SAPKITL426 & 427

Dear Experts,
I want to implement those files above, and those files need approval from solman to be downloaded but i can not find those in "Entry by Component". Those files are found when i search directly from SMP (not thru solman) but it can not be downloaded without approval. How can i make it?
Please advise.
Thanks and Regards,
Rudi

Please ignore this message as i have got the files from other system.

Similar Messages

Image capture deleted all my photos from iPhone without transferring them to the harddisk. So now I've lost 427 photos due to some data error it says. Please help me get my pictures back!?!

I just wanted to back up my photos since I haven't done so since October 5th. I plugged in my iPhone and let Image Capture transfer the selected photos to the designated folder. Accidently I hit 'Import All but that's not the biggest problem. Apparently I had "Delete all after transfer" on AND 427 photos apparently "failed to transfer" as it said. I didn't think it was such a big problem, but then I noticed : what the ****.The delete all option was ON and now ALL my photos are gone, from the iPhone and NOT on the computer. Except a list of some old pictures I already have three backups and from the new ones between Oct 5 and this day I have a random selection >><!!!
So please help me! How do I get my pictures back? iPhone Data recovery? Please please help. There are so many nice memories of this month and I'm so ****** that this just happened!

If you have iCloud backup turned on or if you have recently backed up via iTunes you could restore the phone from either of those sources. Camera Roll photos are included in those backups. Be aware that doing a restore will replace the contents of the phone with the contents of the backup so you would lose anything new on the phone since the last backup. Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support

Random system freezes - "kernel BUG at fs/inode.c:427!"

Hi there,
I got some weird problem: From time to time my system freezes randomly (and completely - hard reset). This was not always the case. Unfortunately I can't remember the exact date of the beginning of this freezes (and if I could I wouldn't know what I had done before), but in my humble oppinion the problem occurs since the upgrade to linux-3.1.6. Right now I'm running 3.1.9
After shutting down my notebook (a Thinkpad L520, Sandy Bridge), often I can't even properly start it again (mostly just black screen - does nothing). In that case I usually remove the battery, wait a few seconds, put it back in and then the computer boots without problems.
Sometimes (e.g. at the time of writing this) this problem occurs more often than usual.
Until today I had no clue what caused this. I disabled a lot of functionalities in the BIOS, unplugged everything (second monitor, etc.), did a memtest86 (without errors). A few hours ago I luckily got a kernel panic message on my screen (I assume it got there "before it was too late"). See a "screenshot" of here: http://i.imgur.com/LdgFE.jpg
The "kernel BUG at fs/inode.c:427!" line got my attention - could this be a filesystem bug? I got an Intel 310 Series SSD in my notebook, running ext4 on it. Could it be possible that there is some issue with that or just an annoying bug?
Maybe someone can help
For the curious:
My fstab:
/dev/sdb1 /boot ext2 defaults 0 1
/dev/sdb2 / ext4 defaults,noatime,discard,user_xattr 0 1
/dev/sda1 /mnt/data ntfs-3g uid=mlux,gid=users 0 0
rc.conf MODULES
MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave ac battery button fan thinkpad_acpi)
rc.conf DAEMONS
DAEMONS=(syslog-ng @crond @cpufreq @tlp @acpid @cupsd @privoxy dbus networkmanager slim)
uname -a
rc.conf MODULES
Linux luxbox 3.1.9-2-ARCH #1 SMP PREEMPT Sat Jan 14 09:11:37 CET 2012 x86_64 Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz GenuineIntel GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

helloworld1 wrote:Have you tried fsck you disk?
Yep - did that - nothing suspicious.

I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser, some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

I have same problem. I could only see a fraction of my project photos if I browse the Aperture lbrary. It is the same problem when I sync the aperture photos to my iPhone or iPad. I still cannot solve it but I know a way to go around it for your iMovie to see the pictures so that you can work on your iMovie.
Here is the work around:
Export the photos from your album to your hard disk and re-import into your iPhoto. Now you should be able to see those photos that you want to work on in iMovie when you browse your iPhot library.

SLP Directory Agent (port 427) - internal network goes down

Due to some VPN problems with corporate headquarters, I had to switch out my current firewall (Instagate EX2) with a new SonicWall. Whenever we tried to switchover to the new SonicWall, my entire internal network went down. I was not able to login to the different Xserves for their appropriate services. Examples included the email server, FTP server, and a special application server we use for news editing. All Xserves run OS X Server 10.4. Our clients range from PowerMacs to Mac Minis and Mac Pros - all running OSX 10.4 with a few running 10.3. Symptoms of problems include when trying to connect to the email server, it just sits saying "Connecting to 10.1.2.x...", same thing for the FTP services. The newsroom software, that usually takes a 1 - 2 seconds to log into, then takes 45 seconds or so. Several techs looked at the problem without any suggestions about what to do to fix it.
We have a Juniper Netscreen router provided by our ISP that connects to the Instagate firewall and to the network itself. Upon looking at the logs, it was discovered that the OS X stations IPs were using a port 427 - which is used by SLP. One of the techs said that is what is taking our network down when we disconnect the Instagate router from the network (because it evidently is passing this SLP traffic onto the Netscreen router). So when the Netscreen router comes off the network, none of the services on the Xserves work because of this. They said I needed to disable the port 427 on the Netscreen, but if I do this, isn't this having the same effect as taking the network down. Then it was told to me to setup a Directory Agent to handle this traffic. But they didn't provide any instructions to me on how to setup this up on the network or on OS X Server.
Does anyone have any guidance or suggestions regarding this?
Thanks,
G

I had the ISP's tech in today with proper network analysis software to see what's going on.
We discovered that it is not SLP that is causing problems as one tech had suggested. Anytime that the internet access was disconnected from the network, the access to services on the OS X Servers go down or are extremely slow. So we began to look at the DNS entries and realized if we removed DNS then the servers refused access, if DNS entries were made (using OpenDNS), then the servers work.
For example, we use the mail server component of OS X Server 10.4 for our email services. We cannot access the internal server (via IP) without the XServe having an entry in DNS. Put in OpenDNS servers, and things work like they should. The same scenario applies to any services (FTP, NewsEdit, etc.) that's on the OS X Servers. I guess what I'm not understanding is why does everything work internally as long as the OS X Servers have something listed for DNS - even though the DNS is an external DNS IP? Because it is external outside of the network, it's not like the mail server or clients are resolving the private IPs (which there's nothing to resolve since use IP numbers for connection purposes).

[svn] 1098: Merge 3.0.x -- 362:394, 427:429, 603:608, 644:645, 651:663, 672 :676, 755:756, 763:766, 785:790, 812:814, 854:861, 862:866, 866:933,971: 1009, 1050:1056 -- trunk

Revision: 1098
Author: [email protected]
Date: 2008-04-03 14:50:39 -0700 (Thu, 03 Apr 2008)
Log Message:
Merge 3.0.x -- 362:394, 427:429, 603:608, 644:645, 651:663, 672:676, 755:756, 763:766, 785:790, 812:814, 854:861, 862:866, 866:933,971:1009, 1050:1056 --> trunk
Modified Paths:
flex/sdk/trunk/frameworks/build_framework.xml
flex/sdk/trunk/frameworks/projects/airframework/build.xml
flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/Window.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/CursorBookmark.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/IList.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/IViewCursor.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/ListCollectionView.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/XMLListCollection.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/ComboBase.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Label.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Spacer.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/TextArea.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/TextInput.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/VRule.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridDrag Proxy.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListBase.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListItemDragProx y.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListItemRenderer .as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/TileBase.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/TileListItemRend erer.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/menuClasses/IMenuItemRendere r.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/DefaultDataDescr iptor.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/ITreeDataDescrip tor.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/videoClasses/CuePointManager .as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/videoClasses/VideoError.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/ComponentDescriptor.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/CrossDomainRSLItem.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/IRepeaterClient.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectTargetFilter.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Tween.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ParallelInstanc e.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/events/NumericStepperEvent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/events/ScrollEvent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/events/SliderEvent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/logging/LogLogger.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/BrowserManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/DragManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/FocusManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/IBrowserManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/ILayoutManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/LayoutManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/DownloadProgressBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/Locale.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/ResourceManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/DescribeTypeCache.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/ObjectProxy.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/FlexClient.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MessageAgent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MessageResponder.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/SubscriptionInfo.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/StreamingConnectionHandl er.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/errors/MessageSerializationError. as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/events/ChannelFaultEvent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/messages/HTTPRequestMessage.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/messages/SOAPMessage.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AsyncRequest.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AsyncToken.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/Fault.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/Responder.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/events/FaultEvent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/events/HeaderEvent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/events/WSDLLoadEvent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/HTTPService.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/mxml/HTTPService.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/remoting/RemoteObject.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/soap/AbstractWebService.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/soap/LoadEvent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/xml/IXMLEncoder.as

You'd be better off putting those values in a real table, and don't know why you already didn't consider that.
I would do so for an IN list of more than 4 values, this would also save on maintenance.
You could still put those variables in a PL/SQL collection and CAST that collection to a TABLE type variable, to use that in your IN clause.
http://asktom.oracle.com has examples similar to that, search for 'Dynamic IN_list'
Sybrand Bakker
Senior Oracle DBA

My daughters Ipod touch is disabled for 22,427,950 minutes. Does anyone know how to fix this? It also goes to black screen when in use, even when battery is charged.

My daughters Ipod touch is disabled for 22,427,950 minutes. Does anyone know how to fix this problem? The screen also goes to black when using it, even if battery is fully charged.
Thanks

http://support.apple.com/kb/ht1212
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

[..\..\Src\Win\WinPathUtils.cpp-427] error?????

I am running Adobe Production bundle CS3 and in Encore when I try to import an asset this message window appres "Adobe Encore has encountered an error [..\..\Src\Win\WinPathUtils.cpp-427]" and then I click the "continue button" and this pops up "An input contract violation has occured!'
I am running windos XP Sp2, fast machine with lots of ram and memory! any ideas? Previous Production Bundle ran perfect, but I unistalled it and installed the new CS3 and now I get this problem.
Any ideas anyone?
and a HUGE thanks in advance

While using Adobe Premier Elements 7 to edit AVC HD I encounted the error message (..\..\Src\Win\WinPathUtils.cpp.533) when trying to reopen an almost completed video project.
After days of trying to solve why opening the project I encounter error message (..\..\Src\Win\WinPathUtils.cpp.533) I decided to re-edit the video starting with a different project name. When I came to place AVCHD clip 00055 on the time line I encounter error message (..\..\Src\Win\WinPathUtils.cpp.533) I deleted clip 00055 from the hard drive (these clips were a copy from my camera I still have the originals)
I was able to reopen the original project as this AVCHD clip 00055 was the cause of error message (..\..\Src\Win\WinPathUtils.cpp.533) I renamed AVCHD clip 00055 to 05555 reinserted it in original project this saved me many hours of re-editing
Therefore I think in my case error message (..\..\Src\Win\WinPathUtils.cpp.533) was to do with a corupt AVCHD camera file within the project which was removed and the original project was abled to be opened.
Chris

[svn:bz-trunk] 10595: Add ReadOnly test case for bug blz-427

Revision: 10595
Author:   [email protected]
Date:     2009-09-25 11:44:20 -0700 (Fri, 25 Sep 2009)
Log Message:
Add ReadOnly test case for bug blz-427
Ticket Links:
    http://bugs.adobe.com/jira/browse/blz-427
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/src/blazeds/qa/remotingService/Book.java
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/src/blazeds/qa/remotingService/Echo.java
Added Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ReadOn lyTest.mxml

[svn:bz-trunk] 9713: Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.

Revision: 9713
Author:   [email protected]
Date:     2009-08-27 14:09:43 -0700 (Thu, 27 Aug 2009)
Log Message:
Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.
QA: Yes
Doc: Yes - We have a new include-read-only property, see resources/config/services-config.xml
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-427
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/io/AbstractProxy.java
    blazeds/trunk/modules/core/src/flex/messaging/io/SerializationContext.java
    blazeds/trunk/resources/config/services-config.xml

SLP Ports between servers - Only UDP 427 or also 1024+

Hi,
I was a little confused with some TIDs talking about what ports are needed with SLP. Some TIDs just refer to UPD port 427 however TID#10079087 talks about the DA replying to the UA on its 'ephemeral' port of UDP 1024 or higher. It would seem that a DA needs to be able to communicate with a server that registers with the DA on 427(SA) as well as 'ephemeral' ports UDP 1024 and higher(UA). Can anyone verify this? Thanks.
Riley

Hi,
rileymartin wrote:
>
> Hi,
>
> I was a little confused with some TIDs talking about what ports
> are needed with SLP. Some TIDs just refer to UPD port 427 however
> TID#10079087 talks about the DA replying to the UA on its 'ephemeral'
> port of UDP 1024 or higher.
For SLP V2, you need both, UDP *and* TCP to be open, and the source port
will in both cases be 1024+
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

[svn:bz-trunk] 13622: Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.

Revision: 13622
Revision: 13622
Author:   [email protected]
Date:     2010-01-19 02:38:36 -0800 (Tue, 19 Jan 2010)
Log Message:
Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.
QA: No
Doc: No
Details: Documented the fact that include-read-only property applies globally.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-427
Modified Paths:
    blazeds/trunk/resources/config/services-config.xml

Default cell values for column not properly saved in uir file in labwindows 2009 (9.1.0 427)?

I've run into a strange problem with the table control. Basically, even though I set default cell values for a particular column as numeric, when I try to add items to the list it tries to add them as strings, and returns an error message that it is expecting *char instead of int. Furthermore, when I open the uir file that contains the table in question in 2010, it appears as if the default cell values for that column are still set as strings, even though in 2009 when I open the uir file it shows as numbers. I tried converting the uir to C code, and sure enough the C code indicated that the column still is a string type.
I've gone ahead and made a small project to show the issue. If you open this project in labwindows 2009 and click on the table in the table_bug.uir, and edit default cell values for column 1, you will see that the cell settings have type as numeric and data type as int. When you run the project, however, it will fail with an error message saying that it is looking for a *char. When this same project is loaded into labwindows 2010, clicking on the table in table_bug.uir and edit default cell values (column 1) shows the type as string. When I change this to numeric (and change numeric attribute to int), this runs fine in 2010. I tried simply changing the uir in 2010, and then using it in 2009, but 2009 complains that the uir is from a newer version (understandable). If there is any workaround that would let me continue to use 2009 for the time that would be great.
Any help would be greatly appreciated.
thanks,
Alex Corwin
Solved!
Go to Solution.
Attachments:
table_bug.zip ‏324 KB

I opened the UIR in 2009 (but I have 2009 SP1) and it still showed that the default value for the first column was a string. I didn't have any problems changing it to a numeric int, and then building and running the project without error.
Here are a few things you can try:
1) Change the default value to a string. OK out of the dialog, re-enter the dialog, and change it back to Numeric int. Resave and see if the problem has gone away.
2) You said you get a ".UIR is from a newer version" error when opening the 2010 UIR in 2009. Does the UIR still open if you click okay? Often times this will work just fine. Assuming you don't have any problems with this, make a minor change to the UIR in 2009, such as moving the table to the left, and then back to the right and then re-save. See if your program works now.
Kevin B.
National Instruments

[svn:fx-trunk] 6705: Vellum 1.0 build 427.

Revision: 6705
Author: [email protected]
Date: 2009-05-07 05:59:21 -0700 (Thu, 07 May 2009)
Log Message:

I had downloaded it for test, and requested for evaluation license...
But I haven't got license, and also I am not able to find Flash Builder Plugins from HFCD site....
I think those plugins are removed from site....
Please help me, if anyone have those plugins...

Payables Open Interface Import program is getting failed

REP-0004: Warning: Unable to open user preference file.
MSG-00999: ORA-03113: end-of-file on communication channel
ORA-01403: no data found
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-03113: end-of-file on communication channel
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: MSG-00999: ORA-03113: end-of-file on communication channel
ORA-01403: no data found
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-03113: end-of-file on communication channel

Hi Pravin,
Thanks, In trace file I found below error:
[2014/10/30 7:26:26:227] State 56016 (JobManager:updateJobStatus): Job 1 status is: Running the report Running before report trigger
[2014/10/30 7:26:26:227] Debug 50103 (JobManager:notifyWaitingJobs): Master job 1 notify its duplicated jobs.
[2014/10/30 7:26:26:228] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 1
[2014/10/30 7:26:26:228] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_DEBUG_SWITCH
[2014/10/30 7:26:26:228] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_DEBUG_SWITCH
[2014/10/30 7:26:26:228] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_BATCH_NAME
[2014/10/30 7:26:26:228] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_BATCH_NAME
[2014/10/30 7:26:26:228] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_GL_DATE
[2014/10/30 7:26:26:228] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_GL_DATE
[2014/10/30 7:26:26:228] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_HOLD_CODE
[2014/10/30 7:26:26:228] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_HOLD_CODE
[2014/10/30 7:26:26:229] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_HOLD_REASON
[2014/10/30 7:26:26:229] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_HOLD_REASON
[2014/10/30 7:26:26:229] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_COMMIT_CYCLES
[2014/10/30 7:26:26:229] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_COMMIT_CYCLES
[2014/10/30 7:26:26:229] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_SOURCE
[2014/10/30 7:26:26:229] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_SOURCE
[2014/10/30 7:26:26:229] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_GROUP_ID
[2014/10/30 7:26:26:229] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_GROUP_ID
[2014/10/30 7:26:26:229] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_CONC_REQUEST_ID
[2014/10/30 7:26:26:230] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_CONC_REQUEST_ID
[2014/10/30 7:26:26:230] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_ORG_ID
[2014/10/30 7:26:26:230] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_ORG_ID
[2014/10/30 7:26:26:230] APP 50103 (C Engine): 07:26:26 APP ( Database Column          P_SUMMARY_FLAG
[2014/10/30 7:26:26:230] APP 50103 (C Engine): 07:26:26 APP ) Database Column          P_SUMMARY_FLAG
[2014/10/30 7:26:26:230] PLSQL 50103 (C Engine): 07:26:26 PLS ( Function:       beforereport
[2014/10/30 7:27:55:427] Error 50103 (C Engine): 07:27:55 MSG MSG-00999: ORA-03113: end-of-file on communication channel
ORA-01403: no data found
[2014/10/30 7:27:55:429] PLSQL 50103 (C Engine): 07:27:55 PLS ) Function:       beforereport
[2014/10/30 7:27:55:429] Error 50103 (C Engine): 07:27:55 ERR REP-1401: 'beforereport': Fatal PL/SQL error occurred.
[2014/10/30 7:27:55:432] Error 50103 (rwfdt:rwfdtprint): 07:27:55 ERR Error occurred sending Job output to cache
[2014/10/30 7:27:55:433] Error 50103 (rwfdt:rwfdtfl_FreeDistList): running
[2014/10/30 7:27:55:433] Error 50103 (rwfdt:rwfdtfl_FreeDistList): quit
[2014/10/30 7:27:55:441] State 56016 (JobManager:updateJobStatus): Job 1 status is: Terminated with error:
REP-1401: MSG-00999: ORA-03113: end-of-file on communication channel
ORA-01403: no data found
REP-1401: 'beforereport': Fatal PL/SQL error occurred.

SAPKITL426 & 427

Similar Messages

Maybe you are looking for