SAPOffice message on MIGO

Dear All,
The functionality to send a SAPOffice message to the purchasing buyer when a goods receipt is performed does not appear to be working.
On the purchase order header delivery/invoice tab there is a GR message indicator, when this is selected the system should send a SAPoffice message to the purchasing buyer who created the order when the PO is goods receipted.
This functionality is not working.
Please suggest.
Warm regards

Hi,
I think SAP Office is not active in this case.
Please check.
Thanks,
Srinivas

Similar Messages

  • Need to convert Error message to Warning message in MIGO

    Hi Guys,
                   I need a warning message instead of error message in MIGO.
    For example if a material is having shell life expiry when i am doing GR,if I dont enter the Manufacturing date.Its gives a error meesage.
    The error message is in program MM07MMHD, MESSAGE e018(12).
    In configuration when i press F4 its has only one value 'E'.
    So how to change this to warning (W) instead of 'E'.
    Thanks,
    Prasad.

    Hello,
    Check the message in these T.Code and change category from E to W.
    OPJB for production messages
    OBA5 for CO messages
    OMT4 for material master messages
    OMCQ Batch and quantity related.
    Also you can check SE91 for this.
    Regards,
    Pallavi

  • Missing part message in MIGO

    Hello,
    we have activated the missing part message in MIGO using transaction OMBC.
    All is working fine and we receive an notification in business workplace.
    The problem is that only one person receives the mail and we want that all MRP controllers get an notification.
    In transaction OMBC under "Mail user" we can only maintain one "Recipient Name".
    But what is the meaning of "Recipient for mail to MRP controller"? Can we here use position to maintain all controolers in the organization model of the PD (PD-ORG)?
    Thanks
    Arnfried

    Hi There
    Specification of the mail recipient- System sends the missing part message to the material planner(MRP Controller) responsible for the material,, in order for this to happen , a user ID must be assigned to the material planner,,
    Specification of missing part expediter- if no user ID is assigned to the responsible material planner, the message is sent to the central missing part expediter responsible for the plant. This person is defined per plant,,
    So this is what happening in your place,,  maintain the user ID to the MRP controller,, then it will work fine,,
    Maintain the below settings--
    SPRO-IMG-Materials Management-Consumption-Based Planning-Master Data-Define MRP Controllers-Double click on MRP controllers-Maintain the field Recipient Name (User ID) then system will trigger the mail to MRP controllers...
    Hope it helps
    Thanks
    Senthil

  • FYI: Test Message in MIGO is empty

    Hi Experts,
    I have created PO and while executing T-code MIGO following error message displays on sreen and due to that unable to creat GR
    FYI: Test Message in MIGO is empty
    Message no. 00007
    Thanks
    Sanjay D

    hi,
    your question is not fillfull, but im suggesting while doing migo we need mentioned how much qty are receiving and you should accept the material  i mean you have to select check box under qty
    bai

  • Message at MIGO transaction

    Hi Gurus,
    I am using a BADI MB_DOCUMENT_BADI implementation.
    At the MB_DOCUMENT_BEFORE_UPDATE method, I am doing a call transaction at VT02N.
    I need put one message at MIGO transaction, that shows when VT02N call transaction was not succesfull.
    This badi doesn't have any returm messages parameters.
    Does anyone knows how can I return those messages to MIGO?
    I think that I can use EXPORT TO MEMORY, but I don't know where can I import and use.
    Thank you all.

    Done.

  • Execute transaction/report from SAPOffice message

    Is it possibile to execute directly a transaction or a report from a SAPOffice message ?
    In functions SO_DOCUMENT_SEND_API1 and SO_NEW_DOCUMENT_ATT_SEND_API1 in input structure DOCUMENT_DATA there are two fields (PROC_TYPE and PROC_NAME) that seem to give this possibility.
    I used them, together to table parameter OBJECT_PARB, but nothing happen.
    Regards,
    Antonino Musciumarra

    Send  .sap file in the attachment..
    check following thread:
    Re: Hyperlink to SAP documents in external emails
    G@urav.

  • Error message to Warning message in MIGO?

    Hi,
    When we are executing MIGO 411 K transaction we are getting error message 'Enter Vendor Number'. I want to supress change error message to warning message.
    Because my requirement is populate vendor dynamically based on combination of Material, Plant, Storage location and Batch. I got user exit for this User-exit (EXIT_SAPMM07M_001) when click on check button.
    We found a User-exit (EXIT_SAPMM07M_001) triggered when User clicks on 'CHECK' button. But since the vendor field (LIFNR) is a mandatory field in MIGO 411 K transaction, its throwing an error message 'Enter Vendor Number'. So unable to proceed further.
    so i want to change error message into warning message and then i will proceed.
    error message i m getting is " Enter vendor number for special stock k".
    Or is there any other to populate the vendor dynamically based on Material, Plant, Storage location and Batch. please help..
    thanks

    This error is dynamic call so you can't make this one as warning message but why don't you try to add the search criteria based on your requirement to the field of vendor in migo.
    e.g. when you do F4 or drop down you will see the list of vendor you can get from diff way.......so add one more earch criteria for your reqs here.

  • How to Find Location of Error Message in MIGO Transaction

    I keep getting an error in transaction MIGO: Create account N450010 for 08/07/2007 as a cost element in controlling area BFP1. According to the functional person the account has been created. Any other way to find out besides a "where-used" on the message class and number to find out where this message is coming from? The where used is not bringing me any results.....Thanks.

    Hi
    Probably the message is called dynamically, so u should try to check by debug when that message is raised.
    U can set a break-point for the statament MESSAGE.
    Max

  • Reg:Error message in MIGO Transaction

    Hi All,
    I added the new tab strip in MIGO Screen. now i need to make all the fields as mandatory. so using BADI (MB_MIGO_BADI) i gave the mandatory check ( if the Zfield = ' ', then error message) while clicking the check button before posting the material number. But it prevents to proceed further, simply it skips the transaction because of error message. and at the same time 'i should not use the information message'. my requirement is 'Error message should be populated after clicking the check button but it should allow to enter the mandatory fields after the error message'. i.e it should not skip the transaction after the error message.
    Please help me.
    Thanks & Regards
    Vijay.R

    Hi
    Probably the message is called dynamically, so u should try to check by debug when that message is raised.
    U can set a break-point for the statament MESSAGE.
    Max

  • Warning message in MIGO - Diference on Qty of entry/Qty in delivery note

    Hello,
    I want to set a warning (or even error) message when, in MIGO transaction, the quantity in the delivery note is higher than the quantity in unit of entry set up (both in the quantity screen).
    A message regarding the difference between the quantity in unit of entry and the quantity order is standard and is already set.
    How can I proceed?
    Thank you,
    Gonçalo.

    Hi,
    Thanks for the help, but I still can't manage to set the warning message. In fact I tried to set it on OMRM and in spro-mat management-purchasing-environment data-define messages. The only message I get in MIGO is M7021 (difference between the quantity order and the quantity in unit of entry (quantity details)... but I also want a message to occur in case of a difference in quantity of delivery note and qty in unit of entry.
    I set as much messages as possible, do you know what's the message regarding this warning on table V_160M_
    Thanks again,
    Goncalo.

  • Goods receipt message empty - MIGO with purchase order

    Hi,
    In MIGO, I do a goods receipt with reference to purchase order. On the purchase ordre the flag "Goods Receipt Message" is flagged.
    In my business workspace I receive the email, the message title is ok but message is empty, the text is not displayed. The issue is in my ECC6 system, it works fine in 4.6C system.
    Where can I customize the content of the mail.
    Can I see it in SO10, is this a standard text ?
    Thank you.

    closed

  • Warning message on MIGO

    Hi all,
    I'v set the Unlimited Overdelivery Allowed indicator at the PO.
    As client requirement, at the reception, I need to give a warning message in order to warn the user that he's receiving more than it's set on the PO.
    Can you give me a help on this?
    Many thanks,
    Afonso Pereira

    you need to take help of your technical team member (ABAP)
    During MIGO your code will fist validate if EKPO-UEBTK = X then
    If it is a first GR:-
    your Abaper need to validate EKPO-MENGE with GR Qty.
    If GR Qty is Greater than EKPO-MENGE then it should display Warning Message
    If you have already posted few Partial GR and creating another new one
    then (Sum of EKPO-WEMNG + MIGO Qty) is greater than  EKPO-MENGE then system should give Warning Message
    Hope this helps you

  • How can i add message in "migo"  ( good receipt ) ?

    how can i add message in transction "migo"  ( good receipt ) ?
    i tried userexit MBCF0002
    but i can't see more then one
    line of the order and the user
    get 3 messages ( in case of order with 3 lines )
    the badi's
    MB_DOCUMENT_BADI
    MB_MIGO_ITEM_BADI
    don't give me the option
    to add message .
    i tried to add message in the check or befor the save .
    this is the message  :
      CALL FUNCTION 'POPUP_TO_DIS
    PLAY_TEXT'
          EXPORTING
            titel              = text-001
           textline1          = text-001
          TEXTLINE2          = ' '
           start_column       = 25
           start_row          = 6.
       message s000 with text-002.
    ENDIF.

    OK, I'm on ECC6.0 system that's why you can't find it in 4.7 version.
    I'll copy and paste the sample code for you below.
    Sample Method IF_EX_MB_MIGO_BADI~CHECK_HEADER
    method if_ex_mb_migo_badi~check_header .
      data: ls_bapiret type bapiret2.
    * Refresh return table
      refresh: et_bapiret2.
    * Check header data (W-/E-Messages are useful)
      if gs_exdata_header-badi_nummer is initial.
        ls_bapiret-type       = 'W'.
        ls_bapiret-id         = 'M7'.
        ls_bapiret-number     = '895'.
        ls_bapiret-message_v1 = 'Enter number on external screen'(001).
        append ls_bapiret to et_bapiret2.
      endif.
    endmethod.                    "IF_EX_MB_MIGO_BADI~CHECK_HEADER
    Sample Method IF_EX_MB_MIGO_BADI~CHECK_ITEM
    method if_ex_mb_migo_badi~check_item .
      data: ls_extdata type migo_badi_example_screen_field,
            ls_bapiret type bapiret2.
    * Refresh return table
      refresh: et_bapiret2.
    * Read external data
      read table gt_extdata into ls_extdata
           with table key line_id = i_line_id.
    * Check if all entries are done (W-/E-Messages are useful)
      if ls_extdata-badi_erfmg is initial.
        ls_bapiret-type       = 'E'.
        ls_bapiret-id         = 'M7'.
        ls_bapiret-number     = '895'.
        ls_bapiret-message_v1 = 'Enter quantity on external screen'(002).
        append ls_bapiret to et_bapiret2.
      endif.
      if ls_extdata-badi_erfme is initial.
        ls_bapiret-type       = 'E'.
        ls_bapiret-id         = 'M7'.
        ls_bapiret-number     = '895'.
        ls_bapiret-message_v1 =
           'Enter unit of measure on external screen'(003).
        append ls_bapiret to et_bapiret2.
      endif.
    endmethod.                    "IF_EX_MB_MIGO_BADI~CHECK_ITEM
    Implement your according to the examples above.
    Hope this solves your problem.
    Cheers,
    Sougata.
    P.S. You need to create a brand new Z implementation via SE19 using the BADI definition MB_MIGO_BADI
    Edited by: Sougata Chatterjee on Dec 31, 2007 1:05 AM

  • ¿Why Print out message in Migo get duplicateg when event 4 in MN22 is selected?

    Hello,
    I am not able to find out why the print out message get duplicate when I change event 3 to event 4 in MN22.
    when I do Good issues in MIGO and the message "ZVAL" is set in event 3 "Send with application own transaction" only one type of message is been trigger in , but if I change event 3 to 4 "Send immediately (when saving the application)" in MN22 all the message get duplicated.
    Thanks
    Jorge G

    Hi,
       If you are using your own program in the processing routines for output type, then change it to standard program and form routine in NACE  as shown below and test the scenario again. Also check whether any routine is assigned against the output type in the procedure - if so, remove the routine also.
       Revert back with the result. If its working fine in this case, you need to check the custom program with the help of your technical team.
    Regards,
    AKPT

  • How  to print warning messages in MIGO transcation

    Dear Guru's
    While iam doing modification in userexit(ZXMBCU02) for MIGO. i have to get the warning message.
    if i maintain the message type warrning it is not getting in the pop-up window. if i maintian the same
    message type in Error mode.. iam getting that in the pop-up window. so can any one help me.
    i tried with this code:
    if i_mseg-bwart = '101' or
       i_mseg-bwart = '105'.
      clear: lv_bsart,
             lv_mwskz,
             lv_mwskz1.
      select single  bsart
        from  ekko
        into  lv_bsart
       where  ebeln = i_mseg-ebeln.
      select single  mwskz
        from  ekpo
        into  lv_mwskz1
       where  ebeln = i_mseg-ebeln
         and  ebelp = i_mseg-ebelp.
      if sy-subrc = 0.
        select single mwskz
          from zmm_taxcode_v0
           into lv_mwskz
           where bukrs = i_mseg-bukrs
             and bsart = lv_bsart.
        if sy-subrc = 0.
          if lv_mwskz1 = lv_mwskz  .
            message w000(8i) with 'PO contains' lv_mwskz
              'Tax code, Capture Excise invoice, then do MIGO'.
          endif.
        endif.
      endif.
    endif.
    Thanks and Regards
    Gsana

    Hi,
    The solution is to call the form naco_log of the standard program sapfm07r :
    PERFORM naco_log IN PROGRAM sapfm07r
    USING 'W' '8i '000'....

Maybe you are looking for