SAPGUI Remote Installation - Request to SAP for version 7.10
Hello
I've been using SAPGUI Installation Server for some time and was quite pleased with the functionality it provided in version 6.4 that made it possible to push the installation to users. However in a new version (7.10) this feature was removed. Although it is possible to run a remote command using new version you have to know the password of a local administrator on the PC. In version 6.4 no password was necessary to push out the installation.
I believe it is in our, system administrators, best interest to push SAP to restore that functionality.
Please share your opinion in this thread. Maybe SAP would make it possible again, once they see it is desired and needed by users.
Paweł Kryczkowski
Hello Pawel
"I believe it is in our, system administrators, best interest to push SAP to restore that functionality."
That is not necessary.... because you can use the NWsapsetupadmin.exe ->
Remote -> Execute Process Remotely
Please also read the documentation in your Installation server -> NWsapsetupadmin.exe -> press F1 -> Administering an Installation Server -> Controlling Remote Workstations
Thats All
Best regards, Sven
Similar Messages
-
Installation Failed on Mac for version 11.7
I tried to upgrade to latest version... should have left well enough alone. Flash Player version 11.6 worked just fine. Now I've done a complete uninstall, tried all troubleshooting suggestions on Adobe site, did restarts after each attempt... all with the same results: "Installation failed" error after 7%-13% of installation. I've even tried to reinstall older version, but cannot unzip file to installable format. If I can locate 11.6 that is not archived, I'll just use that one. I've spent the last couple of hours with this and am totally frustrated. I am on a Mac OS X 10.6.8, 2.16 GHz Intel Core 2 Duo, 64 bit.... I need HELP!!!
Hello,
Welcome to Adobe Support
You can uninstall Flash Player completly first. (Flash Player uninstaller : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html)
You can download Adobe Flash Player 11.7 offline installer from here : http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
Thanks,
Vikram -
Remote installation option for SAPsetup installation server removed.
Hi all,
I have been using SAPsetup Installation Server for distributing SAPGUI 6.4. Many options with this version, remote installation and Load Balancing to name a couple right within SAPADMIN. I have put the latest version 7.10 on a test server and those options are no longer available. Also I don't even see and upgrade option, am I missing something? Is it possible to use the old installation server to push out the new SAPGUI, if so how?
Thanks,
JeffHello Jeff,
the installation software for SAPGUI 7.10is completely new and you can't distribute a SAPGUI 7.10 with an Installation Serrver installed with the SAPGUI 6.40 CD.
Regards, Martin -
SAP Installation Server & GUI 7.10 Remote Installation
Hello!
We have installed an SAP Installation Server (8.1.0.104) with SAP GUI 7.10 (Patch 9) and created a package for SAP GUI. On our old installation server there was a "remote installation" button, but here on the new version, we cannot see it. Have there been some significant changes?
Thanks for helpful answers!I had basically the same question about remote installing the gui. Here is a response from OSS about it.
I am sorry but we do not provide a Client Push Installation mechanism.
but only a method to pull a package from an installation server.
Using for instance
<SERVER>\<***>\sapsetup /update /silent
for a pull scenario.
As stated in note 507996, tool like SMS can be used but you you use
the [nw]Sapsetup option
thanx
PM1K -
Incorrect Transport Requests : SAP delivery version getting collected
Hi,
In our development system, when we try to include objects in a transport request, the entries in the transport request are getting saved as the SAP Delivery version rather than the active version.
For example an ODS ( z object, newly created in development environment) entry is being logged as R3TR DODS XXXX (Obj name) rather than R3TR ODSO XXXX.This is happening for all object types ( Info objects, cubes, workbooks etc).
Also while collecting workbooks in transport request ( using transport connection) we got the following error -Logical transport object 414Q not found in table RSTLOGOPROP. Not sure if the above two issues are interlinked.
Appreciate your help on this.
Kind Regards,
BansiHi KxD,
I don't expect the loading date to be equal to the delivery date but I expect it to be 2 days before the delivery date since the time specified on the route is 2 days. So I would expect my loading date = delivery date - 2 days (route time)
The way system is acting is loading date = committed date + 2 days (route time).
FYI.. when you turn on route scheduling the delivery creation date is based off of your route time and not your planned delivery time from the material master
Thanks,
Imran -
SAP DEMO Database for SAP b1 Version for HANA
I was wondering if anyone can Help. I have installed the SBODEMO database on SAP B1 version for SAP Hana. V9.0 PL4 and then upgraded to PL9HF (901.00 to 902.001) the SBOCOMMON upgraded ok but SBODEMO database failed on the pre upgrade checks with "Parameter type error in stored procedure SBO_SP_TranasctionNotification and refers to Note 134078. I logged it with SAP and they have said uninstall the SBO DEMO database and then reinstall. Can anybody provide details on how to do this as there are no uninstaller just for the DEMO db as it was installed during the SAP B1 server installation.
Hi Nathan,
You can uninstall using uninstall.bin typically located in /opt/sap/SAPBusinessOne. If you deleted /opt/sap/SAPBusinessOne or the uninstall fails you can use the command shown below.
//Check for B1 rpm files
rpm -q -a | grep B1
//remove B1 rpm files
rpm -q -a | grep B1 | xargs rpm -e
After uninstalling I would recommend deleting the directory (rm -rf /opt/sap/SAPBusinessOne).
Best regards,
Duncan -
SAP Trial version installation/Licensing
Hello there,
I have installed trial version of SAP on my laptop computer and sent the information to SAP at www.sap.com/minisap for extending the license. But I have received very long key back from [email protected] It believe it has to be 24 charaters.
Has anyone seen this problem?
Thanks,
ManojHi,
Just don't change anything, first save that file in your desktop as a notepad. And
To get an SAP License you have to complete the
following steps:
1) Find out the machine on which the SAP message server is running.
2) Get your hardware key by running "saplicense -get"
on the machine where the SAP message server is running.
3) Logon to SAPnet and send a license request to SAP.
4) On receipt of your license key from SAP, install it
using "saplicense -install".
As a more convenient way to install the license please
use the transaction SLIC in the SAP system.
And
Refer also,
license renewal procedure please
Note: Points always encourage me to reply!! -
when i download iTunes during downloading process on messege shown:
An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.4053”.type=”win32”.publicKeyToken=”1fc8b9a1e18e3b”.proce ssorArchitecture=”x86”’.Please refer to helpSuppport for more information. HRESULT:0x8007054F
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes. i don't have mcafee security. i have zonealarm security.
please guide me for download itunes in my pc.Did you read threads "more like this" on the right side?
Yes there are issues and tips on resolving install errors. -
Installation error message for Oracle Database software for version 10g
Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
Below is the 12 steps that I go through, please advise what I'm doing wrong : -
1. (Operations) default is Create a database
2. (Database templetes) default is general purpose
3. (Database Identification) projemp.local for Global database name & projemp for SID
4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
11. (Database storage) no options available
12. (Creation options) the options button has been selected for "Create Database"
Click finish
I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
Regards
Phil855880 wrote:
I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
>
I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
>
I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
>
Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Ok, that link takes us to the download page, which does not shed any light at all on your problems
I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
Hope this is some help.And
I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
How do I find out if I'm part of an Administrator, ORA_DBA group ?
Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course? -
Crystal Report Dynamic Parameter for SAP B1 version 8.8
Hi, does anyone have problem with the dynamic parameter prompt for Crystal Report in SAP B1 version 8.8?
For example:
1. For static parameter that allows multiple value --> In SAP B1 v8.8, there is a check-box and a "..." button next to it. When you click the "..." button, a new window appear with a list of values to choose.
2. For static parameter that does not allow multiple value --> In SAP B1 v8.8, there is one field with a drop-down menu.
3. For dynamic parameter that allows multiple value and does not allow range values --> In SAP B1 v8.8, just one field for us to key in the value. Shouldn't this be the same as No. 1?
4. For dynamic parameter that does not allow multiple value and does not allow range values --> In SAP B1 v8.8, same as No.3 above. Shouldn't this be the same as No. 2?
How do I get no. 3 dynamic parameter that allows multiple value and does not allow range values to have a check-box and a "..." button next to it to allow us to select multiple values?Hi Shwu Hua Gan,
Thank you for your reply.
Please forgive me as I don't really understand what you are saying here. To be honest, I'm very new to Crystal Report and my understanding of CR is just the very basics. I'm actually not from a technical background which makes it more difficult.
In your reply:
Ie, you create a parameter in Crystal report, and by using the token eg:Mytest@select * from OCRD, it gives you the benefits of selecting the list from the database.
How do you do this by using the token? All I did is just select the parameter type (dynamic) and then select the table. When I preview the report in SAP B1 8.8, it doesn't prompt me like how I expect it to be. It is a blank field that I have to key in the value myself and then only the report will generate. Sometimes I don't remember what value to key in, so I have to do a formatted search for the blank field. After the report is generated, I can reselect the value (multiple values) from the CR viewer panel toolbar and refresh the report. -
Hi, could you please tell me if I can install any SAP trial version for MAC OS?
Hi, could you please tell me if I can install any SAP trial version for MAC OS? I am newer on this
Hello Cielo,
You can install or use SAP free trial using VM machine
Windows for Mac Desktop Virtualization - Try Fusion Free: VMware Fusion | VMware India
And you can download prepacked /pre installed sap machine from SDN
http://sdnweb.sdn.sap.com/sapbackoffice/public/SAPStoreSolutions.aspx
I am using SAP application server using VM machine->Fusion6 and prepacked trial version.
Thanks !
With regards,
Amit -
Until when give SAP support for version 7.30?
Hello,
Until when give SAP support for version 7.30?
How is the update from SAP GUI 7.30 to 7.40 handle?Hello Herr Jürs,
As per the attached note http://service.sap.com/sap/support/notes/147519
support ends in July
SAP GUI for Windows Support Deadlines
7.30: Full support up to July 15th, 2015. On July 15th, 2015 the used development environment Microsoft Visual Studio 2010 will transit to Microsoft's "Extended Maintenance" mode. This means that Microsoft will not create any corrections for components which belong to this development environment anymore (unless the issue is security relevant). Therefore no extension of full support for SAP GUI for Windows 7.30 beyond this date is possible.
Regards,
Jude -
Remote support platform 2.3. for SAP Business One
Hallo,
Am 29.11.2010 wurde die volle Verfügbarkeit der remote support platform 2.3. for SAP Business One (RSP) auf dem Service Market Place veröffentlicht.
Hier in Kürze die Neuerungen:
u2022 Möglichkeit des Hochladens einer Datenbank zum SAP Business One Produkt Support. Damit verbunden ist eine schnellere
Lösungsfindung für ein geschildertes (Fehl)verhalten von SAP Business One
u2022 Eingebauter automatischer Updatemechanismus für RSP u2013 kein zusätzlicher Konfigurations oder Wartungsaufwand nach
einem PL Update der RSP mehr erforderlich
u2022 Möglichkeit esines automatisierten Transfers von SAP Business One Patches direkt zum Kundenserver.
u2022 RSP unterstützt nun auch SSL und STAR TLS für das versenden von Emails, somit können u.a. Googlemail, Hotmail oder
andere bekannte Email Server zum Versenden der Emails benutzt werden
u2022 Das überarbeitete Berichtslayout ermöglicht auf einfache Art und Weise zu erkennen welche Punkte des Berichts Beachtung
verdienen. Auch werden im Vergleich zum zuletzt erstellten Bericht, geänderte Werte in Blau dargestellt
u2022 Möglichkeit mehrere SAP Systemnummern (von Kunden) und Systemtypen (Produktiv-DB, Test-DB, Entwicklungs-DB) auf nur
einer SQL Serverinstanz
u2022 Neue Programwizards für bessere Interaktion der Benutzer mit RSP
u2022 verbesserte E-mail Notifikationen
u2022 und einiges mehr ...
Wir möchten SAP Partner einladen unsere Produktseite zu besuchen um mehr über RSP zu erfahren. Für SAP Kunden ist die Seite leider nicht erreichbar, jedoch ist auch im Kundenportal eine entsprechende Informationsmöglichkeit vorgesehen.
Wie möchten Sie ebenfalls ermutigen, uns Ihr Feedback, Ihre Eindrücke, Ihre Ideen und Anregungen uns für das nächste Release der RSP mitzuteilen.
Mit freundlichen Grüßen
Mario SchönbergKevin, 你好。请问我应该如何去下载到这个软件呢。我有一张SBO2007的实施顾问的证书,登录的后,无法可以看到其他的path,但是无法下载RSP。
-
Difference/Updation to SAP-BW Versions 3.0B,3.1C and 3.5
hello guys
can anyone breif up with the difference/Updation to SAP-BW Versions 3.0B,3.1C and 3.5?
Pl let me know atleast few of points?
Many Thanks
balajihi Balaji,
3.1 c
SAP BW Release 3.1 Content - What' s new?
SAP provides a comprehensive set of business analytics to integrate and analyze process-oriented content from a variety of sources and across various applications and industries. It enables companies to improve business processes and quickly respond to changing market dynamics by providing business information to executives, analysts and information consumers, delivered in real-time via the Web.
SAP BW's analytical foundation and wide-range of Business Content enables customers to create their own analytical applications that best fit their business requirements.
Business Content and Business Analytics
Business Content for Oracle Applications
Standard Business Content for Oracle Applications 11i was delivered with BW 3.0B covering the Financials and Project Accounting areas. To enhance the value of these existing analytical applications, including Web cockpits for cost center and project monitoring, we provide predefined extractors to load the business data from the Oracle Applications source system into SAP BW.
The integration of Oracle Applications into SAP BW is based on the new Oracle extract package of Ascential's DataStage product. Business data from Oracle Applications is extracted into the InfoCubes for the Oracle General ledger and for Oracle Project Accounting that were delivered with BW 3.0B. For more information please click here and also here.
Analytics Supporting The Concept of Business Activity Monitoring (BAM)
BAM is a Gartner term that defines the concept of providing real-time access to critical business performance indicators in order to improve the speed and effectiveness of business operations. As business transactions are increasingly automated, the speed of these transactions accelerates. SAP BW delivers packaged analytics, for example in the SCM area, that combine application and data integration using SCEM (Supply Chain Event Management).
SCEM enables companies to monitor processes immediately and in great detail. This means that they are able to recognize and react to critical situations quickly, before they result in delayed deliveries and production standstills. In many cases, event information is essential not only during the processes, but also after completion, because it can be used both for measuring quality aspects and for cost saving. For this reason, it is advisable to integrate the Supply Chain Event Manager with SAP Business Information Warehouse (SAP BW).
Business Analytics - SAP's Packaged Analytical Applications per Business Area / Industry
Analytical applications measure and improve business processes across a company's entire value chain. Based on a solid foundation (Data Warehousing, BI Platform and BI Suite of tools), SAP BW provides integrated applications that understand each other's metadata, and offer a closed loop that incorporates all aspects: Operations, analytics, and personalization.
SAP BW 3.1 Content delivers analytics for all business areas such as CRM, SCM, SRM, HR, etc. as well as for different industries, such as Retail, Banking, and Service Providers to name a few.
bw 3.5
What's new?
SAP BW 3.5 is designed to deliver seamless integration capabilities into all of the SAP NetWeaver components, as well as offering new capabilities in the Business Intelligence platform and suite.
Information Broadcasting via Business Explorer (BEx) Broadcaster
Check out the Demo to learn more about the possibilities Information Broadcasting offers:
Share and disseminate insights to support decision-making processes
Access the complete BI information portfolio via the SAP Enterprise Portal (SAP EP 6.0)
Single, web-based wizard to broadcast personalized BI information portfolios to various end-users (pre-calculated for optimized query response time)
Leverages SAP NetWeaver Knowledge Management features such as subscription, feedback, discussion, collaboration, rating, enterprise search, etc.
Offers broadcasting services such as different scheduling options (ad-hoc, based on data loads, time scheduling), pre-calculation of queries and workbooks, sending pre-calculated queries and web templates as email attachments
Based on the Java Repository Manager, all SAP BW metadata, master data, and transactional documents, as well as pre-calculated queries/templates for KM Services are enabled.
Universal Data Integration
The new Universal Data Integration significantly extends SAP BW data access capabilities to diverse data sources.
BI Java Connectors
Several hundred of connectors provide access to all data sources that support JDBC, XMLA, OLE DB for OLAP and SAP Query
UDConnect (Universal Data Connect)
Out-of-the-box connectivity for additional data sources that can be accessed by the BI Java Connectors. UDConnect supports staging and remote scenarios to this data.
For instance, extraction from /remote access to a relational database via JDBC or extraction from /remote access to an OLAP source using OLE DB for OLAP, and extraction from an OLAP source using XML for Analysis.
BI Java Software Development Kit (BI Java SDK) for custom-built Java Applications accessing SAP BW or non-SAP BW data via the BI Java Connectors.
Easy to use and learn
Based on open and accepted standards for interoperability
Embedded BI - Integration into SAP NetWeaver
Web Application Server:
Integration with new Internet Graphics Server (IGS) and WAS Alert Framework
Connecting BI alert framework to the SAP NetWeaver alert repository to streamline alert message processing
Platform independence for graphical rendering (charts, maps), improved usability and new chart designer in BEx Web Application DesignerInbound Message Processing
Integration with SAP Exchange Infrastructure (SAP XI) to support real-time data acquisition
The data warehouse and/or operational data store is simply another subscriber to the real-time data being distributed by the Integration Broker
Data is active, event-driven that's available to the Business Intelligence system in "real time"
Reporting on harmonized master data:
Integration with SAP Master Data Management (MDM) helps to improve the quality of decisions made
Create consolidated views on customers, vendors and products
Enhance master data with global attributes for company-wide analysis (i.e. spend analysis)
BI Web Services:
> The following BI web services can be accessed via open standards
XML Data Load, XML for Analysis, XML Query Result Set
Leveraging the Web Application Server 6.40 technology infrastructure
Seamless deployment of BI web applications:
into SAP Enterprise Portal roles for instant information delivery
into SAP Enterprise Portal collaboration rooms
into SAP Enterprise Portal KM folders
Allows to search through BI applications in the context of unstructured information
Gains improved query response times through cached application retrieval
BI Platform Enhancements
BI Web Services for data acquisition, reporting, and analyisis (XMLA) and BW Query XML Result Sets as Web Services (enable output of BW Query into XML for further processing)
The Analysis Process Designer is a graphical tool for modelling multilevel analyses processes. This includes dataselection, preparation (e.g. filtering, sorting...) and transformation (e.g. data mining, regression, ...)of selected data with storage capabilities.
Planning and Simulation (BW-BPS)
With release SAP BW 3.5, SAP will deliver planning through the integrated capabilities of BW-BPS (formerly known as SEM-BPS). This brings together planning, budgeting, and forecasting with monitoring, reporting, and analysis, bundled into one software installation and one support package cycle.
BW-BPS helps you to plan, budget, and forecast by providing functions such as:
Top-down planning and bottom-up contribution with a rich set of planning functions
A planning framework that lets you create and maintain planning models
An user interface for manual planning and analysis
Tools for process control (i.e. status tracking and monitoring) -
Hi,
I need to install something like 300 SAPGui remotly. I have seen that the SAPAdmin could match my requierment, but, I haven't domain controler.
My landscap is like this: Personnal computer under Windows 2000 pro or Xp pro. The file-servers runs under Samba sharing.
Do you know if it's possible to simulate domain controler or to run SAPAdmin without the check of domain controler ?
FrédéricHi,
Pls check this forum thread
SAP GUI for Windows unattended remote installation
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!
Maybe you are looking for
-
Installing a SSD on MacBook Pro
Hi I'm planning on installing a SSD on my MacBook Pro, purchased August 2011. Can anyone point me to the correct kind of disk I should buy? I have found various on Crucial's website, however they all seem slightly different - I recall Crucial being a
-
Party in the Integration Directory
Hi, Why do we need to create a party in the Integration Directory? What is the use of it. Also, the SAP help asks us to create Business service without a party while BPM. Why? Priya
-
Dear sir/Madam My kids have buy some games which we doesent accept from my i phone. How can i refund that or how can we cancel this product? I Zorel
-
My iPhone 5s mail has not updated since Monday; I can see mails on iMac. Checks for mail but nothing new appears. I have checked all settings and deleted and reinstated mail box but no luck. Can anyone help please.
-
Obtaining Data count between dates for a range of dates
Hi, Currently I need to find the number of records for every week starting from the year 1995. Could anyone help me with a query which will display the first and the last day of the week and the records within this range. The week starts from monday.