SAPGUI 7.20 patch level 7 crashes while working in ALV using drop downs
We have a set of users that work mostly in ALV transactions and can have a few open at the same time. They also use the drop downs quite frequently switching back and forth between ALV's. After working like this for awhile SAPGUI crahses.
Unfortunately we have not been able to re-create this issue so I have not entered an OSS message. The only constant is using ALV & drop downs.
We have done the following:
Patched the GUI - no help
upgraded pc's - These user received new pc's with higher memory & Windows 7 this helped slow down the amount of crashes occurring but did not eliminate them.
We have monitored the memory on the pc & that does not seem to be the issue.
Searched OSS, Google & SDN
They are using the Signature View and IE 8 .
Has anyone else experienced these issues or maybe have some suggestions on how to proceed?
Thanks,
Diane Szmurlo
Thanks for the response Jude.
I cannot say that all ALV users are affected or at least they are not reporting it. This particular group of users mainly works in ALV & with very large amount of data loaded into the ALV.
I watched the user this morning. She is filling in data using drop downs & ctrl C and ctrl V, just s few fields at a time. There was a note about copying large amount of data in ALV but that has been fixed & we have that patch.
I ran the nwcheckworkstation and it came back ok.
I wanted to trace the GUI but we cannot recreate the issue. So the trace would have to be running for sometime before the user crashes which is not even a guarantee and I am not too sure that is a good idea since traces usually produce large files. Also not too sure which GUI component to trace.
Diane
Similar Messages
-
Photoshop CC 64bit regularly crashes while working in 3D. My PC is Windows 8.1. I am trying to create 3D text but while I am adjusting extrusion depths or editing the materials, the program crashes. I am able adjust my graphics card settings to give more memory to Photoshop for 3D, but I don't know what are the best settings to use.
Here are my System Settings:
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3392 MHz
Built-in memory: 16322 MB
Free memory: 11910 MB
Memory available to Photoshop: 14588 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Disabled
TextComposer: Middle Eastern and South Asian
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=3072
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GT 640/PCIe/SSE2"
gpu[0].RendererID=4683
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.2702"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20130829000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="4.2.1"
gpu[0].OCLBandwidth=3.34988e+010
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.30 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
License Type: Subscription
Serial number: 90970360143810218198
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\Simon\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 2.71T, 2.17T free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
ACE.dll ACE 2013/10/29-11:47:16 79.548223 79.548223
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdobeLinguistic.dll Adobe Linguisitc Library 7.0.0
AdobeOwl.dll Adobe Owl 2013/10/25-12:15:59 5.0.24 79.547804
AdobePDFL.dll PDFL 2013/10/29-11:47:16 79.508720 79.508720
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1786
AdobeXMP.dll Adobe XMP Core 2013/10/29-11:47:16 79.154911 79.154911
AdobeXMPFiles.dll Adobe XMP Files 2013/10/29-11:47:16 79.154911 79.154911
AdobeXMPScript.dll Adobe XMP Script 2013/10/29-11:47:16 79.154911 79.154911
adobe_caps.dll Adobe CAPS 7,0,0,21
AGM.dll AGM 2013/10/29-11:47:16 79.548223 79.548223
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
aif_core.dll AIF 5.0 79.534508
aif_ocl.dll AIF 5.0 79.534508
aif_ogl.dll AIF 5.0 79.534508
amtlib.dll AMTLib (64 Bit) 7.0.0.249 BuildVersion: 7.0; BuildDate: Thu Nov 14 2013 15:55:50) 1.000000
ARE.dll ARE 2013/10/29-11:47:16 79.548223 79.548223
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2013/10/29-11:47:16 79.548223 79.548223
BIBUtils.dll BIBUtils 2013/10/29-11:47:16 79.548223 79.548223
boost_date_time.dll DVA Product 7.0.0
boost_signals.dll DVA Product 7.0.0
boost_system.dll DVA Product 7.0.0
boost_threads.dll DVA Product 7.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.6.30929 2.1.6.30929
CITThreading.dll Adobe CITThreading 2.1.6.30929 2.1.6.30929
CoolType.dll CoolType 2013/10/29-11:47:16 79.548223 79.548223
dvaaudiodevice.dll DVA Product 7.0.0
dvacore.dll DVA Product 7.0.0
dvamarshal.dll DVA Product 7.0.0
dvamediatypes.dll DVA Product 7.0.0
dvaplayer.dll DVA Product 7.0.0
dvatransport.dll DVA Product 7.0.0
dvaunittesting.dll DVA Product 7.0.0
dynamiclink.dll DVA Product 7.0.0
ExtendScript.dll ExtendScript 2013/10/30-13:12:12 79.546835 79.546835
FileInfo.dll Adobe XMP FileInfo 2013/10/25-03:51:33 79.154511 79.154511
filter_graph.dll AIF 5.0 79.534508
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2013/10/29-11:47:16 79.248139 79.248139
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OMP Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1785
mediacoreif.dll DVA Product 7.0.0
MPS.dll MPS 2013/10/29-11:47:16 79.535029 79.535029
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
PatchMatch.dll PatchMatch 2013/10/29-11:47:16 79.542390 79.542390
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC CC
Plugin.dll Adobe Photoshop CC CC
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 4.2.0.36
PSArt.dll Adobe Photoshop CC CC
PSViews.dll Adobe Photoshop CC CC
SCCore.dll ScCore 2013/10/30-13:12:12 79.546835 79.546835
ScriptUIFlex.dll ScriptUIFlex 2013/10/30-13:12:12 79.546835 79.546835
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Mon Feb 25 2013 16:09:10 Build 0.19078 0.19078
Required plug-ins:
3D Studio 14.2.1 (14.2.1 x001)
Accented Edges 14.2.1
Adaptive Wide Angle 14.2.1
Angled Strokes 14.2.1
Average 14.2.1 (14.2.1 x001)
Bas Relief 14.2.1
BMP 14.2.1
Camera Raw 8.3
Camera Raw Filter 8.3
Chalk & Charcoal 14.2.1
Charcoal 14.2.1
Chrome 14.2.1
Cineon 14.2.1 (14.2.1 x001)
Clouds 14.2.1 (14.2.1 x001)
Collada 14.2.1 (14.2.1 x001)
Color Halftone 14.2.1
Colored Pencil 14.2.1
CompuServe GIF 14.2.1
Conté Crayon 14.2.1
Craquelure 14.2.1
Crop and Straighten Photos 14.2.1 (14.2.1 x001)
Crop and Straighten Photos Filter 14.2.1
Crosshatch 14.2.1
Crystallize 14.2.1
Cutout 14.2.1
Dark Strokes 14.2.1
De-Interlace 14.2.1
Dicom 14.2.1
Difference Clouds 14.2.1 (14.2.1 x001)
Diffuse Glow 14.2.1
Displace 14.2.1
Dry Brush 14.2.1
Eazel Acquire 14.2.1 (14.2.1 x001)
Embed Watermark 4.0
Entropy 14.2.1 (14.2.1 x001)
Extrude 14.2.1
FastCore Routines 14.2.1 (14.2.1 x001)
Fibers 14.2.1
Film Grain 14.2.1
Filter Gallery 14.2.1
Flash 3D 14.2.1 (14.2.1 x001)
Fresco 14.2.1
Glass 14.2.1
Glowing Edges 14.2.1
Google Earth 4 14.2.1 (14.2.1 x001)
Grain 14.2.1
Graphic Pen 14.2.1
Halftone Pattern 14.2.1
HDRMergeUI 14.2.1
IFF Format 14.2.1
Ink Outlines 14.2.1
JPEG 2000 14.2.1
Kurtosis 14.2.1 (14.2.1 x001)
Lens Blur 14.2.1
Lens Correction 14.2.1
Lens Flare 14.2.1
Liquify 14.2.1
Matlab Operation 14.2.1 (14.2.1 x001)
Maximum 14.2.1 (14.2.1 x001)
Mean 14.2.1 (14.2.1 x001)
Measurement Core 14.2.1 (14.2.1 x001)
Median 14.2.1 (14.2.1 x001)
Mezzotint 14.2.1
Minimum 14.2.1 (14.2.1 x001)
MMXCore Routines 14.2.1 (14.2.1 x001)
Mosaic Tiles 14.2.1
Multiprocessor Support 14.2.1 (14.2.1 x001)
Neon Glow 14.2.1
Note Paper 14.2.1
NTSC Colors 14.2.1 (14.2.1 x001)
Ocean Ripple 14.2.1
Oil Paint 14.2.1
OpenEXR 14.2.1
Paint Daubs 14.2.1
Palette Knife 14.2.1
Patchwork 14.2.1
Paths to Illustrator 14.2.1
PCX 14.2.1 (14.2.1 x001)
Photocopy 14.2.1
Photoshop 3D Engine 14.2.1 (14.2.1 x001)
Photoshop Touch 14.0
Picture Package Filter 14.2.1 (14.2.1 x001)
Pinch 14.2.1
Pixar 14.2.1 (14.2.1 x001)
Plaster 14.2.1
Plastic Wrap 14.2.1
PNG 14.2.1
Pointillize 14.2.1
Polar Coordinates 14.2.1
Portable Bit Map 14.2.1 (14.2.1 x001)
Poster Edges 14.2.1
Radial Blur 14.2.1
Radiance 14.2.1 (14.2.1 x001)
Range 14.2.1 (14.2.1 x001)
Read Watermark 4.0
Reticulation 14.2.1
Ripple 14.2.1
Rough Pastels 14.2.1
Save for Web 14.2.1
ScriptingSupport 14.2.1
Shake Reduction 14.2.1
Shear 14.2.1
Skewness 14.2.1 (14.2.1 x001)
Smart Blur 14.2.1
Smudge Stick 14.2.1
Solarize 14.2.1 (14.2.1 x001)
Spatter 14.2.1
Spherize 14.2.1
Sponge 14.2.1
Sprayed Strokes 14.2.1
Stained Glass 14.2.1
Stamp 14.2.1
Standard Deviation 14.2.1 (14.2.1 x001)
STL 14.2.1 (14.2.1 x001)
Sumi-e 14.2.1
Summation 14.2.1 (14.2.1 x001)
Targa 14.2.1
Texturizer 14.2.1
Tiles 14.2.1
Torn Edges 14.2.1
Twirl 14.2.1
Underpainting 14.2.1
Vanishing Point 14.2.1
Variance 14.2.1 (14.2.1 x001)
Variations 14.2.1 (14.2.1 x001)
Water Paper 14.2.1
Watercolor 14.2.1
Wave 14.2.1
Wavefront|OBJ 14.2.1 (14.2.1 x001)
WIA Support 14.2.1 (14.2.1 x001)
Wind 14.2.1
Wireless Bitmap 14.2.1 (14.2.1 x001)
ZigZag 14.2.1
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Adobe Exchange
Kuler
Installed TWAIN devices: NONEThe interactive manipulations in 3D are quite dependent on the display driver for your video card. I notice yours is a bit out of date:
>gpu[0].DriverDate="20130829000000.000000-000"
It's possible a newer driver may help. Visit nVidia.com to facilitate downloading/installing their latest release.
That said, I've also found Photoshop can get flakey once you start working on 3D stuff. I've had amazing, long sessions where it just worked, and I've had others where it just wouldn't cooperate - doing exactly the same things.
It's then that you start to appreciate the auto-save in the background, but even then once in a while it doesn't auto-recover, so you want to save your work in multiple master files fairly often.
I think the latest version (14.1.2) seems about the most stable for 3D work so far.
-Noel -
Captivate 4 crashes while working with Power Builder projects..Can anyone help to solve this issue??
Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
Error: Current patch level of database is unknown. Use latest dbpatch build
hi,
I am applying EP6SP2 CM&COLL patch 5 DBPATCH.
current portal version: version=6.0.2.29.0
current C&COLL version: CM_COLL version=60 SP2 Patch 5
Before applying this patch, i applied CM&COLL patch 4 hotfix 8 and the DBPATCH included in tht. Now, after applying CM&COLL patch 5, i tried to apply DBPATCH which comes with CMOLL patch5 SAR file. My database is oracle database. While applying this patch i encountred following error:
<i>
Current database version: SP2.CM.SPs
ERROR: Error: Current patch level of database is unknown. Use the latest dbpatch build
java.lang.Exception: Error: Current patch level of database is unknown. Use the latest dbp
atch build.
at com.sapportals.wcm.tool.dbpatch.Database.getPatchList(Database.java:48)
at com.sapportals.wcm.tool.dbpatch.DBPatch.patch(DBPatch.java:66)
at com.sapportals.wcm.tool.dbpatch.DBPatch.main(DBPatch.java:26)
</i>
Now according to SAP Note 761224, they asked us to use updated DBPATCH attached to this note. But currently there are only 3 files attached of MSSQL. I want the updated ORACLE_DBPATCH files.
rgds,
NilzHi,
i m thru. i raised the question in OSS. They rectified the mistake and attached dbpatch_oracle.zip to SAP note 761224.
rgds,
Nilz -
SAPGUI 7.20 patch level 5 problem with Modification Assistant
I'm using SAPGUI 720 patch level 5 on a Windows 7 sp1 machine. There is a serious issue with modification assistant not working properly.
For some reason it does not focus on the correct code line and automatic comments are not inserted either.
Anyone else facing this issue?Hello Jason,
sounds as if this could be related to the correction from note 1569250 "Focus set to textedit toolbar on roundtrip".
I assume that a textedit control is used in the Modification Assistant - right?
If so the easiest solution for you is to apply hotfix 2 we published couple of days ago (hotfix 2 is available on SAP SMP).
Best regards,
Frank -
Crashing while working with inventor drawings.
I have a user who works with Acrobat Standard X, and uses redlining to markup inventor drawings. While working the buttons across the toolbars near the top of the window will sometimes start to disappear(black box appears over them). When that happens if the users notices he can sometimes use a keyboard shortcut in time to save the drawing before work is lost, but shortly after the application crashes with no error messages.
Is there a log or other process I can monitor to find out what is happening.
Desktop is more than adequate specs wise.
Windows 7 Enterprise 64bit.
Acrobat Standard X
Inventor 2015
Attempted to run detect and repair via Control Panel add remove programs
Re-installed application.Jesse ,
Redaction is one of the methods to protect a PDF so one can view it. This is how redacted text looks like .The black boxes have been redacted. -
hi experts !!!
dis is vamsi krishna
,actually i want to upgrade my sap b1 2007 to patch level 19.
but when i install upgrade with patch level 19.it updates.
and when i start sap application its throws error saying that
"DATABASE IS NOT CONSISTENT , PLEASE CHECK THE LOG FILE FOR MORE INFORMATIION"
please experts , help me out if there's any solutionHi,
Please restore the DB to where it was before you applied the patch.
Take the DB to a test environment and try the upgrade again? Also might be worthwhile to try a different patch to apply?
Finally contact SAP Support
Regards,
Paul -
Clips were imported from SD card into iMovie project. While working on the project, computer shut down. When restarted, all clips from that event were no longer in the project, or in the computer library. Project existed, with titles, but blank spaces exist where clips had been.
OH MY GOD! This EXACT thing just happened to me! It didn't save my event and didn't show the date in the iMovie library but if I look under all projects, the project is there. Except that there are little blank place holders where all my clips were. Also the title of the project has a little yellow "!" symbol next to it which I can only assume means that the file is corrupted.
I can't believe it destroyed like 8 hours of work!
I have a 15" mid 2011 MBP and Mavericks OS. -
CRASH REPORT
Product: Adobe Photoshop CC
Application running on:
Apple iMac 3.5GHz late 2013 / Mavericks 10.9.2
Application crashes without warning. Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application stops working, actions for appox. 10 minutes preceding crash are lost. Force Quit required to quit unresponsive / frozen application and then Restart of Adobe Photoshop CC
Crash Frequency: Three time in this work day, 5.6.14 Once a day sporadically (approximately 10 times) in past two weeks.
Other applications running at time of crashes: Adobe Bridge - NOT effected. Computer was on line with no browsers open.
Otherwise computer continued to operate normally.
I have been using Adobe Photoshop CC for approximately two months.Thanks, Chris,
I hope that this is the solution.
re: "And a crash report without an actual crash report (a long, detailed text document available from the crash report dialog), is not all that useful" :
I did in deed submit a homemade crash report.
I would have submitted "an actual Crash Report " and sooner, but: When this event occurs. there are NO dialog boxes. All frozen / blank. No possibility of "actual crash report" !
Thank you! -
Acrobat 8.1.2 Stops Working When Opening a Drop-Down Dialog Box
Whenever I try to open a drop-down dialog box in Acrobat the application stops working and Vista requests that the application be closed and that I will be notified of a solution when one is available. I've experienced the problem for six months. I must now solve this problem.
I've already tried repairing the Acrobat installation without any improvement. What should I do next?Thanks, seems to solve some of the problem, perhaps I need to uncheck more in this dialogue box... May be 'a' correct answer but not the complete solution. Anyway if all I need to do is uncheck a choice in a dialogue box then it must be a bug or driver incompatability as there seems to be no reason why I shouldn't be able to use 2D graphics acceleration.
Works if you highlight several PDFs in File Manager and then right click and 'Open with Adobe Acrobat', the error still occurs if I drag these files into an open instance of Acrobat beyond two files. Also seems to be more of a problem if one of the files is a 'colour document ' or 'greyscale document' scanned by Acrobat itself. -
Download Option Not Working in ALV Using Classes
Hi,
Can anyone let me know what im missing since i get only my header downloaded when i download my output to EXCEL.
Im using ALV using CLASSES.
Thanks,
AnitaREPORT ZTMM_STOCK MESSAGE-ID zmsg
LINE-SIZE 270
LINE-COUNT 58
NO STANDARD PAGE HEADING.
tables: YGFMLINV, "Material Ledger - Inventory Data Extract
lfa1, "Vendor Master (General Section)
setheader, "Set Header and Directory(checking profit center grp)
mseg,
t001w,
mslbh,
mslb,
t001.
Internal Tables Declaration
data: begin of i_ygfmlinv occurs 0,
BDATJ like ygfmlinv-bdatj, "Posting date YYYY
POPER like ygfmlinv-poper, "Posting period
BUKRS like ygfmlinv-bukrs, "Company Code
PRCTR like ygfmlinv-prctr, "Profit center
WERKS like ygfmlinv-werks, "Plant
BKLAS like ygfmlinv-bklas, "Valuation class
MATNR like ygfmlinv-matnr, "Material number
BWTAR like ygfmlinv-bwtar, "Valuation type
STOCK_IND like ygfmlinv-stock_ind, "Stock indicators
MEINS like ygfmlinv-meins, "Base unit of measure
MLAST like ygfmlinv-mlast, "Material Price Dtermination: Control
LBKUM like ygfmlinv-lbkum, "Total valuated stock
vprsv like ygfmlinv-vprsv, "Price control indicator
lc_mvp_prc like ygfmlinv-lc_mvp_prc, "LC:Moving Avg/Periodic Prc
LC_CURTP like ygfmlinv-LC_CURTP, "Currency Type
LC_CURRENCY like ygfmlinv-lc_currency, "Currency Key
gc_curtp like ygfmlinv-gc_curtp, "Grp.Curr Type
gc_currency like ygfmlinv-gc_currency, " Grp.Curr
LC_TOT_AMT like ygfmlinv-lc_tot_amt, "LC: Total Amount
KONTS LIKE T030-KONTS, "G/L Account No
XBILK LIKE SKA1-XBILK,
lc_cogs like ygfmlinv-lc_var_amt,
lifnr like mslbh-lifnr,
lc_trfix_amt like ygfmlinv-lc_trfix_amt,
lc_lofix_amt like ygfmlinv-lc_lofix_amt,
lc_var_amt like ygfmlinv-lc_var_amt,
lc_utp_amt like ygfmlinv-lc_utp_amt,
end of i_ygfmlinv.
data: begin of i_mslbh occurs 0,
MATNR like mslbh-matnr, "Material number
SOBKZ like mslbh-sobkz, "Special stock indicator
LIFNR like mslbh-lifnr, "Account number of vendor or creditor
WERKS like mslbh-werks, "Plant
CHARG like mslbh-charg, "Batch number
LFGJA like mslbh-lfgja, "Fiscal year of current period
LFMON like mslbh-lfmon, "Current period (posting period)
LBLAB like mslbh-lblab, "Current period (posting period)
LBINS like mslbh-lbins, "Stock in quality inspection
end of i_mslbh.
data: begin of i_MSLB occurs 0,
MATNR like mslb-matnr,
WERKS like mslb-werks,
SOBKZ like mslb-sobkz,
LIFNR like mslb-lifnr,
LFGJA like mslb-lfgja,
LFMON like mslb-lfmon,
LBLAB like mslb-lblab,
LBINS like mslb-lbins,
LBEIN like mslb-lbein,
end of i_mslb.
*data: begin of i_t030 occurs 0,
KTOPL like t030-ktopl,
BKLAS like t030-bklas,
KONTS like t030-konts,
end of i_t030.
*data: begin of i_ska1 occurs 0,
SAKNR like ska1-saknr,
XBILK like ska1-xbilk,
end of i_ska1.
DATA : BEGIN OF i_non_subc OCCURS 0,
MATNR LIKE YGFMLINV-MATNR, "Material
WERKS LIKE YGFMLINV-WERKS, "Plant,
bukrs like ygfmlinv-bukrs, "Company Code
BKLAS LIKE YGFMLINV-BKLAS, "Val Class
PRCTR LIKE YGFMLINV-PRCTR, "Profit Center
BWTAR LIKE YGFMLINV-BWTAR, "Val Type
LBKUM LIKE YGFMLINV-LBKUM, "QTY
PEINH LIKE YGFMLINV-PEINH, "Price Unit
MEINS LIKE YGFMLINV-MEINS, "Unit of Measure
lc_currency like ygfmlinv-lc_currency,
lc_curtp like ygfmlinv-lc_curtp,
gc_currency like ygfmlinv-gc_currency,
gc_curtp like ygfmlinv-gc_currency,
LC_VAR_AMT LIKE YGFMLINV-LC_VAR_AMT, "LC :Variable Amt
LC_TRFIX_AMT LIKE YGFMLINV-LC_TRFIX_AMT, "LC :Trnsfer Fixed Amt
LC_LOFIX_AMT LIKE YGFMLINV-LC_LOFIX_AMT, "LC:Local Fixed Amt.
LC_COGS LIKE YGFMLINV-LC_VAR_AMT, "Total LC fixed COGS
"added as per CC01507
LC_UTP_AMT LIKE YGFMLINV-LC_UTP_AMT, "LC:UTP Amount.
LC_TR_VAL LIKE YGFMLINV-LC_LOFIX_AMT,"TotalLC Transfer value
XBILK LIKE SKA1-XBILK, "Balance Indicator
gc_var_amt like ygfmlinv-gc_var_amt,
gc_trfix_amt like ygfmlinv-gc_trfix_amt,
gc_lofix_amt like ygfmlinv-gc_lofix_amt,
gc_cogs like ygfmlinv-gc_var_amt,
gc_utp_amt like ygfmlinv-gc_utp_amt,
gc_tr_val like ygfmlinv-gc_lofix_amt,
END OF i_non_subc.
Final Output Table
types: begin of t_output,
matnr like ygfmlinv-matnr,
lifnr like mslbh-lifnr,
werks like ygfmlinv-werks,
spstk like mslbh-lblab,
totstk like ygfmlinv-lbkum,
lc_currency like ygfmlinv-LC_CURRENCY,
lc_curtp like ygfmlinv-lc_curtp,
gc_curtp like ygfmlinv-gc_curtp,
gc_currency like ygfmlinv-gc_currency,
name1 like lfa1-name1,
vprsv like ygfmlinv-vprsv,
bukrs like ygfmlinv-bukrs,
mlast like ygfmlinv-mlast,
meins like ygfmlinv-meins,
bklas like ygfmlinv-bklas,
maktx like makt-maktx,
stdprice(18),
totval like ygfmlinv-lc_tot_amt,
sobkz like mslbh-sobkz,
end of t_output.
Work Area for Final Output Table
data: wa_output type t_output.
ALV Display
Name of Custom Container added on the screen
data: G_CONTAINER TYPE SCRFNAME VALUE 'ZGRID_CTRL',
ALV GRID Instance Reference
G_GRID1 TYPE REF TO CL_GUI_ALV_GRID, "Grid
Instance Reference to Custom Container
G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
PBO Status
data: ok_code like sy-ucomm,
Field Catalog Table
gT_FIELDCAT TYPE LVC_T_FCAT,
Layout Structure
gs_layout type lvc_s_layo,
Sorting anf Subtotal
gt_sort TYPE lvc_s_sort occurs 0,
gt_output type standard table of t_output.
data: g_curr(2).
CLASS lcl_event_receiver DEFINITION
class lcl_event_receiver definition.
public section.
Add SUB TOTAL TEXT to the ALV DISPLAY
methods handle_subtotal_text
for event subtotal_text of cl_gui_alv_grid
importing es_subtottxt_info ep_subtot_line e_event_data.
endclass.
Declaration for EVENT Receiver
data: event_receiver type ref to lcl_event_receiver,
l_subtxt(60) value 'Subtotal Text'.
field-symbols: <fs> type t_output,
<fs1>.
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
METHOD HANDLE_SUBTOTAL_TEXT.
FIELD for which the SUBTOTAL is Calculated
if es_subtottxt_info-criteria = 'MATNR'.
ASSIGN EP_SUBTOT_LINE->* TO <FS1>.
ASSIGN E_EVENT_DATA->M_DATA->* TO <FS>.
CONCATENATE es_subtottxt_info-keyword ':MATERIAL'
<fs>-matnr INTO <fs1>.
ENDIF.
ENDMETHOD. "HANDLE_SUBTOTAL_TEXT
ENDCLASS. "LCL_EVENT_RECEIVER IMPLEMENTATION
Constants
constants: c_eb(2) value 'EB',
c_m value 'M',
C_KTOPL(4) VALUE 'TCOA',
C_KTOSL(3) VALUE 'BSX',
C_KONTS(4) VALUE '002%'.
Selection Screen
selection-screen:begin of block b1 with frame title text-001.
select-options: s_lifnr for lfa1-lifnr , "Vendor
s_werks for YGFMLINV-werks obligatory, "Plant
s_prctr for YGFMLINV-prctr, "Pr.Ctr
s_matnr for ygfmlinv-matnr, "Mat.No
s_bwtar for mseg-bwtar no-display.
parameters: p_bukrs like YGFMLINV-bukrs obligatory, "C.Code
p_pctrgp like SETHEADER-SETNAME, "Pf.ct.Grp
p_poper like YGFMLINV-poper obligatory, " Period
p_bdatj like YGFMLINV-bdatj obligatory, " Year
r_ccode radiobutton group rad1 default 'X',
r_grpcur radiobutton group rad1.
selection-screen: end of block b1.
Ranges Declaration
RANGES : R_PROFIT_CTR FOR CEPC-PRCTR.
INITIALIZATON
*initialization.
Validations for Selection Screen
Validation for Vendor
at selection-screen on s_lifnr.
select single lifnr
from lfa1
into lfa1-lifnr
where lifnr in s_lifnr.
if sy-subrc ne 0.
message e039.
endif.
Validation for Plant
at selection-screen on s_werks.
select single werks
from t001w
into t001w-werks
where werks in s_werks.
if sy-subrc ne 0.
message e040.
endif.
Validation for Profit Center
at selection-screen on s_prctr.
select single prctr
from ygfmlinv
into ygfmlinv-prctr
where prctr in s_prctr.
if sy-subrc ne 0.
message e041.
endif.
Validation for Company Code
at selection-screen on p_bukrs.
select single bukrs
from t001
into t001-bukrs
where bukrs eq p_bukrs.
if sy-subrc ne 0.
message e042.
endif.
Validation for Profit Center Group
at selection-screen on p_pctrgp.
if not p_pctrgp is initial.
select single setname
from setheader
into setheader-setname
where setname eq p_pctrgp.
if sy-subrc ne 0.
message e043.
endif.
endif.
Validation for Fiscal Period
*at selection-screen on p_poper.
select single poper
from YGFMLINV
into YGFMLINV-poper
where poper eq p_poper.
if sy-subrc ne 0.
message e045.
endif.
Validation for Fiscal Year
*at selection-screen on p_bdatj.
select single bdatj
from YGFMLINV
into YGFMLINV-bdatj
where bdatj eq p_bdatj.
if sy-subrc ne 0.
message e046.
endif.
start-of-selection.
if p_pctrgp ne ' '.
perform f_profit_center_select.
endif.
perform f_data_selection. "using p_profit_center..
end-of-selection.
call screen 100.
*& Form f_data_selection
text
--> p1 text
<-- p2 text
FORM f_data_selection.
data: l_flg,
l_lblab like mslbh-lblab,
l_name1 like lfa1-name1,
l_rate like mslbh-lblab,
l_maktx like makt-maktx,
l_diff_stk like mslbh-lblab,
l_totval like ygfmlinv-lc_tot_amt.
From profit center group get Profit Center
LOOP AT R_PROFIT_CTR.
IF R_PROFIT_CTR-LOW EQ R_PROFIT_CTR-HIGH.
R_PROFIT_CTR-OPTION = 'EQ'.
R_PROFIT_CTR-HIGH = SPACE.
MODIFY R_PROFIT_CTR.
ENDIF.
ENDLOOP.
if r_ccode eq 'X'.
g_curr = '10'.
else.
g_curr = '30'.
endif.
if g_curr eq '10'.
Fetch TOTAL STOCK ,VALUE from ML - Inv. Data Extract Table
select BDATJ POPER BUKRS PRCTR WERKS BKLAS MATNR
BWTAR STOCK_IND MEINS MLAST LBKUM
vprsv lc_mvp_prc LC_CURTP
LC_CURRENCY LC_TOT_AMT
lc_var_amt LC_UTP_AMT
lc_trfix_amt lc_lofix_amt
gc_curtp gc_currency
from YGFMLINV
into corresponding fields of table i_YGFMLINV
where bdatj eq p_bdatj and
poper eq p_poper and
bukrs eq p_bukrs and
werks in s_werks and
matnr in s_matnr and
STOCK_IND eq c_m and
trans_type eq c_eb and
lc_curtp eq g_curr.
else.
Fetch TOTAL STOCK ,VALUE from ML - Inv. Data Extract Table
select BDATJ POPER BUKRS PRCTR WERKS BKLAS MATNR
BWTAR STOCK_IND MEINS MLAST LBKUM
vprsv lc_mvp_prc LC_CURTP
LC_CURRENCY LC_TOT_AMT
lc_var_amt LC_UTP_AMT
lc_trfix_amt lc_lofix_amt
gc_curtp gc_currency
from YGFMLINV
into corresponding fields of table i_YGFMLINV
where bdatj eq p_bdatj and
poper eq p_poper and
bukrs eq p_bukrs and
werks in s_werks and
matnr in s_matnr and
STOCK_IND eq c_m and
trans_type eq c_eb and
gc_curtp eq g_curr.
endif.
Delete Entries not in Profit Center range
LOOP AT I_YGFMLINV.
IF NOT I_YGFMLINV-PRCTR IN R_PROFIT_CTR.
DELETE I_YGFMLINV.
ENDIF.
ENDLOOP.
if not i_ygfmlinv[] is initial.
data l_date like mkpf-budat.
move : p_bdatj to l_date(4),
p_poper to l_date+4(2),
'31' to l_date+6(2).
Get the TOTAL STOCK for Vendor and Material
SELECT MATNR
WERKS
CHARG
SOBKZ
LIFNR
LFGJA
LFMON
LBLAB
LBINS
FROM MSLBH INTO corresponding fields of TABLE I_MSLBH
for all entries in i_ygfmlinv
WHERE MATNR eq i_ygfmlinv-matnr and
WERKS EQ i_ygfmlinv-WERKS AND
SOBKZ in p_stkind AND
LIFNR in s_LIFNR AND
LFGJA GE P_BDATJ and
lfmon eq p_poper.
if sy-subrc eq 0.
DELETE I_MSLBH WHERE LFGJA EQ P_BDATJ AND
LFMON LT P_POPER.
endif.
endif.
sort i_mslbh by matnr lifnr werks lfgja lfmon.
sort i_ygfmlinv by matnr werks bdatj poper.
loop at i_mslbh.
l_lblab = l_lblab + i_mslbh-lblab.
at end of lifnr.
l_flg = 'X'.
endat.
read table i_ygfmlinv with key matnr = i_mslbh-matnr
werks = i_mslbh-werks
bdatj = i_mslbh-lfgja
poper = i_mslbh-lfmon
binary search.
if sy-subrc eq 0.
select single name1 from lfa1 into l_name1
where lifnr eq i_mslbh-lifnr.
if sy-subrc eq 0.
select single maktx
from makt
into l_maktx
where matnr eq i_mslbh-matnr and
spras eq sy-langu.
if l_flg eq 'X'.
Subtract Total stk from Special Stock Vendor to get the difference
l_diff_stk = i_ygfmlinv-lbkum - l_lblab.
move : i_mslbh-matnr to wa_output-matnr,
i_mslbh-lifnr to wa_output-lifnr,
i_mslbh-werks to wa_output-werks,
l_lblab to wa_output-totstk,
l_name1 to wa_output-name1,
i_ygfmlinv-vprsv to wa_output-vprsv,
i_ygfmlinv-meins to wa_output-meins,
i_ygfmlinv-lc_mvp_prc to wa_output-stdprice,
i_ygfmlinv-mlast to wa_output-mlast,
i_ygfmlinv-bukrs to wa_output-bukrs,
i_ygfmlinv-bklas to wa_output-bklas,
i_mslbh-sobkz to wa_output-sobkz.
if g_curr eq '10'.
move: i_ygfmlinv-lc_curtp to wa_output-lc_curtp,
i_ygfmlinv-lc_currency to wa_output-lc_currency.
else.
move: i_ygfmlinv-gc_curtp to wa_output-gc_curtp,
i_ygfmlinv-gc_currency to wa_output-gc_currency.
endif.
if wa_output-totstk ne 0.
l_rate = i_ygfmlinv-LC_TOT_AMT / i_ygfmlinv-lbkum.
wa_output-totval = l_rate * l_lblab.
endif.
append wa_output to gt_output.
move wa_output-totval to l_totval.
clear: l_rate,wa_output.
if l_diff_stk ne 0.
wa_output-totval = i_ygfmlinv-LC_TOT_AMT - l_totval.
move: i_mslbh-matnr to wa_output-matnr,
*Included - Remove
i_mslbh-matnr to wa_output-matnr,
i_mslbh-werks to wa_output-werks,
l_diff_stk to wa_output-totstk,
i_ygfmlinv-vprsv to wa_output-vprsv,
i_ygfmlinv-meins to wa_output-meins,
i_ygfmlinv-lc_mvp_prc to wa_output-stdprice,
i_ygfmlinv-mlast to wa_output-mlast,
i_ygfmlinv-bukrs to wa_output-bukrs,
i_ygfmlinv-bklas to wa_output-bklas.
if g_curr eq '10'.
move: i_ygfmlinv-lc_curtp to wa_output-lc_curtp,
i_ygfmlinv-lc_currency to wa_output-lc_currency.
else.
move: i_ygfmlinv-gc_curtp to wa_output-gc_curtp,
i_ygfmlinv-gc_currency to wa_output-gc_currency.
endif.
append wa_output to gt_output.
clear: i_ygfmlinv,l_flg,l_lblab,l_name1,wa_output,
i_mslbh.
endif.
endif.
endif.
endif.
endloop.
sort: i_ygfmlinv by matnr werks,
i_mslbh by matnr werks.
LOOP AT I_YGFMLINV.
read table i_mslbh with key matnr = i_ygfmlinv-matnr
binary search.
if sy-subrc eq 0.
delete i_ygfmlinv.
clear i_ygfmlinv.
else.
MOVE-CORRESPONDING I_YGFMLINV TO i_non_subc.
APPEND i_non_subc.
CLEAR I_YGFMLINV.
endif.
ENDLOOP.
sort i_non_subc by matnr werks.
data: l_lc_cogs(16) type p decimals 2,
l_lc_tr_val(16) type p decimals 2,
l_gc_cogs(16) type p decimals 2,
l_gc_tr_val(16) type p decimals 2.
LOOP AT i_non_subc.
if g_curr eq '10'.
l_LC_COGS = i_non_subc-LC_TRFIX_AMT +
i_non_subc-LC_LOFIX_AMT.
l_LC_TR_VAL = i_non_subc-LC_VAR_AMT + l_LC_COGS +
i_non_subc-LC_UTP_AMT.
else.
l_gc_cogs = i_non_subc-gc_trfix_amt + i_non_subc-gc_lofix_amt.
l_gc_tr_val = i_non_subc-gc_var_amt + i_non_subc-gc_cogs +
i_non_subc-gc_utp_amt.
endif.
at end of matnr.
l_flg = 'X'.
endat.
if l_flg eq 'X'.
move: i_non_subc-matnr to wa_output-matnr,
i_non_subc-werks to wa_output-werks,
i_non_subc-lbkum to wa_output-totstk,
i_non_subc-meins to wa_output-meins,
i_non_subc-bukrs to wa_output-bukrs,
i_non_subc-bklas to wa_output-bklas,
i_non_subc-lc_curtp to wa_output-lc_curtp,
i_non_subc-lc_currency to wa_output-lc_currency,
i_non_subc-gc_curtp to wa_output-gc_curtp,
i_non_subc-gc_currency to wa_output-gc_currency.
if g_curr eq '10'.
move l_lc_tr_val to wa_output-totval.
else.
move l_gc_tr_val to wa_output-totval.
endif.
i_non_subc-mlast to wa_output-mlast.
select single maktx
from makt
into l_maktx
where matnr eq i_non_subc-matnr and
spras eq sy-langu.
if sy-subrc eq 0.
move l_maktx to wa_output-maktx.
append wa_output to gt_output .
clear: wa_output,l_flg,l_lc_tr_val,l_lc_cogs,
l_gc_cogs,l_gc_tr_val.
endif.
endif.
ENDLOOP.
ENDFORM. " f_data_selection
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZPF_STATUS'.
SET TITLEBAR 'ZTITLE'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module alv_display OUTPUT
text
MODULE alv_display OUTPUT.
data: total type ref to data,
subtotal1 type ref to data.
field-symbols <total> like gt_output .
field-symbols <subtotal1> like gt_output.
if g_grid1 is initial.
perform f_create_objects.
perform f_build_field_catalog changing gt_fieldcat.
perform f_prepare_layout changing gs_layout.
perform f_sort_sub_total changing gt_sort.
CALL METHOD G_GRID1->GET_SORT_CRITERIA
IMPORTING
ET_SORT = gt_sort[] .
CALL METHOD g_grid1->GET_SUBTOTALS
IMPORTING
EP_COLLECT00 = total
EP_COLLECT01 = subtotal1 .
EP_COLLECT02 =
EP_COLLECT03 =
EP_COLLECT04 =
EP_COLLECT05 =
EP_COLLECT06 =
EP_COLLECT07 =
EP_COLLECT08 =
EP_COLLECT09 =
ET_GROUPLEVELS = .
assign total->* to <total>.
assign subtotal1->* to <subtotal1>.
*ALV Display - Specify Sorting,Filtering Criteria
if gt_output[] is initial.
message i015.
endif.
CALL METHOD G_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
IT_OUTTAB = gt_output[]
IT_FIELDCATALOG = gt_fieldcat
IT_SORT = gt_sort[]
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
else.
CALL METHOD G_GRID1->REFRESH_TABLE_DISPLAY
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
ENDMODULE. " alv_display OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
case ok_code.
when 'BACK'.
set screen '0'.
leave screen.
when 'EXIT' or 'CANCEL'.
PERFORM EXIT_PROGRAM.
endcase.
clear ok_code.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form f_create_objects
text
--> p1 text
<-- p2 text
FORM f_create_objects.
Creating Custom Container Objects and GRID
IF G_grid1 IS INITIAL.
*Creating Custom Container Instance
Pass the name of the control that you have created on the screen
CREATE OBJECT G_CUSTOM_CONTAINER
EXPORTING CONTAINER_NAME = 'ZGRID_CTRL'.
*Creating ALV Grid Instance
CREATE OBJECT G_GRID1 EXPORTING I_PARENT = G_CUSTOM_CONTAINER.
endif.
ENDFORM. " f_create_objects
*& Form f_build_field_catalog
text
--> p1 text
<-- p2 text
FORM f_build_field_catalog changing pt_fieldcat type lvc_t_fcat.
data ls_fcat type lvc_s_fcat.
Val Type
ls_fcat-fieldname = 'BUKRS'.
ls_fcat-inttype = 'C'.
ls_fcat-outputlen = '4'.
ls_fcat-coltext = 'Val.Type'.
ls_fcat-seltext = 'Val.Type'.
ls_fcat-col_pos = '1'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
Val.Class
ls_fcat-fieldname = 'BKLAS'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-outputlen = '4'.
ls_fcat-coltext = 'Val.Class'.
ls_fcat-seltext = 'Val.Class'.
ls_fcat-col_pos = '2'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Plant
ls_fcat-fieldname = 'WERKS'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-outputlen = '4'.
ls_fcat-coltext = 'Plant'.
ls_fcat-seltext = 'Plant'.
ls_fcat-col_pos = '3'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Material
ls_fcat-fieldname = 'MATNR'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-outputlen = '18'.
ls_fcat-coltext = 'Material'.
ls_fcat-seltext = 'Material'.
ls_fcat-col_pos = '4'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Description
ls_fcat-fieldname = 'MAKTX'.
ls_fcat-TABNAME = 'MAKT'.
ls_fcat-outputlen = '40'.
ls_fcat-coltext = 'Description'.
ls_fcat-seltext = 'Description'.
ls_fcat-col_pos = '5'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Price Control
ls_fcat-fieldname = 'VPRSV'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-outputlen = '1'.
ls_fcat-coltext = 'Price Control'.
ls_fcat-seltext = 'Price Control'.
ls_fcat-col_pos = '6'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Price Determination
ls_fcat-fieldname = 'MLAST'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-outputlen = '1'.
ls_fcat-coltext = 'Price Determination'.
ls_fcat-seltext = 'Price Determination'.
ls_fcat-col_pos = '7'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
Total Stock
ls_fcat-fieldname = 'TOTSTK'.
ls_fcat-REF_TABLE = 'YGFMLINV'.
ls_fcat-REF_FIELD = 'LBKUM'.
ls_fcat-QFIELDNAME = 'MEINS'.
ls_fcat-IFIELDNAME = 'YGFMLINV'.
ls_fcat-coltext = 'Total Stock'.
ls_fcat-seltext = 'Total Stock'.
ls_fcat-col_pos = '8'.
ls_fcat-do_sum = 'X'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
Std. Price
ls_fcat-fieldname = 'STDPRICE'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-REF_TABLE = 'YGFMLINV'.
ls_fcat-ref_field = 'LC_MVP_PRC'.
ls_fcat-coltext = 'Std.Price'.
ls_fcat-col_pos = '9'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
if g_curr eq '10'.
Currency Type
ls_fcat-fieldname = 'LC_CURTP'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-coltext = 'Currency Type'.
ls_fcat-seltext = 'Currency Type'.
ls_fcat-col_pos = '10'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
else.
Currency Type
ls_fcat-fieldname = 'GC_CURTP'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-coltext = 'Currency Type'.
ls_fcat-seltext = 'Currency Type'.
ls_fcat-col_pos = '10'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
endif.
*Per Unit Price
ls_fcat-fieldname = 'STDPRICE'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-ref_table = 'YGFMLINV'.
ls_fcat-ref_field = 'LC_MVP_PRC'.
ls_fcat-currency = 'LC_CURRENCY'.
ls_fcat-coltext = 'Per.Unit.Price'.
ls_fcat-seltext = 'Per.Unit.Price'.
ls_fcat-col_pos = '11'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
Quantity Measurement
ls_fcat-fieldname = 'MEINS'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-coltext = 'Base Unit'.
ls_fcat-seltext = 'Base Unit'.
ls_fcat-col_pos = '12'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Total Value
ls_fcat-fieldname = 'TOTVAL'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-currency = 'GC_CURRENCY'.
ls_fcat-coltext = 'Total Value'.
ls_fcat-seltext = 'Total Value'.
ls_fcat-col_pos = '13'.
ls_fcat-do_sum = 'X'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Value/period
ls_fcat-fieldname = 'TOTVAL'.
ls_fcat-TABNAME = 'YGFMLINV'.
ls_fcat-currency = 'GC_CURRENCY'.
ls_fcat-coltext = 'Value/Period'.
ls_fcat-seltext = 'Value/Period'.
ls_fcat-col_pos = '14'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Vendor
ls_fcat-fieldname = 'LIFNR'.
ls_fcat-TABNAME = 'LFA1'.
ls_fcat-coltext = 'Vendor'.
ls_fcat-seltext = 'Vendor'.
ls_fcat-col_pos = '15'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Vendor Description
ls_fcat-fieldname = 'NAME1'.
ls_fcat-TABNAME = 'LFA1'.
ls_fcat-coltext = 'Vend.Desc'.
ls_fcat-seltext = 'Vend.Desc'.
ls_fcat-col_pos = '16'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
*Special Stock Indicator
ls_fcat-fieldname = 'SOBKZ'.
ls_fcat-TABNAME = 'MSLBH'.
ls_fcat-coltext = 'Spl.Stock Ind'.
ls_fcat-seltext = 'Spl.Stock Ind'.
ls_fcat-col_pos = '17'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
ENDFORM. " f_build_field_catalog
*& Form f_prepare_layout
text
<--P_GS_LAYOUT text
FORM f_prepare_layout CHANGING P_GS_LAYOUT type lvc_s_layo.
p_gs_layout-zebra = 'X'.
p_gs_layout-grid_title = 'Material List: Prices and Inventory Values'.
p_gs_layout-smalltitle ='X'.
p_gs_layout-no_totline = 'X'.
p_gs_layout-no_totarr = 'X'.
p_gs_layout-no_totexp = 'X'.
p_gs_layout-totals_bef = 'X'.
ENDFORM. " f_prepare_layout
*& Form f_profit_center_select
Validate the Profit Center Groups with Profit Center
--> p1 text
<-- p2 text
FORM f_profit_center_select.
DATA:V_RETCODE LIKE BAPIRET2,
V_GROUPNAME LIKE BAPICO_GROUP-GROUPNAME ,
p_kokrs like CEPC-KOKRS value 'DU01',
I_HIERARCHYNODES LIKE BAPISET_HIER OCCURS 0 WITH HEADER LINE,
I_PRCTR LIKE BAPI1116_VALUES OCCURS 0 WITH HEADER LINE.
V_GROUPNAME = P_PCTRGP.
CALL FUNCTION 'BAPI_PROFITCENTERGRP_GETDETAIL'
EXPORTING
CONTROLLINGAREA = P_KOKRS
GROUPNAME = V_GROUPNAME
IMPORTING
RETURN = V_RETCODE
TABLES
HIERARCHYNODES = I_HIERARCHYNODES
HIERARCHYVALUES = I_PRCTR.
LOOP AT I_PRCTR.
R_PROFIT_CTR-LOW = I_PRCTR-VALFROM.
R_PROFIT_CTR-HIGH = I_PRCTR-VALTO.
R_PROFIT_CTR-SIGN = 'I'.
R_PROFIT_CTR-OPTION = 'BT'.
APPEND R_PROFIT_CTR.
ENDLOOP.
ENDFORM. " f_profit_center_select
*& Form f_sort_sub_total
text
<--P_GT_SORT text
FORM f_sort_sub_total CHANGING P_GT_SORT.
DATA: ls_sort TYPE lvc_s_sort occurs 0 with header line.
ls_sort-spos = '1' .
ls_sort-fieldname = 'MATNR'.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
ls_sort-expa ='X'.
ls_sort-group = 'UL'.
append ls_sort TO gt_sort.
ENDFORM. " f_sort_sub_total
*& Form EXIT_PROGRAM
text
--> p1 text
<-- p2 text
FORM EXIT_PROGRAM.
data: g_repid like sy-repid.
g_repid = sy-repid.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
IF SY-SUBRC NE 0.
add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
TITEL = G_REPID
TXT2 = SY-SUBRC
TXT1 = 'Error in Flush'(009).
ENDIF.
LEAVE PROGRAM.
ENDFORM. " EXIT_PROGRAM -
When using certain sites like Linkedin Firefox seems to bug out, for example drop down menu's do not work and oddly enough when I reply to any email Firefox seems to be unable to register who I am replying too, this was fine until last weekend. I have tried reinstalling Firefox and checking add-ons nothing seems to work, other browsers like GC and IE work fine,
Also not a great support system for FF
Thanks
OliverPlease see if the sites you are having problems with work in Firefox's safe mode. Exit Firefox then Start > All Programs > Mozilla Firefox > Mozilla Firefox (safe-mode).
http://support.mozilla.com/en-US/kb/Safe+Mode -
PP crashing while working in Sequence [\TrackItemTrack.cpp-639]
Hi,
first Post, I'll try to do well in first attempt.
PP 5.5 is crashing with this Debug Event PopUp
[..\Src\Sequence\TrackItemTrack.cpp-639]
let's me "continue" and then it is broken.
This happens I think randomly soon after I start working with the project. Once it happened right when I right-clicked on a clip in the sequence, but it also happens while watching a tape.
First it was either this or an slightly different error, I tried to fix by removing some .jpg images from the library and the cache folder which made the error to occur "later" after opening the project again.
Now, I tried to disable - enable my sequence content and to import the sequence from another copy of the project.
PP5.5
Windows 7 64-bit
PP on Windows SSD (120 gb)
1440*1080 HD Material on 1tb HDD
Radeon HD 4870 with 11.10 driver
Speedfan shows normal temperatures Procces Explorer shows http://imgur.com/MH10T
PP Screenshot http://imgur.com/rHhFW
Edit: Also, when I want to add clips from Source Monitor, they seem at normal size when moving over the sequence and seem shortened when placing them. And this happens also http://www.youtube.com/watch?v=XCZ0nsU6c88Congrats on a nicely documented first post. The only thing missing is a screenshot of the error message itself and when exactly it happens and where on the timeline when playing, so we may be able to reproduce that error.
Your Process Explorer screenshots are very nice to see. Your system with only two disks and stuck in software MPE mode, due to the Radeon card, can use all the help it can get to make for comfortable editing. From that perspective you should really tune your system. See this link that also applies to Win7: Adobe Forums: Guide for installing and tuning a Vista...
From a quick look at all the processes running, I assume you still have the sidebar installed. If so, completely uninstall it from Control Panel. Kill all the Apple processes like iTunes, iPod, mDNSResponder. Do the same for all the G Data anti virus and firewall processes, kill all the unnecessary Logitech utilities and possibly the Acronis imaging software. That will free a lot of resources, making for a snappier editing experience. Last, don't run Chrome when editing. -
Media Encoder CC crashes while working on queued H264 files.
While I am editing my videos I send them to Adobe Media Encoder CC as H264 for youtube. Even with only encoder running windows 7 crashes with the blue screen. This is the only program that causes this. I was looking to uninstall this program and it is not an option in control panel. Do I have to uninstall Premiere CC to have this removed? I was going to try an uninstall/reinstall to test if this fixes it. The machine is a current machine with 64GB ram running on SSD.
Thanks allA BSOD on Windows 7 is most often a sign of a serious problem, much more frequently caused by faulty hardware or driver than the actual software running when the crash occurred.
As exports often push a system to it's limits, I'd probably start by looking at the cooling of your system. -
Crash While Working With an Image Sequence
So I am working with an image sequence in my timeline and every time I touch that clip (either to render it or move it) Premiere crashes.
I am working on an iMac with 32 GB of Ram with OS X 10.10.3 installed. I recently upgraded from Premiere Pro CS6 to CC and since
then I am unable to work with it.
Here is the error log I keep getting:
Process: Adobe Premiere Pro CC 2014 [839]
Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier: com.adobe.AdobePremierePro
Version: 8.2.0 (8.2.0)
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: Adobe Premiere Pro CC 2014 [839]
User ID: 501
Date/Time: 2015-04-18 16:36:11.311 -0700
OS Version: Mac OS X 10.10.3 (14D136)
Report Version: 11
Anonymous UUID: 06821F38-EC27-D4F0-775A-7CB2D2257EE6
Time Awake Since Boot: 3900 seconds
Crashed Thread: 24 Dispatch queue: opencl_runtime
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008It seems to happen when I am not using any tools. When I have a photo open for any purpose.
It occurs with no input. I fix it by zooming back to where I was.
I am not working with a tablet. I am not working with a mouse.
I will need to look up these preferences. I did not know they existed.
Thanks.
Duane
Maybe you are looking for
-
Why does my mid-2010 Macbook Pro suffer from huge FPS drops whenever I try to play games?
Macbook info: 2.66 GHz Intel Core i7, 4GB 1067 MHz DDR3, nVIDIA GeForce GT 330M 512MB When I play games on my Macbook Pro, such as League of Legends, Diablo III, World of Warcraft, etc., they operate well with latency of ~80ms usually and fps startin
-
HELP!: Suggestions need on how to BU/sync 2 phones
Hi... I'm in dutch cause my wife lost her contacts on her phone and I had not been Backing the phone up... Whoopsie! I have iTunes 09 on Leopard and 2 user accounts one for my wife and one for me. Each user account has its own Address Book for contac
-
The menu doesnt show up when the DVD is played...
i create a menu and the movie is added in a button. but when the dvd is inserted, the menu does not show up. it goes straight to the video, and when i press the menu button the remote, it says it is not permitted. what do i do?
-
Hello everyone! Im trying to figure out why password reset is failing all the time. We have two servers in our environment. 1 for FIMSync and service, and 1 for SSPR. There is no firewall on, DCOM and WMI is verified, SPN is all setup, SSPR registrat
-
I installed iLife '06 yesterday and I'm noticing the RAW images that I corrected in Photoshop CS then saved back to iPhoto are being reverted back to the original state before the RAW fix in Photoshop. I double click on a RAW edited photo to open up