SAPMV45A got deleted. How to find when and by whom
Hi, In our IDES system, the program SAPMV45A was completly got deleted. How can we find when it was deleted. Is there any system log which can be read to find out the date of deletion? Or if any tables which store this kind of data?
Krishna
Hi,
generally it requires the access key to do that.Chk the table TSTC and TADIR FOR its existence or not.
regards,
Nagaraj
Similar Messages
-
How to find when and what date my iphone was first switched on from a retailer
how to find when and what date my iphone was first switched on from a retailer
Depending on the Code version you are running you can look for this output . It will show when a SFP was removed and inserted.
module-2# show port-config internal all (This command wil differ of earlier versions of SAN OS )
Mar 20 08:53:45 2011 00449361 fc2/20 --- DOWN Xcvr inserted
Mar 20 08:53:32 2011 00829429 fc2/20 --- DOWN Disable
Mar 20 08:53:32 2011 00826403 fc2/20 --- DOWN Disable
Mar 20 08:53:32 2011 00818936 fc2/20 --- DOWN Xcvr removed -
Frameworkpage is deleted. how to find it and restore it???????
Hi SDN,
This is extremely urgent!!!!!!!!!!!!!!
The frameworkpage has been deleted which was assigned to the administrator. Now when i try to login into the portal with the administrator ID and password, it is giving the follwoing error----
<b>
Error occurred while trying to access framework page: "pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage",The object does not exist or you are not authorized to access it.If this problem persists, contact your system administrator.
</b>
please help me out.... This is very urgent!!!!!!!!!!!
regards
Brahmachaitanya C. WajapeyIncase you don't have access to service.sap.com/notes then have a look at this. This is the content of SAP Note 869690
<b>Solution</b>
1. Logon to the Portal as an Administrator.
2. After receiving the error page, replace the URL with the following URL:
http://<Host Name>:<Host Port>/irj/servlet/prt/portal/prtroot/
pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fcom.sap.portal.frameworkpage.
Refresh the page.
This will display the framework page of the portal.
<b>If the default Desktop was deleted do the following to fix it:</b>
1. Navigate to: System Administration -> Portal Display ->
Desktops & Display Rules -> Portal Content -> Content Provided by SAP -> End User Content -> Standard Portal Users and Copy the Default Portal Desktop as delta link to
Portal Content -> Portal Users -> Standard Portal Users (pcd:portal_content/every_user/general/com.sap.portal.defaultDesktop).
2. In the main rule object (pcd:portal_content/administrator/super_admin/main_rules), change the rule to use: pcd:portal_content/every_user/general/com.sap.portal.defaultDesktop.
<b>If the specific User/Group does not have READ permissions do the following to fix it:</b>
1. Navigate to System Administration -> Portal Display -> Portal Content ->Portal Users -> Standard Portal Users -> Default Portal Desktop and open the permissions on the object. Check that the Group Everyone has 'Read' permissions on the object.
<b>If there is no Rule assigned to the User/Group do the following to fix it:</b>
1. Navigate to: System Administration -> Portal Display ->
Desktops & Display Rules, switch to the Search tab, select Rule collection In the Object Type box and click on the search.
2. Open the Master Rule Collection for Edit and check if there is a Rule set for the user or the group. If not, add new "IF Expression".
(You can refer to SAP help - Defining Portal Display Rules: http://help.sap.com/saphelp_nw04/helpdata/en/95/92b2f7d2f14a6da7a8b5d66808d1f6/frameset.htm).
Regards,
Sunil
PS: Reward points for helpful asnwers. -
I used to have 'sky at night' app but it got deleted in error, now when I try to download the app I get 'this app is incompatible with this phone' ' this app requires a gyroscope'...why ? whats changed ? how do I resolve the issue ? thanks CB
I used to have 'sky at night' app but it got deleted in error, now when I try to download the app I get 'this app is incompatible with this phone' ' this app requires a gyroscope'...why ? whats changed ? how do I resolve the issue ? thanks CB
-
How to find Latch and what actions need to be taken when there is a latch
Hi
Can you please tell me how to find Latch and what actions need to be taken when there is a latch?
Thanks
Regards,
RJ.1. What is a latch?
Latches are low level serialization mechanisms used to protect shared
data structures in the SGA. The implementation of latches is operating
system dependent, particularly in regard to whether a process will wait
for a latch and for how long.
A latch is a type of a lock that can be very quickly acquired and freed.
Latches are typically used to prevent more than one process from
executing the same piece of code at a given time. Associated with each
latch is a cleanup procedure that will be called if a process dies while
holding the latch. Latches have an associated level that is used to
prevent deadlocks. Once a process acquires a latch at a certain level it
cannot subsequently acquire a latch at a level that is equal to or less
than that level (unless it acquires it nowait).
2. Latches vs Enqueues
Enqueues are another type of locking mechanism used in Oracle.
An enqueue is a more sophisticated mechanism which permits several concurrent
processes to have varying degree of sharing of "known" resources. Any object
which can be concurrently used, can be protected with enqueues. A good example
is of locks on tables. We allow varying levels of sharing on tables e.g.
two processes can lock a table in share mode or in share update mode etc.
One difference is that the enqueue is obtained using an OS specific
locking mechanism. An enqueue allows the user to store a value in the lock,
i.e the mode in which we are requesting it. The OS lock manager keeps track
of the resources locked. If a process cannot be granted the lock because it
is incompatible with the mode requested and the lock is requested with wait,
the OS puts the requesting process on a wait queue which is serviced in FIFO.
Another difference between latches and enqueues is that
in latches there is no ordered queue of waiters like in enqueues. Latch
waiters may either use timers to wakeup and retry or spin (only in
multiprocessors). Since all waiters are concurrently retrying (depending on
the scheduler), anyone might get the latch and conceivably the first one to
try might be the last one to get.
3. When do we need to obtain a latch?
A process acquires a latch when working with a structure in the SGA
(System Global Area). It continues to hold the latch for the period
of time it works with the structure. The latch is dropped when the
process is finished with the structure. Each latch protects a different
set of data, identified by the name of the latch.
Oracle uses atomic instructions like "test and set" for operating on latches.
Processes waiting to execute a part of code for which a latch has
already been obtained by some other process will wait until the
latch is released. Examples are redo allocation latches, copy
latches, archive control latch etc. The basic idea is to block concurrent
access to shared data structures. Since the instructions to
set and free latches are atomic, the OS guarantees that only one process gets
it. Since it is only one instruction, it is quite fast. Latches are held
for short periods of time and provide a mechanism for cleanup in case
a holder dies abnormally while holding it. This cleaning is done using
the services of PMON.
4. Latches request modes?
Latches request can be made in two modes: "willing-to-wait" or "no wait". Normally,
latches will be requested in "willing-to-wait" mode. A request in "willing-to-wait" mode
will loop, wait, and request again until the latch is obtained. In "no wait" mode the process
request the latch. If one is not available, instead of waiting, another one is requested. Only
when all fail does the server process have to wait.
Examples of "willing-to-wait" latches are: shared pool and library cache latches
A example of "no wait" latches is the redo copy latch.
5. What causes latch contention?
If a required latch is busy, the process requesting it spins, tries again
and if still not available, spins again. The loop is repeated up to a maximum
number of times determined by the initialization parameter SPINCOUNT.
If after this entire loop, the latch is still not available, the process must yield
the CPU and go to sleep. Initially is sleeps for one centisecond. This time is
doubled in every subsequent sleep.
This causes a slowdown to occur and results in additional CPU usage,
until a latch is available. The CPU usage is a consequence of the
"spinning" of the process. "Spinning" means that the process continues to
look for the availability of the latch after certain intervals of time,
during which it sleeps.
6. How to identify contention for internal latches?
Relevant data dictionary views to query
V$LATCH
V$LATCHHOLDER
V$LATCHNAME
Each row in the V$LATCH table contains statistics for a different type
of latch. The columns of the table reflect activity for different types
of latch requests. The distinction between these types of requests is
whether the requesting process continues to request a latch if it
is unavailable:
willing-to-wait If the latch requested with a willing-to-wait
request is not available, the requesting process
waits a short time and requests the latch again.
The process continues waiting and requesting until
the latch is available.
no wait If the latch requested with an immediate request is
not available, the requesting process does not
wait, but continues processing.
V$LATCHNAME key information:
GETS Number of successful willing-to-wait requests for
a latch.
MISSES Number of times an initial willing-to-wait request
was unsuccessful.
SLEEPS Number of times a process waited a requested a latch
after an initial wiling-to-wait request.
IMMEDIATE_GETS Number of successful immediate requests for each latch.
IMMEDIATE_MISSES Number of unsuccessful immediate requests for each latch.
Calculating latch hit ratio
To get the Hit ratio for latches apply the following formula:
"willing-to-wait" Hit Ratio=(GETS-MISSES)/GETS
"no wait" Hit Ratio=(IMMEDIATE_GETS-IMMEDIATE_MISSES)/IMMEDIATE_GETS
This number should be close to 1. If not, tune according to the latch name
7. Useful SQL scripts to get latch information
** Display System-wide latch statistics.
column name format A32 truncate heading "LATCH NAME"
column pid heading "HOLDER PID"
select c.name,a.addr,a.gets,a.misses,a.sleeps,
a.immediate_gets,a.immediate_misses,b.pid
from v$latch a, v$latchholder b, v$latchname c
where a.addr = b.laddr(+)
and a.latch# = c.latch#
order by a.latch#;
** Given a latch address, find out the latch name.
column name format a64 heading 'Name'
select a.name from v$latchname a, v$latch b
where b.addr = '&addr'
and b.latch#=a.latch#;
** Display latch statistics by latch name.
column name format a32 heading 'LATCH NAME'
column pid heading 'HOLDER PID'
select c.name,a.addr,a.gets,a.misses,a.sleeps,
a.immediate_gets,a.immediate_misses,b.pid
from v$latch a, v$latchholder b, v$latchname c
where a.addr = b.laddr(+) and a.latch# = c.latch#
and c.name like '&latch_name%' order by a.latch#;
8. List of all the latches
Oracle versions might differ in the latch# assigned to the existing latches.
The following query will help you to identify all latches and the number assigned.
column name format a40 heading 'LATCH NAME'
select latch#, name from v$latchname; -
Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.
You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Hello I wonder if anyone knows how to find, download and install a suitable IPA (phonetics) font for the MacBook Air? I need to be able to use a pop up window of fonts.
Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.
-
HOW TO FIND WF_ITEM_TYPE AND WF_ITEM_KEY FOR PO
제품 : MFG_PO
작성날짜 : 2003-05-14
HOW TO FIND WF_ITEM_TYPE AND WF_ITEM_KEY FOR PO
===============================================
PURPOSE
This solution is for Oracle Purchasing 11 and higher
Explanation
1. Start a SQL*Plus session using the APPS schema.
2. Run the following script and enter the Purchase Order number that is stuck
in process when prompted for the PO_NUMBER:
SELECT WF_ITEM_TYPE, SUBSTR(WF_ITEM_KEY,1,25) "WF_ITEM_KEY"
FROM PO_HEADERS_ALL
WHERE AUTHORIZATION_STATUS='IN PROCESS'
AND SEGMENT1='&PO_NUMBER';
3. If more than one row is returned, then run the following script and only
refer to the row that contains the OPERATING_UNIT_NAME that equals the
operating unit name tied to the responsibility used when the Purchase Order was
discovered as being stuck in process.
SELECT SUBSTR(WF_ITEM_TYPE,1,12) "WF_ITEM_TYPE",
SUBSTR(WF_ITEM_KEY,1,15) "WF_ITEM_KEY",
SUBSTR(NAME,1,35) "OPERATING_UNIT_NAME"
FROM PO_HEADERS_ALL PA, HR_ORGANIZATION_UNITS OU
WHERE PA.ORG_ID=OU.ORGANIZATION_ID
AND AUTHORIZATION_STATUS='IN PROCESS'
AND SEGMENT1='&PO_NUMBER';
Example
Reference Documents
-------------------Hi Kishore,
Welcome to SCN!
to find the sales order from Purchase order , go to SE16, Enter the table name as VBAK and press Enter.
In BSTNK field of VBAK, Enter the Purchase order number. System will return you corresponding sales order.
Hope this will help you.
Regards,
Nikhil -
Cookies got deleted, how do I enable them again?
cookies got deleted, how do I enable them again?
In general, deleting web cookies is not a recoverable operation. They're gone.
Most web sites will recreate cookes as and if needed. Often after logging into the web site.
If this is a result of a web site error message or web site requirements, what are the requirements are the error message(s) you are encountering? (It's possible to disable cookies entirely via a particular web browser's preferences settings, for instance, and some web sites require cookies for logins and related operations. And for tracking users.) -
How to find when index was created in the database.
Hi,
Please help me, how to find when index was created in the database. It should give with date and time.
Thanks... BakserPlease help me, how to find when index was created in the database. It should give with date and time.DBA_/ALL/User_objects Created
Name Null? Type
OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(128)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_ID NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED DATE
LAST_DDL_TIME DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)
select OBJECT_NAME,TIMESTAMP,CREATED from ALL_OBJECTS where OWNER='OWNERNAME' AND OBJECT_NAME='OBJECT_NAME' AND OBJECT_TYPE='INDEX';Edited by: Anantha on Apr 21, 2009 3:18 PM
Edited by: Anantha on Apr 21, 2009 3:19 PM -
How to find classtype and class for a material.
Hi,
How to find classtype and class for a material.
which table contains this data.
Thanks
KiranHi Kiran,
Check below sample code. Use this BAPI which will give all info about the class for the material.
DATA: l_objectkey_imp TYPE bapi1003_key-object
VALUE IS INITIAL.
CONSTANTS: lc_objecttable_imp TYPE bapi1003_key-objecttable
VALUE 'MARA',
lc_classtype_imp TYPE bapi1003_key-classtype
VALUE '001',
lc_freight_class TYPE bapi1003_alloc_list-classnum
VALUE 'FREIGHT_CLASS',
lc_e TYPE bapiret2-type VALUE 'E',
lc_p(1) TYPE c VALUE 'P',
lc_m(1) TYPE c VALUE 'M'.
SORT i_deliverydata BY vbeln posnr matnr.
CLEAR wa_deliverydata.
LOOP AT i_deliverydata INTO wa_deliverydata.
REFRESH: i_alloclist[],
i_return[].
CLEAR: l_objectkey_imp.
l_objectkey_imp = wa_deliverydata-matnr.
*Get classes and characteristics
CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
EXPORTING
objectkey_imp = l_objectkey_imp
objecttable_imp = lc_objecttable_imp
classtype_imp = lc_classtype_imp
* READ_VALUATIONS =
keydate = sy-datum
language = sy-langu
TABLES
alloclist = i_alloclist
* ALLOCVALUESCHAR =
* ALLOCVALUESCURR =
* ALLOCVALUESNUM =
return = i_return
Thanks,
Vinod. -
I rented four movies on my mac and then transfered them to my iPad, i then did an update to my iPad, now the rentals are not on my ipad nor my mac. I did not watch them and I was charged for them. How do find them and transfer back on my iPad
If you moved them to your iPad then they will have been removed from your Mac. If they are no longer in the iPad's Videos app following the update then you will need to try contacting iTunes support and see if they will let you re-download them : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
How to find list and cost price in MM module
Hi
Can any one help me in how to find List and cost price in MM module for pricing.
thank you.
Davidhi Saquib Khan
Many thanks Saquib Khan for ur reply. Actually iam trying to create a report which displays material number, material description, plant, product hierarchy, cost and list price, based on the selection criteria of a range of materials, plant and also product hierarchy.
If u want to share any information.It would be much better for me.Like iam learning SAP.
thanks. -
How to find files and subdirectories in a directory
can anyone tell me how to find files and subdirectories in a directory .
Here's a code snippet,
http://javaalmanac.com/egs/java.io/TraverseTree.html -
so someone took my ipod 4g and who ever took it turned it off and i dont know how to find it and i really want it back, what should i do?
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
Maybe you are looking for
-
can you assign a task to a position? trying to find out if you can conduct a search where an employee's qualification matches a task requirement of a position. also, how would this be done, via PPOME? Message was edited by: andrew chan
-
Problem in displaying exe file
For my project, I need to display the text and picture contents stored in the database based on date(daywise). Afterwards I need to display an exe file and this cycle has to repeat. I'm able to display the first portion and the second portion(exe exe
-
Need to delete the record based on the checkbox xselected
I am displaying the data from tables vbrk and vbrp.along with that data i am displaying the checkbox also. here my requirement is when ever the user checks the checkboxes and click on delete button the checkbox selected items should deleted and
-
Hi, I have created a report with the following attributes: Region Definition User Interface - Hide and Show Region; Report template -Standard; Sort Columns - all checked. Report source - SQL Query (PL/SQL Function Body returning SQL query). I open a
-
HT1338 Why did my photos disappear when the upgrade was installed?
why did my photos disppear when i updated Iphoto?