Sapinit couldn't start SAP properly.
Hi Gurus,
I have setup /etc/init.d/sapinit but somehow everytime the server booting up it just doesnt bring up SAP properly.
System:
RHEL 6.5
ECC 6 EHP7
Error found in starsap log :
Start
FAIL: HTTP error, HTTP/1.1 401 Unauthorized
Temporary solution:
Stop sapinit : service sapinit stop
then startsap, after this everything run normally.
R,
AM
Hi AM
Could you refer the SCN link
SAP does not start - Application Server Infrastructure - SCN Wiki
BR
SS
Similar Messages
-
Error in Start SAP system (Post Processing)
Hi.,
I got an error during IDES installation in the step "Start SAP system (Post Processing)".
The details of START.LOG is as follows
running sapstart.exe GML 00 xyz -wait
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
CreateNamedPipe for
\pipe\SAP_00 Failed, Extended Error #123
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
Start (StartSAPService) failed.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Kindly help me out in this regard.
Thanks in Advance,
SridharSridhar,
Check the path for the profile (whether it is accessible or not). Just to make sure that system has been installed properly, you could try connection check to the database also.
Thanks.
regards,
Murali -
Hi All,
I have installed SAP Router before but this time when I installed and tried to start SAP Router its not getting started, and also not giving any error log file in SAP Router directory.
Please check the below command and correct me if I am wrong.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\sap_admin>cd \
C:\>cd SAPRTR
C:\SAPRTR>saprouter -r -S 3299 -K "p:CN=<MyRouterHOSTNAME>, OU=<Cust_NUM>, OU=SAProuter,
O=SAP, C=DE"
SAP Network Interface Router, Version 38.10
Compiled Oct 7 2009 03:08:09
start router : saprouter -r
stop router : saprouter -s
soft shutdown: saprouter -p
router info : saprouter -l (-L)
new routtab : saprouter -n
toggle trace : saprouter -t
cancel route : saprouter -c id
dump buffers : saprouter -d
flush " : saprouter -f
hide errInfo : saprouter -z
start router with third-party library: saprouter -a library
additional options
-R routtab : name of route-permission-file (default ./saprouttab)
-G logfile : name of log file (default no logging)
-T tracefile : name of trace file (default dev_rout)
-V tracelev : trace level to run with (default 1)
-H hostname : of running SAProuter (default localhost)
-S service : service-name / number (default 3299)
-P infopass : password for info requests
-C clients : maximum no of clients (default 800)
-Y servers : maximum no of servers to start (default 1)
-K [myname] : activate SNC; if given, use 'myname' as own sec-id
-A initstring: initialization options for third-party library
-D : switch DNS reverse lookup off
-E : append log- and trace-files to existing
-J filesize : maximum log file size in byte (default off)
-6 : IPv6 enabled
-Z : hide connect error information for clients
expert options
-B quelength : max. no. of queued packets per client (default 1)
-Q queuesize : max. total size for all queues (default 20000000 bytes)
-W waittime : timeout for blocking net-calls (default 5000 millisec)
-M min.max : portrange for outgoing connects, like -M 1.1023
-I address : address for outgoing connects, like -I 155.56.76.6
this is a sample routtab : -----------------------------------------
D host1 host2 serviceX
D host3
P * * serviceX
P 155.56.. 155.56
P 155.57.1011xxxx.*
P host4 host5 * xxx
P host6 localhost 3299
P host7 host8 telnet
S host9
P0,* host10
KP sncname1 * *
KS * host11 *
KD "sncname "abc" * *
KT sncname3 host11 *
deny routes from host1 to host2 serviceX
deny all routes from host3
permit routes from anywhere to any host using serviceX
permit all routes from/to addresses matching 155.56
permit ... with 3rd byte matching 1011xxxx
permit routes from host4 to host5 if password xxx supplied
permit information requests from host6
permit native-protocol-routes to non-SAP-server telnet
permit ... excluding native-protocol-routes (SAP-servers only)
permit ... if number of preceding/succeeding hops (SAProuters) <= 0/*
permit SNC-connection with partnerid = 'sncname1' to any host
permit all SAP-SAP SNC-connections to host11
deny all SNC-connections with partnerid = 'sncname "abc'
open connects to host11 with SNC enabled and partnerid = 'sncname3'
first match [host/sncname host service] is used
permission is denied if no entry matches
service wildcard (*) does not apply to native-protocol-routes
C:\SAPRTR>
Rg
RameshHello my friend
It could be certificate didn't import properly or routtab content is not correct. Here's your checklist:
Creating the certificate request
1) As user <snc_adm> set the environment variables SNC_LIB and SECUDIR
2) Change to the alias SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant u201CDistinguished Nameu201D.
3) Generate the certificate Request with the command:
sapgenpse get_pse -v -r certreq -p local.pse u201C<Distinguished Name>u201D
You will be asked twice for a PIN here. Please choose a PIN and document it, you have to enter it identically both times. Then you will have to enter the same PIN every time you want to use this PSE.
4) Display the output file "certreq" and with copy&paste (including the BEGIN and END statement) insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name.
5) In response you will receive the certificate signed by the CA in the Service Marketplace. Copy&paste the text to a new local file named "srcert", which must be created in the same directory as the sapgenpse executable.
6) With this in turn you can install the certificate in your saprouter by calling:
sapgenpse import_own_cert -c srcert -p local.pse
7) Now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user_for_saprouter>, the credentials are created for the logged in user account).
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
Note: The account of the service user should always be entered in full <domainname>\<username>
8) This will create a file called "cred_v2" in the same directory as "local.pse"
9) Check if the certificate has been imported successfully with the following command:
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be:
CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
10) If this is not the case, delete the files "cred_v2"and "local.pse" and start over at Item 3.
Additional actions necessary before you can start SAProuter
1. Check if the environment of the user running SAProuter contains the environment variable SNC_LIB and SECUDIR
2. Start the SAProuter with the following command line (to start the SAProuter as a Windows service, please follow the steps described in SAP note 525751):
saprouter -r -S <port> -K "p:<Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
3. The corresponding file "saprouttab" should look like:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
SNC-connection from SAP to telnet in your network
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P * 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your IP> <port>
Regards,
Effan
DON'T KNOW WHY THE FORMAT MESSED UP, PLEASE USE QUOTE ORIGINAL IN REPLY MODE TO READ THE CORRECT FORMAT CONTENT. SORRY! -
Oracle can be started but when try to start sap with startsap then it is thorowing error 12
After executing R3trans -x getting the following error
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/YC5/SYS/exe/run/dboras
lib.so' ...
4 ETW000
94 0.000743
4 ETW000 [dlux.c ,00000] *** ERROR => DlLoadLib: dlopen()= Unable to find li
brary 'libclntsh.so.10.1'. -> DLENOACCESS (0,Error 0)
4 ETW000
1345 0.002088
4 ETW000 [dbcon.c ,00000] *** ERROR => Couldn't load library '/usr/sap/YC5/SY
...skipping...
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 26.09.2007 - 09:34:01
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Sep 26 09:34:01 2007 432 0.000432
4 ETW000 [dev trc ,00000] db_con_init called 40 0.000472
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 177 0.000649
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/YC5/SYS/exe/run/dboraslib.so' ...
4 ETW000 94 0.000743
4 ETW000 [dlux.c ,00000] *** ERROR => DlLoadLib: dlopen()= Unable to find library 'libclntsh.so.10.1'. -> DLENOACCESS (0,Error 0)
4 ETW000 1345 0.002088
4 ETW000 [dbcon.c ,00000] *** ERROR => Couldn't load library '/usr/sap/YC5/SYS/exe/run/dboraslib.so'
4 ETW000 46 0.002134
2EETW169 no connect possible: "invalid values set for DIR_LIBRARY '/usr/sap/YC5/SYS/exe/run' or dbms_type 'ORA'"
sd2n1v5:yc5adm>Hi there
The DB has to be open and the listener must be running, otherwise SAP or R3trans cannot connect.
For the client library problem, please check if you have the lib here. Path should be something like /oracle/client/10x_64/instantclient_10202/libclntsh.so.10.1
A very common error is the missing link:
ll /oracle/client/10x_64
-rwxrwxr-x 1 sidadm sapsys 33 Mar 27 2006 dbclient.lst
lrwxrwxrwx 1 sidadm sapsys 41 Nov 29 2006 <b>instantclient -> /oracle/client/10x_64/instantclient_10202</b>
dr-xr-xr-x 2 sidadm sapsys 1024 Nov 15 2006 instantclient_10202
Please do also check if the SAP Kernel Lib can resolve to the client lib, here is an example:
sidadm 53><b> ldd /sapmnt/SID/exe/dboraslib.so</b>
libnsl.so.1 => /usr/lib/hpux64/libnsl.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libclntsh.so.10.1 => <b>/oracle/client/10x_64/instantclient/libclntsh.so.10.1</b>
libnnz10.so => /oracle/client/10x_64/instantclient/libnnz10.so
libc.so.1 => /usr/lib/hpux64/libc.so.1
libxti.so.1 => /usr/lib/hpux64/libxti.so.1
/oracle/client/10x_64/instantclient/libnnz10.so => /oracle/client/10x_64/instantclient/libnnz10.so
librt.so.1 => /usr/lib/hpux64/librt.so.1
libnss_dns.so.1 => /usr/lib/hpux64/libnss_dns.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libm.so.1 => /usr/lib/hpux64/libm.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libunwind.so.1 => /usr/lib/hpux64/libunwind.so.1
libnsl.so.1 => /usr/lib/hpux64/libnsl.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libuca.so.1 => /usr/lib/hpux64/libuca.so.1
If you cannot resolve the problem with this info, just post the outputs of these commands here.
Best regards
Michael -
Dispatcher stops after starting SAP and turning from green to grey
After starting SAP on the SAP Console, the dispatcher turns from green to grey and logging on to SAP is not possible. Below is the developer trace file for the process:
SAPPRD\saploc\PRD\DVEBMGS00\work\dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Mar 27 14:47:21 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 3732
***LOG Q00=> DpSapEnvInit, DPStart (00 3732) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Mar 27 14:47:34 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0000.qqq.nxst) took 13 seconds
Tue Mar 27 14:47:51 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS
settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 21528 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04BA0040, size: 2520320)
DpShMCreate: allocated sys_adm at 04BA0040
DpShMCreate: allocated wp_adm at 04BA17A8
DpShMCreate: allocated tm_adm_list at 04BA6BC0
DpShMCreate: allocated tm_adm at 04BA6BE8
DpShMCreate: allocated wp_ca_adm at 04DC4B30
DpShMCreate: allocated appc_ca_adm at 04DC9180
DpShMCreate: allocated comm_adm_list at 04DCA8F0
DpShMCreate: allocated comm_adm at 04DCA908
DpShMCreate: allocated vmc_adm_list at 04DF9708
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04DF9730
DpShMCreate: allocated wall_adm at 04DF9738
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2264 blocks reserved for free list.
ES initialized.
Tue Mar 27 14:47:52 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( SAPPRD) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Mar 27 14:48:32 2007
ERROR => W0 (pid 5396) died [dpxxdisp.c 12187]
ERROR => W1 (pid 1536) died [dpxxdisp.c 12187]
ERROR => W2 (pid 5404) died [dpxxdisp.c 12187]
ERROR => W3 (pid 1520) died [dpxxdisp.c 12187]
ERROR => W4 (pid 4208) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3584) died [dpxxdisp.c 12187]
ERROR => W6 (pid 4512) died [dpxxdisp.c 12187]
ERROR => W7 (pid 5484) died [dpxxdisp.c 12187]
ERROR => W8 (pid 5488) died [dpxxdisp.c 12187]
ERROR => W9 (pid 5500) died [dpxxdisp.c 12187]
ERROR => W10 (pid 888) died [dpxxdisp.c 12187]
ERROR => W11 (pid 5512) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W12 (pid 5520) died [dpxxdisp.c 12187]
ERROR => W13 (pid 5528) died [dpxxdisp.c 12187]
ERROR => W14 (pid 5532) died [dpxxdisp.c 12187]
ERROR => W15 (pid 5536) died [dpxxdisp.c 12187]
ERROR => W16 (pid 5468) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W17 (pid 5564) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W18 (pid 1676) died [dpxxdisp.c 12187]
ERROR => W19 (pid 5652) died [dpxxdisp.c 12187]
ERROR => W20 (pid 4704) died [dpxxdisp.c 12187]
ERROR => W21 (pid 1796) died [dpxxdisp.c 12187]
ERROR => W22 (pid 5568) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W23 (pid 6084) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W24 (pid 5704) died [dpxxdisp.c 12187]
ERROR => W25 (pid 3580) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5396 (SIGUSR2)
ERROR => DpWpKill(5396, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-1536 (SIGUSR2)
ERROR => DpWpKill(1536, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-5404 (SIGUSR2)
ERROR => DpWpKill(5404, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1520 (SIGUSR2)
ERROR => DpWpKill(1520, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-4208 (SIGUSR2)
ERROR => DpWpKill(4208, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3584 (SIGUSR2)
ERROR => DpWpKill(3584, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-5484 (SIGUSR2)
ERROR => DpWpKill(5484, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-5488 (SIGUSR2)
ERROR => DpWpKill(5488, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-5500 (SIGUSR2)
ERROR => DpWpKill(5500, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-888 (SIGUSR2)
ERROR => DpWpKill(888, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-5512 (SIGUSR2)
ERROR => DpWpKill(5512, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-5520 (SIGUSR2)
ERROR => DpWpKill(5520, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-5528 (SIGUSR2)
ERROR => DpWpKill(5528, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-5532 (SIGUSR2)
ERROR => DpWpKill(5532, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-5536 (SIGUSR2)
ERROR => DpWpKill(5536, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-5468 (SIGUSR2)
ERROR => DpWpKill(5468, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-5564 (SIGUSR2)
ERROR => DpWpKill(5564, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-1676 (SIGUSR2)
ERROR => DpWpKill(1676, SIGUSR2) failed [dpxxtool.c 2468]
killing W19-5652 (SIGUSR2)
ERROR => DpWpKill(5652, SIGUSR2) failed [dpxxtool.c 2468]
killing W20-4704 (SIGUSR2)
ERROR => DpWpKill(4704, SIGUSR2) failed [dpxxtool.c 2468]
killing W21-1796 (SIGUSR2)
ERROR => DpWpKill(1796, SIGUSR2) failed [dpxxtool.c 2468]
killing W22-5568 (SIGUSR2)
ERROR => DpWpKill(5568, SIGUSR2) failed [dpxxtool.c 2468]
killing W23-6084 (SIGUSR2)
ERROR => DpWpKill(6084, SIGUSR2) failed [dpxxtool.c 2468]
killing W24-5704 (SIGUSR2)
ERROR => DpWpKill(5704, SIGUSR2) failed [dpxxtool.c 2468]
killing W25-3580 (SIGUSR2)
ERROR => DpWpKill(3580, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:42 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Mar 27 13:48:42 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action
Table
0 DIA 5396 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 5404 Ended no 1 0 0
3 DIA 1520 Ended no 1 0 0
4 DIA 4208 Ended no 1 0 0
5 DIA 3584 Ended no 1 0 0
6 DIA 4512 Ended no 1 0 0
7 DIA 5484 Ended no 1 0 0
8 DIA 5488 Ended no 1 0 0
9 DIA 5500 Ended no 1 0 0
10 DIA 888 Ended no 1 0 0
11 DIA 5512 Ended no 1 0 0
12 UPD 5520 Ended no 1 0 0
13 UPD 5528 Ended no 1 0 0
14 UPD 5532 Ended no 1 0 0
15 UPD 5536 Ended no 1 0 0
16 UPD 5468 Ended no 1 0 0
17 ENQ 5564 Ended no 1 0 0
18 BTC 1676 Ended no 1 0 0
19 BTC 5652 Ended no 1 0 0
20 BTC 4704 Ended no 1 0 0
21 BTC 1796 Ended no 1 0 0
22 BTC 5568 Ended no 1 0 0
23 SPO 6084 Ended no 1 0 0
24 UP2 5704 Ended no 1 0 0
25 UP2 3580 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 27 13:48:42 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue Mar 27 13:48:42 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T26, U27, , SAPPRD, 14:48:24, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Tue Mar 27 13:48:42 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:47 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1844) (SOFT_KILL)
Stop icman
killing process (5376) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 26
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
return errno (-17) to T26
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T26 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1216
dp_tm_adm[26].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1175003332
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 26
DpListInsert: insert elem 26 into tmadm_free_list (at begin)
DpListInsert: 175 elems in tmadm_free_list
DpListRemove: remove elem 26 from tmadm_inuse_list
DpListRemove: 26 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:1844 HANDLE:1500)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1844 HANDLE:1500)
[DpProcDied] Process died (PID:5376 HANDLE:1492)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'SAPPRD'
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1504
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3732) [dpxxdisp.c 8495]
Good Bye .....what is the name of your hostname? 'pun-idmqa-vm1'?
Try changing the hostname for another one with 8 characters...
good luck, -
FJS-00012 ERROR while executing script in start SAP system
Hi experts,
I am getting error in the Oracle preload actions while installing the SAP 4.7 using the ORacle 9.2.0.1..
FJS-00012 Error when executing script in start SAP system(post processing)
My comp configuration is as follows:
160 gb hard disk
RAM 1GB
OS: win 2003 server enterprise edition
oracle 8.1.7
During the Database Load (post processing) section of the
installation, i get an error and the installation fails.
I am giving all the logs here including the trace log and the
Sapview.log file ans sapinst.
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: START OF LOG: 20070511002459
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ESA\SYS\exe\run/R3load.exe -ctf I E:\db3\EXPORT3/DATA/SAPVIEW.STR C:\SAPinst ORACLE KERNEL/DDLORA.TPL C:\SAPinst ORACLE KERNEL/SAPVIEW.TSK ORA -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -o D
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: END OF LOG: 20070511002500
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: START OF LOG: 20070511070423
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ESA\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPESA's password
DbSl Trace: Connecting as /@ESA on connection 0 ...
DbSl Trace: Attaching to DB Server ESA (con_hdl=0,svchp=002BD418,svrhp=002BD224)
DbSl Trace: Starting user session (con_hdl=0,svchp=002BD418,srvhp=002BD224,usrhp=00304E94)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=002BD418,usrhp=00304E94)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPESA/<pwd>@ESA on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=002BD418,srvhp=002BD224,usrhp=00304E94)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance esa is running on MALTI with ORACLE version 8.1.7.4.1 since 20070511
(DB) INFO: connected to DB
(DB) INFO: /SAPTRX/A_CONDF4 created
(DB) INFO: /SAPTRX/VDASFEV created
(DB) INFO: /SAPTRX/VDASFPAR created
(DB) INFO: /SAPTRX/VD_AOMIL created
(DB) INFO: /SAPTRX/VD_AOPAC created
(DB) INFO: /SAPTRX/VD_AOPAE created
(DB) INFO: /SAPTRX/VD_AOPAI created
(DB) INFO: /SAPTRX/VD_AOPAR created
(DB) INFO: /SAPTRX/VD_AOTD1 created
(DB) INFO: /SAPTRX/VD_AOTD2 created
(DB) INFO: /SAPTRX/VD_AOTDD created
(DB) INFO: /SAPTRX/VD_AOTYP created
(DB) INFO: /SAPTRX/VD_ASPAR created
(DB) INFO: /SAPTRX/VD_CONDL created
(DB) INFO: /SAPTRX/V_AODD02 created
(DB) INFO: /SAPTRX/V_DD03 created
(DB) INFO: /SAPTRX/V_DD03X created
(DB) INFO: /SDF/SMODICOMP created
(DB) INFO: /SDF/SMODIDEVC created
(DB) INFO: /SDF/UMOD_COMP created
(DB) INFO: ACEPSOIT_UPD created
(DB) INFO: ADJV_TRANS_DIF created
(DB) INFO: AFFWV0 created
(DB) INFO: AFKO_LAUFN created
(DB) INFO: AFSPLIT created
(DB) INFO: AFVCP created
(DB) INFO: ALM_ME_T003O_IS created
(DB) INFO: ALM_ME_T350I created
(DB) INFO: ALM_ME_TQ80_T created
(DB) INFO: ANEKPV created
(DB) INFO: APOUPD created
(DB) INFO: APPL_DEVC created
(DB) INFO: APPL_DIAL created
(DB) INFO: APPL_DOMA created
(DB) INFO: APPL_DTEL created
(DB) INFO: APPL_ENQU created
(DB) INFO: APPL_FUGR created
(DB) INFO: APPL_FUGRG created
(DB) INFO: APPL_FUNC created
(DB) INFO: APPL_INDX created
(DB) INFO: APPL_MCOB created
(DB) INFO: APPL_MENU created
(DB) ERROR: DDL statement failed
(CREATE VIEW "APPL_MODS" ( "NAME" , "TYP" , "MEMBER" , "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X')
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=002BD418,usrhp=00304E94)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=002BD418,srvhp=002BD224)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: END OF LOG: 20070511070433
SAPINST
INFO 2007-05-10 23:59:05
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2007-05-10 23:59:16
The 'saploc' share exists at directory 'D:\usr\sap'. Choosing drive D: as SAP System drive.
INFO 2007-05-10 23:59:21
Copying file E:/KERNEL/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
INFO 2007-05-10 23:59:21
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
INFO 2007-05-11 00:01:52
Copying file E:/db1/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2007-05-11 00:01:52
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.XML.
INFO 2007-05-11 00:01:52
Copying file system node E:\db1\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
INFO 2007-05-11 00:01:52
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-05-11 00:01:52
Copying file E:/db1/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2007-05-11 00:01:52
Creating file C:\SAPinst ORACLE KERNEL\DDLORA.TPL.
INFO 2007-05-11 00:01:52
Copying file system node E:\db1\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
INFO 2007-05-11 00:01:52
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-05-11 00:01:57
Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2007-05-11 00:01:57
Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2007-05-11 00:01:57
Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2007-05-11 00:03:00
Package table created
PHASE 2007-05-11 00:04:15
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2007-05-11 00:04:15
SAP Web Application Server
PHASE 2007-05-11 00:04:15
Request common parameters of SAP System
PHASE 2007-05-11 00:04:15
Create operating system accounts
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.1.xml.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\keydb.1.xml.
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.xml to: C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.1.xml.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.1.xml.
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.1.XML.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.1.XML.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1004 ACCOUNTNAME=malti\SAP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1005 ACCOUNTNAME=malti\SAP_ESA_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1006 ACCOUNTNAME=malti\SAP_ESA_GlobalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Global Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1007 ACCOUNTNAME=ORA_ESA_DBA ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Operator Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1008 ACCOUNTNAME=ORA_ESA_OPER ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
INFO 2007-05-11 00:04:18
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1009 ACCOUNTNAME=malti\esaadm ACCOUNTTYPE=USER DESCRIPTION=SAP System Administrator MEMBERSHIP=malti\SAP_ESA_GlobalAdmin,malti\Users,Administrators,ORA_ESA_DBA,ORA_ESA_OPER,malti\SAP_LocalAdmin,malti\SAP_ESA_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-05-11 00:04:18
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1010 ACCOUNTNAME=malti\SAPServiceESA ACCOUNTTYPE=USER CONDITION=YES DESCRIPTION=SAP System Service Administrator MEMBERSHIP=malti\SAP_ESA_GlobalAdmin,Administrators,ORA_ESA_DBA,ORA_ESA_OPER,malti\SAP_LocalAdmin,malti\SAP_ESA_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-05-11 00:04:18
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
INFO 2007-05-11 00:04:21
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-05-11 00:04:22
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa_16 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata1\esa620_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata1\esa620_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata2\esa620_2.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata2\esa620_2 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata3\esa620_3.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata3\esa620_3 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata4\esa620_4.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata4\esa620_4 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata4\esa620_5.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata4\esa620_5 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata5\esa620_6.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata5\esa620_6 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata5\esa620_7.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata5\esa620_7 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esa620_8.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa620_8 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esa620_9.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa620_9 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esausr_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esausr_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata2\roll_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata3\temp_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata1\system_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-05-11 00:05:40
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-05-11 00:05:40
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-05-11 00:05:41
Creating file D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:05:42
Creating file D:\oracle\ora81\database\initESA.sap.
INFO 2007-05-11 00:05:43
Copying file E:/KERNEL/NT/COMMON/INSTALL/INITSID.DBA to: D:\oracle\ora81/database/initESA.dba.
INFO 2007-05-11 00:05:43
Creating file D:\oracle\ora81\database\initESA.dba.
INFO 2007-05-11 00:05:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:05:45
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:05:45
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:05:45
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:05:46
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2007-05-11 00:05:51
See 'D:\oracle\ora81/bin/oradim -new -sid ESA -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2007-05-11 00:05:51
'D:\oracle\ora81/bin/oradim -new -sid ESA -STARTMODE auto' returned with '0'.
INFO 2007-05-11 00:05:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:05:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:31
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:07:31
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:07:31
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:07:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:09:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:09:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:15
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:53
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:14:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:14:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:11
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:16:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:16:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:18:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:18:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:20:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:20:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:22:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:22:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:47
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:15
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:46
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:24:46
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:24:46
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:24:46
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-05-11 00:24:47
See 'D:\oracle\ora81/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-05-11 00:24:47
'D:\oracle\ora81/bin/lsnrctl stat' returned with '3'.
INFO 2007-05-11 00:24:47
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-05-11 00:24:48
See 'D:\oracle\ora81/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-05-11 00:24:48
'D:\oracle\ora81/bin/lsnrctl start' returned with '0'.
INFO 2007-05-11 00:24:49
Copying file E:/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2007-05-11 00:24:49
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2007-05-11 00:24:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
PHASE 2007-05-11 00:24:54
Database Load
INFO 2007-05-11 00:24:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:00
Task files created
INFO 2007-05-11 00:25:00
Command files created
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 02:18:03
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL1.log
INFO 2007-05-11 02:18:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 02:44:07
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX2.log
INFO 2007-05-11 02:44:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 03:55:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:25:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:42:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:47:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:55:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:57:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:59:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:01:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:03:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:04:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:05:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 07:04:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 07:04:33
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2007-05-11 07:04:33
FJS-00012 Error when executing script.
THANKS ALLL IN ADVANCE,
Regards,
Maltino space left on devices...
==> "<b>MOS-01109 Needed space on mountpoint F:/ is 5.248e07 KB, but got only 4.26433e07 KB.</b>"
and others...
-> provide more space and restart
GreetZ, AH -
Error while Installing and Starting SAP Widget Development Tools
Hi All,
I have downloaded Eclipse: eclipse-SDK-3.3.2-win32.zip from http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.3.2-200802211800/eclipse-SDK-3.3.2-win32.zip
I am following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
for Installing and Starting SAP Widget Development Tools as an Eclipse Plug-in
I am very new to it, So I was following Step by Step procedure.
On the 16th step I am getting an error:
AP Widget Templates (0.12.0.1167) requires feature "org.eclipse.gef (3.3.0)", or equivalent.
I had download the SAP Widget Development Tools.zip file from https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/b03b6544-c741-2a10-8999-ed04eb2b2c71
While unzipping the eclipse-SDK-3.3.2-win32.zip, there were two errors:
The System cannot find the file specified &
The file name or extension is too long.
I ignored them and continued the unzipping.
Please guide me as to how we can solve this error.
Ankur
Is it because I am using Eclipse 3.3.2 and not 3.3.0? If yes from where I can download Eclipse 3.3.0
Edited by: ankur malhotra on Jul 25, 2008 7:36 AMHi Ankur,
This happens sometimes because of the Eclipse that you use. Download the Eclipse JEE Version. When you go to eclipse.org and try to download eclipse you can do a comparision of the versions there, You download the version which supports all the web features.
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/ganymeder
Check the above link you will be able to see the package details. Please download this Java IDE for EE developers and try installing the SAP widgets foundation then, If you are facing any problems in installing the plugins thru local archived site please let me know.
Regards,
Sai -
Unabl to start sap (DISP+WORK Stopped) While installing/importing database
Dear Experts, As iam installing/ importing windows ecc 6.0 sr3 & DB2 9.5 ( Database exported using Hetrogeneous system copy from sqlserver 2005 to DB2), All phases finished and finally start sap failed due to db connect failure and i have tried by mmc and command mode but no hope. . Kindly help. trans log file and dev_w0 files below.
_Trans log file_
4 ETW000 r3trans version 6.14 (release 700 - 05.03.09 - 08:28:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 06.10.2009 - 05:15:05
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:07 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbdb6slib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dbdb6slib.dll), hdl 0 9294 0.009294
4 ETW000 [dev trc ,00000] using "E:\usr\sap\SA4\SYS\exe\uc\NTAMD64\dbdb6slib.dll" 41 0.009335
4 ETW000 [dev trc ,00000] Library 'dbdb6slib.dll' loaded 25 0.009360
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbdb6slib.dll 23 0.009383
4 ETW000 [dev trc ,00000] Version of 'dbdb6slib.dll' is "700.08", patchlevel (0.201) 641 0.010024
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbdb6slib.dll 26 0.010050
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbdb6slib.dll 26 0.010076
4 ETW000 [dev trc ,00000] New connection 0 created 36 0.010112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.010162
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.010193
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 24 0.010217
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 40 0.010257
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:08 2009 472441 0.482698
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '
mascon-sap2\sapmnt\SA4\SYS\global\db6\WINDOWS_AMD64\db6_clidriver\bin\db2app64.dll' successfully loaded
4 ETW000 51 0.482749
4 ETW000 35 0.483487
4 ETW000 [dev trc ,00000] (0.54) DB6: error handling in DBSL CLP (note 940260) 24 0.483511
4 ETW000 [dev trc ,00000] (0.69) DB6: technical support of DB2 CLI driver (note 962892) 25 0.483536
4 ETW000 [dev trc ,00000] (0.73) DB6: log table name on TRUNCATE failure (note 970743) 24 0.483560
4 ETW000 [dev trc ,00000] (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000 34 0.483594
4 ETW000 [dev trc ,00000] (0.82) DB6: CAST for SSTRING data types (note 989568) 24 0.483618
4 ETW000 [dev trc ,00000] (0.86) DB6: long runtimes for R3szchk (note 1000847) 24 0.483642
4 ETW000 [dev trc ,00000] (0.88) DB6: patch collection Dec 06 (note 1005574) 24 0.483666
4 ETW000 [dev trc ,00000] (0.96) DB6: patch collection Jan 07 (note 1017852) 24 0.483690
4 ETW000 [dev trc ,00000] (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102) 24 0.483714
4 ETW000 [dev trc ,00000] (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779) 25 0.483739
4 ETW000 [dev trc ,00000] (0.107) DB6: patch collection Apr 07 (note 1047194) 24 0.483763
4 ETW000 [dev trc ,00000] (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
4 ETW000 37 0.483800
4 ETW000 [dev trc ,00000] (0.113) DB6: work process type in application snapshot (note 1059905)
4 ETW000 88 0.483888
4 ETW000 [dev trc ,00000] (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
4 ETW000 35 0.483923
4 ETW000 [dev trc ,00000] (0.117) DB6: patch for execution of long DDL statements (note 1069658)
4 ETW000 35 0.483958
4 ETW000 [dev trc ,00000] (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
4 ETW000 35 0.483993
4)
4 ETW000 35 0.484718
4 ETW000 [dev trc ,00000] (0.198) DB6: patch collection 02/09 (note 1294443) 24 0.484742
4 ETW000 [dev trc ,00000] (0.201) DB6: cobra enhancements (note 1315762) 24 0.484766
4 ETW000 [dev trc ,00000] Supported features: 20 0.484786
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 28 0.484814
4 ETW000 [dev trc ,00000] ..done 475 0.485289
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 22 0.485311
4 ETW000 [dev trc ,00000] Running with CLI driver. 376278 0.861589
4 ETW000 [dev trc ,00000] DB2 client driver version '09.05.0004' 373762 1.235351
4 ETW000 [dev trc ,00000] Connected to DB server type 'DB2/NT64' 2467 1.237818
4 ETW000 [dev trc ,00000] Connected to DB server version '09.05.0004' 520 1.238338
4 ETW000 [dev trc ,00000] Connected to 'SA4' as 'SAPSA4' schema 'SAPSA4' o.k. 44597 1.282935
4 ETW000 [dev trc ,00000] Connected: con_hdl=0 ; appl_hdl=19; appl_id="10.0.0.146.44548.091006101508"
4 ETW000 50 1.282985
4 ETW000 [dev trc ,00000] Database code page is ok. 480 1.283465
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:09 2009 241001 1.524466
4 ETW000 [dev trc ,00000] Database collating sequence is ok. 38 1.524504
4 ETW000 [dev trc ,00000] DB2_WORKLOAD=SAP is set in DB2 registry as required. 45663 1.570167
4 ETW000 [dev trc ,00000] CLI Insert Buffering is disabled on single partition databases. 35785 1.605952
4 ETW000 [dev trc ,00000] INFO: Unable to determine SAPDBHOST; defaulting to 'UNKNOWN' 255 1.606207
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 27 1.606234
4 ETW000 [dev trc ,00000] INFO: Unable to determine SAPDBHOST; defaulting to 'UNKNOWN' 20363 1.626597
4 ETW000 Connected to database.
4 ETW000 [dev trc ,00000] Disconnecting from ALL connections: 72901 1.699498
4 ETW000 [dev trc ,00000] Disconnected from 'SA4' 2049 1.701547
4 ETW000 [dev trc ,00000] Disconnected: con_hdl=0 ; appl_hdl=19; appl_id="10.0.0.146.44548.091006101508"
4 ETW000 46 1.701593
4 ETW000 [dev trc ,00000] Disconnected from connection 0 79 1.701672
4 ETW000 [dev trc ,00000] statistics db_con_commit (com_total=0, com_tx=0) 121 1.701793
4 ETW000 [dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0) 24 1.701817
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 06.10.2009 - 05:15:09
dev_w0 file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Oct 06 05:07:11 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.201)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid SA4
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 201
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3572
M
M kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3572) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Tue Oct 06 05:07:12 2009
M ThInit: running on host mascon-sap2
M calling db_connect ...
C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf'
C
C &+
C &+
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] (END)
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1451]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10561]
M
M Info for wp 0
M
M pid = 3572
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server mascon-sap2_SA4_00 on host mascon-sap2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Oct 06 05:07:12 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10781
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3572) [dpnttool.c 333]
Thanks in advanc
ChidamDear experts, As i have updated as per yours inputs and still unable to start sap. Kindly help.
1. SAPDBHOST is now accepting and there is no issues on "SAPDBHOST unknown."
2. dscdb6.conf file is available and it has all permission (including login userlevel)
3. dscdb6.conf was recreated new and tried, still dev_w0 shows
"M ThInit: running on host mascon-sap2
M calling db_connect ...
C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf' "
4. Environment variable all were added.
Tans log file
4 ETW000 r3trans version 6.14 (release 700 - 05.03.09 - 08:28:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.10.2009 - 06:34:10
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:12 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbdb6slib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dbdb6slib.dll), hdl 0 9419 0.009419
4 ETW000 [dev trc ,00000] using "E:\usr\sap\SA4\SYS\exe\uc\NTAMD64\dbdb6slib.dll" 33 0.009452
4 ETW000 [dev trc ,00000] Library 'dbdb6slib.dll' loaded 24 0.009476
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbdb6slib.dll 23 0.009499
4 ETW000 [dev trc ,00000] Version of 'dbdb6slib.dll' is "700.08", patchlevel (0.201) 635 0.010134
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbdb6slib.dll 26 0.010160
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbdb6slib.dll 26 0.010186
4 ETW000 [dev trc ,00000] New connection 0 created 36 0.010222
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 60 0.010282
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.010313
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 24 0.010337
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.010378
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:13 2009 473631 0.484009
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '
mascon-sap2\sapmnt\SA4\SYS\global\db6\WINDOWS_AMD64\db6_clidriver\bin\db2app64.dll' successfully loaded
4 ETW000 57 0.484066
4 ETW000 [dev trc ,00000] Supported features: 21 0.486055
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 21 0.486076
4 ETW000 [dev trc ,00000] ..done 491 0.486567
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 21 0.486588
4 ETW000 [dev trc ,00000] Running with CLI driver. 329019 0.815607
4 ETW000 [dev trc ,00000] DB2 client driver version '09.05.0004' 266666 1.082273
4 ETW000 [dev trc ,00000] Connected to DB server type 'DB2/NT64' 3005 1.085278
4 ETW000 [dev trc ,00000] Connected to DB server version '09.05.0004' 513 1.085791
4 ETW000 [dev trc ,00000] Connected to 'SA4' as 'SAPSA4' schema 'SAPSA4' o.k. 20120 1.105911
4 ETW000 [dev trc ,00000] Connected: con_hdl=0 ; appl_hdl=381; appl_id="10.0.0.146.19717.091007113413"
4 ETW000 44 1.105955
4 ETW000 [dev trc ,00000] Database code page is ok. 37 1.105992
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:14 2009 52298 1.158290
4 ETW000 [dev trc ,00000] Database collating sequence is ok. 34 1.158324
4 ETW000 [dev trc ,00000] DB2_WORKLOAD=SAP is set in DB2 registry as required. 18173 1.176497
4 ETW000 [dev trc ,00000] CLI Insert Buffering is disabled on single partition databases. 10689 1.187186
*4 ETW000 [dev trc ,00000] DbSlControl: returning SAPDBHOST='mascon-sap2' 235 1.187421
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 24 1.187445
4 ETW000 [dev trc ,00000] DbSlControl: returning SAPDBHOST='mascon-sap2' 5737 1.193182
4 ETW000 Connected to database.*
4 ETW000 [dev trc ,00000] Disconnecting from ALL connections: 9176 1.202358
4 ETW000 [dev trc ,00000] Disconnected from 'SA4' 2033 1.204391
4 ETW000 [dev trc ,00000] Disconnected: con_hdl=0 ; appl_hdl=381; appl_id="10.0.0.146.19717.091007113413"
4 ETW000 44 1.204435
4 ETW000 [dev trc ,00000] Disconnected from connection 0 75 1.204510
4 ETW000 [dev trc ,00000] statistics db_con_commit (com_total=0, com_tx=0) 116 1.204626
4 ETW000 [dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0) 23 1.204649
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 07.10.2009 - 06:34:14
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Oct 07 06:03:29 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.201)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid SA4
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 201
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 304
M
M kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 304) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
MX <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: running on host mascon-sap2
M calling db_connect ...
*C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf'
C
C &+
C &+
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] (END)
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1451]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10561]*
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server mascon-sap2_SA4_00 on host mascon-sap2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Oct 07 06:03:29 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10781
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 304) [dpnttool.c 333]
Thankyou
Chidam. -
Error message when starting SAP J2EE Engine 6.20
When i am starting SAP J2EE Engine 6.20 i am not able to get the homepage at its startup.
I have checked the Cluster_Log and it says
[OS: Windows XP] [VM vendor: Sun Microsystems Inc.] [VM version: 1.3.1_16-b06] [VM type: Java HotSpot(TM) Client VM]
SAP J2EE Engine Version 6.20 PatchLevel 100897.20 is starting...
Loading: LogManager ...
Loading: R3StartupManager ...
Loading: ThreadManager ...
Loading: TimeoutManager ...
Loading: MemoryManager ...
Loading: PoolManager ...
Loading: PolicyManager ...
Loading: ConnectionsManipulator ...
Loading: IpVerificationManager ...
Loading: ClusterManager ...
Loading: ClassLoaderManager ...
Loading: PortsManager ...
Loading: LockManager ...
Loading: ServiceManager ...
Loading core services:
Starting core service p4 ... done. (297 ms)
Starting core service security ... done. (78 ms)
Starting core service log ... done. (656 ms)
Starting core service admin ... done. (204 ms)
Starting core service monitor ... done. (235 ms)
Core services loaded successfully.
Loading additional services:
Starting service httptunneling ... done. (109 ms)
Starting service jms ... done. (0 ms)
Starting service telnet ... done. (94 ms)
Starting service shell ... done. (250 ms)
ID000544: Error starting service http. Can't start the service due to java.io.IOException: Can't open HTTP server socket on port 80
[ServiceManager]: ID000544: Error starting service http. Can't start the service due to java.io.IOException: Can't open HTTP server socket on port 80
Additional services loaded successfully.
[Framework -> criticalShutdown] [Tue Jul 22 13:44:16 IST 2008] Service http startup error!
Here i can notice "Cant open HTTP server socket on port 80".
How can i do this setting so that everything works fine.Hi
Check that your port 80 is not occupied by other running application (eg. IIS or ITS etc.)
Also check that it may be disabled by antivirus software.
Check the services file that this port is not assigned to other application then
http 80/tcp www www-http -
Help me please! (The WebLogic Server did not start up properly)
bc14.jar;C:\bea\WEBLOG~1\server\lib\wloracle.jar;C:\bea\WEBLOG~1\server\lib\wlsq
lserver.jar;C:\bea\WEBLOG~1\server\lib\wldb2.jar ;C:\bea\WEBLOG~1\server\lib\wl
sybase.jar;C:\bea\WEBLOG~1\server\lib\jConnect.jar;C:\bea\WEBLOG~1\server\lib\wl
informix.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\
ant\ant.jar
PATH=C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\b
ea\WEBLOG~1\server\bin;C:\bea\jdk142_05\jre\bin;C:\bea\jdk142_05\bin;C:\bea\jroc
kit81sp4_142_05\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\mysql\bin;C:\Program File
s\Java\jdk1.5.0\bin;;C:\bea\WEBLOG~1\server\bin\oci920_8;C:\bea\WEBLOG~1\server\
bin\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\[hostname]:[port]\console *
<21.Ara.2004 21:17:08 EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
ic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120
-20041118-1131-win-ia32 from BEA Systems, Inc.>
<21.Ara.2004 21:17:09 EET> <Info> <Configuration Management> <BEA-150016> <This
server is being started as the administration server.>
<21.Ara.2004 21:17:09 EET> <Info> <Management> <BEA-141107> <Version: WebLogic S
erver 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
<21.Ara.2004 21:17:10 EET> <Notice> <Management> <BEA-140005> <Loading domain co
nfiguration from configuration repository at C:\bea\user_projects\domains\jspned
ir\.\config.xml.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.management.configuration.ConfigurationException: Exc
eption thrown in operation getMBeansFromURL - with nested exception:
[javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]'
Reason: weblogic.management.configuration.ConfigurationException: Exception thro
wn in operation getMBeansFromURL - with nested exception:
[javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]
C:\bea\user_projects\domains\jspnedir>bc14.jar;C:\bea\WEBLOG~1\server\lib\wloracle.jar;C:\bea\WEBLOG~1\server\lib\wlsq
lserver.jar;C:\bea\WEBLOG~1\server\lib\wldb2.jar ;C:\bea\WEBLOG~1\server\lib\wl
sybase.jar;C:\bea\WEBLOG~1\server\lib\jConnect.jar;C:\bea\WEBLOG~1\server\lib\wl
informix.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\
ant\ant.jar
PATH=C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\b
ea\WEBLOG~1\server\bin;C:\bea\jdk142_05\jre\bin;C:\bea\jdk142_05\bin;C:\bea\jroc
kit81sp4_142_05\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\mysql\bin;C:\Program File
s\Java\jdk1.5.0\bin;;C:\bea\WEBLOG~1\server\bin\oci920_8;C:\bea\WEBLOG~1\server\
bin\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\[hostname]:[port]\console *
<21.Ara.2004 21:17:08 EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
ic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120
-20041118-1131-win-ia32 from BEA Systems, Inc.>
<21.Ara.2004 21:17:09 EET> <Info> <Configuration Management> <BEA-150016> <This
server is being started as the administration server.>
<21.Ara.2004 21:17:09 EET> <Info> <Management> <BEA-141107> <Version: WebLogic S
erver 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
<21.Ara.2004 21:17:10 EET> <Notice> <Management> <BEA-140005> <Loading domain co
nfiguration from configuration repository at C:\bea\user_projects\domains\jspned
ir\.\config.xml.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.management.configuration.ConfigurationException: Exc
eption thrown in operation getMBeansFromURL - with nested exception:
[javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]'
Reason: weblogic.management.configuration.ConfigurationException: Exception thro
wn in operation getMBeansFromURL - with nested exception:
[javax.management.ServiceNotFoundException: Problems while parsing URL file:/C:/
bea/user_projects/domains/jspnedir/./jspnediradmin/load.mlet]
C:\bea\user_projects\domains\jspnedir> -
Problem in starting SAP liveCache server
Hi,
I am getting the following error message when i tried to start SAP liveCache server with LC10.
"Restart of liveCache LC3 on saplc3cache terminated; reason: User LC3RFC has lock"
Message no. LVC072
Does anyone has idea! abt the error? why it comes and how it can be solved?
Thanks,
VenkatHi Christiane,
The startup procedure is not even reaching the lcinit script. There are absolutly no logs in knldiag and lcinit.log files. After little bit debugging I found the problem. But don't know how to solve it.
The problem occured when I was doing disrptive testing for the liveCache server.
When I kill ("KILL -9 PID") the liveCache server processes (<b>master first and then child</b>) there are some IPC resources hanging over there. These IPC resources (shared memory segments) holds some locks and are preventing the liveCache server to startup.
The problem is not happening when I kill child first and then master process (all the IPCs are getting removed in this case).
I am wondering whether SAP has any tool to remove these IPC resources for liveCache server uniquely for perticular liveCache server (something similar to cleanipc for SAP systems).
I can't write a script to remove all the IPC resources based on the user name ('sdb') which same for liveCache server and MaxDB. (Imagine a case where MaxDB(APO DB) and liveCache server are running together). Any other solutions?
Any answers/suggestions are most welcome.
Thanks,
Venkat -
Problems starting SAP NetWeaver AS Trial Version
Hello Forum,
Here is the summary of problem that I am facing starting SAP Netweaver AS Trial Version (post suucessful installation). I am mentioning successful installation is because on the day of the installation, I could start the NetWeaver AS Server and login using user BCUSER and go into SE80 (Object Navigator). The trouble started appearing thereafter.
Here is the summary -
When I dont have MS loopback Adapter activated on my Laptop, I get the following in SAP MMC
The dispatcher process thread begins but haves a status - cannot connect to the message server
When I install and activate MS loopback Adapter on my Laptop, I get the following in SAP MMC
The Message Server and Dispatcher Starts Off, After a while (a minute), Dispatcher status turns to Message Server COnnection OK, Dialog Queue Time 0:00, after a While (a minute), it gives a message and stops. After this point Message Server is shown as running and Dispatcher is stopped.
I am attaching the dev_disp for reference. Obviously I think the problem lurking somewhere in the midst of Network Adapter Configuration - Please help me to resolve the same.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4808
Tue Oct 27 07:45:11 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4808) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
Tue Oct 27 07:45:15 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >UKCL515803_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F00040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F00040
DpShMCreate: allocated wp_adm at 04F01A28
DpShMCreate: allocated tm_adm_list at 04F032E0
DpShMCreate: allocated tm_adm at 04F03310
DpShMCreate: allocated wp_ca_adm at 052735A0
DpShMCreate: allocated appc_ca_adm at 05273A50
DpShMCreate: allocated comm_adm at 05273F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052F4DB0
DpShMCreate: allocated gw_adm at 052F4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052F4E20
DpShMCreate: allocated wall_adm at 052F4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 27 07:45:16 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( UKCL515803) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >UKCL515803_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Oct 27 07:45:56 2009
MBUF state ACTIVE
ERROR => gateway (pid 5188) died [dpxxdisp.c 15372]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
killing W0-5072 (SIGUSR2)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
killing W1-3868 (SIGUSR2)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
killing W2-5148 (SIGUSR2)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
killing W3-5004 (SIGUSR2)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
killing W4-1640 (SIGUSR2)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
killing W5-4780 (SIGUSR2)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
killing W6-4108 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:06 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 37
wake_evt_udp_now 1
wake events total 37, udp 9 ( 24%), shm 28 ( 75%)
since last update total 37, udp 9 ( 24%), shm 28 ( 75%)
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:11 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >UKCL515803_NSP_00 < (normal)
DpJ2eeDisableRestart
read msgserver-list from MBUF
DpMBufMod: name [UKCL515803_NSP_00 ], types 159 state 3 (0x0 0x0 0x0 0x0)
AdGetSelfIdentRecord: > <
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 1188 bytes
ALLOC local ca_blk 10000 (len 1188)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 38)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:12 2009
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
[DpWpDied] W0 died (PID:5072 HANDLE:1616)
[DpWpDied] W1 died (PID:3868 HANDLE:1612)
[DpWpDied] W2 died (PID:5148 HANDLE:1608)
[DpWpDied] W3 died (PID:5004 HANDLE:1604)
[DpWpDied] W4 died (PID:1640 HANDLE:1600)
[DpWpDied] W5 died (PID:4780 HANDLE:1596)
[DpWpDied] W6 died (PID:4108 HANDLE:1592)
Stop icman
killing process (5208) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 7
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 14 bytes
ALLOC local ca_blk 10001 (len 14)
return errno (-17) to T7
errormsg without overhead: take mode 0
FREE local ca_blk 10001 (len 14)
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
set status of T7 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1556 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1556
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=3)
NiICloseHandle: shutdown and close hdl 4 / sock 1556
NiBufIClose: clear extension for hdl 4
dp_tm_adm[7].stat = DP_SLOT_FREE
DpAMCancel: new state of T7/M0 = 0x19
DpAMCancel: set status of M0 to MODE_CANCEL
DpAMCancel: new state of T7/M7 = 0x8
DpAMCancel: set status of M7 to MODE_CANCEL
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 39)
wake_evt_udp_now 1, no dgram needed
created LOGOFF request for T7 U8 M0 !!
wait for end of work processes
[DpWpDied] W0 handle not set (PID:5072)
[DpWpDied] W1 handle not set (PID:3868)
[DpWpDied] W2 handle not set (PID:5148)
[DpWpDied] W3 handle not set (PID:5004)
[DpWpDied] W4 handle not set (PID:1640)
[DpWpDied] W5 handle not set (PID:4780)
[DpWpDied] W6 handle not set (PID:4108)
wait for end of icman
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:13 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:14 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:15 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:16 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5208 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >UKCL515803_NSP_00 <)
NiIMyHostName: hostname = 'UKCL515803'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Oct 27 07:46:17 2009
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1584 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1584 (pos=2)
SiSelNRemove: removed sock 1584
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c 13116]
NiBufIAlloc: malloc wp ca_blk, to 356 bytes
ALLOC local ca_blk 10001 (len 356)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 42)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1584
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4808) [dpxxdisp.c 10333]
Good Bye .....Hi Sunny,
Thanks for the reply. I checked NETSTAT command and none of the known ports used by SAP is occupied on my laptop.
Also, when I use NIPING - it gies me a familiar message WASNOTREACHED...
I have also attached my IPCONFIG /ALL Output, if somebody could help further.
Windows IP Configuration
1.0.0.127.in-addr.arpa
Record Name . . . . . : 1.0.0.127.in-addr.arpa.
Record Type . . . . . : 12
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
PTR Record . . . . . : localhost
localhost
Record Name . . . . . : localhost
Record Type . . . . . : 1
Time To Live . . . . : 600511
Data Length . . . . . : 4
Section . . . . . . . : Answer
A (Host) Record . . . : 127.0.0.1
C:\Documents and Settings\utxk13>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : UKCL515803
Primary Dns Suffix . . . . . . . : drink.brew.beer
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sn.brew.beer
brew.beer
drink.brew.beer
scottishcourage.com
scottish-newcastle.co.uk
ghodom1.scottish-newcastle.co.uk
heiway.net
nl.heiway.net
Ethernet adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-22-FA-57-5E-D4
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : drink.brew.beer
Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Co
nection
Physical Address. . . . . . . . . : 00-26-55-11-C8-04
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : No
IP Address. . . . . . . . . . . . : 10.10.210.204
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.10.210.1
DHCP Server . . . . . . . . . . . : 10.10.160.167
DNS Servers . . . . . . . . . . . : 10.10.160.38
10.10.236.10
Lease Obtained. . . . . . . . . . : 27 October 2009 08:10:17
Lease Expires . . . . . . . . . . : 31 October 2009 08:10:17
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.10.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Regards
Tushar Kansara -
"Couldn't start this app" error when trying to open Action Items and any other built-in apps
Hi all,
When I try to open the Action Items app within an email in OWA, I get the error seen in the screenshot. In Outlook 2013, the frame comes up with a 404 error.
Third party apps load fine.
This is a new install of Exchange 2013 Enterprise with CU2. Everything else seems to be working fine. I have tried rebooting the server and disabling and re-enabling the apps with no luck. Can't seem to find anything in the Event Log about it.
Any ideas why this would happen and how to fix it?
"Something went wrong and we couldn't start this app"Hi,
Could you please check the IIS log and see what’s the error code?
Try using the administrator account to log in the Outlook and see if he can see the apps successfully.
Thanks,
Simon
If you have feedback for TechNet Subscriber Support, contact
[email protected]
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Problem Starting SAP with Oracle
Dear Experts,
Our production system rebooted due to some electricity issue and since then we are not able to start SAP. We are on oracle 10g and AIX OS. We have done all the options but no avail.
Following is screen output when I run command : "startsap".
startsap
Checking ABC Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 700 - AIX v10.35 5L-64 bit 070123*
Usage: saposcol -l: Start OS Collector*
saposcol -k: Stop OS Collector*
saposcol -d: OS Collector Dialog Mode*
saposcol -s: OS Collector Status*
The OS Collector (PID 884754) is already running .....*
saposcol already running
Running /usr/sap/ABC/SYS/exe/run/startdb
Trying to start ABC database ...
Log file: /home/ABCadm/startdb.log
No SQLNet V2 connect to ABC available.*
Check that the listener is running: "lsnrctl status".
Start the listener as user oraABC: "lsnrctl start".
/usr/sap/ABC/SYS/exe/run/startdb: Terminating with error code 14
DB startup failed
prodserver:ABCadm 2>
Any help & advice to solve this issue will be appreciated.Hi Mark
As I am Novice user, however I have check /oracle/SID/ directory for .sapenv., .dbenv. files but I didn't find any file.
Then I have executed "env" command as a "root", Output is written below.
env
_=/usr/bin/env
MABCATH=/usr/dt/man:/usr/share/man
SESSIONTYPE=dt
DTDATABASESEARCHPATH=//.dt/types,/etc/dt/appconfig/types/%L,/etc/dt/appconfig/types/C,/usr/dt/appconfig/types/%L,/usr/dt/appconfig/types/C
LANG=en_US
LOGIN=root
G_BROKEN_FILENAMES=1
PATH=/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/dt/bin:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
DTUSERSESSION=root-192.168.0.180-0
XMICONBMSEARCHPATH=//.dt/icons/%B%M.bm://.dt/icons/%B%M.pm://.dt/icons/%B:/etc/dt/appconfig/icons/%L/%B%M.bm:/etc/dt/appconfig/icons/%L/%B%M.pm:/etc/dt/appconfig/icons/%L/%B:/etc/dt/appconfig/icons/C/%B%M.bm:/etc/dt/appconfig/icons/C/%B%M.pm:/etc/dt/appconfig/icons/C/%B:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B
SESSION_SVR=atpserver
LC__FASTMSG=true
WINDOWID=23068728
IC_DOCUMENT_SERVER_TYPE=STANDALONE
EDITOR=/usr/dt/bin/dtpad
LOGNAME=root
MAIL=/var/spool/mail/root
DTSCREENSAVERLIST=StartDtscreenSwarm StartDtscreenQix StartDtscreenFlame
StartDtscreenHop StartDtscreenImage StartDtscreenLife StartDtscreenRotor
StartDtscreenPyro StartDtscreenWorm StartDtscreenBlank
IC_DOCUMENT_SERVER_MACHINE_NAME=standalone
LOCPATH=/usr/lib/nls/loc
TERMINAL_EMULATOR=dtterm
USER=root
AUTHSTATE=compat
SAPINST_JRE_HOME=/usr/java14_64/jre
XFORCE_INTERNET=True
DEFAULT_BROWSER=Mozilla
DISPLAY=192.168.0.180:0.0
SHELL=/usr/bin/ksh
ODMDIR=/etc/objrepos
JAVA_HOME=/usr/java14_64
DTAPPSEARCHPATH=//.dt/appmanager:/etc/dt/appconfig/appmanager/%L:/etc/dt/appconfig/appmanager/C:/usr/dt/appconfig/appmanager/%L:/usr/dt/appconfig/appmanager/C
HOME=/
IC_DOCUMENT_SERVER_PORT=64111
IC_DOCUMENT_DIRECTORY=/opt/IBM/aix
XMICONSEARCHPATH=//.dt/icons/%B%M.pm://.dt/icons/%B%M.bm://.dt/icons/%B:/etc/dt/appconfig/icons/%L/%B%M.pm:/etc/dt/appconfig/icons/%L/%B%M.bm:/etc/dt/appconfig/icons/%L/%B:/etc/dt/appconfig/icons/C/%B%M.pm:/etc/dt/appconfig/icons/C/%B%M.bm:/etc/dt/appconfig/icons/C/%B:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B
TERM=dtterm
PWD=/
TZ=INDST+5:30
XMBINDDIR=/usr/dt/lib/bindings
DTHELPSEARCHPATH=//.dt/help/root-192.168.0.180-0/%H://.dt/help/root-192.168.0.18-0/%H.sdl://.dt/help/root-192.168.0.18-0/%H.hv://.dt/help/%H://.dt/help/%H.sdl://.dt/help/%H.hv:/etc/dt/appconfig/help/%L/%H:/etc/dt/appconfig/help/%L/%H.sdl:/etc/dt/appconfig/help/%L/%H.hv:/etc/dt/appconfig/help/C/%H:/etc/dt/appconfig/help/C/%H.sdl:/etc/dt/appconfig/help/C/%H.hv:/usr/dt/appconfig/help/%L/%H:/usr/dt/appconfig/help/%L/%H.sdl:/usr/dt/appconfig/help/%L/%H.hv:/usr/dt/appconfig/help/C/%H:/usr/dt/appconfig/help/C/%H.sdl:/usr/dt/appconfig/help/C/%H.hv
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/usr/dt/nls/msg/%L/%N.cat:/usr/dt/lib/nls/msg/%L/%N.cat:/usr/dt/lib/nls/msg/%l/%t/%c/%N.cat:/usr/dt/lib/nls/msg/%l/%c/%N.cat
If you need I will send you output of "env" command as a "ora<SID>" & <SID>adm
Thanks for all your support -
The WebLogic Server did not start up properly.
Hi Everybody,
I am quite new in BEA product, actually with weblogic integration. I get an issue when I tried to start Weblogic integration.
I used Weblogic integration 8.5 on my Windows box and JDK 1.4.
When I tried to start it I get the folowing error:
The WebLogic Server did not start up properly.
java.io.InvalidClassException: javax.management.MBeanAttributeInfo; local class
incompatible: stream classdesc serialVersionUID = 7043855487133450673, local cla
ss serialVersionUID = 8644704819898565848
at java.io.ObjectStreamClass.initNonProxy(Ljava.io.ObjectStreamClass;Lja
va.lang.Class;Ljava.lang.ClassNotFoundException;Ljava.io.ObjectStreamClass;)V(Un
known Source)
at java.io.ObjectInputStream.readNonProxyDesc(Z)Ljava.io.ObjectStreamCla
ss;(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Z)Ljava.io.ObjectStreamClass;
(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Z)Ljava.io.ObjectStreamCla
ss;(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Z)Ljava.io.ObjectStreamClass;
(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unk
nown Source)
at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
urce)
at java.io.ObjectInputStream.readArray(Z)Ljava.lang.Object;(Unknown Sour
ce)
at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
urce)
at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
o.ObjectStreamClass;)V(Unknown Source)
at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
bjectStreamClass;)V(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unk
nown Source)
at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown So
urce)
at java.io.ObjectInputStream.readObject()Ljava.lang.Object;(Unknown Sour
ce)
at weblogic.management.internal.TypesHelper.getMBeanInfo(TypesHelper.jav
a:274)
at weblogic.management.internal.TypesHelper.getAdminOrConfigMBeanInfo(Ty
pesHelper.java:384)
at weblogic.management.internal.ConfigurationMBeanImpl.<init>(Configurat
ionMBeanImpl.java:137)
at weblogic.management.AdminServer.<init>(AdminServer.java:59)
at weblogic.management.AdminServerAdmin.initialize(AdminServerAdmin.java
:245)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:770)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
Do you have some idea why I get this error while starting the server?
Thank you in advance!First you can start witht he example server, after installation go to start menu --> example--> launch the examples. which will create a sample domain and brings up the server etc., If you want your own domain, using configuration wizard create a domain(follow the steps mentioned in edocs.bea.com) and bring up the server.
-sadiga
Maybe you are looking for
-
Installation Failed InDesign CC on mac 10.8.4
I am unable to install CC apps and getting Instalation Failed msg, administrator privileges are required to install msg in Adobe Application Manager , does anyone knows how to troubleshoot it , thanks?
-
Iphoto 6 deleted my whole library
I just upgraded iphoto 6 and when i opened iphoto all my pictures had been deleted, how do i get all my pictures back on iphoto? I have an ipod that has all the pictures from iphoto on there, but is there a way i can put pictures from my ipod to my i
-
Error FSL-02015 in Installing 4.7 IDES
TRACE searching for task files with basename SAPVIEW in C:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB TRACE no usable task file TRACE trying to insert package SAPVIEW.STR TRACE checking directory E:/Exp4/EXPORT5 ERROR 2005-08-23 13:17:42 MS
-
Desk Jet 810C Not Printing Magenta
I need some troubleshooting help. Months ago, my black ink cartridge started to empty and the printer started using reds or blues. I replaced the black cartridge with a refurbished one from Office Max. All worked fine. The color cartridge started t
-
Problem with faux column and 100% min height
hello i',m trying to create a faux column on this page: http://www.malcmabe.co.uk/listtest.html. the column i'm trying to do is the left hand side menu column. i just can't get this to work, so i'm obviousley missing something. also, i've set the wra