SAPGUI 710 Graphical Layout Editor not available in LAN

Hi,
I recently installed sneakpreview NW04s for ABAP at home and the SAPGUI 710 software. The graphical layout editor doesn't work. I have checked all requirements such as, required dll and exe files. They are all available. The problem occurs only when I try to start the graphical editor from another pc in my LAN. If I start it on the application server where I have installed NW04s and the SAPGUI, it works fine. Only when I access to the application server from other pc in my home network, it fails to start the graphical editor. I've read that there must be a problem with firewall / port somewhere. I don't know where I can check whether this is the cause. I am using D-Link wireless for my home network.
Can anybody help me with this?
Thanks in advance,
Shahram

I tried SM59 and ran a connection test for EU_SCRP_WN32. It started gnetx.exe, the window appeared shortly. But, the connection failed with the following error message:
ERROR                timeout during allocate
LOCATION             SAP-Gateway on host OFFICE / sapgw00
DETAIL               no connect of TP gnetx.exe from host %%SAPGUI%%
COMPONENT            SAP-Gateway
COUNTER              5824
MODULE               gwr3cpic.c ;
It seems that my laptop cannot establish an RFC connection to the application server. the service file on my laptop has the right entry for the application server.
Any ideas?

Similar Messages

Graphical Layout Editor not Available.

when i login to sE51 and execute the program ZAUTHSCR and press the layout button
I am gettign a message that Graphical Layout Editor not Available.
As a SAP Administrator pls let me knwo what has to be installed for this

Hi,
This seems a SAPGUI problem. Please check if all the development components of your SAPGUI are installed (you can do this by running the sapgui installation again and choosing the add-remove components option. From there you can check which components are installed). I think the graphical painter component has not been installed. Also apply the latest patch for your SAPGUI.
Do let us know if it works.
Regards,
Angad

Re:Graphical layout editor not available

Hi SAP gurus
I am not getting Graphical layout editor when I am running transaction code SE51.It is showing only text editor
please solve this issue its an urgent
Sekhar.k

Hi,
If you are not getting the screen with all the options after pressing the from layout for designing the screen and instead you are getting some damp screen. It can be a problem with the SAP GUI. You need to reinstall it in your system. Cannot help it. Contact your administrator.
Jayant Sahu

Iam not able to get the GUI Graphical Layout editor

Dear Freinds
can any body let me know what are the support package which has to be applied
to get the Graphical layout editor...........when iam trying to select the Graphical layout editor in Screen painter ( it is givin error) .........as the Gui is not being properly installed.
could anyone letme know which patchi have to apply.
regards
vamsi

Dear Vamsi,
You can contact your Basis team. They would need to apply a patch so that you wan view the GUI Layout Editor.
graphical screen painter layout not working
Regards,
Naveen.

ABAP Dump - Graphical Layout Editor

Hi...I get an ABAP Dump when I try to start the Graphical Layout Editor (to modify a screen layout). Here are a few lines from the dump:
&INCLUDE INCL_INSTALLATION_ERROR
What happened?
The current program had to be terminated because of an error when installing the R/3 System. The program had already requested 789763632 bytes from the operating system with 'malloc' when the operating system reported after a further memory request that there was no more memory space available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia to a maximum of 789763632. Then reduce the value by 10.000.000 to be on the safe side.
Then restart the SAP System.

Here's what I know so far:
- I can logon to SAP but can NOT start Graphical Layout Editor from my machine using my user account.
- Other people can logon to SAP but can NOT start Graphical Layout Editor from my machine using their user accounts.
- I can logon to SAP and start Graphical Layout Editor from a DIFFERENT machine using my own user account.
- Other people can logon to SAP and start Graphical Layout Editor from a DIFFERENT machine using their own account.
I have access to more than one SAP systems (different SAP instances) and I have tested the following:
- I can logon to a different SAP system/server (from this same machine) and start the Graphical Layout Editor without error.
- Other people can logon to a different SAP system/server (from this same machine) and start the Graphical Layout Editor without error.
The problem is not likely with low memory on my machine because I have 2 GB RAM whereas these other computers I've tested only have 512 MB or 1 GB memory. I don't see how the problem could be with the SAP server when other people are able to start the Graphical Layout Editor from their machines and even I can start it from their machines. The problem can't be with the SAPGUI files on my machine because I can start the Graphical Layout Editor using a different SAP system/server. I am completely stumped. Any ideas??

I have already done the following:
- Uninstall SAP GUI using the "Add Remove Programs" & reinstall it
- Uninstall SAP GUI using the option provided by SAPGUI setup & reinstall it
- Uninstall SAP GUI using the option provided by SAPGUI setup & rename the folder "C:\Program Files\SAP" then install it again.
- Upgrade from SAPGUI v6.40 to v7.10. I'm now using v7.10
Don't forget that I am able to start the Graphical Layout Editor for a different SAP server using this same SAPGUI from this same computer. I don't think the problem is with SAPGUI but I appreciate your response.

Graphical layout editor for screens

I am using SAP gui 6.40 and have installed patch level 23.
Still i cannot see the graphical layout editor in se51 and only alphanumeric editor is available (the flag for graphical layout editor in utilities> settings is checked).
any hints??
regards,
Priyank

Option 1:
In your computer Go to Start > Run> Type gneux.exe > Click OK>A popup message may come containing the message "EUMFCDLL.DLL is missing."
[Note: gnuex.exe is the responsible executable file which allows the graphical layout editor to run. So copy this particular .dll file from any other computer(in SAP system network) in which module pool is perfectly running. How to copy? Suppose in anyone's computer layout editor is running. Just Go to Start>Search results> search for the dll file EUMFCDLL.DLL. From the search result, from the specific path copy that .dll file and take it as backup on any sharable directory or any storage device.]
Copy that EUMFCDLL.DLL file and put it in your own computer's \SAP\FrontEnd\SAPgui location.
Now again check.
Go to Start>Run>Type gneux.exe>Click on OK. This time any popup window containing error message won't come. But, graphical layout editor will open.
This is just for testing.
Now on SE80 open run layout editor. If it doesn't open properly for the first time, then open & close it for 2-3 times. It'll work.
Same problem occured in my computer. And I put the copy of that particular.dll file in my computer's SAPGUI, it worked.

Graphical Layout Editor

Hi,
I am facing a problem with the Screen Painter Editor. When I am changing from the Module to the Layout, the editor is opening in the old fashion editor, so it is too difficult for me to design a screen, espacially when I have to design a StepLoop, etc. I am checking the settings (Utillities->Settings->ScreenPainter) and the Graphical Layout Editor is activated. I have try to deactivate and activate it again, but the result is the same - nothing.
Have anybody any idea? Thanks in advance.
George

Hi
THis is a BASIS Problem , the GUI is not installed Properly, Contact your BASIS Admin
While installing the GUI they need to select the GUI explicitly which they need to look into at
Hope this serve your purpose
Cheers
Ram

Problem with Screen Painter - Graphical Layout Editor.

Hi Friends,
I have a strange problem with my Graphical Layout Editor. I first had the problem that the alphanumeric Editor gets displayed even the checkbox for Graphical Layout Editor is checked. Then I had gone through sdn forums and found that the eumfcdll.dll was missing.Thanks to sdn forums. When I copied that file into the path specified it worked fine. But the problem is my layout screen is not displayed fully. It is just displayed at the top of the window and only in that region I can drag and drop the elements. Remaining part of the window is uneditable.
what is the problem? Do I need to make any further settings?
Regards,
Raju.

try to re-install GUI patch .
Yeah , its like CNTLALTDEL(restart) , So half of the problems get resolved.
regards
prabhu
Message was edited by: Prabhu Peram

Layout is not available

Hi,
Using SE80 and selecting View, am getting error and also the layout is not available..... I have already updated IE and also installed Designer 7.0, Still am facing the same probelm. Kindly suggest me how to solve this problem.
Message was edited by:
Garima Bajpai

Hi,
make sure you check this link that everything is well configured:
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/e86de5008b4d9ae10000000a155369/content.htm">Help pages</a>
grtz
Koen

Wifi Not Working!!! AMD Graphic Card Drivers Not Available as well!!

Hello Everyone, I bought this HP 15-ac025TX (M9V00PA) Notebook laptop and I am having the same problem that others on this forum with this notebook are having i.e. wifi is not working/available and AMD/Intel Switchable High-Definition (HD) Graphics Driver is not available for download. I saw one solved post regarding this problem but the guy had Windows 7 32 bit and also I couldn't understand much that was discussed in that post. Here is the link to that post: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Network-controller-amp-USB-controller-driver-not-found-and/td-p/5177717 And yes, I have downloaded all the available drivers on the hp site. Help Needed!!

Hi: These wifi and BT drivers should work... Wifi: ftp://ftp.hp.com/pub/softpaq/sp71501-72000/sp71528.exe Bluetooth: This package contains the Broadcom bluetooth driver and software for supported notebook models that are running a supported operating system. Broadcom Bluetooth 4.0 Driver is required to enable Broadcom bluetooth 4.0 devices and is compatible with Broadcom bluetooth 3.0 and earlier versions. File name: sp71440.exe I reported the graphics driver problem to HP a couple of weeks ago. I hope they get that sorted out soon!

N4S: Web Dynpro for ABAP layout editor not working

Have problem in Layout editor in Web Dynpro for ABAP
I have installed NW04S Testdrive on 64bit Linux and able to login.
SE80 is working alright.
Next I create a Web Dynpro Comp. / Intf. and create a component.
I double click on the View name "V_Default" . The Layout editor opens on the right side. Change into Edit Mode.
The "View Elements" panel on the left side of layout editor is missing. This is where we select the various elements like "Textview" etc.
Even the right click on the "ROOTUIELEMENTCONTAINER" to insert elements using context menu does not work.
In summary I am not able to add any element in WD4A Layout screen.
Is there any special plugin required to be installed?
How to solve this problem?

you cannot develope Webdynpro for ABAP using ECC5
This is available with netweaver 2004s (WAS7.0) for which ramp up is going on right now and the general availability is expected sometime around 1st quarter for 2006.
Regards
Raja

Adobe forms layout editor not working

Hello
the layout editor in sfp transaction for adobe forms is not working... it says " could not open layout editor" .
can anyone plz suggest whether anything needs to be installed while installing the gui or any patch would do ...
or atleast where to find the patch ..
thanks in advance !

Hi,
Actually, after a bit more checking I've found SAP note 962763 with more detail.
You do need Adobe LiveCycle Designer and can download the installer from SAP Service
Marketplace:
http://service.sap.com/installations
Entry by Application Group
-> SAP NetWeaver
-> SAP NETWEAVER
-> SAP NETWEAVER 2004S
-> Installation and Upgrade
-> <Choose any OS and DB combination.>
-> Adobe LiveCycle Designer 7.1
Refer the links -
Adobe interactive forms tutorial
adobe forms
Adobe Forms
Regards,
Omkar.

In sapscript Graphical PC Editor not work, not save text

Hello Experts.
In SAPScripts the Graphical PC Editor does not work. Previously if it worked, now will not save or update the inserted text
Is there a note to fix it?
I'm Using:
- SAP GUI 7.20 patch level 5
- SAP ECC 6.0 Release 701
- Windows XP Office 2003
Thanks

Thank you very much.
This post really helped me. I solved it.
Thanks Ángel.
Regards.

Satellite P100: Why the Nvidia 7900 graphic card is not available in UK?

Why is the nvidia 7900 gpu not available in the p100 in UK? In mainland Europe & Middle East the 7900gs is available. The 7900 gtx in the states is available.
Why?

Hi
I dont believe that its not possible to buy a P100 with the Nvidia 7900 graphic card in UK. If you cannot purchase it form the notebook dealer in your city so I would say check the notebook online shops.
I have investigated a little bi and found these P100 units with the nVidia 7900 graphic card.
Satellite P100-426; P100-194; P100-191; P100-196; P100-215; P100-222
I have found three different graphic cards which were delivered with the P100:
NVIDIA GeForce Go 7900; GeForce Go 7600 and Intel 945GM Express
Anyway, the P100 is a new notebook and possibly you cannot buy it in every shop but in my opinion in several times this unit should be available in the UK with the GeForce Go 7900

CFML Editor not available

I installed Flex Builder 2, then downloaded and installed the
CFEclipse plugin, and then restarted FB. I selected File > New
> Other, then chose CFEclipse > CFML Project, and completed
the dialog to create a new project. When I clicked the Finish
button, I got the dialog asking if I wanted to switch to the
CFEclipse perspective, and I clicked Yes. This popped up an error
dialog saying "Problems opening perspective
'org.cfeclipse.cfml.perspective.CFML'"; thus there was no real
perspective, no editor open, although the project was created.
Next I double-clicked on an existing CFC and got this
message: "Unable to create this part due to an internal error.
Reason for the failure: The editor class could not be instantiated.
This usually indicates that the editor's class name was mistyped in
plugin.xml." When I clicked the Destails>> button, I got a
long list of messages beginning with this:
"java.lang.ClassNotFoundException:
org.cfeclipse.cfml.editors.CFMLEditor".
I'm not sure where to turn on this: should this question be
adressed here at Adobe, or does it belong with CFEclipse? Has
anyone else seen this problem, and does anyone know of a fix or
workaround?

I found a work-around. In FB2 when I was finding and
installing updates, I unchecked the Show Only Latest Version
checkbox; that revealed about 6 numbered versions prior to the most
recent. I tried unsuccessfully to install the immediately previous
version; then I went back about 3 more versions and installed that
one, which succeeded - I was able to edit CFML at last.
I have been advised that CFEclipse will always have available
a version with the word "Stable" in its description, and that's the
one that is guaranteed to work. But when I visited their site,
there was no such version, and I just had to keep installing until
I found one that worked.

SAPGUI 710 Graphical Layout Editor not available in LAN

Similar Messages

Maybe you are looking for