Explorer.
b. Click "Tools".
c. Click "Internet Options". The "Internet Options" window
appears.
d. Click "General" tab.
e. Go to "Temporary Internet files".
f. Click "Delete Files" to delete the cache. The "Delete
Files" dialog box appears.
g. Select "Delete all offline content".
h. Click "Ok" to dele! te files.
i. Go to "Temporary Internet files". < BR/> j. Click
"Delete Cookies" to delete the cookies. The "Delete Cookies" box
appears.
k. Click "Ok" when prompted to delete cookies.
l. Click "Ok" to close the Internet Options window.
II. Clear temporary files stored in your PC. Windows Temp
folder also acts like the temporary Internet files. To remove
Windows Temp folder:
a. Click on Windows "Start" menu.
b. Click "Run". The "Run" dialog box appears.
c. Type in "%temp%" (without the quotes) on the space
provided.
d. Click "Ok" to open your Temp folder.
e. Click "Edit" menu.
f. Click "Select all" to select/highlight all files in this
folder.
g. Click "File" menu.
h. Click "Delete".
i. Click on "File".
j. Click "C! lose" to close the folder.
Note: If you are not able to delete all files, this is normal
behavior especially if the file is being used by an application
that is open.
III. Empty your recycle bin folder.
a. Right-click the Recycle Bin icon on the desktop.
b. Click "Empty Recycle Bin".
c. Click "Yes" if you are prompted to confirm that you want
to delete the files.
Furthermore, please make sure that the Adobe Flash Player
add-on for MSN Video is enabled on your Internet Explorer. Here's
how:
1. Start Internet Explorer.
2. Click "Tools".
3. Click "Internet Options".
4. Click the "Programs" tab.
5. Click the "Manage Add-ons..." button to launch the Manage
Add-ons window.
6. Choose “Shockwave Flash Object” from the list
of add-ons.
7. Click “Enable” radio box under
“Settings” option box.
7.! Click the "OK" button in "Manage Add-ons" window.
8. Click the "OK" button in the "Program" tab.
--------------------------

Best Practice: SAPGUI Version and Patch Upgrades

Hello -
Does anyone have some thoughts/information on best practices relating to SAPGUI version and patch upgrades.
Obviously, sometimes upgrades are forced upon us (e.g. 7.10 for Vista) and in other cases it may just be considered "nice to have".
Either way - it always signifies regression test and deployment effort. How do we balance the benefit and cost?
Thanks, Steve

Hi Steve,
you're right for the first part, yes, we (usually) patch twice a year.
Now for the rest
An uninstall will only happen on release changes (6.20->6.40->7.10), i. e. about every 4-5 years as SAP releases them.
Patches are applied to the installation server and the setup on the client will only update changed program parts. For example, upgrading 6.40->7.10 took about 10 minutes (incl. uninstall), applying patch 1 less than 5 minutes.
I recommend, you read the "SAP Frontend Installation Guide - 7.10" which you find at SMP alias sapgui. Navigate to Media Library - Literature. It explains setup of the installation server (sounds like a big thing, but ain't much more than creating a share), creating packages, applying updates etc.
Peter
Points always appreciated

Sapgui 7.10 patch 9 break "something" in IE 7

Hi All
AM experiencing a strange problem .. on machines that had sapgui 7.10 patch 2, upgrading til patch 9, something breaks inside IE 7, to prevent opening of new windows in IE 7 on all pages.
So basically sapgui 7.10 works perfectly, but afterwards browsing on the internet, all pages opening a new page automatically get a blank page. alle settings in IE 7 are good (pop-up windows allowed and so on).
Even more strange .. this happens ONLY on machines where IE 7 is the first browser to be installed, on machines that previously had IE 6, this dosent happen.
Searching a bit, I find that perhaps MSHTML.DLL needs to be re-registrered, but apparently this is not possible in IE 7 (regsvr32 claims that there is no entry point in the DLL).
Reinstalling IE7 ofcourse solves the problem, but the amount of workstations possibly affected is pretty large (around 50.000 all in all).
Any ideas ?

Same symptom, different cause: 3rd-party toolbars.
People are sometimes inadvertently installing Google Toolbar into their Internet Explorer.
This also causes the 'popup blocker' to appear when running BI Web Query,
We disable the Google Toolbar and then the BI Web Query works fine.
I guess this symptom might apply to other 'convenient' toolbars as well.
Best regards,
Patrick Melling.
Edited by: Go the Dockers! on Jul 16, 2010 10:24 AM

Can't get past OCX error when installing ODAC 11g on Windows Server 2003

I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
Thanks!
Michael Young
Latitude Geographics
Victoria, BC

Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
So you say you checked instant client and you still got the error? That doesn't add up...
Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
You can do this as follows:
1) Under the download links on OTN, go to the database download page.
2) Download the Oracle Database client 11g for Microsoft Windows
3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
4) Close the installer
5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
Christian

Need to download patch 5337014 for ODBC error

Hi All,
I am not abled to down load patch 5337014 for ODBC error .
If you have this patch please mail me at <email address removed by moderator>
I need it.Its very urgent

user11691341 wrote:
Hi All,
I am not abled to down load patch 5337014 for ODBC error .
Why are you not able to download it?
If you have this patch please mail me at <email address removed by moderator>
Anyone who provides you with that will be in violation of their MOS usage agreement.
I need it.Its very urgentThis is a forum of peer volunteers. There is no "urgent" here.

Adobe Flash 10c.ocx error message?

Well, my sister and I are REALLY getting angry at whatEVER this flash thing is. I run my business on the road -am gone a LOT. Tonight when I got home, I had a very important eMail letter to send. Three other windows were open -NOTHING PERTAINING TO ADOBE!!! All of a sudden, it wiped ALL of them out, shut them down and left me with this little number above, "Adobe Flash 10c.ocx" error message, to which crap vista windows informed me, "Internet Explorer has encourntered a problem with an add-on and needs to close." No warning ... just the whole letter and ALL the other pages, GONE!
If I want to do something with Adobe, I'll do it, otherwise I expect it to sit quietly in the background and keep quiet! I have enough problems with this vista "system" -WORST ever invented. Just what vista needed, something else so it can cause more headaches!
I found this forum, and I HOPE this will be fixed VERY shortly. Thanks for letting me say.
Thank God I have almost total recall when such a thing happens, but I really do not appreciate it happening in the middle of a message so important!

1. Download & use the flash Uninstaller from here: it
http://kb.adobe.com/selfservice/viewContent.do?ext...
2. Reboot to clear out any left over ocx files.
3. Rescan using Secunia PSI - if there are any insecure Flash elements left what is the path to them? U should not proceed to stage 4 until all U clear any problems found.(The overview page may look a little odd because it uses Flash for the pictorials) you can download it from www.secunia.com it's a easy tool to use just follow the commands
4. Reinstall the latest Internet Explorer Flash Player from here: ( make sure you copy the link below and open internet explorer and paste it into the address bar and press enter then download the file and it should install fine.)
http://www.filehippo.com/download_flashplayer_ie/
3A.If U are also using Firefox, Opera and other Gecko-based browsers U need this link as well: ( If you are using this browser just follow the same commands as above just copy the link below and paste it into the address bar and press enter then download the file and it shold install fine)
http://www.filehippo.com/download_flashplayer_fire...
5. Go to add/remove & double check Adobe have not installed the useless Adobe Download Manager - if U see an entry remove it.
Hope it helps for you i had the same problems took me days to work out what was wrong, let me know if it fix it. Melissa

Critical patch update fails with error code 73

RDBMS Version: 10.2.0.3
Operating System and Version: solaris 5.9
Error Number (if applicable): error code 73
Product (i.e. SQL*Loader, Import, etc.): oracle server enterpirse edition
Product Version: 10.2.0.3
Critical patch update fails with errors(urgent)
UD00_102030>pwd
/mnt/base_install/downloads/10gR2/cpu/6394981
UD00_102030> opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0
Central Inventory : /u01/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /u01/app/oracle/product/10.2.0/oui
Log file location : /u01/app/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2007-10-19_19-53-31PM.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /mnt/base_install/downloads/10gR2/cpu/6394981
Details = PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
This cpu oct 2007 patch for 10.2.0.3(for solaris)

That's great :) ...
Does anybody know which is the difference between
opatch napply
and
opatch apply ?
thanks,
P.

Installation Succeeded but Patch Failed. Download Error Support (49)

Installation Succeeded but Patch Failed. Download Error contact Support (49)

i have the exact error. I have CC for Photographer for quite some times now and it updates on and off normally until perhaps a couple of month ago. Lr updated ok. ACR updated ok. But Ps ended up with such error. I uninstall it and tried again, same error. There was one hit that mention about disabling McAfee anti-virus. Since my machine is managed by my company, I can only disable it by booting Windows (Win 7 enterprise) in Safe Mode. I did but the same error. Any other suggestion?
By the way, my other machine which I install exactly the same CC applications have no problems at all so I am quite sure it is my company machine that is causing the problem. I just need to figure out what is wrong.

Flash9d.ocx Error crashing IE 7

Hi,
I am a developer and the site I work on is causing
Flash9d.ocx errors sometimes randomly after clicking or if I leave
it running overnight will always cause it. It sounds like a memory
leak - I was wondering is there anything I can do to my code to
prevent this from happening i.e. developing it in AS3 instead of
AS2 - or does it not matter this bug will happen no matter what.
I have unistalled flash using provided unistaller and
installed newest player but it is still happening - as the site is
a very popular commericial site and we are inidated with customers
with their browser crashing and it is starting to reflect really
bad on us.
I really need a solution apart from unistall and reinstall -
I have a top spec quad core machine and only ever open one tab at a
time - but it is ridiculous to tell our customers to do this.
PLEASE CAN SOMEONE OFFER SOME DECENT ADVICE!!!!!

Please open a support case (
http://www.adobe.com/support/flash)
and ask to be escalated.

Flash10p.ocx Error on IE7

Recently did the update to Flashplayer 10.2.1. Running IE7 [for business software compatibility]. Now every time I run the Flash Player, on exit I get the Flash10p.ocx error.
Fix???
Thanks
Steve Aikens

Hi, Well I was glad to see that answered thread Thanks for marking it.
Yes, sometimes an old file doesn't get removed for some reason or the other. You may want to just take a look the next time FP updates. That happens to me almost everytime, but I check my System32 and just delete it. For me, it's just a glitch in my old XP Desktop:-)
You shouldn't have any more of those issues.
Regards,
eidnolb

Flash10g.ocx error

I use ms browser ver. ie7.0
Some flash menu occured flash10g.ocx error.
what shall I do?

I got the same error. I have Flash Builder then installed CS5. My Flash Builder shows this message when I run it in debug mode
C:\Windows\System32\Macromed\Flash\Flash10g.ocx
Flash Builder cannot locate the required debugger version of Adobe Flash Player. You might need to install the debugger version of the Flash Player or reinstall Flash Builder.
Do you want to try to debug with the current version?
I tried reinstalling everything and still get the same error. Help!

OCX Error

Hi All,
I am running a particualr application in Labview by calling a DLL from VB++. If I am running the same application in pure VB++ I am getting an OCX error. Can any body suggest any solution in this case.
Manish karnik
Application Engineer
Cruiser Controls.
Mumbai

Manish,
Could you please provide a few more details regarding your problem. First, I am unfamiliar with VB++. Are you using VC++, VB 6, or VB .NET? Perhaps, I am just unfamiliar with the language that you are using. Second, do you have a problem when you try to call the DLL from LabVIEW, or are you just having a problem when calling the DLL from your VB++? If it is working correctly in LabVIEW, but not from VB, then you may have better luck posting on a general VB forum or their may be a forum regarding your specific application. Normally, problems with DLL are related to type libraries not getting loaded properly because of missing dependency files. You may try checking out programs such as Dependency Walker to check your DLL and ensure that all support DLLs exist on your system.
Thanks,
Tyler T.

OCX Error after 256MB of FLV have loaded

I've noticed that whenever a progressive FLV over 256MB in
size is loaded into the FLVPlayback component I get an OCX error in
IE and FF on Windows (although FF doesn't specifically say 'OCX
Error'). This seems to happen right around the point where 256MB
have loaded and does not occur on the Mac at all so I suspect it's
related to ActiveX in particular. This is extremely dismal for the
project I'm working on and does not occur when using the MX FLV
components.
Any help would be appreciated...

Check your system tablespace or your portal30 default tablespace. You may have run out of space at that particular point in the install. I have had a similar problem where the install says 100% complete but it really did not run to completion due to running out of space in my system tablespace. You should have approximately 2300+ objects in Portal30 schema after a successfull install.
Good luck!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by sameer:
Hello !
I am trying to intall oracle portal with oracle 8.1.7 .
Every thing goes fine . But after the 100% installation of oracle portal , it gives the following error :
SSOHash class has not been loaded and
The enabler configuration table(WWSEC_enable_config_info) does not have any entries .
I have run the ssodatan script but that script also giving errors .
Can anyone help !
Regards<HR></BLOCKQUOTE>
null

SAPGui 7.20 Patch 6 - sapbarc.ocx - Error

Similar Messages

Maybe you are looking for