SAPINST 4.7 with MS SQL SERVER Error "Unable to stop server"

I'm trying to install SAP 4.7 on
- Windows 2003 Server _ host "tpt"
- SQL Server 2000 SP3 _ new Instance "MYSAP". Collation is already set to "SQL_Latin1_General_CP850_BIN2".
Sapinst ran well on all input data steps.
Next it applied from steps
"Create SAP System Opertion System Groups and Users"
"Check/Adapt File System"
until step "MS SQL SERVER tempdb Parameters" with Processing message "Changing location of
tempdb files", then stopped the installation.
I've got Error_Log file:
Transaction begin ********************************************************
INFO 2004-09-19 10:21:24
Successfully connected to "tpt\MYSAP"
ERROR 2004-09-19 10:21:25
MDB-05039 Unable to stop server "tpt\MYSAP"; error: "[Microsoft][ODBC SQL Server Driver][SQL Server]Herunterfahren des Servers auf Anforderung. (german text means "Server shuts down on request")
[Microsoft][ODBC SQL Server Driver][SQL Server]SQL Server beendet diesen Prozess." (german text means "SQL Server stops this process")
ERROR 2004-09-19 10:21:25
MDB-05034 Call to a threaded function returned "1".
Transaction end **********************************************************
WARNING 2004-09-19 10:30:21
The step doChangeTempDBParameters1 with step key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseServer|windows|ind|mss|ind|ind|0|TempDB|windows|ind|mss|ind|ind|0|doChangeTempDBParameters1 executed with status ERROR.
WARNING 2004-09-19 10:30:21
An error occurred during the installation.
Can you help me?
Thanks very much
thanh

Hello,
you should not use a german version of MS SQL Server.
Regards
Gregor

Similar Messages

Server Error 503: SC_SERVICE_UNAVAILABLE: HTTP server is temporarily overlo

Hi
The wrong is that :
Server Error 503: SC_SERVICE_UNAVAILABLE: HTTP server is temporarily overloaded, and unable
I'd like some information about it.
In my application i don't have pool connection and it's in production right now, my boubt is: Can i have problem of slowness in some process?
Because sometimes i have slowness in some process and sometimes i don't have.
I belive that happen when my server is overloaded,
when isn't overloaded the process run ok.
If i implent the pool the connection at application Can solve the problem?
Thanks
Jose Vieira

I think we'll need some more information.
Let's start with your working environment (development mode + autodeployment). Now if you change to deploying it yourself does it still work? If not, please give me more details on exactly how you're deploying it.
Also, can you show me the server log, especially any messages or errors around your application's deployment.
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

What does this mean? Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.

This is the error that we get when we run the Tag File.
ERROR 04/16/2004 02:26:15 PM Server ERROR from Server: National Instruments.OPCLookoutDrivers. Status: -196608, Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.
What does it all mean?

ACRE,
this looks like the Industrial Automation OPC Server (Lookout OPC) is not correctly installed or configured and therefore the DSC Tag Engine - as OPC client - cannot launch the OPC server correctly.
Two checks I have in mind.
- Installation check: Check if the Industrial Automation Server is installed and configured correctly and that you will have a .lpd file as default. Could it be that the .lpd file is corrupted? BTW - what kind of protocol are you using and did you configure aliases for the LPD object? A good resource on checking the configuration might be the online help of Industrial Automation Server (Lookout Protocol Drivers) or the link penDocument>How Do I Configure My Devices with Lookout Protocol Drivers?
- Access rights, COM/DCOM problems: Can you launch the OPC Server with another OPC client? Is your OPC server running locally? If you don't know how to check on this I found a good KB Tools for Troubleshooting OPC Interface Problems E.g. can you access it with Server Explorer?
Last question... did you encounter this problem recently while it was working before? What changes have been done on your system?
Let us know if you have some questions and I hope some of the links help you further troubleshooting this issue.
Roland

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

Have you tried deleting the account and re-adding it on the phone?
What version of Exchange server are you running?

Server error in printing in server using crystal report 2008 with VS2008

Hi,
We are using Crystal report 2008 in VS 2008. Everything working fine in local but when we deployed it in the server we are getting the below while print the report.
"An error occurred on the server. Printing will be stopped. Would you like to view the error information"
Anyhow the report is printing but I don't know why this error is occur and how to stop this. I had installed the CR runtime in the server. I dont know what is going wrong. The same we tested locally in a non crystal report installed PC.
Please help me to get rid out of this error.
Thanks
Natraj

Soemthing strange going on here.
Typically this Integrated vs Classic is an issue with images where Classic uses web.config tags between <system.web><httpHandlers><u2026 crystalimagehandler../></httphandlers></system.web>
Integrated uses tags between <system.webserver>u2026<handlers><..crystalimagehandler/></handlers></system.webserver>
Not sure why this would affect printing. Do you have tags that specifying where to download the printcontrol from? On the other hand, I would think that if images had anything to do with it, then you'd get red Xs when viewing. As far as I know, the printcontrol.cab doesnu2019t need to be specified in the <system.webserver> tags.
This one may be best resolved over the phone. Phone support can be obtained here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Ludek

500 Internal Server Error - Unable to run a custom page from JDEV 10.1.3...

Hi
I am trying to run a Custom page from my JDEV. But i am getting the following error.
*500 Internal Server Error*
oracle.apps.fnd.cache.CacheException
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
Caused by: oracle.apps.jtf.base.resources.FrameworkException:
An exception occurred in the method CacheAccess.getnullThe base exception is:
Not able to create new database connection: FNDSECURITY_APPL_SERVER_ID
at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
.... 54 more
I have checked the DBC file. The APPS_JDBC_URL was containing "\". I tried removing that but it dint worked. I checked whether i am using the right version of the JDEV patch, no issues with that also.
Kindly let me know the solution.
Thanks.
Edited by: user605470 on May 23, 2009 5:39 PM

Anoop
DBC file is not having any issues. Domain name seems to be correct.
DBC File
#DB Settings
#Fri Dec 19 12:54:03 EST 2008
GUEST_USER_PWD=GUEST/ORACLE
APPL_SERVER_ID=5D03027668AF2054E043A8920BA0205451873975540904546222829851405157
FND_JDBC_BUFFER_DECAY_INTERVAL=300
APPS_JDBC_DRIVER_TYPE=THIN
FND_JDBC_BUFFER_MIN=1
GWYUID=APPLSYSPUB/PUB
FND_JDBC_BUFFER_MAX=5
APPS_JDBC_URL=jdbc\:oracle\:thin\:@(DESCRIPTION\=(ADDRESS_LIST\=(LOAD_BALANCE\=YES)(FAILOVER\=YES)(ADDRESS\=(PROTOCOL\=tcp)(HOST\=<Host Name>)(PORT\=<Port #>)))(CONNECT_DATA\=(SERVICE_NAME\=<Instance Name>)))
FND_JDBC_STMT_CACHE_SIZE=100
TWO_TASK=<Instance Name>
JDBC\:processEscapes=true
FND_MAX_JDBC_CONNECTIONS=500
FND_JDBC_USABLE_CHECK=false
FNDNAM=APPS
FND_JDBC_PLSQL_RESET=false
DB_PORT=<Port #>
FND_JDBC_CONTEXT_CHECK=true
FND_JDBC_BUFFER_DECAY_SIZE=5
DB_HOST=<Host Name>
This is my DBC files. I have verified the values of <Host Name>, <Port #> and <Instance Name>. The seems to be correct. Is my error is related to the line which is highlighted ? Any inputs will be appreciated.
Thanks.
Edited by: user605470 on May 25, 2009 9:00 AM

500 Internal Server Error - Unable to run a custom page from JDEV 10.1.3.3.

Hi
I am trying to run a Custom page from my JDEV. But i am getting the following error.
*500 Internal Server Error*
oracle.apps.fnd.cache.CacheException
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
Caused by: oracle.apps.jtf.base.resources.FrameworkException:
An exception occurred in the method CacheAccess.getnullThe base exception is:
Not able to create new database connection: FNDSECURITY_APPL_SERVER_ID
at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
.... 54 more
I have checked the DBC file. The APPS_JDBC_URL was containing "\". I tried removing that but it dint worked. I checked whether i am using the right version of the JDEV patch, no issues with that also.
Kindly let me know the solution.
Thanks.
Edited by: user605470 on May 23, 2009 5:27 PM

User,
You are not running JDEV, but OA Framework, hence you should use the OA Framework Forum to ask.
John

Http 500 internal server error unable to open CCM admin page

When i install CCM 4.1.2 the admin page was opening without having any problems. Eventually CCM admin page is not opening.
=======================================
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Open the fasi home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer
=========================================Any particular reason

Thanks for Reply; the page is https its not opening https://fasi/CCMAdmin/Main.asp
How do i check the proxies?
I can see there is red error icon on IISAdmin.

Import Server - Error in connecting Import Server

hi Team,
One of our business application integrated with MDM getting error as "Error in connection Import Server".
As i checked all the repositories and they are all active/online.
Please advise what all the place/items to cross very and take necessary actions accordingly.
Thanks
Sekhar

Hi Sekhar,
Go to Services.msc in the system where your MDM servers are installed and restart the MDM Import server service.
Then try connecting again.
Your error message basiaclly points out that you are using Automatic import but as your MDIS server is not up and running the importing cannot be performed.
So make sure your MDIS is functioning properly and you have made the necessary settings in your MDIS.ini file and port property in console for correct importing.
You can check the mdis settings needed in the below path:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm
(Automatic importing MDIS - Import manager ref guide>MDM import server(MDIS)>MDIS Consfiguration)
The port in MDM Console must have processing type as Automatic and the correct map attached.
Hope It Helped
Thanks & Regards
Simona Pinto

Crystal Reports Server Error - Unable to cast object of type

Hi Everyone,
Not sure if this is the right place to post this question but couldn't find a Crystal Reports Server section.
After doing a windows update on my crystal reports server the following error now occurs when trying to log into .Net InfoView -
An error has occurred: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'BusinessObjects.Enterprise.Desktop.InfoView'.
I found the following article which I followed and re-installed the .net components as well as ensured all services are enabled.
Article: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303335333433323337%7D.do
The error still occurs.
I did some further investigation and found that a similar error occurs in the Admin Console when I try and open the Crystal Report DataSources.
This is the error page that comes up
Server Error in '/businessobjects/Enterprise11/WebTools' Application.
Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.
+Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information
about the error and where it originated in the code.+
+Exception Details: System.InvalidCastException:
Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.+
Source Error:
+The source code that generated this unhandled exception can only be shown when compiled in debug mode.
To enable this, please follow one of the below steps, then request the URL:+
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
 <system.web>
 <compilation debug="true"/>
 </system.web>
</configuration>
+Note that this second technique will cause all files within a given application to be compiled in debug mode.
The first technique will cause only that particular file to be compiled in debug mode.+
+Important: Running applications in debug mode does incur a memory/performance overhead.
You should make sure that an application has debugging disabled before deploying into production scenario.+
Stack Trace:
InvalidCastException: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.
 +CrystalDecisions.Enterprise.WebContent.WebSamples.DataSources.Common.datasourceInfoFromReports(ArrayList reports) 226
 +CrystalDecisions.Enterprise.WebContent.WebSamples.DataSources.Datasources.Main() 1821
 +ASP.websamples_datasources_datasources_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) 531
 +System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) 98
 +System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) 20
 +System.Web.UI.Page.Render(HtmlTextWriter writer) 26
 +System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) 25
 +System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) 121
 +System.Web.UI.Control.RenderControl(HtmlTextWriter writer) 22
 +System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 2558
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
Any information on how I can fix this is greatly appreciated.
Regards
Paul
Edited by: Paul Griscti on Sep 3, 2008 2:52 AM

I'd try creating a new Application Pool just for running businessobjects and crystalreportviewers11 and nothing else.
Although the apps are .NET, it uses COM Interop for functionality, so using a common app pool with other versions will collide.
Beyond that - if you have a SAP Business Objects support contract - you might open a new SAP Incident ticket.
Sincerely,
Ted Ueda

Internal Server Error after upgrading to Server 4

HI, I've updated my Mac Mini server to Yosemite and downloaded Server 4. I'm now getting an error:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
I'm running SSL, so it could be related to a certificate problem but the IP and name hasn't changed.
Any thoughts or suggestion appreciated.
Thanks
David

I was able to revert to Mavericks via Time Machine (OS X Mavericks: Revert to a previous OS X version) so I'll leave it for awhile. I notice someone else having an issue with SSL and the OS/Server. I shouldn't have jumped in so quickly ;-). Hard to test with a certificate. My desktop machine started up server without a problem but it must have used a local certificate. Thanks for the interest.

Cannot send mail from newsletter server and Server error: Unable to relay

We have newsletter server. Sometimes we sent mail by our exchange 2010 server. But recently we are unable to send mail to external mail server. we sent mail by newsletter server within a domain now. We need to solve. Pls. check below log file and provide
how to solve it.
Sender ID: [email protected]
our domain: www.silkways.net
LOG:
Status Msg : The email details entered successfully into the database.
Status Msg : The email details entered successfully into the database.
Access Level : 1
MAIL SENT TO : [email protected]
FAILED TO SEND MAIL TO : [email protected]
Error : SMTP Error: The following recipients failed: [email protected]SMTP server error: 5.7.1 Unable to relay

FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]SMTP server error: 5.5.2 Sender already specified

FAILED TO SEND MAIL TO : [email protected]
Error : SMTP Error: The following recipients failed: [email protected]SMTP server error: 5.7.1 Unable to relay

FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]SMTP server error: 5.5.2 Sender already specified

FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]SMTP server error: 4.7.0 Too many errors on this connection, closing transmission channel

FAILED TO SEND MAIL TO : [email protected]
Error : SMTP Error: The following recipients failed: [email protected]SMTP server error: 5.7.1 Unable to relay

FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]SMTP server error: 5.5.2 Sender already specified


Hi,
Since you are able to send emails to internal domain i assume the application server IP address already allowed into Receive Connector.
To relay application emails to external domain you should enable Externally Secured box in the Authentication Tab of the particular Receive Connector.
Kottees :My Blog Please mark it as an answer if it really helps you.

HTTP error: 500 (Internal Server Error) while creating content server repst

Hi All,
I am getting the HTTP error as mentioned below,
HTTP error: 500 (Internal Server Error)"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver
Manager] Data s
My content server is running on a Microsoft Cluster Environment.
I tried to follow the steps in the SAP note 301352.
Please help me in registering the LiveCache ODBC driver.
When i excute the the odbcreg.exe file i get the foll,
E:\sapdb\programs\pgm>odbcreg.exe
DriverName=MaxDB
Driver=e:\sapdb\programs\pgm\sqlod32.dll
Setup=e:\sapdb\programs\pgm\sqlsp32.dll
Version=7.6.0.0
Please help me in registering the Livecache ODBC driver.
Expecting your kind reply.
Vineeth

hi Vineeth Damodar
do it in command prompt.
change the drive letter ...where u install the sapdb.
D:\odbcreg LiveCache -i -p d:\sapdb\programs\pgm
it will prompt that LIvecache is registred. Restart the server.
then check in control panel...
The LiveCache ODBC driver should then be registered in the Control Panel -> ODBC Drivers -> Driver tab
-- Lee
rewared points .. if it helpful for u....

Internal Server Error while using Frontpage Server Extension on SharePoint2013

I am working on a Proof of concept where I am trying to use Frontpage server Extension - RPC protocol to upload the files in sharepoint document library using "/_vti_bin/_vti_aut/author.dll". I am using following URL to upload bytes to SharePoint
Document library.
http://SPServer/Site/_vti_bin/_vti_aut/author.dll?method={0}&service_name=put+document&document=[document_name=<Encoded document path>;meta_info=[]]&put_option=overwrite,migrationsemantics&keep_checked_out=false&comment=
The same code works on one sharepoint environment but not on other. I am getting Internal Server Error (500) exactly when i try to execute the webrequest.GetResponse for the url given above.
Any pointers will be greatly appretiated.
Regards,
Indra

Hi,
According to your description, my understanding is that when you use the Front Server Extension to upload the files, it occur the error "Internal Server Error(500)".
As in your another environment, it works fine, for a better troubleshooting, I suggest you can do as the followings:
1. Using Fiddler to check the web request which occurs error to find the detailed error message and you can compare if there are something difference between the two environments.
2. Check the Windows server event log to check if there are something error message in it.
Here is a detailed article about troubleshooting solutions:
how to solve Web Service call failed error
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SAPINST 4.7 with MS SQL SERVER Error "Unable to stop server"

Similar Messages

Maybe you are looking for