SAPGUI for windowes does not startup in Portals - Help

Hi all,
I am trying to run a transaction (PA20) using the SAP Application in Portal under System Administration--> Support. The system and alias are set up and working. The error message I get is a popup:
Do you want to open on save this file
tx.ssd
Type: SAP login Application
From: sapptdapp1
this prompts to save, open or cancel
I have tried other transactions and the result is the same.
Thanks, Neeta

Hi Neeta,
What SAP GUI type you are using Wingui/Web gui/JAVA gui.
Usually you get this kind of situation when you dont have a wingui installed in your system or in the system where portal is being browsed.
Solution is install win gui in the system or If you have ITS installed then you can use WEBUI or if you want to use JAVA GUI refer to my weblog
Steps for quick installation and usage of SAP GUI for JAVA in EP
Hope this helps,
Thanks,
Praveen
PS.Dont forget to reward points

Similar Messages

Windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

Hi Tamekia,
I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
Level-three uninstall, and register the Windows Installer Service
Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Cant Charge/connect ipod touch. Get an error saying "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" . HELP.

Ok . so my ipod touch 2G , used to be all ok . its just yesterday i went to charge my ipod it wouldnt do anything . Then after being plugged in for a bit , i got pop up saying " "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" .
Ive tried plugging this into 3 other computers same error message pops up .
PLEASE help me . thanks (:

Uninstall your USB drivers in your computer & reinstall.
contact your pc manufacturer for the steps.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Apple software update for windows does not work properly

Apple software update does not work properly

I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

New safari update (5.1.2) for windows does not load any webpage. i can open safari but nothing happens.

why wont it load?

Try this:
Bring up the Windows Task Manager.
Look for a process called: "WebKit2WebProcess.exe" and there may be a *32 after the name.
Now Look for a "Safari" process, there may be multiple instances, but the primary instance will be identified by the significantly more memory that it uses.
Kill both processes.
The Kill order may be important.
If the WebKit process is running alone kill that first, and try to relaunch Safari.
If a Safari process(s) is running, Kill the primary instance, The WebKit process should also go away but if not Kill WebKit too.
It may take more that one launch attempt to clear the memory.
Further,, you will likely have to do this at each Safari launch because these processes become unstable after short use - until Apple fixes this bug.
-Alan
Ps: I have no issues what so ever on Lion, just Windows 7

ITunes for Windows does not delete podcasts when told to.

I have 30 podcasts. When I try to delete a selected podcast using either the delete key or right-click menu, I then tell iTunes to "move to recycle bin". However, many times the file remains. I just found >1GB of left over podcasts that did not show up in iTunes but are in the "My Music\iTunes\podcast.." directories.
is this a known bug or am I missing something?
Is there anyway to fix this?
Shane

In order to delete the podcast, start playing another track first. Sounds like the same bug that affects TV shows. The currently selected show will not go to the recycle bin, though it will disappear from the iTunes library. It's as if iTunes tries to move the file to the RB but Windows says, "No, that file is in use."
I discovered this bug after my laptop hard drive ran out of room because none of the TiVo2Go shows I'd been watching for weeks had truly been deleted by iTunes when I asked it to. All the files remained on the hard drive.

Windows does not startup

For some reason when i start my notebook windows 7 computer up after it shows the windows logo it goes to a balck screen with the white mouse. How would i fix this? i have already tried a windows start up repair and works but after i restart it the same thing happens. What may be the problem

Hi,
Shut down the notebook. Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Firefox update 8 for windows does not recognise me as an administrator. Windows 7 home control panel shows i am an administrator. What gives and how can i make the update?

hardware: Lenovo G56 laptop
OS Windows 7 Home
usual logon is using Veriface, but that executes my password.
The upgrade window asks to choose between two profiles:
one is mine, where username and password are pre-filled and greyed out, the other is called Administrator, with no password. If I insert my password in this field it saya 'no such account' and if Is elect my own logon (I am the only user btw!) it says I do not have sufficient privileges!
I am going to create a second user, also an Administrator, and see if that might overcome this issue...

If there are problems with updating then best is to download the full version and uninstall the currently installed version and delete the Firefox program folder to remove any leftover files.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup

Print Preview in Safari for Windows does not display Flash object

I have a web page with images, text and a flash movie in several divs. I can see all the objects on the page but when I print preview the flash object is not displayed. The same problem occurs in Firefox 3 but not in IE6/7 or Opera9.5
Any clues/help would be greatly appreciated.

Click Help -> Report Bugs to Apple.
I'm hoping they fix it.

Safari for Windows is NOT compatible with Unicode 3.1 CJK characters!

This is an "old" problem since Safari for Windows was initially released. In the meantime, the problem is still not fixed in the latest version 4.0.3 (531.9.1).
Not only Safari (for Windows) does not properly show homepages that contain Unicode 3.1 CJK characters, but it also fails to show Unicode 3.1 CJK characters (it shows "squares" instead) in the whole application, such as Search box and all dialog boxes. Will this be fixed in the next release?
By the way, it is strange that Safari 4 for Mac is Unicode 3.1 compatible.

To speak more precisely, the Safari for Windows doesn't support CJK characters of Unicode CJK Unified Ideographs Extension B.
The following test illustrates the incompatibility of Safari for Windows:
1. Sample text displayed in Firefox 3.0.2 on Fedora 9.
http://farm4.static.flickr.com/3020/3002743180_e026d5c84b.jpg
2. Sample text displayed in Safari 3.x/4.x on Windows XP with "MingLiu Ext-B" (an Ext-B font provided by Microsoft) installed.
http://farm4.static.flickr.com/3224/2971019999_1c113109a9.jpg

The Help Tab (OSX ML) where you search for something does not work

If I click "Help" and then search "expand" it will show me where expand is. But in CS6 when I clicked it the command would go through and pull up the page to expand pixels. Instead, I have to go find it. It works in every other Adobe app I use except Photoshop CC.
I am on the latest version and on CC

Hi Peter
Thanks a lot for your help (and sorry for not having answered quicker, but my boss gave me a more urgent task last week...).
Anyway, I did what you suggested (re-importing into a brand new project), and then the search for synonyms really worked! But, being a sceptical person, I did the same with another project, and with that one, it did not work. So, what I did next was compare all the settings of these two projects, and I found a difference.
RH8 now contains a function that's called 'Teilzeichenfolgensuche' (I don't know the English expression, but have a look at the attached picture: this is a screen shot from the second page when I generate WebHelp). After having done several tests, I came to the following conclusions:
Search for synonyms does not work in HTML-Help, but it does work in WebHelp (and maybe others, but they are not relevant for me, so I did not test them);
Search for synonyms does only work, when the function 'Teilzeichenfolgensuche' is NOT activated.
Could maybe somebody test this, too, and post here whether my conclusions are really correct?
Btw: This fact is not mentioned in the RH-Manual; actually, this function 'Teilzeichenfolgensuche' is not even mentioned there (at least not in the German edition)!!!
Can hardly wait to see your feedback; thanks again for everybody's support!
Kurt

SAPGui for Windows Multiple Logon with Portal

Hi,
We are using SAPGUI for Windows in Portal in the external window, we are also using it the SAPConsole form the desktop. While using from desktop, the multiple logon (within same client) complains / comes with the pop-up with two standard options.
We would like achieve the same functionality of popup (Restricting multiple logons for the same client) within the portal, any ideas?
I came across certain threads and also notes but none seem to provide a solution....
[Restrict multi logon to R/3 system from portal using single sign on. |Restrict multi logon to R/3 system from portal using sigle sign on.;
[SAP GUI 7.10 and SSO - multiple logons issue. How to restrict it? |/thread/1623980 [original link is broken];
Note 142724 - Prevention of multiple SAPGUI logons
Thank you in advance.
Best regards,
Dharmi
Edited by: Dharmi Tanna on Jun 25, 2010 2:09 PM

Lonny,
The best way to authenticate users when they logon using SAP GUI for Windows, is to use SNC authentication in SAP GUi. Then, the browser iview will launch the GUI and the GUI will authenticate the user using their AD credentials issued during the Windows logon. You will need to setup an SNC library on both the ABAP system which the user is logged onto, and the workstation where SAP GUI is installed.
If you don't use SNC, and you just launch SAP GUI for Windows from browser, then an SSO2 ticket is used to authenticate the user to the ABAP stack, and this is not secure due to the fact that the SAP GUI session which is used to pass the SSO2 ticket is not protected - anybody can intercept the SAP GUI session, take the SSO2 ticket from this traffic and logon as that user - clearly this is bad security and needs SNC to make it secure.
Thanks,
Tim

SAPGUI for Windows via Portal - problem with frame

We are launching SAPGUI for Windows via Portal to drive single sign-on via AD. Our problem is that when SAPGUI launches, it is contained within an IE browser frame that causes some of the SAPGUI screens to not fit on the screen well. Those same screens fit just fine if we launch SAPGUI directly.
Is there any way to launch SAPGUI from Portal, with SSO enabled, but without the IE frame around it?

Lonny,
The best way to authenticate users when they logon using SAP GUI for Windows, is to use SNC authentication in SAP GUi. Then, the browser iview will launch the GUI and the GUI will authenticate the user using their AD credentials issued during the Windows logon. You will need to setup an SNC library on both the ABAP system which the user is logged onto, and the workstation where SAP GUI is installed.
If you don't use SNC, and you just launch SAP GUI for Windows from browser, then an SSO2 ticket is used to authenticate the user to the ABAP stack, and this is not secure due to the fact that the SAP GUI session which is used to pass the SSO2 ticket is not protected - anybody can intercept the SAP GUI session, take the SSO2 ticket from this traffic and logon as that user - clearly this is bad security and needs SNC to make it secure.
Thanks,
Tim

FaceTime window does not appear after startup

After I startup FaceTime, the window for it does not appear, but the toolbar is available.
The options under 'Edit' and 'Video' are all greyed out, but the options under the 'FaceTime' tab are all available.
However, when I try to access 'Preferences' for FaceTime, a black screen appears. When I press the red button to close the Preferences window, FaceTime will automatically quit.
Help please!

Firefox does not have a run for .exe which is a good thing for security and common sense reasons.
After you download Firefox you go to where you save the file and run it.

One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.

I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
Windows 7 and iPad 2
Kind regards,

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

SAPGUI for windowes does not startup in Portals - Help

Similar Messages

Maybe you are looking for