SAPNWABAP701SR1_TRIAL installation - Phase 18 Import ABAP never ends
Hi all!
I already checked this discussion in the forum but it doesn't seem to be a only-way resolution.
I am trying to install SAPNWABAP701SR1_TRIAL and the computer spent the hole night just at the 18th phase (Import ABAP). At the status bar says: "Import monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28".
At my first try i thought it was the RAM size or the virtual memoty but now they are 1.6GB and 4GB respectivelly.
For what i read i list possible problems:
- JRE version is 1.4.2_11
- JDK is not installed, just the JRE
- enviroment variables are not set
- loopback interface's ip address is 192.168.1.7 (and not 10.10.10.1) as my local network is 192.168.1.0
the host file is like that:
192.168.1.7 myHostName
please can anyone can tell me if this items might be the reason why i can't complete the installation?
Thank you a lot!.
Edited by: Fabio Luiz Esperati Pagoti on Jun 12, 2009 2:38 PM
Hi Fabio,
I too had the same problem. During my first run, I waited for 2-3 hrs and since there was no progress, I ended the installation. After much trouble, I started again and this time, when the installation was (seemingly) stuck at this step, I thought of checking the logs and I saw that infact processing was happening in the background. For me it took 7 hours 30 minutes for this to be completed. So be patient and the installation will proceed.
When this step is running, you can see the status using the log file: C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\import_monitor.log. There you will find lines like:
Loading of 'DOKCLU' import package is started.
Loading of 'SAPSSEXC_1' import package is started.
and so on......
In the same folder you will see log files with these names (DOKCLU, SAPSSEXC_1, etc). If you continuously review them, you can see the progress.
Regards
Ranjith
Similar Messages
-
Installation error phase "import ABAP" - ERP2005 IDES - mssql2005
Hi.
I've problems installing <b>ERP2005 IDES</b> with <b>microsoft sql server 2005</b> at <b>windows 2003server x64</b>.
I've installed solution manager 4.0 succesfylly at the same host.
I've read about simular problems at this forum (with oracle). But no solutions for me.
Error in phase "Import ABAP":
CJS-30022 Program 'Migration Monitor' exits with error code 103.
For details see log file(s) import_monitor.java.log, import_monitor.log
IMPORT_MONITOR.LOG:
ERROR: 2007-10-05 17:29:12 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
SAPSDIC.LOG:
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: F4UHLP~1 created
In SAPSDIC.tsk I find one error:
D F4UHLP I err
I want to install nonunicode, but I've tried to install unicode with the same result.
I've also recieving this error in a log-file:
<b>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline</b>I understand that I manually can set the parameter SAPSYSTEMNAME in control.xml, but I've dont know where and if this is a good solution?
This is what i've been trying without success:
-Uninstalled the instance and deleted inst_dir/erp.
-Environment variable is set like inst_guide describes
-Paging Files is ok
-Access to table F4UHLP is ok
Can anybody help me? Please? I'm desperate.
Kindly regards
Harald Vedvik
Message was edited by:
Harald Vedvik
Message was edited by:
Harald VedvikHi again.
I posted my logs in the beginning of this thread, but if you want a more detailed
b]sapinst.log</b>:
<i>WARNING 2007-10-08 13:00:48
Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
INFO 2007-10-08 13:00:49
Execute step doGrantServiceRights of component |NW_Onehost|ind|ind|ind|ind|00|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|2.
INFO 2007-10-08 13:01:27
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs E:\ERP2005IDES\Export\51032413_1\EXP1;E:\ERP2005IDES\Export\51032413_2\EXP2;E:\ERP2005IDES\Export\51032413_3\EXP3;E:\ERP2005IDES\Export\51032413_4\EXP4;E:\ERP2005IDES\Export\51032413_5\EXP5;E:\ERP2005IDES\Export\51032413_6\EXP6;E:\ERP2005IDES\Export\51032413_6\EXP7;E:\ERP2005IDES\Export\51032413_6\EXP8;E:\ERP2005IDES\Export\51032413_6\EXP9;E:\ERP2005IDES\Export\51032413_6\EXP10;E:\ERP2005IDES\Export\51032413_6\EXP11 -installDir D:\sapinst_instdir -orderBy "" -r3loadExe E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -tskFiles yes -extFiles no -dbCodepage 1100 -jobNum 3 -monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2007-10-08 13:17:59
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs E:\ERP2005IDES\Export\51032413_1\EXP1;E:\ERP2005IDES\Export\51032413_2\EXP2;E:\ERP2005IDES\Export\51032413_3\EXP3;E:\ERP2005IDES\Export\51032413_4\EXP4;E:\ERP2005IDES\Export\51032413_5\EXP5;E:\ERP2005IDES\Export\51032413_6\EXP6;E:\ERP2005IDES\Export\51032413_6\EXP7;E:\ERP2005IDES\Export\51032413_6\EXP8;E:\ERP2005IDES\Export\51032413_6\EXP9;E:\ERP2005IDES\Export\51032413_6\EXP10;E:\ERP2005IDES\Export\51032413_6\EXP11 -installDir D:\sapinst_instdir -orderBy "" -r3loadExe E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -tskFiles yes -extFiles no -dbCodepage 1100 -jobNum 3 -monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_15-b02)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_15-b02, mixed mode)
Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
ERROR 2007-10-08 13:17:59
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-10-08 13:17:59
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .</i>
<b>import_monitor.log:</b><i>INFO: 2007-10-08 13:01:29
Import Monitor is started.
CONFIG: 2007-10-08 13:01:29
Application options:
dbCodepage=1100
dbType=MSS
extFiles=no
importDirs=E:\ERP2005IDES\Export\51032413_1\EXP1;E:\ERP2005IDES\Export\51032413_2\EXP2;E:\ERP2005IDES\Export\51032413_3\EXP3;E:\ERP2005IDES\Export\51032413_4\EXP4;E:\ERP2005IDES\Export\51032413_5\EXP5;E:\ERP2005IDES\Export\51032413_6\EXP6;E:\ERP2005IDES\Export\51032413_6\EXP7;E:\ERP2005IDES\Export\51032413_6\EXP8;E:\ERP2005IDES\Export\51032413_6\EXP9;E:\ERP2005IDES\Export\51032413_6\EXP10;E:\ERP2005IDES\Export\51032413_6\EXP11
installDir=D:\sapinst_instdir
jobNum=3
loadArgs= -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-10-08 13:01:29
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-10-08 13:01:29
List of packages with views: 'SAPVIEW'.
TRACE: 2007-10-08 13:01:29 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'D:\sapinst_instdir\DDLMSS.TPL' template file is started.
INFO: 2007-10-08 13:01:29 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'D:\sapinst_instdir\DDLMSS.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2007-10-08 13:01:29
Data codepage 4103 is determined using TOC file 'E:\ERP2005IDES\Export\51032413_1\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
INFO: 2007-10-08 13:01:32
Version table 'SVERS' is found in STR file 'E:\ERP2005IDES\Export\51032413_4\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2007-10-08 13:01:32
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\ERP2005IDES\Export\51032413_4\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2007-10-08 13:01:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-10-08 13:01:33 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -ctf I E:\ERP2005IDES\Export\51032413_4\EXP4\DATA\SAPSDIC.STR D:\sapinst_instdir\DDLMSS.TPL SAPSDIC.TSK MSS -l SAPSDIC.log
TRACE: 2007-10-08 13:01:33 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast
ERROR: 2007-10-08 13:17:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-10-08 13:17:59
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-10-08 13:17:59
1 error(s) during processing of packages.
INFO: 2007-10-08 13:17:59
Import Monitor is stopped.</i>
Do you need more than alredy posted for sapsdic.log?
SAPSDIC.LOG:
<i>(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: F4UHLP~1 created</i>
I dont know if you recive my points? I've been giving you points:)
best regards
Harald -
SAP IDES Installation u2013 Import ABAP Phase taking too long issue
Hello,
I have been trying to install IDES ECC 6.0 on a dektop with 3.2GB RAM and intel pentiumD, I have tried thrices and whenever it reaches IMPORT ABAP phase it takes so long that I often have to cancel and restart.
THe current installation has taken more than 20 hours and I am still on that phase, the status message for over 24hrs is as follows:
u201Cphase is in progressu201D
u201CImport monitor jobs: running 3, waiting 16, completed 0, failed 0, total 19
My database is MS SQL Server 2005.Hi,
Welcome you post on the forum. However, this particular forum is for SAP Business One System Administration. It is not related to ECC.
Please find a proper forum to post.
Thanks,
Gordon -
Phase import abap (problem in the import of the export)
Hello!:
We are doing the IMPORT of the EXPORT (for the CU&UC), and has appears the next error in the IMPORT ABAP PHASE:
(GSI) INFO: vname = "MSSQL "
(GSI) INFO: hostname = "IBA3SAP\MIG "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "IBA3SAP"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x IA64 Level 31 (Mod 1 Step 5)"
(DB) INFO: ACCTIT created
(DB) INFO: ACCTIT~0 created
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: ACCTIT~1 created
(DB) INFO: disconnected from DB
M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe: job finished with 1 error(s)
M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe: END OF LOG: 20080409193447
Can you help me?
Thanks and regards,
Alfredo.IMPORT_MONITOR.LOG
ERROR: 2008-04-09 19:34:48 com.sap.inst.migmon.LoadTask run
Loading of 'ACCTIT' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i ACCTIT.cmd -dbcodepage 4103 -l ACCTIT.log -loadprocedure fast' exited with return code 2.
For mode details see 'ACCTIT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-09 19:53:03 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1_34' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL1_34.cmd -dbcodepage 4103 -l SAPAPPL1_34.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL1_34.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-09 22:08:11 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1_67' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL1_67.cmd -dbcodepage 4103 -l SAPAPPL1_67.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL1_67.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2008-04-10 08:22:35 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0_17' import package is interrupted with R3load error.
Process 'M:\usr\sap\MIG\SYS\exe\uc\NTIA64\R3load.exe -i SAPAPPL0_17.cmd -dbcodepage 4103 -l SAPAPPL0_17.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL0_17.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline -
Error in Phase Import ABAP by Installation of Solution Manager 4.0
Hello,
i have started Installation of Solution Manager 4.0 (Win,MaxDb).An Error occurred during phase Abap Import. From 18 Jobs only 13 was completed, 5 failed. After retry next 3 jobs was completed, but the last 2 will not completed (i have tried 3 times).
Messages from logs:
import_monitor.log
TRACE: 2007-06-09 15:40:49 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is started.
TRACE: 2007-06-09 15:40:49 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0' import package into database:
D:\usr\sap\SM2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -nolog -c 0
ERROR: 2007-06-09 19:04:59 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is interrupted with R3load error.
Process 'D:\usr\sap\SM2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPAPPL0.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
SAPAPPL0.log
(IMP) INFO: import of LISCOMDES completed (0 rows) #20070608172145
(RDI) ERROR: missing attribute description for table "LISDOMAIN" in DB independent control file "E:\install_dvd\export\EXP3\DATA\SAPAPPL0.STR"
(DB) ERROR: DDL statement failed
(ALTER TABLE "LISDOMAIN" ALTER PRIMARY KEY ( "DOMNAM", "STATE" ) )
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(IMP) ERROR: LOCK TABLE failed for table LISDOMAIN
(RDI) ERROR: missing attribute description for table "LISDOMAIN" in DB independent control file "E:\install_dvd\export\EXP3\DATA\SAPAPPL0.STR"
Have anybody any ideas or sugestions?
Regards
Bogdan RokosaHello,
problem solved. After installation stop and system restart, phase ran without errors.
Regards
Bogdan Rokosa -
SAPinst error at phase import abap
Hi All,
We've just recently uninstall SAP ERP from QAS server due to crash and started to install SAP again on the server. I've encounter error on abap import (Phase 24/64) on installation. SAPinst.log shows below error;-
WARNING 2011-02-28 14:06:03.149
Execution of the command "/usr/jdk/j2sdk1.4.2_20/bin/java -classpath migmon.jar -showversion -Xmx1024m -d64 com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_20-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_20-rev-b04)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_20-rev-b04, mixed mode)
Import Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
Loading of 'SAPNTAB' import package: OK
Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.
Import Monitor jobs: running 4, waiting 23, completed 1, failed 0, total 28.
Import Monitor jobs: running 5, waiting 22, completed 1, failed 0, total 28.
Import Monitor jobs: running 6, waiting 21, completed 1, failed 0, total 28.
Import Monitor jobs: running 7, waiting 20, completed 1, failed 0, total 28.
Import Monitor jobs: running 8, waiting 19, completed 1, failed 0, total 28.
Import Monitor jobs: running 9, waiting 18, completed 1, failed 0, total 28.
Import Monitor jobs: running 10, waiting 17, completed 1, failed 0, total 28.
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 9, waiting 17, completed 1, failed 1, total 28.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 8, waiting 17, completed 1, failed 2, total 28.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 7, waiting 17, completed 1, failed 3, total 28.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 6, waiting 17, completed 1, failed 4, total 28.
Import Monitor jobs: running 7, waiting 16, completed 1, failed 4, total 28.
Import Monitor jobs: running 8, waiting 15, completed 1, failed 4, total 28.
Import Monitor jobs: running 9, waiting 14, completed 1, failed 4, total 28.
Import Monitor jobs: running 10, waiting 13, completed 1, failed 4, total 28.
Loading of 'FUPARAREF' import package: ERROR
Import Monitor jobs: running 9, waiting 13, completed 1, failed 5, total 28.
Loading of 'TODIR' import package: ERROR
Import Monitor jobs: running 8, waiting 13, completed 1, failed 6, total 28.
Loading of 'E071K' import package: ERROR
Import Monitor jobs: running 7, waiting 13, completed 1, failed 7, total 28.
Loading of 'SCPRVALS' import package: ERROR
Import Monitor jobs: running 6, waiting 13, completed 1, failed 8, total 28.
Import Monitor jobs: running 7, waiting 12, completed 1, failed 8, total 28.
Import Monitor jobs: running 8, waiting 11, completed 1, failed 8, total 28.
Import Monitor jobs: running 9, waiting 10, completed 1, failed 8, total 28.
Import Monitor jobs: running 10, waiting 9, completed 1, failed 8, total 28.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 9, waiting 9, completed 1, failed 9, total 28.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 8, waiting 9, completed 1, failed 10, total 28.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 7, waiting 9, completed 1, failed 11, total 28.
Import Monitor jobs: running 8, waiting 8, completed 1, failed 11, total 28.
Import Monitor jobs: running 9, waiting 7, completed 1, failed 11, total 28.
Import Monitor jobs: running 10, waiting 6, completed 1, failed 11, total 28.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 9, waiting 6, completed 1, failed 12, total 28.
Import Monitor jobs: running 10, waiting 5, completed 1, failed 12, total 28.
Loading of 'SAPDDIM' import package: ERROR
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 7, waiting 5, completed 1, failed 15, total 28.
Import Monitor jobs: running 7, waiting 5, completed 1, failed 15, total 28.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 7, waiting 5, completed 1, failed 15, total 28.
Loading of 'SAPSLEXC' import package: ERROR
Loading of 'SEOCOMPODF' import package: ERROR
Import Monitor jobs: running 5, waiting 5, completed 1, failed 17, total 28.
Import Monitor jobs: running 5, waiting 5, completed 1, failed 17, total 28.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 4, waiting 5, completed 1, failed 18, total 28.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 3, waiting 5, completed 1, failed 19, total 28.
Loading of 'SCPRSVALS' import package: ERROR
Import Monitor jobs: running 2, waiting 5, completed 1, failed 20, total 28.
Import Monitor jobs: running 3, waiting 4, completed 1, failed 20, total 28.
Import Monitor jobs: running 4, waiting 3, completed 1, failed 20, total 28.
Import Monitor jobs: running 5, waiting 2, completed 1, failed 20, total 28.
Import Monitor jobs: running 6, waiting 1, completed 1, failed 20, total 28.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 5, waiting 1, completed 1, failed 21, total 28.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 4, waiting 1, completed 1, failed 22, total 28.
Loading of 'SAPUSER1' import package: ERROR
Import Monitor jobs: running 3, waiting 1, completed 1, failed 23, total 28.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 1, failed 24, total 28.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 1, failed 25, total 28.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 1, failed 26, total 28.
INFO[E] 2011-02-28 14:06:03.156
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2011-02-28 14:06:03.542
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Did anyone out there encounter this issue before, please do share if you have any clues.
Thanks in advance.
DevanFrank,
Both the trans.log are look a same:- Log below:-
4 ETW000 R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 28.02.2011 - 18:41:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Feb 28 18:41:42 2011 646 0.000646
4 ETW000 [dev trc ,00000] db_con_init called 112 0.000758
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 137 0.000895
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/QAS/SYS/exe/run/dbdb6slib.so' ...
4 ETW000 279 0.001174
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/QAS/SYS/exe/run/dbdb6slib.so), hdl 0
4 ETW000 18747 0.019921
4 ETW000 [dev trc ,00000] Library '/usr/sap/QAS/SYS/exe/run/dbdb6slib.so' loaded
4 ETW000 321 0.020242
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/QAS/SYS/exe/run/dbdb6slib.so
4 ETW000 205 0.020447
4 ETW000 [dev trc ,00000] Version of '/usr/sap/QAS/SYS/exe/run/dbdb6slib.so' is "700.08", patchlevel (0.144)
4 ETW000 1353 0.021800
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/QAS/SYS/exe/run/dbdb6slib.so
4 ETW000 193 0.021993
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/QAS/SYS/exe/run/dbdb6slib.so
4 ETW000 187 0.022180
4 ETW000 [dev trc ,00000] New connection 0 created 177 0.022357
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 222 0.022579
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 125 0.022704
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 174 0.022878
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 205 0.023083
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '/usr/sap/QAS/SYS/global/db6/SUNOS_64/db6_clidriver/lib/libdb2.so' successfully loaded
4 ETW000 64288 0.087371
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
4 ETW000 201 0.087572
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 112 0.087684
4 ETW000 [dev trc ,00000] (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
4 ETW000 176 0.087860
4 ETW000 [dev trc ,00000] (0.8) Support of SDBUPDEXCL (note 847616) 117 0.087977
4 ETW000 [dev trc ,00000] (0.9) DB6: use export file for dbdb6slib (note 835135)
4 ETW000 185 0.088162
4 ETW000 [dev trc ,00000] (0.9) DB6: Core in getAndBindSQLDA (note 833183)
4 ETW000 191 0.088353
terminal. (note 1129573)
4 ETW000 192 0.096107
4 ETW000 [dev trc ,00000] (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
4 ETW000 179 0.096286
4 ETW000 [dev trc ,00000] Supported features: 114 0.096400
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 114 0.096514
4 ETW000 [dev trc ,00000] ..done 476 0.096990
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 117 0.097107
4 ETW000 [dev trc ,00000] Running with CLI driver 11927 0.109034
4 ETW000 [dev trc ,00000] Mon Feb 28 18:41:43 2011 194952 0.303986
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] CON = 0 (BEGIN)
4 ETW000 260 0.304246
4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30081N A communication error has been detected. Communication
4 ETW000 201 0.304447
4 ETW000 [dev trc ,00000] &+ protocol being used: "TCP/IP". Communication API being used: "SOCKETS". Location where the error was detected:
4 ETW000 195 0.304642
4 ETW000 [dev trc ,00000] &+ "172.21.32.13". Communication function detecting the error: "connect". Protocol specific error code(s): "146", "
4 ETW000 200 0.304842
4 ETW000 [dev trc ,00000] &+ ", "". SQLSTATE=08001
4 ETW000 212 0.305054
4 ETW000 [dev trc ,00000] &+
4 ETW000 196 0.305250
4 ETW000 [dev trc ,00000] &+
4 ETW000 224 0.305474
4 ETW000 [dev trc ,00000] &+
4 ETW000 200 0.305674
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] (END) 122 0.305796
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'QAS' as 'sapqas' failed
4 ETW000 526 0.306322
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'QAS'"
Output of the db command you requested:-
bash-3.00$ db2 list db directory
System Database Directory
Number of entries in the directory = 1
Database 1 entry:
Database alias = QAS
Database name = QAS
Local database directory = /db2/QAS
Database release level = c.00
Comment = SAP database QAS
Directory entry type = Indirect
Catalog database partition number = 0
Alternate server hostname =
Alternate server port number =
bash-3.00$ db2 list node directory (not sure why cant see this output, tried run as db2<sid> too)
SQL1027N The node directory cannot be found.
bash-3.00$ db2 get dbm cfg | grep SVCENAME
TCP/IP Service name (SVCENAME) = sapdb2QAS
Regards, -
SAINT Update on phase IMPORT ABAP Dictionary objects.
Hi All,
While uploading package using SAINT i am facing some errors. I am at phase CHECK_REQUIREMENTS and RUN_SPDD just completed, and getting the below message
button Repeat Skip Cust.Cockpit
"Phase CHECK_REQUIREMENTS: Explanation of Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in the SAP Notes 1081287,
1083709 and 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests."
I want to stop the upload. Please let me know
1) CAN I Stop the upload at this phase.
2) Will there any implication on the sytem if i stop it
3) How to stop it
Please reply as i m stuck here now.
RegardsThis question has been asked and answered in multiple occations.
Did you search before posting?... my guess is NO.
Read the "Rules of Engagement"
Regards
Juan -
Error number 207 error type SPECIFIC_CODE IMPORT ABAP phase error when install database instance
IMPORT ABAP phase error when install database instance
Error number 207 error type SPECIFIC_CODE.
In phase "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution?
Thanks in advance
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="IboSap-PC\nspadm" does not exist.
Failed action: with parameters
Error number 207 error type SPECIFIC_CODEIt is not easy, really , it has taken many hours and at the End I got the problems,.
so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
without any problem. In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
anyway. thank you for all.
Best Regards. -
DB2 9.7 DFACT.SQL syntax error in Import ABAP phase - System Copy
Hi all. I'm trying a system copy with a source system SAP ECC 6.0 ehp4 based on NW 701 and db2 LUW 9.1 .
As it seems supported by SAP, i'm using db2 LUW 9.7 in target system.
O.S. is Windows 2008.
I got an error in phase "Import ABAP".
Sapinst.log says:
INFO 2010-02-18 10:12:14.337
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2010-02-18 10:12:14.509
Switched to user: devadm.
INFO 2010-02-18 10:12:14.572
Creating file C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\import_monitor.java.log.
INFO 2010-02-18 10:12:14.603
Switched to user: devadm.
INFO 2010-02-18 10:12:14.618
Working directory changed to C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP.
INFO 2010-02-18 10:12:14.618
Output of C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2010-02-18 10:12:44.790
Execution of the command "C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_24-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_24-rev-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_24-rev-b06, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 73, failed 0, total 75.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 73, failed 1, total 75.
WARNING[E] 2010-02-18 10:12:44.790
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-02-18 10:12:44.790
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Looking into import_monitor.java.log i found that the problem is in dfact import.
I've looked into sapdfact.log and i found:
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100218105045
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Jan 28 2010 20:22:25
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
(DB) INFO: connected to DB
(DB6) INFO: COMPRESS YES is set during table creation.
(DB6) DB2 9.5 automatic dictionary creation does not require an explicit REORG.
(DB6) Compression threshold is ignored.
(GSI) INFO: dbname = "DEV "
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SRVSAPDEV"
(GSI) INFO: release = "6.0"
(GSI) INFO: version = "6002 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 26 Step 5)"
(DB) ERROR: DDL statement failed with SQL error
( ALTER TABLE "/BI0/E0PPM_VC1" DROP PRIMARY KEY )
(SQL error -539)
error message returned by dsql:
SQL0539N Table or nickname "SAPDEV./BI0/E0PPM_VC1" does not have a "PRIMARY" key. SQLSTATE=42888
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB6) INFO: executing DDL statements for object /BI0/E0PPM_VC1 from external SQL file.
(DB) ERROR: DDL statement failed with SQL error
( CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1" ("KEY_0PPM_VC1T" , "KEY_0PPM_VC11" , "KEY_0PPM_VC1U" , "KEY_0PPM_VC1P" ) USING STOGROUP ___FAI PRIQTY 16 SECQTY 10240 FREEPAGE 0 PCTFREE 0 GBPCACHE CHANGED DEFINE NO BUFFERPOOL BP3 COPY NO PIECESIZE 2097152 K CLUSTER NOT PADDED )
(SQL error -7)
error message returned by dsql:
SQL0007N The character "_" following "" ) USING STOGROUP" is not valid. SQLSTATE=42601
(DB) INFO: disconnected from DB
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100218105045
So as you can see it seems that there's some syntax error in dfacl.log. The wrong SQL statement referred by sapdfact.log is
ind: /BI0/E0PPM_VC1~0
sql: CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1"
("KEY_0PPM_VC1T" ,
"KEY_0PPM_VC11" ,
"KEY_0PPM_VC1U" ,
"KEY_0PPM_VC1P" )
USING STOGROUP ___FAI PRIQTY 16
SECQTY 10240 FREEPAGE 0 PCTFREE 0
GBPCACHE CHANGED DEFINE NO
BUFFERPOOL BP3 COPY NO
PIECESIZE 2097152 K CLUSTER NOT PADDED ;
|
ALTER TABLE "/BI0/E0PPM_VC1"
ADD PRIMARY KEY ("KEY_0PPM_VC1T",
"KEY_0PPM_VC11",
"KEY_0PPM_VC1U",
"KEY_0PPM_VC1P") ;
Am i missing something?
Data in referred tables (infocubes) isn't really important.
Is there a safe way to proceed?
Thanks in advance.
Regards
Simone ZaffalonAnd this is the strange point: my source system is not a BI and my dataclasses .SQL files are not empty.
Me too i would expect that the files should be empty but instead they are full of object definitions.
For example i have APPL0.SQL that contains a list of all tables of ECC system, for example
tab: MAMT
sql: CREATE TABLE "MAMT"
("MANDT" SAPDB6VARCHAR(000003)
DEFAULT '000' NOT NULL,
"MATNR" SAPDB6VARCHAR(000018)
DEFAULT ' ' NOT NULL,
"SPRAS" SAPDB6VARCHAR(000001)
DEFAULT ' ' NOT NULL,
"MEINH" SAPDB6VARCHAR(000003)
DEFAULT ' ' NOT NULL,
"MTXID" SAPDB6VARCHAR(000002)
DEFAULT ' ' NOT NULL,
"LFDNR" SAPDB6VARCHAR(000002)
DEFAULT '00' NOT NULL,
"MAKTM" SAPDB6VARCHAR(000040)
DEFAULT ' ' NOT NULL)
IN "&location&"
INDEX IN "&locationI&"
LONG IN "&locationL&"
COMPRESS YES;
ALTER TABLE "MAMT" LOCKSIZE ROW;
and like this for all others tables.
What would occur if i launch an import with such .SQL files?
(shuld i put this question to another thread or is fine for you to answer on this?)
Thank you again.
Simone Zaffalon -
SAP Netweaver 7.3 Installation stuck at import abap
Hi all,
I am trying to do a new installation of NW 7.3 by importing data from a system copy.
At the phase "import ABAP" the installation gets an error on step 32 (or something like that), then it continues but at the last 2 jobs it seems stucked.
Now I have this situation: running 1, waiting 1, completed 42, failed 1.
I am new to this operation, can you please help me?
In attach the import log and the error that is generated near step 32.Hi Luca
Could you refer the SAP Notes for Sql error 1750, 4902 1088
1752579 - SQL error 10011 Access denied
1170869 - Duplicated primary keys during system copy via R3Load
BR
SS -
Ecc6:import abap last more than 70 hours
windows 2003 ECC6SR3+sql server 2005
there is no error when i install it. but the phase import abap last more than 70 hours. the log shows that the last excuting run on the day the phase import abap begun.
i think it means that the installation has not activited more than 60 hours.
is there anyone meet the problem?
i need your help!
thank you !
best regards!hi Deepanshu and Markus
i had been watch at the task manager. from i found the installation was stopped, these columns of installation process has no changed.
CPU, mem Usage, I/O reads bytes, I/O wites bytes.
i had checked the last update time with the log file. it was updated on the day the import abap phase begun.
thank you for your advice!
best regards! -
TNS Listener Error During CE 7.2 Install Phase "Import Java Dump"
Hi All,
We are installing a new CE 7.2 system on AIX 6.1 with Oracle 10.2.0.4
(system name JDQ). We are receiving the following error during
installation phase "Import Java Dump:"
Oct 11, 2010 12:44:50 PM com.sap.inst.dbtools
[Thread[main,5,main]] Fatal:
com.sap.inst.common.exception.DBConnectionException:
java.sql.SQLException: Listener refused the connection with the
following error:
ORA-12505, TNS:listener does not currently know of SID given in connect
descriptor
at com.sap.inst.common.db.DBConnection.connect
(DBConnection.java:157)
at com.sap.inst.jload.Jload.main(Jload.java:226)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.offline.OfflineToolStart.main
(OfflineToolStart.java:161)
We chose "Typical" for the installation type and sapisnt chose port
1527 for the Oracle listener port by default. We are installing JDQ on
a server where other SAP instances are already installed.
Unfortunately, port 1527 is already in use by one of the other SAP
systems for its Oracle listener. We have tried the following to
resolve the error:
1) Changed listener port for JDQ
a. Changed the following files for JDQ to use port 1530 instead of
1527:
$ORACLE_HOME/network/admin/listener.ora
$ORACLE_HOME/network/admin/tnsnames.ora
/sapmnt/JDQ/profile/oracle/tnsnames.ora
b. Restarted the JDQ database and listener, then clicked Retry
c. Did not work. Exited and restarted the install, but this did
not work, either.
2) Changed listener name for JDQ
a. Changed the following files for JDQ to use listener
name "LISTENER_JDQ" instead of the default name of "LISTENER":
$ORACLE_HOME/network/admin/listener.ora
b. Restarted the JDQ database and listener, then clicked Retry
c. Did not work. Exited and restarted the install, but this did
not work, either.
d. Changed the listener name back to "LISTENER" and restarted the
DB and listener
3) Changed installation files containing port 1527
It looks like the installation saves the input parameters in files in
the instllation directory. After we changed the JDQ environment to use
the 1530 port, we thought maybe the install was getting 1527 from one
of the installation files. Therefore we tried the following:
a. Used command "find . -xdev -type f -exec grep -l -w 1527 {} \;"
to obtain a list of files containing port 1527.
b. Backed up these files
c. Edited these files, changing 1527 to 1530. Files modified
include the following:
control.xml
inifile.2.xml
inifile.3.xml
inifile.xml
keydb.2.xml
keydb.xml
summary.html
d. Clicked Retry, but still got the error
e. Exited the installlation and restarted it. We are still
getting the error.
4) I know that for Java systems, the listener port is stored in the
Secure Store. The SecStore.key and SecStore.properties files have been
installed in directory /usr/sap/JDQ/SYS/global/security/data; however,
configtool does not yet exist under /usr/sap/JDQ/J01; therefore I
cannot see whether port 1527 has been placed in the Secure Store.
Therefore, we did not take any action here.
What do we need to do to resolve the error?
Thanks in advance for any help you can provide.
TommyeHI ,
Could you please let us know how did you edit the secstore file without configtool ? How did you resolve the issue? I am facing the exact issue now..Please advice .
Regards,
Nibu Antony -
Error in SAP installation in phase 19 of 34 - Import ABAP
Hi SAP Gurus,
Good day all, I'm facing problem when installing SAP ECC 6.0 EHP7 (IDES version). Its stucked in phase 19 of 34 Import ABAP.
Below are the error details:-
ECC Message Box
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Process call 'D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.). You can now:
Choose Retry
to repeat the current step.
Choose Log Files
to get more information about the error.
Stop the option and continue later.
Log files are written to C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP.
Below are the logs from R3load.exe:-
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20141006062234
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:31:32
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 4612
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: DbSlErrorMsg rc = 29
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20141006062234
Looking forward for your reply.
Regards,
Jay
-96-Hi
I'm afraid you forget selecting the SSFS option during installation and it is the only connection method supported for kernel 7.40
It should be possible to fix this manually and perform all the step to connect using SSFS... but restarting your installation might be faster & easier.
1622837 - Secure connection of AS ABAP to Oracle via SSFS
As of SAP Kernel Release 7.40 (irrespective of the Oracle version), only the secure connection (secure connect) is supported via SSFS.
Regards -
ECC6.0 installation error in Import ABAP Phase
Dear Experts,
I am in the process if Installing IDES for ECC 6.0 Non Unicode
Installation (SAP ERP 2005 SR2). During IMPORT ABAP
phase geting below error:
ERROR 2007-12-13 14:48:37
CJS-30022 Program 'Migration Monitor' exits with error code 103. For
details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-12-13 14:48:37
FCO-00011 The step runMigrationMonitor with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was
executed with status ERROR .
Import_monitor.java.log:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 4, completed 31, failed 0, total 36.
Import Monitor jobs: running 2, waiting 3, completed 31, failed 0, total 36.
Import Monitor jobs: running 3, waiting 2, completed 31, failed 0, total 36.
Loading of 'SAPSSEXC_3' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 31, failed 1, total 36.
Import Monitor jobs: running 3, waiting 1, completed 31, failed 1, total 36.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 31, failed 2, total 36.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 31, failed 3, total 36.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 31, failed 4, total 36.
Import_monitor.log:
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\EC4\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\EC4\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080106214611
Please help me ASAP.
Regards,
Gajapathi Raju.Dear Marquis,
Some body copied dumps from Hard disk to server not from original cd's.Might be copied not properly.I have copied from Original cd's,Then i was suceed in installation.
Regards,
Gajapathi Raju.
Edited by: V R Gajapathi Raju on Feb 13, 2008 9:24 AM -
Create Index error on all jobs of import abap installation phase
Hello,
I'm facing an issue on import abap phase on IDES SAP ERP 2004 installation over SLES 11/MaxDB 7.6.03 build 9.
Logs below are focused on table REPOSRC because it is the first error over installation, the same error appear again and again for the next tables.
We ran the installation again changing the number of parallel processes to 1 job at time but finally nothing change.
sapdb log size : -rw-rw---- 1 sdb sdba 8808038400 Mar 30 23:01 DISKL001
cache_size = 159488
Thanks in advance, Deiby
import_monitor.log
TRACE: 2010-03-29 16:53:00 com.sap.inst.migmon.LoadTask run
Loading of 'REPOSRC' import package is started.
TRACE: 2010-03-29 16:53:00 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'REPOSRC' import package:
/usr/sap/IDS/SYS/exe/run/R3load -ctf I /software/51034985/51034985_2/EXP2/DATA/REPOSRC.STR /tmp/sapinst_instdir/ERP/SYSTEM/ADA/CENTRAL/AS/DDLADA.TPL REPOSRC.TSK ADA -l REPOSRC.log
TRACE: 2010-03-29 16:53:00 com.sap.inst.migmon.LoadTask processPackage
Loading of 'REPOSRC' import package into database:
/usr/sap/IDS/SYS/exe/run/R3load -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 10000
ERROR: 2010-03-29 16:53:04 com.sap.inst.migmon.LoadTask run
Loading of 'REPOSRC' import package is interrupted with R3load error.
Process '/usr/sap/IDS/SYS/exe/run/R3load -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 10000' exited with return code 2.
For mode details see 'REPOSRC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REPOSRC.log
/usr/sap/IDS/SYS/exe/run/R3load: START OF LOG: 20100329165300
/usr/sap/IDS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/IDS/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Jan 23 2008 17:32:58
/usr/sap/IDS/SYS/exe/run/R3load -ctf I /software/51034985/51034985_2/EXP2/DATA/REPOSRC.STR /tmp/sapinst_instdir/ERP/SYSTEM/ADA/CENTRAL/AS/DDLADA.TPL REPOSRC.TSK ADA -l REPOSRC.log
/usr/sap/IDS/SYS/exe/run/R3load: job completed
/usr/sap/IDS/SYS/exe/run/R3load: END OF LOG: 20100329165300
/usr/sap/IDS/SYS/exe/run/R3load: START OF LOG: 20100329165300
/usr/sap/IDS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/IDS/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Jan 23 2008 17:32:58
/usr/sap/IDS/SYS/exe/run/R3load -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 10000
DbSl Trace: prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS)
DbSl Trace: SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS)
(DB) INFO: connected to DB
(DB) INFO: The MaxDB logwriter is switched off#20100329165300
(DB) INFO: Savepoint on database executed#20100329165300
(DB) INFO: REPOSRC created#20100329165300
(DB) INFO: Savepoint on database executed#20100329165301
(DB) INFO: REPOSRC~0 created#20100329165301
DbSl Trace: writeLob() of C_0003, rc=1, rcSQL=-10201 (Function sequence error (no data for execution expected))
DbSl Trace: LOB_WRITE on connection 0, rc=-10201 (Function sequence error (no data for execution expected))
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOSRC"
(SQL error -10201)
error message returned by DbSl:
Function sequence error (no data for execution expected)
(DB) INFO: disconnected from DB
/usr/sap/IDS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/IDS/SYS/exe/run/R3load: END OF LOG: 20100329165304
/usr/sap/IDS/SYS/exe/run/R3load: START OF LOG: 20100330120734
/usr/sap/IDS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/IDS/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Jan 23 2008 17:32:58
/usr/sap/IDS/SYS/exe/run/R3load -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 10000
(DB) INFO: connected to DB
(DB) INFO: The MaxDB logwriter is switched off#20100330120734
(DB) INFO: Savepoint on database executed#20100330120735
(DB) INFO: REPOSRC deleted/truncated#20100330120735
DbSl Trace: writeLob() of C_0004, rc=1, rcSQL=-10201 (Function sequence error (no data for execution expected))
DbSl Trace: LOB_WRITE on connection 0, rc=-10201 (Function sequence error (no data for execution expected))
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOSRC"
(SQL error -10201)
error message returned by DbSl:
Function sequence error (no data for execution expected)
DbSl Trace: EXECUTE on connection 0, rc=-1452 (POS(1) Duplicate secondary key)
ERROR : Execute for create index BNK_BATCH_HEADERBA on BNK_BATCH_HEADER failed (dbrc=99).
(SQL error -1452)
error message returned by DbSl:
SQL-Statement: CREATE UNIQUE INDEX "BNK_BATCH_HEADERBA" ON "BNK_BATCH_HEADER" ( "MANDT" , "BATCH_NO" )
/usr/sap/IDS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/IDS/SYS/exe/run/R3load: END OF LOG: 20100330120739
REPOSRC.TSK
T REPOSRC C ok
P REPOSRC~0 C ok
D REPOSRC I err
Edited by: Deiby Alvez on Mar 31, 2010 10:39 PMhello friends,
i have a similar error in context of an unicode conversion in phase import with r3load. in logs in file D010TAB.log i see the following output:
DbSl Trace: EXECUTE on connection 0, rc=-7055 (POS(55) Column(s) already indexed:/BI0/E0D_DECU~P)
ERROR : Execute for create index /BI0/E0D_DECU~P on /BI0/E0D_DECU failed (dbrc=99).
(SQL error -7055)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "/BI0/E0D_DECU~P" ON "/BI0/E0D_DECU" ( "KEY_0D_DECUP" , "KEY_0D_DECUT" , "KEY_0D_DECUU" , "KEY_0D_DECU1" , "KEY_0D_DECU2" , "KEY_0D_DECU3" , "KEY_0D_DECU4" , "KEY_0D_DECU5" )
POS(55) Column(s) already indexed:/BI0/E0D_DECU~P
/usr/sap/SPV/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SPV/SYS/exe/run/R3load: END OF LOG: 20100414185908
45 / 47 are complete in phase import.
For a TEST Case , i have deleted all indices on tables in selection of /BI0/*. I will rerun this procedure. the largest part of indices on tables come from a bw-installation in a seperate client.
best regards,
christoph
Maybe you are looking for
-
Itunes can't update my version 4.0 to 4.3
hi, i have a 3gs, connected to itunes (10.2 latest version) and prompted me to upgrade my phone firmware. however, half way through, error message appear with code 3194 and unable to proceed further. Anyone knows whats wrong and any way to rectify? T
-
Help : how to configure attendance in schema (PE02)
dear SAP masters, can u help me find what's wrong with my schema? it can't work properly VARSTP2002 : - N - Y : HRS?4.00 : - < - = : - HRS=1 - ADDZLS2816 - > : - HRS=1 - ADDZLS28
-
Why is the website tutorial no longer loading?
I have installed the software recently and made a start on the tutorial but 2 days later the website will not load, I have no problem with the internet connection.
-
ITunes is continually opening itself
ITunes is continually opening itself, and prompting me to reverify my iCloud account. I have never used iCloud. How do I get it to stop? I'm being tortured by it, it interrupts everything constantly. I've tried force quits, continually scrubbing
-
How to connect webdynpro application to database (Sql server)
Hi Experts, Can someone suggest me how to connect webdynpro application to SQL Server. (Possibly in detail) Thanks Regards, Sandeep