SAPLOGON_ID not found in saplogon.ini while executing BEx

Hello All,
We have recently moved to Windows 7.
My SAP systems are working fine. However, when we try to use BEx applications, we are getting the following Error Message:
Error Group
RFC_ERROR_PROGRAM
Message
SAPLOGON_ID 'GMAM BW PRODUCTION' not found in saplogon.ini
Please advice.
Regards
Sneha

I had the same issue with SAP Logon 7.30 patch 11, have looked in everything: internet, SAP Notes (1709502 for version 7.30), reinstall SAP from scracth, applied all patches available (11 so far) and nothing.
In the end I just removed the 'incorrect' entry and create again from scratch and voila, no more error.

Similar Messages

BEx Analyzer :SAPLOGON_ID 'SAP BW7' not found in saplogon.ini

Hello,
The BEx Analyzer can't connect to my BW System , I got the following error:
Error Group
RFC_ERROR_PROGRAM
Message
SAPLOGON_ID 'SAP BW7' not found in saplogon.ini
The following is the copy of saplogon.ini:
=================
[Configuration]
SessManNewKey=2
[EntryKey]
Item1=
[Router]
Item1=
[Router2]
Item1=
[RouterChoice]
Item1=0
[Server]
Item1=xxx.xxx.xxx.com
[Database]
Item1=01
[System]
Item1=3
[Description]
Item1=SAPBW7IDES
[Address]
Item1=
[MSSysName]
Item1=BW7
[MSSrvName]
Item1=
[MSSrvPort]
Item1=
[SessManKey]
Item1=-1
[SncName]
Item1=
[SncChoice]
Item1=-1
[Codepage]
Item1=1100
[CodepageIndex]
Item1=5
[Origin]
Item1=USEREDIT
[LowSpeedConnection]
Item1=0
[Utf8Off]
Item1=0
[EncodingID]
Item1=DEFAULT_NON_UC
[ShortcutType]
Item1=0
[ShortcutString]
Item1=
[ShortcutTo]
Item1=
[ShortcutBy]
Item1=

I had the same issue with SAP Logon 7.30 patch 11, have looked in everything: internet, SAP Notes (1709502 for version 7.30), reinstall SAP from scracth, applied all patches available (11 so far) and nothing.
In the end I just removed the 'incorrect' entry and create again from scratch and voila, no more error.

Can't do online banking. Get error message. "The requested URL /Summary.cgi was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Hi,
These blog posts might help debug problem
Oracle APEX: Got a 404 Not Found? | Inside Oracle APEX by Patrick Wolf
daust_de :: Oracle XE / APEX: Troubleshooting the 404-not found error on XE
Regards,
Jari

Kinit: Client not found in Kerberos database while getting initial credentials

Hi all,
I am trying to configure application which uses Kerberos authentication.
Error message:
kinit: Client not found in Kerberos database while getting initial credentials
I use Windows Server 2003 domain controller as LDAP server, Tomcat application (on Linux) and IIS application as client, and apache load balancer.
There is multidomain environment: russia.domain.net, europa.domain.net, asia.domain.net;
Tomcat and IIS servers works behind a proxy server (Apache on Linux).
For applications created two DNS records type A. all DNS use IP address of Apache proxy server:
application-sandbox.russia.domain.net
applicationweb-sandbox.russia.domain.net
To confiure kerberos authentication i have performed the following steps:
1. Create user account in EUROPA domain and configure delegation for this:
EUROPE\application_sandbox
2. Register SPN for this account:
setspn -A HTTP/application-sandbox.russia.domain.net EUROPE\application_sandbox
setspn -A HTTP/application-sandbox EUROPE\application_sandbox
3. After i verified registered SPN for this account:
setspn.exe -L EUROPE\application_sandbox
Registered ServicePrincipalNames for CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net:
HTTP/application-sandbox
HTTP/application-sandbox.russia.domain.net
3. After i generate a keytab file:
ktpass /princ HTTP/application-sandbox.russia.domain.net:@RUSSIA.DOMAIN.NET /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass Pa$$w0rd
4. Properties of account looks like the following:
Get-ADUser -Identity appication_sandbox -Properties CN, ServicePrincipalNames, UserPrincipalName
CN : kxxb999
DistinguishedName : CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net
Enabled : True
GivenName :
Name : kxxb999
ObjectClass : user
SamAccountName : application_sandbox
ServicePrincipalNames : {HTTP/application-sandbox, HTTP/application-sandbox.russia.domain.net}
Surname : application_sandbox
UserPrincipalName : HTTP/[email protected]
4.Note that CN and User logon name are different. SPN registered for DNS record.
There are no computer in domain with name application-sandbox.russia.domain.net. this is a DNS record for application.
5. Then i copy keytab file to Linux machine, configure krb5.conf file and trying to get TGT for registered principal name.
krb5.conf file:
[libdefaults]
default_realm = EUROPE.DOMAIN.NET
dns_lookup_realm = false
dns_lookup_kdc = false
default_tkt_enctypes = rc4-hmac
default_tgs_enctypes = rc4-hmac
[realms]
RUSSIA.DOMAIN.NET = {
kdc = dc01.russia.domain.net
admin_server = dc01.russia.domain.net
default_domain = russia.domain.net
EUROPE.DOMAIN.NET = {
kdc = dc01.europe.domain.net
admin_server = dc01.europe.domain.net
default_domain = europe.domain.net
[domain_realm]
europe.domain.net = EUROPE.DOMAIN.NET
.europe.domain.net = EUROPE.DOMAIN.NET
russia.domain.net = RUSSIA.DOMAIN.NET
.russia.domain.net = RUSSIA.DOMAIN.NET
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
Then i verified created keytab file:
klist -e -k -t application_sandbox.keytab
Keytab name: FILE:application_sandbox.keytab
KVNO Timestamp Principal
0 01/01/70 01:00:00 HTTP/[email protected] (arcfour-hmac)
And trying to get TGT ticket:
kinit -V -k -t application_sandbox.keytab HTTP/[email protected]
Using default cache: /tmp/krb5cc_0
Using principal: HTTP/[email protected]
Using keytab: application_sandbox.keytab
kinit: Client not found in Kerberos database while getting initial credentials
But if i use SamAccountName name with kinit commant then i can aquire TGT ticket:
[root@localhost security]# kinit application_sandbox
Password for [email protected]:
[root@localhost security]# klist
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: [email protected]
Valid starting Expires Service principal
06/30/14 16:37:41 07/01/14 02:37:38 krbtgt/[email protected]
renew until 07/01/14 16:37:41
I'm in trouble. can anyone faced this problem?
Thank you

Hi all,
according to Amy answer I thought, how user principal could not be found in Kerberos database, e.g AD domain.
My HTTP service works in RUSSIA domain, but user principal created in EUROPE domain.
Next, i have checked my ktpass command:
ktpass /princ HTTP/[email protected] /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass
Pa$$w0rd
especially the following parameters:
/princ HTTP/[email protected]
/mapuser EUROPE\application_sandbox
When generating keytab it changes userlogon name to HTTP/application-sandbox.russia.domain.net and set domain domain to RUSSIA.DOMAIN.NET
But no user principal with name application_sandbox in RUSSIA.DOMAIN.NET domain (e.g. Kerberos realm)
So solution is change RUSSIA.DOMAIN.NET to EUROPE.DOMAIN.NAME in ktpass command.
After that i am able to get TGT and authenticate in domain.

404 Not Found error was encountered while trying to use an ErrorDocument to handle the request

When I try to go to my website, I get a blank screen and this message:
Method Not Implemented
GET to / not supported.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Can anyone help me fix this bug, please? Thanks!

I did as you said and it worked magic! I didn't even have to restart Mozilla. Thank you so much for your help! :-)

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Javascript Error while executing BEx querry from browser

Hi Folks
We have been getting a number of Javascript errors while executing BEx querries from the browser.
The various errors that we have been getting are:
'SAPBWItemCatalog' is undefined
'SAPBWJSgdo' is null or not an object
'SAPBWShortCutCatalog' is undefined
We have already looked at SAP Note 783496 and validated the solution.
Is there some specific settings that needs to be maintained for this?

Hi Sandip,
Just spent 2 hours chasing this one so I know how frustrating it is.
Solution:-
Check mime service in SICF - dafault_host/sap/bw/mime - if it's greyed out activate it.
Regards
Nev

Number range interval not found for object ISH_NLEI in executing NP38

Dear ALL,
In executing Transaction NP38 when we save the surgical procedure codes the system
generates an error message "number range interval not found " . The object referred here
ISH_NLEI number range has already been defined in spro Define technical number range.
Please assist what should be done here to resolve the problem.
Regards
Ramit

Hi, check if it maintained in tcode snro for this object

Error: Document not found. (WWC-46000) while updating a form whit blob items

Hi all,
I have to manage a table-based form. The table has a BLOB field that allows NULL.
The blob field of the form is hidden.
When I try to INSERT all works well but when I attempt to UPDATE I get "Error: Document not found. (WWC-46000)".
Have you some suggestions ?
Thanks,
Antonino
p.s. Oracle Portal 3.0.7.6.2 / NT

I have the same problem. I have one form to insert file (works fine), and another form to update that record, but not the file. The fields of the file (blob and mime type) are not on the form at all, and getting the message WWC-46000.

'FROM keyword not found where expected'error while Inserting into Text file

Hi,
I have created a simple interface for testing purpose. All it has to do is to Read the data from a Source Text file and put it into another text file (exactly the same headers as that of source) ...
I am using Oracle as my staging area.
But at 'Insert column Header' Stage, it gives me a warning 'FROM keyword not found where expected' and when it goes to the next step 'Insert Rows' it gives me the same error 'FROM keyword not found where expected' and aborts its execution.
I checked the query for insertion and found nothing wrong in it (FROM Statement is just where it is expected, that is) but somehow its not working.
Can somebody help me out as i have done it before on other Installations and dont know why it is occuring that too for the simplest thing in ODI ...
Regards,
Nitesh.

Probably you missed the concat operator.
select rpad(nvl(lu_parid,' '),1,19)|| v_comma ||
rpad(nvl(lu_class,' '),1,3)
from temp_te07

Error while executing BEx Query on Composite Provider

Hi,
We have a BW on-HANA system, patch level SAPKW73105.
We have created a Composite provider based on the union of two DSOs, two infoobjects, one SPO, and there are a couple of joins with two other DSOs, on the top of that we built a BEx query.
While executing the BEx query, sometimes (depending on the filter values), We got the following error message
"Attribute engine failed;Error executing physical plan: exception 6900: AttributeEngine/Parallel/DimensionFilter.cpp engine failed; $function$=getValidFemsPA;"
"Error 6,900 has occurred in the BWA/SAP HANA server"
"Error reading the data of InfoProvider @3ZSDRPCP5"
"Error while reading data; navigation is possible"
"Row: 59 Inc: MAP_TREX_EXCEPTION Prog: CL_RSDRH_TREX_STORAGE"
(Attached error message)
Ii We browse the composite provider data using the "display data" option in the RSA1, data is displayed without issue, the problem only appears during the BEx query execution and only with some filter vaues.
Any idea on how to fix the issue.
Thanks,
Federico

He's on 7.3 EhP1, which is on SPS12 today. It got pretty stable by SP08, SP09. SP05 was pretty early on, and had a lot of bugs in the HANA views.
7.4 is on SP07 like you say, and most of our customers run at least SP06 - before then, you had to apply a bucketload of SAP notes. I would recommend customers apply SP08 with care because it's a feature release so will have a bunch of new features, which will no doubt need corrections.

Error while executing BEX query via FM

Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikesh

the key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date

Error while executing BEx query made on Multiprovider having Virtual cube

Hi All,
We are getting an error message while executing a BEX query made on Multiprovide which consist of a Virtual Infocube infocube which extracts data from APO Live Cache, the error which we get is as below
''Error Reading the data of the infoprovider ZSS_R054
Error in Substep
Errors have occured while extracting data from datasource 9A_E2E_FC2
Errors occured during parallel processing of query 4, RC:3
Error while reading data; navigation is possible''
And also when tried to execute from RSRT , it gets executed in debug mode in TRY and CATCHE
Please let us know if anyone faced a similar situation or can suggest me what to do.
Please suggest.
Thanking you in advance.
regards,
ajay

Hi Ajay,
Try RSRV transaction, Select All Elementary Tests, Select query, now drag both these items on the right hand pane, select your query from this popup. and execute.
Let us know what the result is.
regards,
Sree.

Error while executing Bex Query

Hi all,
i am getting error while executing the Bex Query.i am able to change and save the Query without any issues.
Error:
<internal error> Receiving from the BW server failed.BW server raised exception:SYSTEM_FAILURE
Do you want to see more information?
YES--->Syntax error in Program SAPLY05BW_ISA
Details:
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Syntax error in program SAPLY05BW_ISA
What could be the problem?pl help me out!
Thanks

Hi,
Try this:
Execute the report RSFTP005 in BIW.
With rgds,
Anil Kumar Sharma .P

Error while executing BEx

hi !
I am getting the following error while executing the query .
Abort system error In program Cl_RSDM_READ_MASTER_DATA and form_sidval_direct_
Please suggest .

Do you have any replacment path variable defined in the query?
MASTER_DATA_READ is done either by end of the query execution (before the formating the result area) or while performing the value population for any formula / KF where replacement path is used.
- Danny

SAPLOGON_ID not found in saplogon.ini while executing BEx

Similar Messages

Maybe you are looking for