SAP Netweaver 7.01 ABAP Trial Version 的 License 问题

大家好，我由于换了电脑，将原来的操作系统重新封装后，克隆到新电脑。ABAP Trial 的服务可以运行，但GUI登陆是提示授权检查错误，使用新的Active Hardware Key 申请的License文件后在导入时发现，License 文件中的 System Number 与原来的  System Number 不同。
请问有解决的方案吗？

试过几种方法破解,
1.追踪表没有发现存储hardware key的信息,没有成功。
2.查代码查到
    call 'GET_ACCESS_INFO'
      id 'CODE' field opcode
      id 'TYP' field slictyp
      id 'HWID' field hwkey
      id 'INSTNR' field instnr
      id 'SYSID' field systemid
      id 'EXPDATE' field datum
      id 'LKEY' field lkey.
无处下手,失败.
3. 强制修改登陆程序,导致登陆界面的PBO报错,系统登陆都无法显示,失败中的失败.
我在花费了大量精力,依然失败后,毅然决然的放弃破解的打算了。
重新装系统,重新装minisap,重新申请License,一切都顺利 。

Similar Messages

  • SAP NetWeaver 7.0 ABAP Trial Version Installation Step

    Dear sirs
    I have download the SAP NetWeaver 7.0 ABAP Trial Version both 2 rar files 2.47 GB.Now i want install.on my pc XP SP2 is runing and 24 GB free Disk Space on D Drive.
    so plz gudie me how to install the SAP NetWeaver 7.0 ABAP Trial Version & license Key & Gui Settings
    Thanks & Regards
    Subhash Nimbalkar

    Hello,
    You must extract the first archive (only the first archive)
    After that you'll see that you have in the directory start.htm
    Double clicking 'start.htm' will take you to a web page where you find all the steps for installation.
    Good luck.

  • SAP NetWeaver 7.01 ABAP Trial Version - NSP License Key Expired

    Hello,
    I successfully installed SAP NetWeaver 7.01 ABAP Trial Version in July 2009.  I kept my 90 day NSP license key up to date until May 2010.  I already applied and received a new NSP license key.  Unfortunately, I am unable to sign on to SAP using id's SAP*, DDIC, or BCUSER to upload the new license using transaction code SLICENSE.  I also can not locate file SAPLICENSE.EXE on my harddrive to update the license using DOS. 
    Can anybody give me any suggestions on how to update the NSP license key so I can start using the trial version on my computer again?
    Thank you very much.
    Rae Ellen Woytowiez

    Hello Arun,
    Thanks for the advice to adjust the system date.  I will give you some points.
    I just read from another post from Rich Heilman as follows:
         "Please try to set your system date back to a date when the previous license had not expired. You may need to reboot here.  Start the engine. Try to logon. Install new license. Log off. Change system date back. Restart engine.  Please try this, I've heard that it works. If it does, please tell us."
    Well when I set my system date back to before license expired, I was able to logon onto NSP and update it with a new license number.
    Kind Regards,
    Rae Ellen Woytowiez

  • License for sap netweaver 7.0 abap trial version not availble on given link

    Hi ALL,
    I install sap netweaver 7.0 abap trial version almost three or four times and every time when i try to obtain a 90 days license for that by the link given in the installation guide, the sap system only shows only two options MBS for windows and CST (something like that) for linux.
    But my problem is that abap trial version is working on NSP system. it did'nt take the license obtain by MBS.
    Please suggest me what to do next or provide solution for my problem.
    Regards,
    Bhuvnesh

    Hello. Read this /thread/948887 [original link is broken]
    Regards.

  • New User - SAP NetWeaver 7.0 - ABAP Trial Version

    Our company as developed software link from our application to the SAP Plant Maintenance (PM) module. 
    To simply the discussion, please assume that the link only creates a PM Notification.  Currently this is done via RFC to IQS4_CREATE_NOTIFICATION.
    One of our biggest challenges in developing the link for our Oil Refinery customers is the fact that we do not run SAP in our development office.  This makes it very difficult to maintain the link because we need to rely on our customer’s systems to test any changes we make.
    In the past, we have made several attempts to purchase a developer license to SAP but could not determine the correct sales avenue.  We ended up talking to sales people who told us that we needed to spend $50,000.
    Recently, I have installed SAP NetWeaver 7.0 - ABAP Trial Version.  I have it running and can log into the SAP GUI and I can make remote function calls to the Airport demo that is installed with it.  This environment appears to have everything that I need to develop our link but I can not figure out how to install the PM module.  I am not sure if this is even possible.
    So here are my questions:
    1) Can the PM module be activated/installed in the SAP NetWeaver 7.0 - ABAP Trial Version?
    2) Would this be included if we purchase the SAP NetWeaver, Development Subscription for $2,300/year.

    1. No
    2. yes it has everything

  • Error while installing SAP NetWeaver 7.01 ABAP Trial Version

    Hi Experts,
    While installing the SAP NetWeaver 7.01 ABAP Trial Version on my pc (Vista) getting the below error.
    (Sep 26, 2010 10:30:07 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:07 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:30:17 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:17 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:30:27 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:27 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:30:38 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:38 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:30:48 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:48 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:30:58 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Sep 26, 2010 10:30:58 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Sep 26, 2010 10:31:08 AM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed.  Look at the log file D:\SAP\NSP\log.txt for details.
    (Sep 26, 2010 10:31:08 AM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
    STACK_TRACE: 12
    ProductException: (error code = 601; message="Services failed to start (see the log for details)")
         at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Sep 26, 2010 10:31:09 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file D:\SAP\NSP\log.txt for details.
    (Sep 26, 2010 10:31:09 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Please suggest.
    Thanks
    Neeraj

    > While installing the SAP NetWeaver 7.01 ABAP Trial Version on my pc (Vista) getting the below error.
    >
    > (Sep 26, 2010 10:30:07 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    <snip>
    > ProductException: (error code = 601; message="Services failed to start (see the log for details)")
    <snip>
    I suggest you look at the log, the error you posted doesn't reveal much more than the fact a service didn't start which is needed by the installation process. Why it didn't start is not in this message.

  • Error installing SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista

    This is my second attempt to install. The first time the laptop froze during the MaxDB installation. I was not able to use uninstall.exe (did not exist), so I deleted the entire contents of the sapdb folder and also ran the registry clean tool, RegistryClean.cmd, before the second attempt. Any assistance would be appreciated!!  Here is the contents of log.txt:
    (Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file C:\sapdb\log.txt for details.
    (Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    Faisal,
    Thanks for your response to my question.  I have successfully installed VirtualDisk, however I CANCELED the "Create New Virtual Disk" setup at step 8 of your instructions because it states that you must select a size of more than 50GB.  After installing VirtualDisk I only have 38GB of free space on my hard drive.  System requirements for SAP NetWeaver 7.01 ABAP Trial Version states 25GB temporary for installation - 12GB permanent. Your instructions specify that an additional 3.5GB are needed for setup files bringing the total space to 28.5GB.  Why are more than 50GB required?
    If more than 50GB are required, then what are my options? (I have already removed unneeded software, files, etc., so I can't get more space on my existing hard drive.)
    Thanks for your help!
    Gary

  • How to uninstall SAP NetWeaver 7.01 ABAP Trial Version on Vista

    I can't  uninstall SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista, because installation didn't finish

    Hello
    Open the Start.html file in the SAP folders you have downloaded. You can see Uninstall instructions on right hand side and then go to c: drive and delete all the SAP folders you see and then in registry  . It is good to follow those steps to uninstall bcoz even u uninstall there will be some traces in you system
    Regards
    Anil

  • SAP Netweaver 7.01  ABAP Trial version

    Hi Gurus,
    I have installed the SAP Netweaver 7.01 ABAP trial version from SDN. I changed the settings of the Workbench Browser selection in SE80 to had checked the enhancement info system and all other checkbox.
    se80  Utilities->Settings
    I got a error saying only 8 can be selected. But by mistake i clicked on the enter and now it goes to dump.
    now whenever I execute SE 80 i get the following dump
    Error analysis                                                                       
        An exception occurred that is explained in detail below.                         
        The exception, which is assigned to class 'CX_SY_CREATE_OBJECT_ERROR', was not   
         caught in                                                                       
        procedure "IF_WB_LAYOUT_MANAGER~GET_NEW_WINDOW_STYLE" "(METHOD)", nor was it     
         propagated by a RAISING clause.                                                 
        Since the caller of the procedure could not have anticipated that the            
        exception would occur, the current program is terminated.                        
        The reason for the exception is:                                                 
        The dynamically specified class "CL_AMO_REPOSITORY" at CREATE OBJECT neither     
         exists as                                                                       
        local, nor as global class in the system, or is overshadowed by a local          
        data type of the same name.                                                      
    How can I revert back to the original settings for SE80? I cannot change the settings since when i give the SE80 transaction it goes to dump.
    Any help in this regard is highly appreciated.
    Thanks,
    Nilesh

    Hi,
    For Trial versions, the correct forum for this question would be
    Software Downloads
    @Moderators, please move to the "Trials, Previews & Other Downloads" forum if appropriate.
    Regards,
    Debasis.

  • SAP NetWeaver 7.01 ABAP Trial Version - You can only work in client 001

    Hi BI Experts,
    I have installed SAP NetWeaver 7.01 ABAP Trial Version and I could successfully login into the system.
    When I run RSA1 Tcode I am getting error message You can only work in client 001. Can some please advice.
    I appreciate all your input.
    Regards,
    OSR.

    Hi,
    Since BI tables are cross-client, BI can work only in one client. By default BI is configured for client 001.
    If you want it in different client, you change it in BWMANDT field of RSADMINA table.
    hope it helps.
    Regards,
    Pruthvi R

  • SAP Netweaver 7.01 ABAP Trial Version not working

    Hello,
    I am trying to load SAP Netweaver 7.01 ABAP Trial Version on VISTA.  I am having two problems.
    1.  When I try to start NSP using SAP Management Console, I am prompted with a pop-up window labeled "WebService Authentication."  The first parameter for User is automatically filled with value Home-PC\RESkater.  It also asks me to enter Password.  I do not know what to enter for password.
    2.  After I installed the SAP Netweaver 7.01 ABAP Trial Version, the download instructions says that I can sign on to system via web gui using  http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000.  However, I receive the error message stating "local host is not set up to establish a connection on port 8000 with this computer."
    Can anybody give me any helpful tips that might resolve these issues for me?
    Thanks.
    Rae Ellen Woytowiez
    Edited by: Rae Ellen Woytowiez on Jul 5, 2009 6:35 AM
    Edited by: Rae Ellen Woytowiez on Jul 5, 2009 6:36 AM

    Hi Rae,
    Regarding issue 1, you to startup NSP, you need to remove the Home-PC\ portion of the username.  So your username should only be RESkater.  Then the password should be the same as the password that you use to logon onto the operating system for user RESkater.
    Hope this helps...
    Thanks,
    Miguel

  • Error after Install SAP NetWeaver 7.01 ABAP Trial Version

    Hi Everyone,
    I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
    It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
    Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
    Error! Connection failed to node (local) for database NSP:
    -24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
    -24832,ERR_SHMNOTAVAILABLE: Shared memory not available
    -24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
    Someone could help me?

    Hello Marques Polastri ,
    ->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to  C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
    Try to connect to the database NSP & let us know the results.
    -> Please update with output of the following commands:
           dbmcli db_enum
           dbmcli -d NSP -u <control>,<pwd> db_state
    Thank you and best regards, Natalia Khlopina

  • 64 bits/ installation of SAP NetWeaver 7.01 ABAP Trial Version on vista

    Hello All,
    I'm trying to install SAP NetWeaver 7.01 ABAP Trial Version on a 64 bits computer with windows vista. When I'm launching sapmmcX86u.msi  to install the SAP Management Console, I have the following error : " the installation does not support 64 Bits Windows Operating systems. Please use the corresponding 64 bit installation package "
    does this package exist ?
    Thanks for your answers

    Hello All,
    I'm trying to install SAP NetWeaver 7.01 ABAP Trial Version on a 64 bits computer with windows vista. When I'm launching sapmmcX86u.msi  to install the SAP Management Console, I have the following error : " the installation does not support 64 Bits Windows Operating systems. Please use the corresponding 64 bit installation package "
    does this package exist ?
    Thanks for your answers

  • Error Install : SAP NetWeaver 7.01 ABAP Trial Version

    Hi Everyone,
    I am getting this error while trying to install SAP Netweaver 7.01 ABAP Trial version.
    (Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file C:\sapdb\NSP\log.txt for details.
    (Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    *     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)*
    *     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)*
    *     at java.lang.reflect.Method.invoke(Unknown Source)*
    *     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)*
    *     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)*
    *     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)*
    *     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)*
    *     at java.lang.Thread.run(Unknown Source)*
    Can somebody give me suggestion how to resolve my probelm.
    thanks,
    Amir
    PS : I have all the requirements system

    did u installed loopback adapter as mentioned in the installation instructions?
    Yes, yesterday, I tried to install SAP with loopback adapter (Now, I am trying to install without loopback adapter because I have a DHCP server) -> the same error with or without loopback adapter
    does your pc have internet connection available?
    Yes, I have an internet connection available (I am in Hotel and there is Internet via DHCP server)
    is the installation process completed?
    Yes the installation process is completed and with success (but without C:\sapdb)
    (Yesterday, when I had the first error and the installation process was not completed, I had the C:\sapdb.....strange)
    how much time the installation taking.. usually the step of database installation and configuration takes a long time.
    Not much time because there is not database installation
    while logon to sap, what details are u giving.. the system number .. is it 00,
    When I create the Item, I put the system number 00 but when I try to logon I have the error message that I posted in my previous message
    which other SAP softwares are installed on ur pc.
    In each time, when I tried to install SAP, I uninstalled all SAP software
    I hope you can help me for the install
    Note : I work on Vista sp1
    Thank you for your help
    Amir

  • Error:SAP NetWeaver 7.01 ABAP Trial Version

    Hi,
    While installing SAP NetWeaver 7.01 ABAP Trial Version I am getting following error in the logfile generated.
    Kindly help if someone has encountered the same and has been able to rectify it. Looking for your immediate response.
    Regards,
    Ratna.
    (Nov 3, 2008 8:45:03 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$DiskSpaceCheck, wrn, WARNING: C:\ partition has insufficient space to install the items selected.   2972.3 MB additional space would be needed to install the selected items.
    (Nov 3, 2008 10:09:03 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Nov 3, 2008 10:09:03 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Nov 3, 2008 10:09:04 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Nov 3, 2008 10:09:04 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    Hi ,
    I encountered the same Java problem, the problem occurs if your system contains JAVA components already installed. Try to remove them using add remove program from control panel and reinstall SAP.
    Regards,
    Manisha

Maybe you are looking for