Sapinst login timeout during installation of NetWeaver 2004s
Hello,
I want to install a new NetWeaver 2004s system using sapinst.
The Gui starts but after some seconds the connection breaks with the following error.
Starting GuiServer using:
/opt/IBMJava2-amd64-142/bin/java -cp /usr/sap/put/Install_/sapinst_exe.1789.1199282891/JAR/instgui.jar:/usr/sap/put/Install/sapinst_exe.1789.1199282891/JAR/inqmyxml.jar -Djava.security.egd=file:/dev/urandom SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool /usr/sap/stage/PORTAL/BS_2005_SR2_SAP_Installation_Master/IM_LINUX_X86_64/resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host , port 21200 to continue with the installation
guiengine: login in process.
guiengine: login timeout; the client was unable to establish a valid connection
I used an other port but I got the same error. The only thing which helps is a reboot of the server.
The operating system is LINUX.
Any ideas?
Thank you.
Best Regards
Ines
Hi Ines,
I think you're missing the DISPLAY environment variable.
set DISPLAY <IP_of_your_pc>:0.0
make sure your Xserver is up and running.
That should solve your problem
Regards
Juan
Similar Messages
-
Error occured during installation SAP Netweaver 2004s ABAP Trial Version
Hi,
during the installation an error occurred.
log.txt:
(Dec 17, 2006 9:47:57 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Dec 17, 2006 9:47:57 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/JRGENS1/LOKALE~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/JRGENS1/LOKALE~1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
I've run RegCleanTool and rerun the installer, result: the same error.
System specs:
Windows XP SP2
Hardware. AMD Athlon XP 3200+, 2,19 GHz, 1,25 GB Ram
The MS Loopback Adapter is correctly installed and ping on permanent IP adress 10.10.0.10 returns ok.
What's wrong?Hello,
Try to install the MaxDB software manually, then continue with the installation of SAP Netweaver. Check whether there is any another entry of same SID into NSP? if yes then use any another SID for Netweaver system.
Best Regards,
Sachin -
Error while creating database instance in installation of Netweaver 2004s
Error in Installation-SAP Netweaver 2004s on AIX 5.3 usingMaxDB as database
I have pasted error log below.
Please Help.
ERROR 2007-03-09 13:48:53
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2007-03-09 13:48:53
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2007-03-09 13:48:53
FCO-00011 The step sdb_init_instance_type with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|3|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_init_instance_type was executed with status ERROR .Hi
Please help.
XCMDOUT.LOG shows the following things:
> Subprocess starts at 20070309134754
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134759
OK
7.6.00.35 /sapdb/IND/db
> Subprocess starts at 20070309134804
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134805
OK
7.6.00.35 /sapdb/IND/db
> Subprocess starts at 20070309134806
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134806
OK
7.6.00.35 /sapdb/IND/db
> Subprocess starts at 20070309134806
Execute Command : /sapdb/programs/bin/dbmcli -R /sapdb/IND/db dbm_version
Start subprocess as user with uid: root
> Subprocess stops at 20070309134807
OK
VERSION = 7.6.00
BUILD = DBMServer 7.6.00 Build 035-123-139-084
OS = UNIX
INSTROOT = /sapdb/IND/db
LOGON = True
CODE = ASCII
SWAP = normal
UNICODE = (unknown)
INSTANCE = (unknown)
SYSNAME = AIX
> Subprocess starts at 20070309134807
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134808
OK
7.6.00.35 /sapdb/IND/db
> Subprocess starts at 20070309134827
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134828
OK
7.6.00.35 /sapdb/IND/db
> Subprocess starts at 20070309134833
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070309134836
OK
IND /sapdb/IND/db 7.6.00.35 fast running
IND /sapdb/IND/db 7.6.00.35 quick offline
IND /sapdb/IND/db 7.6.00.35 slow offline
IND /sapdb/IND/db 7.6.00.35 test offline
> Subprocess starts at 20070309134842
Execute Command : /sapdb/programs/bin/dbmcli -n punlparidm06 -d IND -u CONTROL,********
Start subprocess as user with uid: root
Execute Session Command : param_startsession
Execute Session Command : param_init OLTP
> Subprocess stops at 20070309134853
OK
ERR
-24976,ERR_PARAMEXIST: param file of database already exists -
I need help regarding installation of Netweaver 2004s
Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
guistart : true
command : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver. -
Error during installing SAP Netweaver 2004s WEB AS JAva (SR3)
Hello Gurus,
I am installing SAP Netweaver 2004s Web AS Java on Oracle Database 10g and HP-UX (PA-RISC 10.23).
During installation ,in Configure UME phase iam facing an error ,due to which the installation is stuck in between. The extracted error trace of sapinst.log file is as follows:
ERROR 2008-10-28 17:21:53.387 [sixxcstepexecute.cpp:951]
FCO-00011 The step runUMConfigurator with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Standalone|ind|ind|ind|ind|0|0|runUMConfigurator was executed with
status ERROR ( Last error reported by the step :Java EE Engine
configuration error. DIAGNOSIS: See output of logfile
umconfigurator.log: '
Oct 28, 2008 5:21:51 PM Info: UME configurator
(com.sap.security.tools.UMConfiguratorLoad) called for action "setup"
Oct 28, 2008 5:21:52 PM Error: main()
[EXCEPTION]
java.lang.NoClassDefFoundError:
com/sap/engine/lib/util/cache/CacheListener
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at com.sap.engine.offline.FileClassLoader.findClass
(FileClassLoader.java:702)
at com.sap.engine.offline.FileClassLoader.loadClass
(FileClassLoader.java:600)
at com.sap.engine.offline.FileClassLoader.loadClass
(FileClassLoader.java:578)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302) at
com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>
(ConfigurationCache.java:114)
at
com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at
com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:60)
at com.sap.security.tools.UMConfigModel.<init>
(UMConfigModel.java:79)
at com.sap.security.tools.UMConfiguratorLoad.main
(UMConfiguratorLoad.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main
(OfflineToolStart.java:81)
Oct 28, 2008 5:21:52 PM Info: Leaving with return code 99 '.).
All variable environment are set correctly (JAVA_HOME, SAPINST_JAVA_HOME).
Java version is Java version is Java HotSpot(TM) Server VM (build 1.4.2 1.4.2.13-070317-15:01-PA_RISC2.0 PA2.0 (aCC_AP), mixed mode)
Someone plz help me out wt is this error .
Regards,
ChristianHi Martin,
The file umconfigurator.log
Oct 29, 2008 12:19:47... Info: UME configurator (com.sap.security.tools.UMConfiguratorLoad) called for action "setup"
Oct 29, 2008 12:19:48... Error: main()
[EXCEPTION]
java.lang.NoClassDefFoundError: com/sap/engine/lib/util/cache/CacheListener
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:702)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:114)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:60)
at com.sap.security.tools.UMConfigModel.<init>(UMConfigModel.java:79)
at com.sap.security.tools.UMConfiguratorLoad.main(UMConfiguratorLoad.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Oct 29, 2008 12:19:48... Info: Leaving with return code 99
Thanks
Christian -
Installation Error (Netweaver 2004s ABAP Trial)
Hi all!
I can't install the ABAP trial version of NetWeaver 2004's. Every time the installation stops at 30-40%. Before each installation i am running the regclean Tool, because i've read in one thread that this error could be caused by registry entries of a previous installation. But after that the error still appears. If someone can help me on that, i will be glad.
My operation system is Windows XP (Media Center Edition / Version 2002) SP2 and i've configured a MS Loopback Adapter.
Here's what the log.txt says:
(Apr 28, 2007 5:13:47 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Apr 28, 2007 5:13:47 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/ich/LOKALE1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/ich/LOKALE1/Temp/MaxDBSAPNWPREV.log")
Here's what the MaxDBSAPNWPREV.log (a cutout) says:
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: starting installation phase of package SQLDBC 76 7.6.00.36 32 bit
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: -
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst:
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SQLDBC76.TGZ"
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 pgm/
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: -rwxr-xr-x 1073152 2006-11-21 00:02:25 pgm/libSQLDBC76.dll
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/sqldbc/
Sat Apr 28 17:13:46 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 sdk/sqldbc/lib/
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 80738 2006-11-21 00:02:25 sdk/sqldbc/lib/libSQLDBC76.lib
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: extracting: drwxr-xr-x 0 2006-11-21 01:13:02 symbols/
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: extracting: -rw-rr 3951616 2006-11-21 00:02:25 symbols/libSQLDBC76.pdb
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: checking unpacked archive... ok
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: installation of MaxDB Software finished successfully Sa, Apr 28, 2007 at 17:13:46
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: creating database NSP...
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: ERROR: Backup check for 'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave
Sat Apr 28 17:13:47 CEST 2007 MaxDB sdbinst: installation exited abnormally at Sa, Apr 28, 2007 at 17:13:46
Sat Apr 28 17:13:47 CEST 2007 MaxDB: Error during call to sdbinst, rc= 1
Sat Apr 28 17:13:47 CEST 2007 MaxDB: Done with call_sdbinst
Sat Apr 28 17:13:47 CEST 2007 MaxDB: rc of sdbinst = 1
Sat Apr 28 17:13:48 CEST 2007 MaxDB: Start of CallSdbuninst
Sat Apr 28 17:13:48 CEST 2007 MaxDB: IndepProgPath: c:/sapdb/programs
Sat Apr 28 17:13:48 CEST 2007 MaxDB: dbmcli path: c:/sapdb/programs/pgm/dbmcli.exe
Sat Apr 28 17:13:48 CEST 2007 MaxDB: Calling check for db_enum in case of an abort
Sat Apr 28 17:13:48 CEST 2007 MaxDB: nsp doesn't exist. Nothing to do !
Sat Apr 28 17:13:48 CEST 2007 MaxDB: rc of Method: 3
Sat Apr 28 17:13:48 CEST 2007 MaxDB: IndepProgPath = c:/sapdb/programs
MaxDB: dbmcli_path = c:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :NSP:
MaxDB: Instroot of NSP is: null
MaxDB: sdbuninst_option = :3
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Sat Apr 28 17:13:48 CEST 2007 MaxDB: End of CallSdbuninst
Sat Apr 28 17:13:48 CEST 2007 MaxDB: End of uninstallation
ThanksHello all
a.) my hard disk is of type NTFS
b.) Second: this is the error log:
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst: starting preparing phase of package SQLDBC 76 7.6.00.36 32 bit
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst: -
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst:
Tue May 29 21:21:06 CEST 2007 MaxDB sdbinst: same package already installed
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: checking consistence of package data in install registry...
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: check files... ok
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: skipping package
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: installation of MaxDB Software finished successfully Tu, May 29, 2007 at 21:21:06
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: creating database NSP...
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: ERROR: Backup check for 'C:sapdbNSP\_tempLocationloadload_datasave' failed:
Tue May 29 21:21:07 CEST 2007 MaxDB sdbinst: File not found: C:sapdbNSP\_tempLocationloadload_datasave
Therefore it seems to be exactly the same as mentioned in this Thread
c.) Before I installed the ABAP trial Netweaver SP11 version I used the SP8 version sucessfully which has been available since I believe December using the same hard ware equipment. I was able to install the former version (with same problems) on the same hard disk using the same operating system (by the way Windows XP SP2)
d.) Somebody asked there to find the downloads: general take a look at
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
e.) I have "surfed" a little bit in the internet and it seems to be that this error is well known but the solution proposed (matter of size of hard disk drive or matter of fact of size of memory installed) seems to be incorrect
The some problem has been discribed here:
http://www.sapfans.com/forums/viewtopic.php?=&p=791329
http://www.mundosap.com/foro/printthread.php?t=5177&page=2&pp=10
NW2004s ABAP Trial Version error code = 601
Up to know I found no suitable solution to get rid of the problem as I have really (in my opinion) a suitable hardware (big hard disk; 1 GB RAM etc.)
Christoph
PS: I am still a novice in using the techniques in the threads (questioning; giving points; replaying etc.) used herein. So sorry for that If my usage might be incorrect or not perfect or.. . -
ADS Installation on Netweaver 2004s
Hello,
I managed to download the 51032260_11.zip from service.sap.com and configuration guide. Whats the other zip file I need to download ?.
Can somebody point me to ADS installation Guide on 2004s also.
Thanks.
Sunita.Hi Dezso,
thanks for reply. I havent started the configuration yet. What do u mean by "part of standard installation"?. We have J2EE Engine installed. I dont even have installation guide. Could you please guide on where to start?. One more thing I have downloaded adobe credentials file for 2004, can I use it for 2004s also?.
Thanks,
Sunita -
Problem during installation of NetWeaver 7.1 Trail version
Hi,
i am a just new brown baby in the field of NetWeaver 7.1. I download trial version of net weaver 7.1 from the SDN.SAP download portion. While logging got the following error:
"WSAECONNREFUSER : Connation refused".
I donu2019t have any version of SAP and can I use the NetWeaver without SAP on my network. I want to use the NetWeaver only for the Academic purpose only.
Thanks and best regards,
Muhammad Usman
Edited by: Muhammad Usman on Feb 23, 2009 2:44 PMHi
Follow [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0e9cc7b-0469-2a10-d3a8-f4f04b30fb0b]
Best Regards
Satish Kumar -
Problem in installation SAP Netweaver 2004s
Hi to all,
When I install SAP NetWeaver Developer Studio 7.0.09 appears the following error:
<i>The SAP NetWeaver Developer Studio 7.0.09 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
Click Finish to exit the wizard. For detailed error descriptions, please open file://C:\ARCHIV1\SAPINS1\NW04S\SYSTEM\DEVSTU1\ide_sar.tmp\J2EE-R1\IDE\setup\saplogvw.exe .
<b>The following program files could not be registered:
c:\windows\system32\librfc32.dll</b>
The installed applications may not function correctly until all program files are successfully installed.</i>
Can I help me about this?
Thanks a lot.Hi,
Do you have the admin rights on the system?
To register this dll you can use
Syntax
REGSVR32 </u> [/S] [/C] [/I:[Command_Line]] DLL_Name
REGSVR32 </u> [/S] [/C] /N /I:[Command_Line] DLL_Name
Key
/u Unregister Server.
/s Silent - no dialogue boxes.
/c Console output.
/n Don't call DllRegisterServer
/i Call DllInstall (or DllUninstall if /u is specified)
Command_Line An optional command line for DllInstall
Ex:
REGSVR32 "c:\windows\system32\librfc32.dll"
Regards
Ayyapparaj -
Netweaver 2004S Installation stops in phase 'Create Java Users'.
Hi,
We have an error in the installation of Netweaver 2004s on an Solaris X64 10 (64 bit). We have j2sdk1.4.2_13 (32 bit installed)
In phase 'Create Java Users' , we receive the following error in dev_UserCheck.clone :
'*** ERROR => DlLoadLib: dlopen()= ld.so.1: jlaunch:
fatal: /usr/j2se/jre/lib/i386/server/libjvm.so: wrong ELF class:
ELFCLASS32 -> DLENOACCESS (0,Error 0) [dlux_mt.c 314]
[Thr 4] *** ERROR => Can't load VM shared library (libjvm.so) (rc=-2)
[jhvmxx_mt.c 1576]'
I think this is an java error.
We can't find a download for the 64 supplementation package for solaris
X64. Is this supported?
Kind regards,
Serge SchellesHi Serge,
I'm no Solaris expert, but if I'm not mistaken, JRE and JDK versions for the X64 platform are only available as of version 1.5. It's worth a try, you can run them both at the same time on the same server. Just point your JAVA_HOME to the 1.5 directory after installation and start SAPinst again.
Good luck!
Henk. -
Solution Manager can't generate installation key for Netweaver 2004s
I am trying to generate installation key for a new installation of
Netweaver 2004s or 7.0 and the Solution Manager only display SAP ECC
5.0 or 6.0 in the field production version, when i am trying do create
a new system landscape. My Solution Manager is 4.0 release and support
package 10. The keys generated by ECC 5.0 or 6.0 doesn't work.That is because SAP has not released an ECC 7.0
NW2004s is also refered to as 7.0. It appears that you are confusing this with ECC 5.0 and ECC 6.0
A NW2004s installation can contain an ECC5.0 or ECC 6.0, just like it can contain a CRM 5.0 or SRM, or EP, et cetera
The generated keys probably do not work because you have wrong hostname or instance number entered. -
Error during installation of SAP NetWeaver 2004s Abap Trial Version
The following error occurred during installation of SAP NetWeaver 2004s ABAP Trial Version:
ERROR 2008-03-13 09:47:27
FSL-00001 System call failed. Error 53 (Network path not found.) in execution of system call 'CreateFile' with parameter (
127.0.0.1\sapmnt\trans\bin\DOMAIN.CFG, GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, CREATE_NEW, FILE_ATTRIBUTE_NORMAL, NULL), line (763) in file (synxcpath.cpp).
This error occurred at the end of the installation.
Any idea?
Thank's, Thiago.>
Thiago Amaral wrote:
> Ps: I already restarted my notebook.
That does not automatically start your instance. Have a look at the shortcuts SAP installed in your startmenu. There's both a startscript and a stopscript. -
Data error during Netweaver 2004s installation
Hi,
I am trying to install SAP Netweaver 2004s on Windows x64 platform.
I installed the J2SE 1.4.2_11-x86. At installation step "Import Java Dump" of Netwearver 2004s I get the error message:
++++
ERROR 2006-04-20 14:26:15
CJS-30049 Execution of JLoad tool 'C:\j2sdk1.4.2_11-x64\bin\java.exe -classpath C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\install\sharedlib\launcher.jar -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload C:/PROGRA1/SAPINS1/SOLMAN/SYSTEM/MSS/CENTRAL/AS/install/lib/iaik_jce.jar;C:/PROGRA1/SAPINS1/SOLMAN/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/jload.jar;C:/PROGRA1/SAPINS1/SOLMAN/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/antlr.jar;C:/PROGRA1/SAPINS1/SOLMAN/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/exception.jar;C:/PROGRA1/SAPINS1/SOLMAN/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/jddi.jar;C:/PROGRA1/SAPINS1/SOLMAN/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/logging.jar;C:/PROGRA1/SAPINS1/SOLMAN/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/offlineconfiguration.jar;C:/PROGRA1/SAPINS1/SOLMAN/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/opensqlsta.jar;C:/PROGRA1/SAPINS1/SOLMAN/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/S01/SYS/exe/uc/NTAMD64/mssjdbc/base.jar;D:/usr/sap/S01/SYS/exe/uc/NTAMD64/mssjdbc/util.jar;D:/usr/sap/S01/SYS/exe/uc/NTAMD64/mssjdbc/sqlserver.jar;D:/usr/sap/S01/SYS/exe/uc/NTAMD64/mssjdbc/spy.jar -sec S01,jdbc/pool/S01,
yar15/sapmnt/S01/SYS/global/security/data/SecStore.properties,
yar15/sapmnt/S01/SYS/global/security/data/SecStore.key -dataDir E:/JAVA_EXPORT\JDMP -job C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'C:/PROGRA1/SAPINS1/SOLMAN/SYSTEM/MSS/CENTRAL/AS/jload.java.log' for more information.
++++
In the jload.log file the following error is displayed:
+++++
Apr 20, 2006 2:22:28 PM com.sap.inst.jload.Jload logStackTrace
SEVERE: java.io.IOException: Data error (cyclic redundancy check)
at java.io.FileInputStream.readBytes(Native Method)
at java.io.FileInputStream.read(FileInputStream.java:177)
at com.sap.inst.jload.io.SplitInputStream.fillBuffer(SplitInputStream.java:119)
at com.sap.inst.jload.io.SplitInputStream.read(SplitInputStream.java:327)
at com.sap.inst.jload.io.GZIPInputSentinel.fillBuffer(GZIPInputSentinel.java:93)
at com.sap.inst.jload.io.GZIPInputSentinel.read(GZIPInputSentinel.java:160)
at java.util.zip.InflaterInputStream.fill(InflaterInputStream.java:213)
at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:134)
at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:87)
at com.sap.inst.jload.io.ChoppedInputStream.read(ChoppedInputStream.java:130)
at java.io.BufferedInputStream.read1(BufferedInputStream.java:220)
at java.io.BufferedInputStream.read(BufferedInputStream.java:280)
at java.io.DataInputStream.read(DataInputStream.java:170)
at com.sap.inst.jload.db.BlobHandler.setValue(BitHandler.java:147)
at com.sap.inst.jload.db.DBTable.load(DBTable.java:274)
at com.sap.inst.jload.Jload.dbImport(Jload.java:323)
at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
at com.sap.inst.jload.Jload.main(Jload.java:621)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Apr 20, 2006 2:22:30 PM com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
+++++
Does anyone knows what is causing this problem?
Best regards,
Twan JanssenHi Twan
Where did you get the j2sdk1.4.2_11 for x64? I'm now starting a NW04s installation on x64 and SAP note 941595 presents a link to the SUN web site, but the link is not correct and results in an error. So I can not go on with the installation since I don't have the correct J2SDK.
Thanks a lot in advance.
Kind regards,
Sam -
SAP NetWeaver 2004s Java Trial Version Installation error
Dear Techies,
I tried to install the trial version (SAP NetWeaver 2004s Java Trial Version
) downloaded from SDN, but I am getting an error immediately after started the installation. The log as given below.
Please suggest me where I can delete this special character mentioned in the log file ? The full log also is given below
INFO 2007-04-13 21:55:17
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:58]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02107 Path component contains reserved character ('"'): "C:
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:519]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02106 Path contains reserved character ('"'): "C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan"
Thanks and best regards,
Shiju
Full log :
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
guistart : true
command : "C:\Program Files\Java\j2re1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/MYTHIL1/LOCALS1/Temp/sapinst_exe.2644.1176481451\jar\instgui.jar;C:/DOCUME1/MYTHIL1/LOCALS1/Temp/sapinst_exe.2644.1176481451\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool C:\Netweaver_FullKit\SAPNW2004sJavaSP9_Trial\SAPNW2004sJavaSP9_Trial\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host MythiliKannan, port 21200 to continue with the installation
guiengine: login in process.
IRunModeReceiver CChoiceDialogModifier::continuePreviousRun()
INFO 2007-04-13 21:55:09 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.2.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.2.xml'.
INFO 2007-04-13 21:55:09 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.3.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/inifile.3.xml'.
INFO 2007-04-13 21:55:09
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2007-04-13 21:55:16 [synxcfile.cpp:493]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.2.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/keydb.2.xml'.
INFO 2007-04-13 21:55:16
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-04-13 21:55:17
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:58]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02107 Path component contains reserved character ('"'): "C:
ERROR 2007-04-13 21:55:17 [syxxcpath.cpp:519]
CSyPath::CSyPath("C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan")
FSL-02106 Path contains reserved character ('"'): "C:\SAP\MS2\SYS\profile\START_JC00_MythiliKannan"
ERROR 2007-04-13 21:55:17
CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: Bad path component: "C:.
ERROR 2007-04-13 21:55:17
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO 2007-04-13 22:00:30 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
Exit status of child: 1Hi,
I changed the system name but still I am getting the same error. Previously there was an SAP system was installed in my pc later I uninstalled that, but still there are two SAPsid_00 and SAPsid_01 (where in sid is MS) is running. I think this is the problem. I disabled the services as well but still I am getting the same error during the installation. How to delete the windows services ? and how to do a clean up for registry ?. I feel if I do theses two then I can install.
Thans a lot for your helps and support.
Shiju -
Netweaver 2004s SR3 PI 7.0 Installation Error
Hi All,
I am installing Netweaver 2004s SR3 PI 7.0 on Sun Solaris 10 and Oracle 10g, all the components are 64bit version.
During the installation step 95 out of 98 prepare to install minimal configuration ended with error. please find here the below error
ERROR 2008-10-29 20:26:23.2
FCO-00011 The step callOfflineCTC with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|callOfflineCTC was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: in
function NW_Call_Offline_CTC_ind_ind_ind_ind_SubComponentContainer_callOfflineCTC() {
var nw = NWInstall.getSystem(context.get("sid"));
var ctcDirFs = nw.getCI().getInstanceDir().concat("j2ee", "ctc");
var ctcExeFile = installer.onWindows() ? "LaunchOfflinectc.bat" : "LaunchOfflinectc.sh";
var ctcCall = ctcDirFs.concat(ctcExeFile);
installer.writeTrace("CTC is in" + ctcCall);
ASSERT(arguments.callee, ctcCall.isExisting(), "CTC executable cannot be found in " + ctcCall.toString());
var pmgt = new ProcessMgt();
var app = pmgt.createChildApplication(ctcCall, []);
var userData = nw.getUsers().getAccountData(NWUsers.roles.SIDAdm);
var user = (new AccountMgt()).getUser(userData.name);
var env = pmgt.getProcessEnvironment();
if (installer.onUnix()) {
env.setUser(user);
env.setWorkingDirectory(ctcDirFs.getNode());
env.setEnvironmentVariable(new Property("JAVA_HOME", nw.getJavaHome().toString()));
installer.writeTrace("For the Offline CTC Call, JAVA_HOME is set to " + env.getEnvironmentVariable("JAVA_HOME"));
app.setEnvironment(env);
var retval = app.run([], true);
ASSERT(arguments.callee, retval == 0, "CTC retval is not 0 but " + retval);
installer.writeTrace("CTC has been called in Offline Mode.");
CTC retval is not 0 but 255.).
I applied the sap note:1094628 - Error in step Call OfflineCTC from SAPInst 7.0 SR3 still it was not working.
I am not able to solve the issue please give the proper answer.
Thanks
Srinivasa Rao ArjalaHi ,
Please find here the latest updated logs.
sapinst_dev.log:
-rw-r----- 1 root sapinst 2992708 Oct 30 16:36 stepLogMessages.88.xml
-rw-r----- 1 root sapinst 1546114 Oct 30 16:58 LaunchOfflinectc.sh.log
drwxrwxrwx 10 root sapinst 21504 Oct 30 16:59 .
-rw-r----- 1 root sapinst 2992673 Oct 30 16:59 stepLogMessages.xml
-rwxrwxrwx 1 root sapinst 46729 Oct 30 16:59 stepKeydbClient.dmp
-rwxrwxrwx 1 root sapinst 158685 Oct 30 16:59 controllerKdbClient.dmp
-rw-r----- 1 root sapinst 6207660 Oct 30 16:59 sapinst.log
-rw-r----- 1 root sapinst 9603491 Oct 30 16:59 sapinst_dev.log
tail -f sapinst_dev.log
var retval = app.run([], true);
ASSERT(arguments.callee, retval == 0, "CTC retval is not 0 but " + retval);
installer.writeTrace("CTC has been called in Offline Mode.");
CTC retval is not 0 but 255.). You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to /sapinst. </p> </body></html>
TRACE 2008-10-30 16:59:57.572 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
LaunchOfflinectc.sh.log:
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException:The input message is not valid for the Action Controller
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.tc.lm.ctc.cul.serviceimpl.process.WriteProfileControllerI mpl:execute97
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:createSystemProperti es538
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:executeWizard141
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:main583
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke0-2
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke39
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: sun.reflect.DelegatingMethodAccessorImpl:invoke25
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: java.lang.reflect.Method:invoke324
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.engine.offline.OfflineToolStart:main81
Thanks
Srinivasa Rao Arjala
Maybe you are looking for
-
Why are my pages different in browser from within muse and preview
this is how it looks in browser.this is how it looks in muse.
-
Phone photos not automatically uploading to my pc
First let me say that photos taken on my and my wife's iPhone 4 have been automatically uploading to my Windows 7 PC for a couple of years. I depend on the function to get all of our photos off the phones and into our family album. Just a few days a
-
Creating a BP in CRM through LSMW using IDOC
I am trying to create a buss partner in crm through LSMW using IDOC: Message Type: CRMXIF_PARTNER_SAVE_M Basic Type: CRMXIF_PARTNER_SAVE_M02 I get an error: "No update is defined for BP role 000000". I am also filling IDENTIFICATIONCATEGORY: C
-
My IPad is Disabled and can't get it on.
My IPad is Disabled and says connect to Itunes. I don't know how to get it working again.
-
Hi Folks, I'm trying to export my 24p 16x9 project, and it is coming out as a 4x3 video. I go File>Export>Quicktime Movie>Settings>Custom, set everything for 16x9 widescreen and no luck. Is there something I am doing wrong? I set the project up under