SAPL0SAP customization
Hi Experts,
I have a requirement of adding a message on transaction OB08 (Exchange rate maintenance) or program SAPL0SAP to be exact to check the difference between the old exchange rate amount and the new amount. Since the update of the exchange rate is manual, there were issues of wrong exchange rate maintenance (for example the new exchange rate amount should be 0.002 but the user maintained 0.02).
Can you advise if this is possible using standard? Or is developing a z program the only way to apply this checking on SAPL0SAP (OB08)?
Many thanks,
Steve
go to Logistics general-- Tax on goods movementIndiaBasic settings --- Maintian series group ( See if you have maintaines S2 here)
And then Assigned the same in
Tax on goods movementIndiaBusiness Transactions --- Outgoing Excise Invoice -- Maintian Default Excise and series Group for your Sale area
Cheers
Similar Messages
-
Error while running a customize report in oracle ebs
Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein -
Hi,
I want to customize Dunning letter program. We have around 10 Operating Units. We want to build the customization for only US and UK operating units using BI Publisher. Rest of the operating units need to use the standard report.(text output.)
'Dunning Letter Generate' will call 'Dunning Letter Print from Dunning Letter Generate' program. 'Dunning Letter Print from Dunning Letter Generate' will need to show the PDF output for US, UK operating units. Need to show text output for other operating units.
How can i customize this.
Thanks in advance.Sorry if i confuse you. We are using BI Publisher with EBS integration.
'Dunning Letter Generate' is a spawned program which calls 'Dunning Letter Print from Dunning Letter Generate' internally. We cannot update 'Dunning Letter Generate' to call other programs.
Now i can build template for 'Dunning Letter Print from Dunning Letter Generate' to get the PDF output.
But i need PDF output for only US and UK operating units only. For the remaining operating units should use previous standard text output.
Here i cannot create seperate custom programs for US, UK operating units. Because we cannot call them from 'Dunning Letter Generate'.
How can i proceed.
Please let me know. -
Customize Print Quote stylesheet ASOPRINT.xsl
Hi,
I have a requirement where I need to check if we can use the existing Print Quote functionality to generate custom Quote Reports. As i see we can create new XML templates by making changes to the standard style sheet ASOPRINT.XSL. According to what is mentioned in the oracle quoting guide we can add company logo, change height width etc.. of the report by modifying this style sheet. I need to know how do we cusomize the style sheet to include static text or add new tables etc.. I am very new to XSL so do not have much idea as to where is the data fetched from and where is the static text present.
Thnaks
AMHi,
Thanks a lot for the response. I went through the documents and they mainly talk about customizing the Quote report by including the company logo, Title and disclaimer. How can we add static text to the ASOPRINT.XSl style sheet in order to customize it and attach it to a custom tempalate. I am very new to this so do not have much idea. can we add the static test directly in the style sheet or is it fetched from somewhere?
Regard
AM -
Cannot open customize OAF screen after upgrade to 12.1.3
Hi,
After upgrade to 12.1.3, I am not able top open customize OAF screens from Applications.
By following some documents from MOS, I have done the following.
1)-applied patch 9879989 on Linux server.
2)-I am able to install JDeveloper,open and compile my customize programs from JDeveloper installed on Linux server. I compilation, new *.jpx files created from *.jpr
From Oracle Applications, I am getting the same error that I was getting without compiling customize program.
My question is that, how Oracle applications will read the new compiled program. Do all program need to be in specific unix directory ?
I copied all the customized program under " /u01/oracle/jdev_install_dir/jdevhome/jdev/myprojects" .
I think the problem is now to place OAF files in the problem directory, which I don't know.
Do I need to set environment variable like JDEV_USER_HOME in the environment file ?
Please help.
Best RegardsNot sure if your issue is resolved. Did you compile the java sources in JDeveloper and moved all files from myclasses folder to unix under $JAVA_TOP or appropriate directory and deployed the PG files using xmlimporter?
Thanks
Shree -
We recently upgraded to 2010 professional, and I was pleased to see the team planner view, which was something I was attempting to do in 2007. We are using MS Project 2010 Professional more for resource management than project management. In
fact, we only assign one task per resource per project, just so we can have a clear picture of our resource utilization. For example, if "Joe" is going to work on this project for 50 days, regardless of what he is doing, he goes in at 50 days (and the
duration is calculated based on the percentage he is allowed to work on projects vs. day-to-day work (MAX Units), and the percentage the manager has assigned for him to do this work (Assigned Units). We don't care what "Joe" is doing, just that his time
is booked. We have assigned more than one resource to the same task, and the team planner (unlike the resource usage view), does allow breakdown by resource, and not just by project.
The purpose of this view is to provide management reports (printed/electronic PDF copies), for their weekly meetings to discuss the status of the resources and the impact of any new projects being proposed. So I need to show more info then the basic
info in the default Team Planner View.
I just read another question regarding adding extra columns to this view and was disappointed to discover that cannot be done. I have a shared resource pool with 140 resources and a master project schedule with 50 projects, and I am running the
team planner view against the shared pool. So, like the other person, I wanted to add a column with the project name (since the tasks are similiar in name, it gets confusing if it only shows the task name, as we have no idea which project it is associated
with), as well as add a column for "section" (a custom field created in the resource view so each manager can view his own team), and a column showing Max Units, so we can understand why someone with only 1 task is overallocated. As well, I would like
to customize the task bar to include the Units for that resource (ie. 50%), so I can understand also why he is overallocated or available at glance.
As a workaround for the missing project name, I embedded the name in the task, which is very time consuming and not a real solution, since at any given time I have over 50 projects in the master project schedule.
I hope this is something that is being considered in future, since it makes sense to me that management wants a view of the resource pool by assigned task, by project, and understanding of overallocation.
Trish :)You can create and apply a Group to list all tasks by resource. You could also group by Project then by resource or the other way around. In Proejct 2010 select the View tab, then in the
Group By drop down box select New Group By and select the fields to group by.
If you like teh Group, copy it to your Globa.mpt file using teh Organizer so it's available in all your projects.
Rod Gill
The one and only Project VBA Book
Rod Gill Project Management -
We have a document-level customization solution for Word and are experiencing problems during deployment in an environment running on terminal services. The OS (Windows 2012) is English and Word (2013) is non-English (German).
Installation is done into the "Program Files" folder correctly. But when trying to start a word document linked to the specific template. The "Microsoft Office Customization Installer" pops up with the error.
"There was an error during installation"
From: file:///C:/Programme/[CompanyName]/[Productname]/[Productname].vsto
Downloading file:///c:/Programme/[CompanyName]/[Productname]/[Productname].vsto did not succeed.
Exception: ....
System.Deployment.Application.DeploymentDonwloadException: Download file:///C:/Programme/[Companyname]/Productname]/[Productname].vsto did not suceed. ---> System.Net.WebException: Could not find a part of the path 'C:\Programme\[Companyname]\[Productname]\[Productname].vsto'.
---> System.Net.WebException: ...... ---> System.IO.DirectoyNotFoundException......
The problem seems to be that the installer is looking for C:\PROGRAMME instead of C:\PROGRAM FILES. C:\PROGAMME is the German localized name of PROGRAM FILES (http://en.wikipedia.org/wiki/Program_Files).
The installer installs the solution correctly deployed into c:\program files, but when the later a user tries to start it and the Microsoft Office Customization Installer is called, it tries to access the non-existing "c:\programme" folder. This
doesn't exist, because Windows is English.
Is there any thing related to deploying solutions on a platform which has different languages (mixing/matching of OS language and Office language?)
Thank you for your helpHello,
1. First, I would confirm with you whether you dealt with the localization for your document-level add-in?
2. Did you use this way to define the Create a class that defines the post-deployment action part of Put the document of a solution
onto the end user's computer (document-level customizations only) and did you get the path with Environment.SpecialFolder enum?
To handle this, I would recommend you consider using Environment.SpecialFolder to set that property.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
No longer able to fully customize?
Follow up to closed thread https://support.mozilla.org/en-US/questions/985948
I have been happily using firefox since ages, although I've never liked the idea nor felt the need of frequent updates. Last January I did the move from 3.6 (aka 10) bundled with my Linux SuSE version to the latest version 28 (that was mainly done to fix a mishap on google maps which after all proved instead to be due to some bad cookies). At the same time I considered also chrome but did not like it. I struggled a bit to reintroduce some nice features I liked (tabs on bottom, text only buttons in menu bar, status bar) than I was reasonably happy and even added some nice plugins. I even found the way in about:config to reduce the ANNOYING frequency in which I was asked to update to a new version.
And so far did not update
This morning BY CHANCE I hit the update button instead of the "ask later", and found myself in version 31 with an APPALLING GUI without menu bar, and without access to some of the plugins (although they appeared to be compatible and active) including the very useful Session Manager. The immediate solution to continue work was to REVERT TO THE BACKUP of firefox 28.
Then I quietly checked the net for resources and experiences, and found that a lot of long-time firefox users do not like the new interface, that apparently there are ways to restore SOME BUT NOT ALL of the old nice features which were unexplainably suppressed. I also learned of the existence of PaleMoon.
I would like to EXPRESS MY IRRITATION for the changes in the UI without a clear notice, or a clear way to revert in full to the previous behaviour.
In the next days, when time allows, I will do (on a fresh separate installation) a thorough check of what is and is not customizable in firefox 31 as well as in PaleMoon, and do my final choice. But what I read so far about PaleMoon is inspiring me to switch over ...Hi,
The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
If you want to leave feedback for Firefox developers, you can go to the Firefox ''Help'' menu and select ''Submit Feedback...'' or use [https://input.mozilla.org/feedback this link]. Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues. -
Adobe Muse - Menu Bar Customization
I am new to muse and have made a couple of test sites. I am not working on my first Muse site and running into the problem of customizing my menu bar. The bar no longer shows up as 4 different sections. It comes up as one big one. How do I add more sections to my menu bar and how do I change the name? Is there a way to Make the Menu an Image almost like a Photoshop button but have a Pull Down Menu. Is it possible to have a Pull Down menu?
Thanks!When you drag a menu to the web page it replicates the your plan view, to show the child pages you will have to choose 'All pages' as the menu type by clicking the on the small blue icon. If you want to customize the menu the way you want you can use the option of the manual menu.
- Abhishek Maurya -
? to Customize Sap GUI Logon Pad
Hello all,
How can i customize Sapgui logon pad with own Logo instead of Default Logo.
Thanks in advanace,
RahulHi Markus When we click on Logon Pad SapGUI 710
On the System Tab right hand side we have Viriable logon
below to that We had a Logo Indicating Orange & Blue arrow
How can i change to my own Logo.
Cheers,
Rahul -
How to customize the table layout in WAD (BI70)
hi experts,
i want to customize the table layout in WAD.
in 3.5, i can set the table interface class,and use T_Code se24.
but now i am using BI7.0, there is no table interface, so how can i customize the table layout?Use report designer for customerizing.
-
Deploy customize workflow takes a long time to show up in application
Hi,
This is the first time (newbie) i am customizing and deploying work flow in ebiz(R12), the problem that I am facing is that after I deploy the customize workflow it takes a long for the ebiz to pickup/show the changes.
What I did was to customize a standard workflow and save it back to database. I have tried retrieving the customize workflow to make sure that the workflow was save into database (not a access problem). After about a day then the customize workflow shows up (I used the 'status diagram' to see the workflow progress). Have already tried restarting the server, clearing out the cache but the customization still does not take effect (will only take effect the next day) . Am i missing a step ?Hi,
Unless you are specifying an effective date in the future when you deploy the definition, the new version should become available immediately. Any existing workflow processes will continue to run using the definition that was valid when the process started, but any new processes will use the new definition.
If this is not happening, then I would urgently raise a service request with Oracle support, as you are experiencing something very different from the expected functionality.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com -
How to let other users use my customization?
Hello,
I have a few nice dynamic pages with bind variables.
I use the user PORTAL to customize my bind variables, but what I customize is not for other users, they see the result of the default bind variables.
Surely there is a way to set the customization from a designer for the whole comunity. My question is how to pull that off.
Thanks for any information in advance.
Kind Regards,
Arnoud M. BarthHi,
You can set customizations at the system level by clicking on the edit defaults link of the portlet. This changes the default values of the portlet. In 309 or release 1 clicking on the edit page will show you the edit defaults link on the right hand corner of the portlet. In case of 902 or release 2 each portlet has a actions icon. Clicking on that will bring you a list of actions you can perform on a portlet. You will have "Edit Defaults" link here.
Thanks,
Sharmila -
Wlp10/wls10: Remote access to Portal Customization
Hi!
I am developing a portlet that will be used to customize some portal content in the same domain, but in a different server environment (A preview environment will be used to let users with an editor role publish some portal inventory items to the production environment).
To do this, I am using the com.bea.netuix.application.persistence interfaces with:
final CustomizationContext ctx = new CustomizationContext(request.getLocale(), request);
ctx.setVisitorMode(false);
ret.setCustomizationContext(ctx);
final Hashtable<String, String> env = new Hashtable<String, String>();
env.put(javax.naming.Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
if (url != null) {
env.put(javax.naming.Context.PROVIDER_URL, url);
//env.put(javax.naming.Context.SECURITY_AUTHENTICATION, "Simple");
env.put(javax.naming.Context.SECURITY_PRINCIPAL, "weblogic");
env.put(javax.naming.Context.SECURITY_CREDENTIALS, "*********");
initialContext = new InitialContext(env);
final PortalCustomizationManagerHome pcmh = (PortalCustomizationManagerHome) initialContext.lookup(
ApplicationHelper.getVersionedAppName() + "." + PortalCustomizationManagerHome.LOOKUP_NAME);
ret.setPortalCustomizationManager(pcmh.create());
initialContext.close()
...The url follows the pattern "t3://server/port"
Invocation is
final PortletView doppelgaenger = deployManagerManager.getPortalCustomizationManager().getPortletView(
deployManagerManager.getCustomizationContext(), child.getPortletInstanceId());The result is an exception:
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators]
at weblogic.security.service.SecurityServiceManager.seal(Unknown Source)
at weblogic.security.service.SecurityServiceManager.getSealedSubjectFromWire(Unknown Source)
at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:316)
at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:850)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:314)
at weblogic.rmi.cluster.ClusterableServerRef.dispatch(ClusterableServerRef.java:236)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:1084)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:1001)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:230)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:877)
at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:446)
at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:368)
at weblogic.socket.AbstractMuxableSocket.dispatch(AbstractMuxableSocket.java:383)
at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:872)
at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:818)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:130)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)We have played around with cross domain security mapping, but could not fix the problem.
I guess that I have to do the access somehow differently or some configuration is missing... any ideas?The goual is SAP(Waldorf) achieves http:
sapeff.ku.norikom.tu:50001
Of course http:
sapeff.ku.norikom.tu:50001is achievable from our network.
The error SAP(Waldorf) gets is :
"DESTINATION: /H/sapserv1a.wdf.sap.corp./S/3295/H/193.71.150.78/S/P/QnIKoiIHWE/H/192.168.21.128/S/3299/H/sapeff.ku.norikom.tu/S/50001
DESTINATION PORT:3299
LOCATION:Saprouter (Using third part library) on sapserv1
ERROR : TIMEOUT OCCURED
TIME: WED MAR31 17:02:34 2010
RELEASE: 620
COMPONENT :NI(Network Interface)
VERS
What could be cause of this error? -
How to customize the logout page in release 2?
In release 1 I customized the login page and the change password page using the example provided by John Riggs. Now in release 2 there is a logout page that we also need to customize. LOGIN_URL in the table WWSSO_LS_CONFIGURATION_INFO$ is 'UNUSED UNUSED UNUSED' by default. I assume that the third UNUSED should be changed to point to the procedure that generates the (custom) logout page.
Which input parameters does a logout-page-procedure need to have?
Does anyone have some example PL/SQL code?Thanks Malin! The note, 191345.1, seems to be exactly what I'm looking for.
However, I just can't make it work.
When I try to deploy my .war file I get the follwoing error message:
Failed to deploy web application "mysso". Jar file: /tmp/jar45493.tmp is missing its standard xml descriptor located at WEB-INF/web.xml
My war file does contain a web.xml file! Here's the listing of the .war file:
0 Mon Oct 07 13:53:12 PDT 2002 META-INF/
62 Mon Oct 07 13:53:12 PDT 2002 META-INF/MANIFEST.MF
184 Mon Oct 07 13:52:36 PDT 2002 META-INF/web.xml
32 Mon Oct 07 13:52:36 PDT 2002 logout.jsp
The content of web.xml is listed here:
<?xml version="1.0"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN" " " target="_new">http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
</web-app>
The web.xml file is located in the ./META-INF folder. The filename is in lower case...
Is the content wrong?
Any ideas??
Maybe you are looking for
-
IPhone Not Syncing to iTunes, despite re-install
Hi, I was having problems with iTunes on a Mac recognising iPhone, iPad, etc. Had tried all suggested fixes and eventually re-installed iTiunes (and removed various pref files, which solved the problem. HOWEVER, a day later the problem has returned
-
FCE HD, confused by Motion Path (I want to change the speed of movement)
I am a huge FCE noob, let's get that out of the way. I have also been a member here since May of last year, but for some reason it now shows that this is my first post. (????) Anyway, I have figured out how to use a motion path, including curving the
-
Enhancements are not visible in different clients
Hello Experts, I am facing a strange issue in my compoenent enhancements for IUICMD. I have created an enhancement set ZCRM_IUICMD and assigned it to different clients thorugh BSPWDV_EHSET_ASG. All my enhancements to componenet are attached to the a
-
I'm really getting insane. I got the Creative Cloud from my boss and the permission to use it at home - great! So I try to work myself into all the new stuff since I've used CS4 prviously. But all the tutorial videos load extremly slow and most of th
-
Strange ADF behaviour: duplicated lookup references
Hi, I'm developing a JSP - Struts - ADF BC application with JDeveloper 10.1.2.1.0 (1913). I have the following issue: I have a ViewObject based on three EntityObjects, one updatable and two as reference. Say the ViewObject is based on the Main Entity