Saplicense -get: error while loading shared libraries: libsapu16.so
Hi,
I installed the SAP NetWeaver04s test drive on a 64bit Linux.
After the command /usr/sap/N4S/SYS/exe/run/saplicense -get I got the error:
/usr/sap/N4S/SYS/exe/run/saplicense: error while loading shared libraries:
libsapu16.so: cannot open shared object file: No such file or directory
The library libsapu16.so is in /usr/sap/N4S/SYS/exe/run/. I checked also the user rights of n4sadm and the $PATH variable. I think its all okay. What is the problem?
Thanks,
Roland
Hi Markus,
Itu2019s a really stupid mistake. I changed the shell of n4sadm to bash, because the csh wasnu2019t installed. In the ~.bashrc the LD_LIBRARY_PATH is not included but in the ~.cshrc. After installing csh and changing the shell of n4sadm to csh the problem is solved.
Thanks,
Roland
Similar Messages
-
Error while loading shared libraries: libsapu16.so
Dear All
For SAP NetWeaver 2004s - TestDrive as user n4sadm
I am trying to get my hardware key by executing /usr/sap/N4S/SYS/exe/run/saplicense -get
as soon as I execute the command /usr/sap/N4S/SYS/exe/run/saplicense -get
It thrown an error
/usr/sap/N4S/SYS/exe/run/saplicense: error while loading shared libraries: libsapu16.so: cannot open shared object file: No such file or directory
I am installing on Fedora C10 and the kernel version is 2.6.27.9-159.fc10.x86_64
Any help is highly appreciated
Regards
SunilHi Pankaj
Tx for the reply, Its been resolved.
I had installed csh shell, that is missing in my Linux
Thanks
Sunil -
Niping: error while loading shared libraries: libsapu16.so
Hi SAP gurus,
when trying to implement note # 500235, I got this error message on a Linux system:
./niping: error while loading shared libraries: libsapu16.so: cannot open shared object file: No such file or directory
I know I have to add the library's path to LD_LIBRARY_PATH environment variable, but where is the path?
I'm using SuSE Linux 9
Thanks,
Antoniook... that solved the library problem.. thank you..
now I'm having a connection refused error message:
***LOG Q0I=> NiPConnect2: SiPeekPendConn (111: Connection refused) [nixxi.cpp 8724]
ERROR => NiTClientLoop: NiConnect (rc=-10) [nixxtst.cpp 2632]
ERROR partner not reached (host 10.1.206.20, service 3298)
TIME Mon Mar 12 12:18:22 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi.cpp
LINE 8724
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 1 -
While booting linux VM getting error "error while loading shared libraries
Hi Expert,
while booting Oracle linux Virtual Machine getting error "error while loading shared libraries: libpopt.so.0 cannot open shared object file" no such file or directory
Now i am unable to boot linux, any help appreciated.
Note: Its Oracle Linux 5.8 x86_64 under Oracle VirtualBox
Edited by: IgnitedMind on Apr 30, 2013 7:12 AM
Edited by: IgnitedMind on May 1, 2013 12:04 AM
Edited by: IgnitedMind on May 1, 2013 12:06 AMWithout knowing what you have installed or what modifications you have done it is not possible to say what goes wrong. Like I previously mentioned, you may have installed an incompatible version of a core system library. Sorry, I'm not going to read any installation manual to find out what you might have done wrong. You may need to reinstall the complete system or just the popt installation package.
Based on my experience people sometimes seem to misunderstanding the concept of software version requirements, which are always minimum version requirements and does not mean, for instance, software made for gcc 4.1.10 does not work under 4.1.12. You cannot simply upgrade or downgrade core system libraries without affecting the installed system. Using YUM to install software will check this and prevent you from breaking your system. RPM does not check any dependencies and hence can break your system beyond repair. -
Error while loading shared libraries
error while loading shared libraries
I just installed 10g . on a Fedora Core 4 machine and after a reboot I tried to run sqlplus and got this type of error. I also got the same error when trying to lsnrctl status ...
[oracle@localhost ~]$ sqlplus
sqlplus: error while loading shared libraries: /apps/oracle/product/10g/lib/libnnz10.so: cannot restore segment prot after reloc: Permission denied
[oracle@localhost ~]$
declare -x CLASSPATH="/apps/oracle/product/10g/JRE:/apps/oracle/product/10g/jlib:/apps/oracle/product/10g/rdbms/jlib"
declare -x EDITOR="vi"
declare -x G_BROKEN_FILENAMES="1"
declare -x HISTSIZE="1000"
declare -x HOME="/home/oracle"
declare -x HOSTNAME="localhost.localdomain"
declare -x INPUTRC="/etc/inputrc"
declare -x KDEDIR="/usr"
declare -x LANG="en_US.UTF-8"
declare -x LD_LIBRARY_PATH="/apps/oracle/product/10g/lib:/lib:/usr/lib"
declare -x LESSOPEN="|/usr/bin/lesspipe.sh %s"
declare -x LOGNAME="oracle"
declare -x LS_COLORS="no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:"
declare -x MAIL="/var/spool/mail/oracle"
declare -x OLDPWD="/home/oracle"
declare -x ORACLE_BASE="/apps/oracle"
declare -x ORACLE_HOME="/apps/oracle/product/10g"
declare -x ORACLE_SID="TST2"
declare -x ORACLE_TERM="xterm"
declare -x PATH="/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin"
declare -x PWD="/home/oracle"
declare -x QTDIR="/usr/lib/qt-3.3"
declare -x SHELL="/bin/bash"
declare -x SHLVL="1"
declare -x SSH_ASKPASS="/usr/libexec/openssh/gnome-ssh-askpass"
declare -x SSH_CLIENT="::ffff:192.168.1.152 2503 22"
declare -x SSH_CONNECTION="::ffff:192.168.1.152 2503 ::ffff:192.168.121.8 22"
declare -x SSH_TTY="/dev/pts/2"
declare -x TERM="xterm"
declare -x TMP="/home/oracle/tmp"
declare -x TMPDIR="/home/oracle/tmp"
declare -x USER="oracle"
[oracle@localhost ~]$
Any input would be highly appreciated.
Thanks
Ambrosiusyap. got it..
disabled SELinux then run it.
I didn't get any errors and have it up and running. Here is what I did:
Full Fedora Core 4 install with SELinux enabled (default settings). Then, after install, disable SELinux in the /etc/selinux/config file.
Thanks
Ambrosius -
Hi,
I installed Oracle 10g on RHLinux AS4. I created a initOEMREP.ora file
in $ORACLE_HOME/dbs.
my .bash_profile file is,
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
#Added on 05-feb-2008
#For oracle1g db installation
export ORACLE_SID=OEMREP
export ORACLE_BASE=/home/app/oracle10gdb
export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1
export PATH=$ORACLE_HOME/bin:$PATH:.
export LD_LIBRARY_KERNEL=$ORACLE_HOME/lib
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TMP=/home/tmp
export TMPDIR=/home/tmp
While
$sqlplus "/as sysdba"
I am getting
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 6 21:27:08 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
oracleorcl: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
Please help me to solve this.
Regards,
MathewHi,
THank you for the replay. Where will I get this package?
Regards,
Mathew. -
Sqlplus: Error while loading shared libraries: libsqlplus.so:
Hi
The Error is as follows:
sqlplus: Error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory
Installed R12 with RUP2.
User Oracle already exists.
I tried to create a user appsdev as follows:
#adduser appsdev
#passwd appsdev
#cd /home
#chmod 500 appsdev
login as user appsdev/appsdev
run the env file from $ORACLE_HOME
$sqlplus
sqlplus: Error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory
if run the env file and sqlplus from user ORACLE.i don't get the error.
but from the appsdev user i get the error.
what should i do to execute sqlplus successfully from appsdev user.
regards,
charanif run the env file and sqlplus from user ORACLE.i don't get the error.
but from the appsdev user i get the error.Is the "appsdev" user the owner of the application tier? If so, source the env file under %APPL_TOP% and check then.
Did you specify the dba group as the primary group for "appsdev" user? -
I got the following error
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.4681/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Tuxedo 9.1 base installation complete
when tried to install Tuxedo 9.1 on unbreakable Linux 5. I am trying to install Peoplesoft.
I found this error is pretty common, not necessary appear when installing Tuxedo. I am searching around and a lot of people saying to comment out the line
export LD_ASSUME_KERNEL
The problem is I don't know which in which file I need to do it. Has anyone have the encountered the similar problem before? Thanks.After reading the installation script, I figure out which is the evil file. I just post it here so if someone get into this problem in the future, he can fix it.
Here is the solution:
Assume you are at the directory where the install.sh is. Do the following:
-bash-3.1$ cd linux/sles9/base
-bash-3.1$ cp tuxedo91_32_SLES_9_x86.bin tuxedo91_32_SLES_9_x86.bin.bak
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
-bash: tuxedo91_32_SLES_9_x86.bin: Permission denied
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
Then run the installation script
sh install.sh and be happy as I am now!!!! -
Hi
I copied across an /opt folder from a Redhat 9 server that has Oracle 9.2.0 to a Redhat AS 4. I then set the oracle variables, hoping after that I can get the database up and running. However I get this error, when trying to start the listener or sqlplus:
lsnrctl: error while loading shared libraries: libclntsh.so.9.0: cannot open shared object file: No such file or directory
Is this library part of a certain RPM? Where can I get this RPM or this lirary?
Thanks.I copied across an /opt folder from a Redhat 9server that has Oracle 9.2.0 to a Redhat AS 4.
So you are saying that you copied the whole
ORACLE_HOME to a new server?? Are you using same
username/group on new server?? Did you relink the
binaries after copying it? What is the output of ls
-l on ORACLE_HOME dir and as what user you are
running lsnrctl command??
Daljit SinghYes I copied the folder that has Oracle_Home and datafiles.
i have created the oracle user.
How do I relink the binaries?
I run it as oracle. -
Hi,
I'm installing Oracle 9i on IA 64, OS linux. I keep getting the following error when I run sqlplus
oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared object file: No such file or directory
ERROR:
ORA-24314: service handle not initialized
the LD_LIBRARY_PATH=$ORACLE_HOME/lib
is set in the environment. After this error it prompts me for a user name?
RegardsHi Ruben
Before starting please make sure you have maintained all env for sidadm
commands may vary depending on os in case
Whenever I start SAPINST I set following before hand
TMPDIR=/usr/sap/install/SRA_CI : just a log directory
export TMPDIR
LD_LIBRARY_PATH=/usr/sap/sapmnt/SRA/exe
export LD_LIBRARY_PATH
umask 022
JAVA_HOME=/usr/sap/java
export JAVA_HOME
PATH=$/bin:$
export PATH
SAPINST_JRE_HOME=/usr/sap/java
export SAPINST_JRE_HOME
Hope this helps
success!! -
Ops center 12c installation last stage we are getting below error :
INFO: starting new satellite SMF services
satadm: Enable HTML redirect
satadm: Disabling application/scn/ec-server-splashpage
/opt/sun/xvmoc/bin/svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: application/scn/ec-server-splashpage failed to stop
satadm: Starting Enterprise Controller with SMFlite...
svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: Error enabling Enterprise Controller run-time milestone svc:/application/scn/satellite-enable:default (rc=127)
Error: starting satellite services
Command: /opt/sun/xvmoc/bin/satadm start -v -w
Exit code: 1
Output:
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.14112.
t. Try this step again (correct the failure before proceeding)
x. ExitHi Valentin
The copy error occurs when you try to copy the files to the main OS that has allocated the VM ?
Because another option is to get those files toward the VM across and ftp server. You could use
an ftp server installed in the main machine or in the network where you are connected o inclusive from
your mail if you have connection to internet.
Joel Perez
Oracle Ace Member
DBA Oracle -
Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AMa step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed. -
Error while loading shared libraries: libpng12.so.0
Am trying to install Rockbox installer. After running the app, I get the following error:
error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
I have already installed libpng12 earlier this month for another application through AUR and that worked fine.
Where do I start?
thanksRockBox is an aur package? Does the aur package compile it from source? If it does, you should just be able to recompile. If its doing something funny and trying to download a prebuilt binary you may be out of luck on that one. The libpng12 package from AUR is installed on your system?
-
So, I have a sligtly old computer that I use web browsers like midori on, because they are good for slow computers. Whenever I launch dwb or midori or luakit from the launcher in the Gnome shell, nothing happends. When launching from the terminal (dwb here, it happens for all three) I get:
dwb: error while loading shared libraries: /usr/lib/libwebkitgtk-1.0.so.0: file too short
and when installing packages I get:
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so is empty, not checked.
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so.0.16.10 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so.0 is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so.4.3 is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so.0.22.8 is empty, not checked.
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so.0 is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so.4 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so.0 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so is empty, not checked.
The package installs, and then this prints out.
What can I do to fix it?
Note: this happened after a system update
Last edited by dubble (2014-06-04 20:42:09)Alright, I read the thread and preformed
sudo pacman -Syyf <all packages updated>
but the option wasn't found (-f)
so i did
sudo pacman -Syyu <all packages updated>
and it spit out several hundered lines consisting of:
webkitgtk2: /usr/share/webkitgtk-1.0/images/panIcon.png exists in filesystem
except with different packages and files
help? -
Hello
While starting a few games(for example Spring and Tremolous) I get the following error:
error while loading shared libraries: libopenal.so.0: cannot open shared object file: No such file or directory
and the start interrupts. How to start these games?skottish wrote:
eldragon wrote:
skottish wrote:Does tremulous build off of the source code? If so, rebuild it against the newer openal. Symlinking libraries is a very bad idea.
could you explain further? there must be something im missing
The best way to do it in my opinion is to grab the tremulous build files using ABS:
http://wiki.archlinux.org/index.php/ABS
Once abs is installed and run, the tremulous file will be located in /var/abs/community/games/tremulous. Copy the tremulous folder to somewhere where you have write permissions, enter the directory, change pkgrel=4 to pkgrel=5 in the PKGBUILD, and run makepkg. If all goes well you'll have a new package in that directory after it's done compiling. Then you can install it by running 'pacman -U <whatever the file that ends in .pkg.tar.gz>.
i was talking about the dangers of symlinking libraries actually...
Maybe you are looking for
-
Unable to watch rendered video
I can watch video in real time preview on out monitor but unable to watch rendered video. It is just like a unsynchronized video. What may be the cause?
-
How to Access Custom Event using AS3?
Hi All, Maybe it's that its Monday morning and my brain is still foggy, but I can't seem to figure out how to set custom events using AS3. I have a custom GridRow itemRenderer, and have declared the event using the appropriate metatags. Then I create
-
When i click on an item from a search i go to an unrelated page.
When I search in the browser for example Global Industrial, I get a list of choices. I pick the one that I want and what I get is a redirect to another unrelated site. This happens whether I use Bing of Google. It also happens with IE8. I have tried
-
[B75MA-P45] UEFI Bio Version [E7798IMS.1xx]
E7798IMS.160 ===> E7798IMS.176 Beta Bios VGA BIOS : 2137 GOP : 3.0.14.1015 ME Version : 8.1.40.1416 LAN OptionRom : 2.41/1.24 UEFI:2.008 01. Switch to PLL mode for clock buffer. 02. Fix can't detect LSI 9270-8i RAID card. 03.
-
No Name Display under Lock Mode
When my Blackberry Curve 8900 is locked and I get an incoming call, I do not see the incoming caller's name displayed. I just see the number. In the past I did not face this issue. Is there some setting I need to change on the instrument or I need he