Sapinst with xming: no input possible

I try to install Solution Manager 7.0 EHP1 SR1 on AIX 6.1 and want to use xming on a windows PC for X-windows.
After starting sapinst on aix I receive the normal short window with the SAP people, then only a empty screen, where you normally type in the User and password for sapinst.
I have found Xming doesn't work with sapinst , but resizing of the windows didn't help.
Any ideas or experiences with xming ? I also tried MobaXterm, which was recommended by a collegue, but had the same problems
Best regards,
Uta
P.S: My windows host and the SAP server are separated by firewall. Port 22 (ssh) is opened and xclock from sap-server is correctly started on my windows pc.

Hello Mark,
but with Solman 70 EHP1 SR1 Instmaster DVD I ALWAYS get a blank screen: no selection of installation options or user or whatever. Resizing doesnt help.
On the same aix-host, I tried an ERP-instmaster-DVD (51038620_1_7.01_SR1_NW_ERP_CRM_SRM_SCM_INSTMASTER), too. There I CAN see the options ERP, SCM, etc... ( but for opening the sections I have to resize the window)
I found Unable to view the content in SAPINST screen ( Blank screen) , but until now I was not able to suceed with solman - sapinst.
I tried starting sapinst server and gui separatly (but both on aix sap server) -> same problem with blank screen.
POLICY-Files:
Could it have to do something with the policy-Files ? Sapinst from Solman 7.0 SR1 EHP1 seems to use SAP JVM 6.1 and note 1240081 list several policy files for several sapinst. Normally I would think, that the policy is included in instmaster-DVD ? Is it really necessary to set JCE_POLICY for sapinstgui ?
# /sapmnt/SM1/sapinst/sapinst_exe.8716482.1300219869/jre/bin/java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 6.1.006)
SAP Java Server VM (build 6.1.006, Oct 13 2009 02:33:53 - 61_REL - optU - aix ppc64 - 6 - bas2:127656 (mixed mode))
I tested with several JCE_Policy-files (see also note 1240081). Nothing helped. Tomorrow I will probably try with policy file for SAP JVM 6.1
# java policy note 1240081 for SAP JVM 5.1
export JCE_POLICY_ZIP=/software/SAP/java/jce_policy-1_5_0.zip
./sapinstgui
# java policy note 754699 ->1426759 ->https://www14.software.ibm.com/webapp/iwm/webpreLogin.do?source=jcesdk
export JCE_POLICY_ZIP=/software/SAP/java/unrestricted.zip
./sapinstgui
FROG-Message
I am not sure if the "frog.jar: version 7.20.18 08/11/10 sap.theme: null" message in sapinst output could be a problem:
Any suggestions ?
Uta
Edited by: Uta Hedemann on Mar 15, 2011 11:53 PM

Similar Messages

Is it possible to show a presentation from the original iPad via wireless on an older projector with no HDMI input?

is it possible to show a presentation from the original iPad via wireless on an older projector with no HDMI input? If so, what equipment is needed?

The ipad not support wireless projector yet.
The workaround is you are using computer that connected wirelessly [needs 2 wireless adapter] / via cable to projector and connected also to the wireless router.
You are controlling the computer via wireless connected to the router using remote desktop app like splashtop, teamviewer, logmein, vnc, etc. You must set the remote desktop port and app at the computer too as ipad app support.

Select-option _no input possible???

Hi.. all
How can i get my selct option as no input possible mode in selection screen....
so here user can not change the default value which i set...
for that how can i restrict......
how can i get my select-option with defulat entries and with NO INPUT POSSIBLE MODE...
Thnaks,
Naveen.I

hiiiii
you can use code as follows for select option..
AT SELECTION-SCREEN OUTPUT .
IF p_rad2 IS INITIAL .
    LOOP AT SCREEN.
      IF screen-name CS 'p_docno'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.                           " IF screen-name CS 'p_docno'.
    ENDLOOP.                           " LOOP AT SCREEN.
ELSE.
    LOOP AT SCREEN .
      IF screen-name CS 'p_docno'.
        screen-active = 1.
        screen-input = 0.
        MODIFY SCREEN.
      ENDIF.                           " IF screen-name CS 'p_docno'.
    ENDLOOP.                           " LOOP AT SCREEN .
ENDIF.                               " IF p_rad2 IS INITIAL .
use that screen-input = 0 or 1 whatever you want ...
regards
twinkal

No sync with audio for input files AVI MPEG4 23.976 fps

No sync with audio for input files AVI MPEG4 23.976 fps.
If i open in Premiere Pro CC any file AVI MPEG4 23.976 fps (with internal audio MP3 or AC3) i got growing out of sync from start to end of file, even while play it at internal media player of Premiere Pro CC for source file.
Using external audio files AC3 or MP3 not help.
In properties of source file i see 23.97 fps instead of 23.976 fps, and time of internal file is wrong.
If i try Clip > Modify > Interpreter Footage > custom settings to 23.976 time i see right time, but when i click "OK", custom fps saved as 23.98 fps instead of 23.976 fps and time of source goes wrong again.
So i always get bad sync such files in Premiere Pro CC while play or export them.
But in all media players, other editors, and in PluralEyes sync OK with all such files.
If i open M2TS or MP4 (H264 23.976 fps) source file, all OK, it it shows as 23.976 fps, time is right, and sync OK.
So i want to add automatic detection 23.976 fps instead of 23.97 fps for source AVI files with 23.976 fps.
Is it possible?

Yes, i know what XviD and DivX does not edit well in Premiere Pro. And because of that i create this topic "No sync with audio for input files AVI MPEG4 23.976 fps" and was hoping to get help in solving the problem, rather than stating that the problem really is.
XviD and DivX it is MPEG4.
Xvid (formerly "XviD") is a video codec library following the MPEG-4 standard, specifically MPEG-4 Part 2 Advanced Simple Profile (ASP).
http://en.wikipedia.org/wiki/Xvid
I have many old useful materials in XviD and DivX formats, and have no other formats versions for that material.
XviD and DivX are very compact formats to store video at acceptable quality and it is fully compatible with all players and editors for PC except Premiere Pro.
You suggest to convert them to another format (DV) to make compatible with Premiere Pro... It is not what i want.
Let me explaine:
1) Size of files
uploaded AVI XviD 1280x720 file with very good quality have size 1.9Gb (with audio AC3 2.0). If i convert it via VirtualDub from "AVI XviD" to AVI DVCPRO HD 1280x720 (without audio) it have size 35Gb, and quality is worst than at XviD-HD, and also converting take much time.
2) Compatibility with AC3 and MP3 audio inside AVI
AVI DV / AVI DVCPRO not compatible with AC3 and MP3 audio inside, only with PCM
http://en.wikipedia.org/wiki/DV
AVI XviD and DivX can use AC3, MP3, OGG audio without any problems.
Size of 1Hour 30Min "AC3 Stereo 48kHz 16bit 384Kbps" file is 257Mb
Size of 1Hour 30Min "PCM Stereo 48kHz 16bit" file is 1030Mb
3) I have and use hardware H264 encoder card "Matrox CompressHD" for export my material
http://www.matrox.com/video/en/products/compresshd/specs/
This card works only from Adobe Premiere Pro, so i can not use it from VirtualDub or other editing software.
So i need a full compatibility Adobe Premiere Pro with all popular standard formats of input files.
Here we see:
http://www.adobe.com/products/premiere/extend.html#Supportedvideoformats
Supported video formats:
"Adobe Premiere Pro CC leads the industry with incredible, thorough native media support, meaning you can edit virtually all of the major video, image, and audio formats natively without waiting."
As most PC users knows, AVI XviD it is a very popular free video format, and would be very useful if Adobe will make normal compatibility with that format in Premiere Pro.

Hp pavilion ms235 how do I connect to a tv with a HDMI input?

how do I connect to a TV with a HDMI input? Can I use a USB graphics adapter?

Here are the specs for your HP Pavilion All-In-One MS235 Desktop Computer. Based on the specs, your computer doesn't appear to have a video output of any kind. A USB-to-video adapter such as the EVGA UV Plus+ UV39 will be required to connect your HDTV to your computer.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Custom action with XML type input and output parameter.

Hi,
I want to develop custom action with xml type input and/or output parameter.
Is there sample code for java side. How is the definition of input and/or output parameter and set/get methods?
does it need special .jar file to develop custom action like this?
Thanks.

Cemil - yes, you can use XML data types. Use the class
com.sap.lhcommon.xml.XMLDataType
for your parameter type. Here is a snippet from a custom action we use to log XML (instead of just returning the #text node like the default logger does):
public class XMLLogger extends ActionReflectionBase
    private String source;
    private String eventType;
    private String textMessage;
    private XMLDataType xmlMessage;
    public XMLLogger()
        log = new Logger("UserLog");
        source = DEFAULT_SOURCE;
        eventType = TYPE_INFO;
        textMessage = "";
        xmlMessage = new XMLDataType();
    public XMLDataType getXmlMessage()
        return xmlMessage;
    public void setXmlMessage(XMLDataType xmlMessage)
        this.xmlMessage = xmlMessage;
    public void Invoke(Transaction transaction, ILog ilog)
        StringBuffer sb = new StringBuffer();
        sb.append('[');
        sb.append(source);
        sb.append("] ");
        sb.append(textMessage);
        sb.append(XMLUtils.convertXmlToString(xmlMessage));
XMLUtils is a helper class we wrote - it's just a bunch of standard Java XML boilerplate code. The important part you need to know is XMLDataType.getDocument() will return an org.w3c.dom.Document.
I hope that was enough information to help.
-tim

Report with XML as input !

Hello,
I am hv been trying to create a simple report with an XML input but by the end of it, it doesnt give any data on the report.
I tried it with XML + SQL input, it gave me a blank report and when I tried with a pure SQL input it did give data in the report. I enabled the trace option but couldnt get to the core of the problem.
My XML & XSD file are all valid, they are auto-generated.
The report doesnt give any error either.
Any clue what the problem could be ??
Regards,
Madhu.

Post Author: ashdbo
CA Forum: Data Connectivity and SQL
I think it can be done by looking at Crystal Report XI.BUTHow can I do this programatically in Java ? Thanks,Ashok

Synchronizing two counter frequency inputs with multiple analog inputs

Hello all,
I'm fairly new to LabVIEW and I'm trying to collect data from multiple sources with synchronized timing on the acquisition but I'm having trouble figuring it out. My problem is that I've got two counter frequency inputs, one optical tachometer reading one pulse per revolution, and a max machinery flow meter with a k factor of 12000. I can't seem to figure out how to sync the timing with my multiple analog inputs. I've been attempting to get the tachometer to sync with the analog inputs first by following the example linked here. (https://decibel.ni.com/content/docs/DOC-10785) So far each time I run it I either get a timeout error on the DAQmx read or a "Multiple sample clock pulses were detected" error (see attached image). It seems if I slow the sampling rate way down to say 10 hz and ensure that the tachometer signal is over 800-1000 RPM (13-17 Hz) before starting the VI then the program will run without errors until the RPM drops below that threshold then the "Multiple sample clock pulses" error occurs. The code is attached below.
Does anyone know of a more effective way of syncing counter frequency inputs with analog inputs? I'd like to have a VI that can show 0 RPM (and eventually 0 flow as well, but I think I need to figure out the timing of one counter before I add another as it seems I can't have two counters in the same task). Any help on this would be greatly appreciated.
LabVIEW version 13.0
cDAQ-9178 Chassis with NI 9401 for the two counter inputs and NI 9205 for the analog inputs.
Thanks!
Richard
Solved!
Go to Solution.
Attachments:
SimpleDAQ.vi ‏44 KB
LV_Error.JPG ‏31 KB

Maybe third times the charm?
So I've finally got a good handle on why the VI is having problems at low RPM though I'm somewhat embarassed how long it took me to do that
Because I have the counter time synced to my Analog input task if it doesn't see at least two pulses between the two clock pulses set by the analog input task I get the -201314 "Multiple sample clock pulses" error. This seems fine at first as it just sets a minimum RPM that I can measure and it's well below the area I'm interested in so no problems there. I tried a simple error handler that would clear the error when it happend assuming the loop would keep iterating until the RPM went above that minimum at which point I would get a signal again. This is not the case, the read function just continues to spit out the -201314 error even after the RPM is back in the readable range. So then I tried adding two case structures so that when the error occured it would stop the task, clear the error, and then start the task again on the next loop iteration (Code Attached). This also doesn't work as the error shows up again on the stop task and then AGAIN on the start task on the next loop iteration. It seems this error is not actually being cleared and once it happens it stays with the task regardless of what the error cluster is carrying.
Anyone have any ideas? The only solution I can think of is to just clear all tasks and recreate them each loop iteration until the RPM is readable again but that strikes me as a horribly clunky solution.
Richard
Attachments:
SimpleDAQ_1_Start Stop.vi ‏48 KB

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

MacBook pro will not boot up. Blank screen with message File is possibly corrupted. Checksum does not match etc

MacBook Pro suddenly will not boot up. Blank screen with message File is possibly corrupt. Header checksum does not match, etc

Hi s.cheslik,
It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

What type of connector do I need from my Macbook Pro Retina laptop for sound out to audio speakers with regular audio input jacks?

I am wanting to use regular audio speakers with traditional audio input jacks to serve as output speakers on my Macbook Pro Retina display laptop. What type of cable would I need to connect?

http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP

How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karan

Hello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran

XY Graph with two Y inputs

I need to know how to graph a XY graph with two values of Y. I need to it to compare to different angles and I also would like to make them graph different colors. Currently i have an XY graph with one Y input using the XY Graph express VI. I found out how to set up for two simultaneous plots by editing the properties for the graph but I don't know how I can input another Y value to plot using the XY Graph express VI.
Thank You,
Phil

I never use the express functons but I think what will work is to use the merge signal function. Try merging the two x inputs together and merging the two y inputs together. I made a modification to the shipping example called Lissajous.vi to try a quick test.
Attachments:
lissajous_mod.JPG ‏54 KB

Problem in getting data into database with standard direct input program

HI All,
I am having problem which is not updating the records in MM01 or MM02 with standard direct input program. i have data in internal table. from that table i am trying to upload into database by using background job MRP_MATERIAL_MASTER_DATA_LOAD.
when i execute my program it is showing message job is started. then i go into sm37 and seethe job status by executing. there also i am seeing job completed succesfully.
but if i go to mm03 and find the materials are updated or created there i couldn't find the material numbers which are from internal table.
So if ny one help me it wil be great.
Thanks in Advance
Venkat N

Hi Anil,
Thanks for your answer, but i am facing problem is i have material no and denominator and Actual UOM and nominator field values in the flat file.....
by using RMDATIND direct input program with MRP_MATERIAL_UPLOAD as job name for background job while uploading data into database.
here i am not getting data in to database, but when i execute the job in sm37 it is showing that message job processing successfully completed...this is my status..
if u can help me in this it will be gr8ful..
Thanks,
Venkat N

Open CC applications to default preferences with no user input

I am searching for a way to open CC applications to default preferences with no user input. I understand there is a key board short cut (command/option/shift on start) but I am hunting for a way to have the preferences always revert to default. In the past I have written a script to delete the preference files upon computer start up but once again, it needs to be rewritten. Is there a method that does not require KLUDGE?

Try:
*http://kb.mozillazine.org/Preferences_not_saved

Sapinst with xming: no input possible

Similar Messages

Maybe you are looking for