Sapgui 710/Vista problem (multiple logon pads open)

Running SAPgui 710 (pl3) on a Vista workstation.
When I open more than 1 SAP logon pad, then select a system from 1 pad, then try to select a system to logon to from the 2nd logon pad, I get the error:
(X) Internal Error: Internal Server Error, no more memory
component DPTM
This does not happen on an XP workstation.
Any suggestions?

We reinstalled sapgui, same problem. We installed sapgui on 2 other vista machines - same problem. Is anybody else running Sapgui 710 patch 3 on a Vista machine, with this problem?
1) open a sap logon pad
2) open a 2nd logon pad
3) from the 1st logon pad select a system, get to the logon prompt, minimize the window
4) from the 2nd logon pad, try to select a system
this is where we get the "internal server error"
Anybody else seen this? Do you have a solution?
Thanks,
Scott

Similar Messages

SAPGUI 7.10 on Windows Vista Problems

Hello everybody, this is my first post. Yesterday,I have installed the released version of SAPGUI on Windows Vista Ultimate with Office 2007 but I have a few problems:
1. Transaction BD87 seems to hang after executing from the selection screen. If I try the transaction and selection on a Windows XP machine using SAPGUI 640 I get a result within seconds.
2. When I try to open Maintain Pricing procedure in customizing sales and distribution the SAPGUI 710 seems to hang as well, same behaviour as above mentioned.
3. When I try to the Spreadsheet button (CtrlShiftF7) from a ALV list display, nothing happens.
I appreciate the help,
Michiel

Hi M,
since SAP GUI 7.10 is still beta, i would expect some problems. Take a look at SAP note 950052 if there is any of your problems listed.
Best regards,
ok

I have a problem, my pc doesnt open itunes windows vista home premium

i have a problem my pc doesnt open itunes , i have windows vista home premium.

Hello jcrivasjc,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario

SAPGui for Windows Multiple Logon with Portal

Hi,
We are using SAPGUI for Windows in Portal in the external window, we are also using it the SAPConsole form the desktop. While using from desktop, the multiple logon (within same client) complains / comes with the pop-up with two standard options.
We would like achieve the same functionality of popup (Restricting multiple logons for the same client) within the portal, any ideas?
I came across certain threads and also notes but none seem to provide a solution....
[Restrict multi logon to R/3 system from portal using single sign on. |Restrict multi logon to R/3 system from portal using sigle sign on.;
[SAP GUI 7.10 and SSO - multiple logons issue. How to restrict it? |/thread/1623980 [original link is broken];
Note 142724 - Prevention of multiple SAPGUI logons
Thank you in advance.
Best regards,
Dharmi
Edited by: Dharmi Tanna on Jun 25, 2010 2:09 PM

Lonny,
The best way to authenticate users when they logon using SAP GUI for Windows, is to use SNC authentication in SAP GUi. Then, the browser iview will launch the GUI and the GUI will authenticate the user using their AD credentials issued during the Windows logon. You will need to setup an SNC library on both the ABAP system which the user is logged onto, and the workstation where SAP GUI is installed.
If you don't use SNC, and you just launch SAP GUI for Windows from browser, then an SSO2 ticket is used to authenticate the user to the ABAP stack, and this is not secure due to the fact that the SAP GUI session which is used to pass the SSO2 ticket is not protected - anybody can intercept the SAP GUI session, take the SSO2 ticket from this traffic and logon as that user - clearly this is bad security and needs SNC to make it secure.
Thanks,
Tim

FF4 problems - bookmark multiple tabs, cursor, open in new tab

What's happened to being able to bookmark multiple tabs - I don't need it often but it's really useful when I do. I can't find it in FF4.
I'm having a problem with my webmail. I used to access the password field with a single click, now I have to click twice before the cursor is active. I run into this problem multiple times a day.
Open link in new tab: in FF4 I keep opening a new window by mistake - it's really annoying. Why was the position of this command changed in the shortcut menu. I use the command many times a day and my brain is too old to adapt easily.
Likewise the refresh button has moved. I use this button countless times a day - it's really annoying to find that I can no longer automatically refresh a page.

The reload button is now on the end of the location bar (where you type web addresses ) by default. It isa stip button whilsta page loads, and a reload button after a page has loaded. There are also options to use completely separate reload and stop buttons, or to add a button to the toolbar that changes between the stop and reload functions.
The changes may be made without adding any extension, the option used to be called customise (in my en-uk) or customize (en-US) and is now available from
* Firefox Button -> Options -> toolbar layout ...
* or by right clicking an empty space on a toolbar
Note the order of the buttons determines whether it displays as a merged button, or as separate stop and reload buttons.

Fonts on logon pad 710 cannot read

Hi,
I have installed GUI 710 and found that fonts cannot be read. How can i can it to english? My pc installed chinese fonts.
Thanks
Wilson

Hi,
You can change the language of your logon pad...
Just click on top left corner ICON ==> Select "Options" ==> Select Language = "EN."
Click on "OK" and exit.
Your language will be change...
Regards.
Rajesh Narkhede

How to block the multiple logons with NWBC?

Hello,
With Sapgui we have the possibility to prevent the multiple dialog logon by profile parameters (login/disable_multi_gui_login).
How to prevent the multiple dialog logon using NWBC to the same system?
Best regards
Frédéric Blaise
e-Kenz S.A.
Luxembourg

Hello,
I opened a ticket at Sap but unfortunately they do not have a solution even if the problem is known.
"Unfortunately, due the HTTP protocol nature, is not possible to force a single logon via web browser. The profile parameter login/disable_multi_gui_login is solely valid for SAPGUI logons."
"Since this case is known since the Web Application Server was created, I am pretty convinced that SAP knows about the fact that multiple logons cannot be blocked (you can only give a warning for the user)."
Since we monitor multiple connections with the SM04 transaction and notify customers that they may be controlled by Sap.
Best regards
Frédéric

Installed SAPGUI 710

I've installed SAPGUI 710 and by default two systems are showing in the logon pad, namely Cairo & Portal, which belongs to California State University, Chico. When I click login SAP login screen appears. My question is from where these SAP servers showing on the logon pad, if it is provided by SAP by default then what is the id & password for these?

Check the System Folder C:\WINDOWS Inside One notepad name as SAPLOGON. It contains the SAP Logon pad entry details.
If you delete or modify the file it will reflect to SAP Logon.
Problem was may it not updated when you install SAPGUI 710 or Folder contains previous SAP user logon information.

? to Customize Sap GUI Logon Pad

Hello all,
How can i customize Sapgui logon pad with own Logo instead of Default Logo.
Thanks in advanace,
Rahul

Hi Markus When we click on Logon Pad SapGUI 710
On the System Tab right hand side we have Viriable logon
below to that We had a Logo Indicating Orange & Blue arrow
How can i change to my own Logo.
Cheers,
Rahul

Multiple reviewers cannot open CREV files in Adobe Captivate Reviewer 1.0 after the first review

We are using Captivate 4.0 with Captivate Reviewer 1.0 for review and comments. The problem we are having just started within the last month...
We place the CREV file and folder on the network so that multiple reviewers can access. All have Adobe Captivate Reviewer 1.0 installed.
When the first person opens the CREV file, they are told that the folder is already in use, and that they must create another.
Once a new folder is created a user may open the CREV file and make comments and save them. However, subsequent reviewers cannot open the CREV file to add their comments. Subsequent reviewes must create anothe folder and then they can open and review the file and add comments.
However, because the CREV file is now saving comments in a different folder, reviewers cannot see each others comments. The last module we did where everthing worked correctly and multiple reviewers could open and comment the same file without any issues was about one month ago on 07/29. We have no idea if something has changed since then that would render Captivate Reviewer 1.0 inoperable, but we'd like to see if anyone else has seen and/or resolved this issue...
Thanks,
James

No, I've had WIndows 7 since it was released through MSDN. Adobe Captivate 4, released in January 2009, was the most recent version of Captivate available when Windows 7 was released to MSDN and Technet subscribers in August 2009. Captivate 5 was not released until May 2010, almost 9 months after Windows 7 was released to the public.
Captivate 4 has a message at startup mentioning that one should run it as administrator, which is a Windows 7 feature involving User Account Control. We bought it sometime after Windows 7 was released but before Captivate 5 was released, otherwise we would have bought Captivate 5.
Captivate 4 has worked for us on Windows Server 2008, Windows 7, Windows Vista, and Windows XP. For it to work on Windows Vista and up, we had to make sure a particular update was applied.
The problem is that it works when it feels like it, and the rest of the time it just freezes at startup. Deleting the app data folder seemed to help, so perhaps it had issues with state corruption. These issues have plagued this application from day 1 on every OS we've used it on.

SAPGUI 710 + BW3.x run-time error

Hi all,
I'm having a problem that is driving me completely crazy. I have a combination of systems available (Windows XP or Vista and Office 2003 or 2007) and they are all causing the same error for me.
As I write this I am using Windows Vista with SAPGUI 710 and office 2003, however as mentioned before the same error occurs with SAPGUI 710 and XP for me (different machines)
I have installed 710 with all the options from the files:
50083078_2
50083078_4
50083078_5
As instructed from the distribution center. I then installed support package 1 (gui710_1-10002995).
When I run BEx Analyzer 3.x, create a new query, and try to restrict a characteristic using a variable (in this case a selection option) as i drag the variable from the available list to the selection i get several of these messages:
Run-time error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients.
Followed by:
Run-time error '440':
Automation error
Searches for these have yield me no results for 710 in combination with Vista or XP.
Thanks in advance.
Dez

Vidya,
Goto http;//service.sap.com click on SAP Support Portal, you are going to need an 'S' number to login. Once you have logged in goto 'Help & Support', 'Search for SAP Notes' and in the top right where it says 'Number' enter the note number.
Cheers,
Dez

Install SAPgui 710 on Windows 2000 SP4

Hi,
I try to install SAPgui 710 on Windows 2000 SP4. But when i launch SetupAll.exe, window "SAPgui install master" does not appear.
Although, Install SAPgui 640 on Windows 2000 SP4 is success.

Hello Sergey
please be sure that the INTERNET EXPLORER 6 is installed on the W2k Clients!
If not, then the new NWSapsetup can not start!
Many of my messages in the OSS with same error description had under W2k the problem that the IE there was not in version 6.
If you can not solve this problem by yourself, please open a message in "OSS" under BC-FES-INS !
Best Regards
Sven

A lot of memory is used when multiple tabs are open

Is there anything that can be done about the insane memory usage in Firefox when multiple tabs are open? I often have 20+ tabs open and the amount of RAM that Firefox uses when I have it open with this many tabs is just ridiculous. As an example of this, I just restarted Firefox after checking the Windows Task Manager. The Task manager said that Firefox was using 1.2 GB of RAM. I did have 32 tabs open, but this seems excessive even for this many tabs. Some of the tabs were image heavy, but none of them had any video in them. I'd think 10 MB per tab of RAM would be plenty to cover these kinds of pages, maybe 20 MB at most. The upper end of that range would be 640 MB of RAM. Instead, it appears to be using an average of 40 MB of RAM per page when this many tabs are open.
Is there anything that can be done to reduce amount of memory being used when multiple tabs are open? It really shouldn't need this much RAM to serve this many pages.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Remote Desktop Gateway and WebAccess Deployment - Multiple Logon Prompts

I'm having a few issues with some multiple logon prompts using "Connect to a remote PC" via RD Web Access.
I am able to log onto the RDWeb without a problem.
Essentially once I make a connection to my end-device I first receive a logon prompt, I'm authenticated, then I'm asked again for another logon prompt. Any ideas how to resolve this?
My layout is simple:
1 VM in the DMZ that has the Remote Desktop Gateway and Remote Desktop Web Access roles installed. No connection broker, or session host.
With my deployment I have a wildcard certificate bound to the Remote Desktop Gateway and it is bound properly in IIS. Remote Desktop functionality through the RDGateway works just fine. However, the only nuisance is that I get prompted multiple times for
credentials when accessing the end-device regardless if my connection is from a domain-joined machine or a non-domain joined machine.
I've tried using Web Single Sign On via http://anandthearchitect.com/2014/01/20/rds-2012-r2single-sign-on-using-windows-authentication-for-rdweb-page/ and it still does not work.
Any ideas?
Thanks,
Dan

Hi Dan,
How many prompts are you seeing? Expected behavior for Connect to a remote PC would be this:
1. Log on to RDWeb
2. Select Connect to a remote PC tab
3. Enter server name in Connect to box, click Connect
4. Unknown publisher warning, click Connect
5. Credentials prompt, it should say These credentials will be used to connect to the following computers: 1. rdgw.domain.com (RD Gateway server) 2. remote.domain.com (remote computer)
6. After entering credentials and clicking OK it should log you in to the remote computer. This assumes that the destination is authenticated properly (usually via certificate) and the credentials are valid for both the RDG and the remote
computer. Normally in a domain environment the same credentials (domain\username) would be valid for the RDG and the remote server.
-TP

SAPGUI 710 Graphical Layout Editor not available in LAN

Hi,
I recently installed sneakpreview NW04s for ABAP at home and the SAPGUI 710 software. The graphical layout editor doesn't work. I have checked all requirements such as, required dll and exe files. They are all available. The problem occurs only when I try to start the graphical editor from another pc in my LAN. If I start it on the application server where I have installed NW04s and the SAPGUI, it works fine. Only when I access to the application server from other pc in my home network, it fails to start the graphical editor. I've read that there must be a problem with firewall / port somewhere. I don't know where I can check whether this is the cause. I am using D-Link wireless for my home network.
Can anybody help me with this?
Thanks in advance,
Shahram

I tried SM59 and ran a connection test for EU_SCRP_WN32. It started gnetx.exe, the window appeared shortly. But, the connection failed with the following error message:
ERROR                timeout during allocate
LOCATION             SAP-Gateway on host OFFICE / sapgw00
DETAIL               no connect of TP gnetx.exe from host %%SAPGUI%%
COMPONENT            SAP-Gateway
COUNTER              5824
MODULE               gwr3cpic.c ;
It seems that my laptop cannot establish an RFC connection to the application server. the service file on my laptop has the right entry for the application server.
Any ideas?

Sapgui 710/Vista problem (multiple logon pads open)

Similar Messages

Maybe you are looking for