SAPHTTPA (CONTENT Server)

Hi All ,
We have contected DMS Server to the ECC 6.0 System. I need to checkin the Document through XI System , for this i use "BAPI_DOCUMENT_CHECKIN2" BAPI.
When i use this BAPI in se38 of ECC 6 system it works all fine by checking in the Document:
Content Repository and Storage Catogary is there in the ECC 6.0 system.
I was said in the forums that i have to use below parameters
PF_HTTP_DEST = SAPHTTPA
PF_FTP_DEST = ' '
Should i need to create Content Repository and Storage Catogary in SRM System (For instance external System) same as ECC 6.0 System.
Now am not able to checkin the Doc into DMS system from SRM System , i know am missing with some paramaters , kindly guide me out if any one gone through this BAPI calling from External System and checked in the Doc.
Help me out
Srini

Hi Guys,
Is there any answer for abovr query.
With regards
Srini

Similar Messages

Https access to Sap Content Server 620 with R/3 46C

We are trying to access the Sap Content Server 620 via Https.
We do not want to administer it via HTTPS, (as we know CSADMIN doesn't support Https in rel. 46C as for note 712332). We want to do in way that the users when do check-in/out of originals these go across the
network using Https instead Http.
According note 712330 it should be possible.
Anyone already did it ?
Any suggestions ?
NOte 506314 is not clear. We are in doubt how we applyed it.
What we did:
0)activate the SSL on the Sap COntent Server Web Site, requiring and installing a CA certificate.
1)On the R/3 server in tx OAC0 with %HTTPS filled up the
two boxes with "%HHTPS
required"
1)unpacked the Sap criptolibrary and copied all the files (including those in ntintel subdirectory created during the unpacking) under c:\Programmi\Sap\Frontend\Sapgui on a frontend PC.
2)set the env. variable SAPHTTP=c:\Programmi\Sap\Frontend\Sapgui on
Frontend PC
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the SAPSSLC.pse and the SAPSSLS.pse file with the command :
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the
SAPSSLC.pse and the SAPSSLS.pse file with the command :
sapgenpse get_pse -noreq -p C:\Programmi\SAP\FrontEnd\SAPgui\<PSE-NAME>
CN=localhost
4) we run the test: saphttp https://itmif069
from the frontend to the server where the Content Server is (itmif069). We recive the error:
trc file: "dev_http", trc level: 2, release: "620"
Fri Oct 08 12:26:46 2004
[2256] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#26 $ SAP
[2256] HTTP Start : argc - 2 a0 - saphttp
[2256] https//itmif069
[2256] SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
<<- SapSSLSetTraceFile()==SAP_O_K
=================================================
= SSL Initialization
SapISSLComposeFilename(ssl_lib): using default "sapcrypto.dll"
SapISSLComposeFilename(server_pse): using default "SAPSSLS.pse"
SapISSLComposeFilename(client_pse): using default "SAPSSLC.pse"
SapISSLComposeFilename(anon_pse): using default "SAPSSLA.pse"
= found SAPCRYPTOLIB 5.5.5C pl16 (Jun 10 2004) MT-safe
= found SECUDIR environment variable
= using SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
= secudessl_Create_SSL_CTX(): PSE "SAPSSLA.pse" not found,
=      using PSE "SAPSSLC.pse" as fallback
= The Server SSL_CTX
=    provides this ordered list of 9 ciphersuites:
=       1. SSL_RSA_WITH_RC4_128_SHA
=       2. SSL_RSA_WITH_RC4_128_MD5
=       3. SSL_RSA_WITH_3DES_EDE_CBC_SHA
=       4. SSL_RSA_WITH_DES_CBC_SHA
=       5. SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
=       6. SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
=       7. SSL_RSA_EXPORT_WITH_RC4_40_MD5
=       8. SSL_RSA_WITH_NULL_SHA
=       9. SSL_RSA_WITH_NULL_MD5
= Success -- SapCryptoLib SSL ready!
=================================================
<<- SapSSLInit(, read_profile=0)==SAP_O_K
ERROR => [2256] URI https//itmif069 [http.c       774]
ERROR => [2256] Connect to Host Port 443 error: NIECONN_REFUSED
[http.c       777]
We do not know if the criptolibrary ha to be instyalled to the R/3 server to.
We do not know if the CA certificate instalelled on the Sap COntent Server web site has to be installed on the R/3 server too.
Any suggestion ?
Regards

Caro Mauro,
I'm more or less in the same situation right now.
Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
Please can you help me with the solution implemented.
Find below my current work e-mail adress
[email protected]
Thanks in advance,
Best regards, Xavier Grau.

Timeout when retrieving document from Content Server

Dear experts,
after the migration of an R/3 Enterprise system with a file-based Content Server (CS without database) we experience significant delays when a document shall be retrieved from the Content Server and displayed.
The repository, from which documents are retrieved, has the following properties:
Document Area = ArchiveLink
Storage Type = HTTP content server
Obviously the delay is caused by time-outs when R/3 tries to access the content sever.
The RFC trace recorded during the document retrieval contains the following entries:
Trace file opened at 20100825 104048 CEST SAP-REL 640,0,304 RFC-VER 3
Trace file opened at 20100825 104115 CEST SAP-REL 640,0,304 RFC-VER 3
End of trace *****
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout beim Verbindungsaufbau (Partner vorhanden ?)
ABAP Programm: SAPLSCMS_CLTFC (Transaction: )
Called function module: RFC_PING
User: TSI0403 (Client: 007)
Destination: SAPCMS (handle: 4, , {4C74C1A6-BD3B-3B59-E100-00001A5F0A18})
SERVER> RFC Server Session (handle: 1, 41571399, {4C74D031-BD2C-3B58-E100-00001A5F0A18})
SERVER> Caller host: cimpd38_MPD_38
SERVER> Caller transaction code: MIR4 (Caller Program: CL_GOS_TOOLBOX_VIEW===========CP)
SERVER> Called function module: GOS_EXECUTE_SERVICE
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3268
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout beim Verbindungsaufbau (Partner vorhanden ?)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1660
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout beim Verbindungsaufbau (Partner vorhanden ?)
ABAP Programm: SAPLSCMS_FE_RFC (Transaction: )
Called function module: RFC_PING
User: TSI0403 (Client: 007)
Destination: SAPHTTP (handle: 6, , {4C74C1B4-BD3B-3B59-E100-00001A5F0A18})
SERVER> RFC Server Session (handle: 1, 41571399, {4C74D031-BD2C-3B58-E100-00001A5F0A18})
SERVER> Caller host: cimpd38_MPD_38
SERVER> Caller transaction code: MIR4 (Caller Program: CL_GOS_TOOLBOX_VIEW===========CP)
SERVER> Called function module: GOS_EXECUTE_SERVICE
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3268
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout beim Verbindungsaufbau (Partner vorhanden ?)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1660
I wonder why R/3 first attempts to contact the Content Server via the SAPCMS RFC destination rather than using HTTP (SAPHTTP)? - The connection tests for both RFC connections are successful.
Is there a way to instruct R/3 to go via the SAPHTTP RFC destination as the first choice and NOT via SAPCMS when documents shall be retrieved and displayed?
Thank you,
Rainer Walter
Edited by: Rainer Walter on Sep 3, 2010 3:07 PM

Hi Ravindra,
thank you for looking into this problem. The Content Server is not based on SAP DB/MaxDB. The repositories are represented as plain directory structures in a file system.
My issue is that R/3 is not using the SAPHTTP RFC connection as first choice although the repository is flagged as "HTTP Content Server" but uses another RFC destination instead. When this attempt is timed out, R/3 eventually picks the appropriate RFC destination. So it takes a considerable amount of time until a requested document is finally retrieved from the repository in the Content Server.
I am confused because the system where I experience this behaviour has been built from a system copy of a production system, and the Content Server for this new system has been built from scratch. In the original production system, no timeout is found when users are retrieving documents, and obviously the original R/3 system is using SAPHTTP right away. The original production system and the new system built from a system copy are accessing different Content Servers.
I am looking for a way to instruct the new R/3 system to immediately use the SAPHTTP connection when talking to the Content Server, and I would be grateful for a hint where I can configure this to get rid of these timeouts.
Best regards,
Rainer

SAP Ecc6.0 , content server 6.30, http 500 error when creating content rep

an ECC 6.0 server machine was setup successfully, then Content Server
6.30 was installed on a windows 2000 machine.(url tested from browser
and it showed that CS is running)
using csAdmin transaction tried to create a Content Repository on the
CS machine but during the save process this error pops up
Http error 500 (internal server error) "ContRep     or storage entry
not defined"
upgraded to the latest saphttp.exe patch, but problem still exists
also tried with another instace of CS6.30 on a windows 2003(IIS6.0),
problem still exists.
[it is note worthy that the first CS instance worked fine with ECC5.0]

> an ECC 6.0 server machine was setup successfully,
> then Content Server
> 6.30 was installed on a windows 2000 machine.(url
> tested from browser
> and it showed that CS is running)
> using csAdmin transaction tried to create a Content
> Repository on the
> CS machine but during the save process this error
> pops up
> Http error 500 (internal server error) "ContRep
>     or storage entry
> defined"
> upgraded to the latest saphttp.exe patch, but problem
> still exists
> also tried with another instace of CS6.30 on a
> windows 2003(IIS6.0),
> problem still exists.
>
> [it is note worthy that the first CS instance worked
> fine with ECC5.0]
> an ECC 6.0 server machine was setup successfully,
> then Content Server
> 6.30 was installed on a windows 2000 machine.(url
> tested from browser
> and it showed that CS is running)
> using csAdmin transaction tried to create a Content
> Repository on the
> CS machine but during the save process this error
> pops up
> Http error 500 (internal server error) "ContRep
>     or storage entry
> defined"
> upgraded to the latest saphttp.exe patch, but problem
> still exists
> also tried with another instace of CS6.30 on a
> windows 2003(IIS6.0),
> problem still exists.
>
> [it is note worthy that the first CS instance worked
> fine with ECC5.0]
After Installing the Content server on Windows 2003
you have to execute 4 Commands on Windows 2003 assuming content server is installed in D:\Program Files\SAP\Content Server
Note 698915 - Importing a SAP DB ODBC driver
Note 851146 - ODBC driver cannot be loaded on Windows 2003
Note 781497 - Content server loses connection to the database
Note 301352 - ODBC driver is not registered
Note 751280 - Knowledge Warehouse on Windows 2003
Note 658442 - SAP Content Server 6.30 on Windows 2003 servers
if you don't have time - send me mail on to [email protected] that i can send you the installation docuemnt. with the subject of this Message
regards
PR

Checkin Document to Content Server through Content Repository

Dear All,
When I try to check in Document from ECC 5.0 to the content Server through repository(http storage) throwing error can't checkin.
when I try to serch SMP notes most of the notes saying thats the progam error and for 6.40 we need to edit function madule.
Please let me know if any one has got same error and let me know if any one has implemented this and how
FYI: we are done with all rfc related issues like saphttp,saphttpa,sapftp and sapftpa etc..
please advice me
thanks
Subrahmanyeswara

Hi
I have done all those
FYI: with out repository & catageroy its not posible please read my post clearly
When i try to add doc to the repository which is created for content server (catagery) then i am getting check in doc error

Error While defining the content server

Dear Folks,
We are trying to define the content sever in our sever. It is required for integration of SAP with documentum. We are trying to define in below path.
Cross-Application Components - Document Management - General data - Settings for storage systems - Maintain storage system -
It already have DMS_C1 content repository with storage type R/3 database. We are creating a new content repository with storage type HTTP Content Server. We are giving below inputs.
Vesion No. 0045, HTTP Server - (My machine's FQDN and port is 8080), HTTP script as - sap/bc/contentsever/300.
After giving above inputs, if I click on test connection, I m getting error as Error in HTTP Access:IF_HTTP_CLIENT -> RECIEVE1 ICM_HTTP_CONNECTION_FAILED.
If I define the HTTP content sever as sap-qas.vsnl.co.in (i.e. My quality servers host name) it works fine i.e. connection test goes OK. Does any one know how we can define the content server and what all steps required for the same?
Thanks and Regards,
Kedar

Hi Kedar,
YOu have to provide the details as fallows
Storage type : HTTP content server
Version no. : 45 (based on the content server version)
HTTP server : <content server IP>
Port Number of content server : 1090 (default port)
HTTP Scrip : ContentServer/ContentServer.dll
Once after these details you can check
Also install the DBM gui in your local PC and add this content servers database (if the content server is on MAX DB) then you need to star it from the console or else use the command to start it once after the installation.
/sapdb/programs/bin/dbmcli -d <SID> -u control,plmcont db_state - to check the database status
/sapdb/programs/bin/dbmcli -d <SID> -u control,plmcont db_online - to start the database
Thanks,
Chaitanya

Content Server 6.40 Presents a Save As dialog for ContentServer.dll file

hi All
we have installed successfully the content server 6.40 on a windows 2008 with iis 7 environment. The installation wen successfully with no errors. however when we run a test by calling the URL http://<server>:<port>/ContentServer/ContentServer.dll?serverInfo URL, instead of getting a response, we are getting a save as file dialog to save the dll file. Also, after the installation, even with the install website tick checked, the website was not installed. we had to do the installation of the website manually for the port.
With content server 620 on windows 2000 this was never the case
if anywone has an idea on how to resolve the issue, please advice
Regards
Ronny

GOT the Solution
to anyone else who could be going through the same issue, see if the solution below solves your issue
The website should get created if all the roles in IIS 7.0 are installed. Therefore, please try to install the IIS 7.0 by selecting
all the roles followed by installation of the SAP Content Server. By doing so, websites should be created automatically.
In the IIS 7.0, all the roles are not selected during the installation by default. Please make sure all the below roles are included and IIS 7.0 is installed, as per the installation manual for the Content Server on Windows 2008:
Roles needed in IIS 7.0.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled which is done by
default.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
I hope it helps someone!

Error in Starting DMS(Content Server)

Dear all,
I get the following error while starting the Content server on unix.
i am unbale to start the server , pls assist.
$ pwd
/home/sapcs/bin
$ apachectl start
ld.so.1: httpd: fatal: libucb.so.1: open failed: No such file or directory
Killed
$
Regards,
Irfan

That simply sounds like the PATH for libucb.so.1 is not maintained in your env variables.
That should fix the problem
Regards
Juan

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

Error on update of document stored in content server

Error on update of document stored in content server
On a regular basis (but not reproducible) we find that after updating a document, it is deleted from content server (or at least it cannot be retrieved). These problems have only been experienced since we switched to using content server as our storage repository, as opposed to R/3.
We create and maintain documents through a bespoke transaction, which calls standard SAP functions BDS_BUSINESSDOCUMENT_CREA_TAB and cl_bds_document_set=>update_with_table.
Whilst the errored documents are listed in the BDS via transaction OAOR (business document navigator), an error is received when you try to display it (in our case an MS-Word error indicating file/pathname invalid).
We are satisfied that file/pathname are valid and find that this occurs occasionally when a document has been updated. It appears that the document has been deleted.
This bespoke transaction has been running successfully for almost two years, and these problems have only been experienced after switching to content server as a storage repository (as opposed to R3 previously). Has anyone else experienced these problems?
We are running :
R/3 Enterprise 620,
SAP HTTP Content Server Version 6.30 Patch 13
SAPDB version 7.3.0.54

Hi Sonny,
To check the connectivity between your content server and Workstation and SAP Server.
Pls goto the command prompt of your workstation
give the command like this example.
C:\>Ping 117.123.45.201
you will get the reply from the server. here 117.123.45.201 is your content server IP.
If you are getting the reply then it means that your contentserver and workstation are connected propely.
Like that pls check the connectivity between your systems.
Pls check the hosts file of your systems also.
If the hosts file entry is not maintained, you can check-out file from content server but you cannot check-in the original.
Pls let me know what kind of error Message you are getting?
From where you are trying to check-in the Original? From the DIR screen or from CAD Desktop screen?
Regards,
MRK
(reward points if useful)

Adobe Content Server 3.0.1 Store and Library conflicts

Dear All,
I am working on Adobe Content Server 3.0.1 and able to configure it to ecommerce site but i am unable to package the books when both library and store is configured on my Adobe content server 3.0.1 at a time.
please let me known the version of the content server i using is licensed to use only store or a library at a given time.

We configured Adobe Content Server 3.0.1 and created one store and one library, when we want to lend a eBook i am unable to locate the option for lending the eBook in "Availbility" tag page of "Books" Tab when i set the "Adjust" option to value "Loan".
Please let me know whether my version of content server allows us to package a eBook for lending if so where can i find the option for lending the eBook.

Problem with Content Server 4 keystore access on Ubuntu 8.04

Hello,
Setting up the Content Server I encounter this problem with the fulfillment server Status check-up:
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.Error: Problem reading key and certificate from keystore
     com.adobe.adept.fulfillment.security.ServerConfig.init(ServerConfig.java:201)
     com.adobe.adept.fulfillment.security.ServerConfig.getSigningURL(ServerConfig.java:48)
     com.adobe.adept.fulfillment.servlet.FulfillmentServerStatus.getServers(FulfillmentServerStatus.java:34)
     com.adobe.adept.common.servlet.Status.checkUp(Status.java:355)
     com.adobe.adept.common.servlet.Status.doGet(Status.java:421)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
I've created operator.p12 according to the instructions in the Quickstart guide
and placed it in /etc where it is accessible by the server. I used OpenSSL 0.9.8k
for this.
I can use "openssl pkcs12 -in operator.p12 -out file.pem" to view the contents of
the file.
My Content Server fulfillment configuration is as follows:
com.adobe.adept.init1=com.adobe.adept.shared.util.SharedInitialization
com.adobe.adept.log.level=trace
com.adobe.adept.log.file=/var/log/fulfillment.log
com.adobe.adept.persist.sql.driverClass=com.mysql.jdbc.Driver
com.adobe.adept.persist.sql.connection=jdbc:mysql://127.0.0.1:3306/adept
com.adobe.adept.persist.sql.dialect=mysql
com.adobe.adept.persist.sql.user=ereading
com.adobe.adept.persist.sql.password=********
com.adobe.adept.fulfillment.security.licensesignURL=https://eusigningservice.adobe.com/licensesign
com.adobe.adept.fulfillment.security.keystore.user=operator
com.adobe.adept.fulfillment.security.keystore.password=********
com.adobe.adept.fulfillment.security.pkcs12.file=file:///etc/operator.p12
com.adobe.adept.serviceURL=http://******.dmz.******.org/fulfillment
Any ideas?
Best regards,
Teemu

for solve this, change this
com.adobe.adept.fulfillment.security.pkcs12.file=file:///etc/operator.p12
for this
com.adobe.adept.fulfillment.security.pkcs12.file=/etc/operator.p12

Content Server 10gR3 installation problem on Windows 7

Hi,
I just started working on UCM. I tried to install Content Server 10gR3 on my machine with Windows 7 OS. When I try to install, the installation suddenly aborts or hangs until I abort it. Web server (Apache) and DB (Oracle 10g) are running fine.
System has got adequate configuration: Enough Disk space, 2GB RAM and 2 GHz CPU
The same installer worked perfectly on Windows XP Pro 2002 SP2. Can some one reply if UCM 10g is support on Windows 7 ? This, however, is only for learning purpose on my home PC and not for production use.
I also tried running the installer in Windows XP compatible mode. But this didn't help me either. Do, I need to install Win XP to run it or is there any alternative to make it run on Windows 7.
Thank you
Rama

Hi Srinath,
Thanks for your prompt reply. Could you also please let me know if there is any advanced version of UCM (like 11g) that works on Windows 7 - before I go for a windows XP installation.
Thanks again
Rama

Installation problem in Oracle Content Server 10g

Hi,
I am trying to install 'ORACLE CONTENT SERVER 10g', as a part of this trying to click on 'Installer.exe' in '/win32'. When i click this installer.exe, it is prompting one COMMAND PROMPT SCREEN and it is disappearing soon. In fact it was suppose to ask language preference as per installation guide.
Dont know how to resolve this issue. please help me out.
Thanks in advance,

pparkko wrote:
With this type of behaviour, you always need to find out the real error.
Try opening a command prompt (cmd) and running the command from the command line.
Then you can see what is going wrong.I have a question, I just upgraded our test 11i database (9i) to 10g (10.2), as a part of that upgraded forms, reports, graphics to patchset 18. Now planning to install 10giAS on appsTier on which forms, Apache and discoverer running. If I install 10giAS in differnet home, how can I get that in to appsTier?, does it mean adapcctl script no longer be used to start webservices?. I haven’t done this before, if my question is stupid, please ignore :).

Search Service for Content Server Items

Does Plumtree EDK provide any API to develop search service to search into specific Content Server items as it provides to search within a specific folder of Knowldege Directory

Vivekvp wrote:
Or can someone explain to me what the Search Service does. Before 10.3.0 I think it was integrated with the search.The Collab Admin: Search Service page has a button that allows you to rebuild your search collection.
It shows you the uptime, your install directory, the number of objects indexed and the number pending index requests.
"A rebuild resubmits every item in the database to the Search Service. This procedure is useful in two situations. It can be used to load all data in the database into an empty, freshly installed Search Service. It can also be used to replace the contents of an existing search collection in the unlikely event that it has become corrupted. Note: This operation can be lengthy and computationally expensive and should only be performed if necessary. "
Wish I could be of more help.
Our index has 25.2k files and it took about 5 seconds for the page to load for me - I thought it might timeout too!
Best of luck.
Geoff

SAPHTTPA (CONTENT Server)

Similar Messages

Maybe you are looking for