Saposcol not belonging to Kernel 7.1 ?
Dear SAP colleagues,
I have downloaded the last SAP Kernel 7.1. The saposcol does not belong to kernel 7.1.
Question :
Is there any reason why the SAPOSCOL does not belong to Kernel 7.1 ?
Do we still need to have a SAPOSCOL for kernel 7.1 ?
Thanks in advance for your input.
Best regards
SAP NetWeaverAdministrator
SAPHOSTAGENT takes over the saposcol control.
Look at the attached note for installation if you dont have hostagent running.
Link: [https://service.sap.com/sap/support/notes/1031096]
Similar Messages
-
SAPOSCOL not running in MS Cluster
Hi, gurus:
We have a problem with SAPOSCOL in a SAP ECC 6.0 system (SAP ECC 6.0 + NetWeaver 7.00 + Oracle 10.2 + Windows Server 2003 R2 Enterprise x64 Edition) running over a MS cluster:
Transactions OS06/ST06 shows no data, and they show an info message wich states: SAPOSCOL not running ? (shared memory not available ). When we checked this issue, we noticed that, in fact, there is no sapcoscol.exe task running in any node.
But when we try to start the service (both using microsoft services console and cmd commands) although we can see the process running in the node which owns all the resources, SAP seems not notice that. The information system shows in ST06>Operating System Collector>Status is the following:
iinterval 0 sec.
Collector Version:
Date/time 05.09.2008 16:55:01
Start of Collector
Status report
Collector Versions
running COLL 20.95 700 - 20.64 NT 07/10/17
dialog COLL 20.95 700 - 20.65 NT 08/02/06
Shared Memory attached
Number of records 575
Active Flag active (01)
Operating System Windows NT 5.2.3790 SP 2 BL-SAP2 4x AMD64 Level 1
Collector PID 0 (00000000)
Collector not running (process ID not found).
Start time coll. Thu Jan 01 01:00:00 1970
Current Time Fri Sep 05 16:55:01 2008
Last write access Mon Sep 01 11:28:23 2008
Last Read Access Fri Sep 05 15:54:00 2008
Collection Interval 10 sec (next delay).
Collection Interval 10 sec (last ).
Status read
Collect Details required
Refresh required
Header Extention Structure
Number of x-header Records 1
Number of Communication Records 60
Number of free Com. Records 60
Resulting offset to 1.data rec. 61
Trace level 3
Collector in IDLE - mode ? NO
become idle after 300 sec without read access.|
Length of Idle Interval 60 sec
Length of norm.Interval 10 sec
But saposcol.exe is running with a certain PID in the same note than SAP and Oracle under user sapservice<sid>
We have tried to run saposcol in several ways (as, I have noted before: from microsoft service console, from cmd line using "net start saposcol", using the saposcol under C:\WINDOWS\SapCluster and the one under
F:\usr\sap\PRD\sys\exe\run, fom the two nodes, accessing the cluster through several IPs...) and tried the commands saposcol -c and saposcol -k but we cannot get the saposcoll run. Moreover, we haven't found any log information. The only log we (and SAP) could find is the one located in C:\WINDOWS\SapCluster\dev_coll.
This log remain frozen at September 1st:
SAPOSCOL version COLL 20.95 700 - 20.64 NT 07/10/17, 64 bit, multithreaded, Non-Unicode
compiled at Feb 3 2008
systemid 562 (PC with Windows NT)
relno 7000
patch text COLL 20.95 700 - 20.64 NT 07/10/17
patchno 146
intno 20050900
running on BL-SAP2 Windows NT 5.2 3790 Service Pack 2 4x AMD64 Level 15 (Mod 65 Step 3)
12:04:16 01.09.2008 LOG: Profile : no profile used
12:04:16 01.09.2008 LOG: Saposcol Version : [COLL 20.95 700 - 20.64 NT 07/10/17]
12:04:16 01.09.2008 LOG: Working directory : C:\WINDOWS\SAPCLU~1
12:04:16 01.09.2008 LOG: Allocate Counter Buffer [10000 Bytes]
12:04:16 01.09.2008 LOG: Allocate Instance Buffer [10000 Bytes]
12:04:17 01.09.2008 LOG: Shared Memory Size: 71898.
12:04:17 01.09.2008 LOG: Connected to existing shared memory.
12:04:17 01.09.2008 LOG: MaxRecords = 575 <> RecordCnt + Dta_offset = 614 + 61
12:04:22 01.09.2008 WARNING: WaitFree: could not set new shared memory status after 5 sec
12:04:22 01.09.2008 WARNING: Cannot create Shared Memory
Kernel Info:
Kernel release 700
Compilation NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
Sup.Pkg lvl. 146
ABAP Load 1563
CUA load 30
Mode opt
Can anyone shed some light on the subject?
Thank you very much and kind regards
Edited by: Jose Enrique Sepulveda on Sep 6, 2008 2:10 AMDear bhaskar:
Thanks for your reply. We have considered balancing the system to the other node or reboot the system to free resources, in order to re-create the shared memory, but in the past, the balancing process (move resources from one node to the other) has caused problems. Since this is a critical system, stopping (or balancing) is not an option right now, and updating the kernel requires an ABAP stack reboot plus the kernel change : any changes in system configuration requires a longer approval/planning process than a reboot.
Moreover, the OS collecting system and its display in OS06/ST06 has worked fine until now.
Does anyone knows if a reboot has solved this kind of problem in a similar situation?
Thanks in advance
José Enrique -
Saposcol not running in OS400 - how to start in OS level
Hi everyone,
I am new to iSeries and I'm having trouble starting saposcol. My system is running in OS400 SAP ECC6.0 Kernel release 700.
ST06 is not displaying updated data so I killed the saposcol process in the OS level using <sid>OFR user. Everytime i tried to submit a job CALL PGM(SAPOSCOL) PARM ('-l') to start it, i only get the message "Job 040584/<sid>OFR/SAPOSCOL submitted to job queue QBATCH in library QGPL." But nothing happens after that.
When I check job queue QBATCH, it doesnt contain any job. I displayed all the jobs and found out that all the saposcol I called is in the OUTQ status. I still get the saposcol not runing error in ST06. I tried starting it in ST06 but it still gives me the error that saposcol is not running, shared memory not available. Can anyone please tell me how to start the saposcol? Thanks.Hi Sheryl,
We have had numerous problems with our OS Collector for the last several years too. I have a few steps that I follow to start the OS Collector when our collector fails.
1 - Make sure saposcol is using the latest patch from service.sap.com.
2 - Sign on to system as <SID>OFR and run the following commands.
CALL PGM(SAPOSCOL) PARM('-d')
Brings up the saposcol program in a dialog mode for commands to be keyed
key in the following in the saposcol dialog: clean
Cleans shared memory
key in the following: quit
Stop the OS collector with the following command:
CALL PGM(SAPOSCOL) PARM('-k')
key in the following in the saposcol dialog: leave
a message "shared memory deleted" or "shared memory not attached" should be displayed
key in the following: quit
Change directory to /usr/sap/tmp and rename file coll.put (rename to coll.put.old)
Try to start the OS Collector from ST06. Wait about 5 minutes and refresh statistics.
3 - Open a customer message with SAP. SAP has been very helpful with our saposcol restarts.
Hope this helps!
Traci -
my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?
Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish -
On my iCloud account I can see an alternate email ID which can be used to login to my account, this email ID does not belong to me so I need to delete it. Please advice the best possible way as it does. It show any option to delete that ID
Do the alternate e-mail address ends with me.com or icloud.com?
-
I keep getting this message: "That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name."
I'm trying to create a new id and e-mail using an e-mail address that is mine and has been mine for over a year - any ideas why this could be happening?Trying where? What sort of email address? The following answer is based on a guess as to what you are talking about.
If you already have an @me.com address, perhaps as a result of having had a MobileMe account, and you are now setting up an iCloud account with an Apple ID you will find you will be asked to create a new @me.com address, and that you can't add your existing one because it is already an Apple ID.
You can do one of two things:
1. Sign out at System Preferences; sign in with your existing @me.com address and enable Mail.
2. Stay signed in with the present ID and add your @me.com address in System Preferences>Mail, Contacts & Calendars.
If you have further questions, or if your situation is different from what I've assumed, do please post back, but in a suitable forum - this one is specifically about using these Forums. -
How to get rid of an Apple ID that does not belong to me
I purchased a 6 plus. I know and frequently use my apple ID and password as well as my I cloud ID and password. I set up my new phone with no problem but I noticed something strange. I kept getting a pop up with an apple ID prefilled waiting for a password. The apple ID prefilled is a s b c global email address and it does not belong to me or anyone on my accounts. I had six songs waiting for download and the only way to get them to go away is to remove this mysterious ID and change it to my own with my password. The songs instantly disappear and I have nothing to download. I would say no problem but this ID keeps resurfacing along with the 6 songs needing downloading. I have now tried to purchase 3 Tones through ITunes with my apple ID and will download them and am charged for them but they disappear after 1 day and the mysterious ID pops back up. This ID appears to be blocking me from downloading my purchases or being able to retain them once downloaded. How do I completely disassociate this ID with my phone and my ITunes account? I would like to add that it is popping up and doing the same thing to my husbands new iPhone 6 as well.
Tap Settings > General > Reset > Reset All Settings.
Reconfigure for your settings and accounts. -
Calendar on iOS 7.1: Cannot Save Event - That event does not belong to that event store.
Hi All,
I have an iPhone 5 running iOS 7.1.
Yesterday, while updating a birthday in the iPhone iOS calendar app (default calendar = GMail), I noticed that the new 'List View' in the iOS 7.1 calendar (and only that view) showed an event called 'New Event' - which has a start date of 2014 and an end date of 2001. If I go into that event, it will show me no title and no location - only, as mentioned, funny start and end times. The 'Delete Event' button is completely missing. This 'New Event' does not come up in any other view.
Trying to input a ficticious title with a valid start and end time into that event slot leads to a message from the calendar app saying: "Cannot Save Event - That event does not belong to that event store." I have deleted all calendars and re-add them again via settings, with / without soft and hard reset and tried every possible combination. Yet, the event will not disappear.
The funny thing is that this 'New Event' will still showed up, even when my GMail, work and iCloud calendars were disabled. I have, however, subscribed to a GMail calendar for Australian holidays, and there is a built-in 'Birthday' calendar that pulls the dates from the contacts (I do not use that contact field, though).
Does anyone have a similar issue? Any suggestions how to fix it?
Thanks in advance!
Edit: This 'New Event' does not seem to sync to any calendar other than on the iPhone - not to Gmail, not to work, not to iCloud.Had same problem. Although the phone looks off it actually isnt. If you actually turn it off and then on again this problem will disappear. I think its a memory overload issue that is solved by clearing the memory by turning it off.
Worked for me -
Error while trying to retrieve the task: EventId(complete) does not belong
Hi Experts,
I have created a process composer DC in which i have created a process with two human tasks.
Each tasks is binded with web dynpro Iviews (means followed all the steps neccesary).
I deploed the DC successfully. now i started the process and got a task in my UWL but on click of the task i got the below error.
Error while trying to retrieve the task: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
[EXCEPTION]
java.lang.IllegalArgumentException: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
I have rechecked the event that i have created in the component controller and Interface controller.
Can you please help me in debunging the error.
thanks
NarendraHi,
sounds like an program error. That is an problem which occurs if one or multiple components try to lock the same galaxy object at the same point in time. Did you configured something special on the given task? e.g deadlines?
My proposal is to open an Customer Message so that we can have a detailed look onto the system. If this is not possible could you please provide the complete trace file and some more details about the modeled task?
Best Regards
Andreas -
"Domain Users" group in Active Directory does not belong to any Group Membership in LC
Active Directory user belonging to "Domain Users" group does not belong to any Group Membership in LC, why does it not belong to "Domain Users" group?
Any way to correct this issue, without changing group membership on AD side?
If Active Directory user is member of "Domain Admins" or "Users" then these show same group membership in LC.
Thanks.If you want to use the Domain Users group for the purpose of representing all the users then you can use the "All principals in domain xxx" group which is created by UM.
Coming back to Domain Users group. For determining group membership in AD UM uses "member" attribute of the group object. "Domain Users" group is treated differently by AD. It is the default primary group for all the users and normally members of the primary group are not specified using the member attribute.So when we sync the data from AD "Domain Users" membership does not get completed. -
My Apple ID was disabled. I reseted it successfully. Afterwards, when I am trying to update the pending apps in App Store on my phone, in order to sign in to iTunes Store I am requested to enter a password to the wrong Apple ID which definitely does not belong to me ('[email protected]'). Of course, I don't know this password and, consequently, I can't connect to Itunes Store on my Iphone. As a result my Viber and Facetime are not active in the meanwhile. What should I do? Thanks in advance for kind help and solution.
Where did you get this iPhone?
Was it new or second hand?
You have to sign out then sign in with the correct Apple ID and password.
Settings > iTunes & App Store > Apple ID: > do it here. -
I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur
I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur
-
I keep getting error messages on the calendar since I downloaded the new software on my IPAD2. When I try to add a new event it either says "That event does not belong to that event store" or it says "the calendar has not been set". Does anyone know what these messages mean or how to address this?
I'm getting the same issue on my ipad2...I set up a new calender and now I keep getting this error message....how do I fix this?
-
WBS element does not belong to business area(Message No: CJ067)
Hi All,
While doing Billing through DP91 by giving the Sales Order No.,
it is giving the error "WBS element *****does not belong to business area** ".
The configuration between Business Area and Plant in Enterprise Structure level is fine.
Do let us know anything else need to be done to resolve the same.
Needless to say that helpful replies will be awarded points.
Best Wishes & Regards,
Raj Kumar Reddy.Hi Chandra,
Business Area was given both in CJ20N and Sales Order level.
Also both these business areas are same.
To be more clear:
Say in the error it has mentioned the business area as 'X'.
But in Sales Order and Project level, 'Y' has been maintained.
System is throwing 'X' error, because the same is maintained under Cost Center level.
I cannot change the business area in Cost Center to 'Y' because of my business restrictions.
Regards., -
A pool operation was specified for a pooled resource that does not belong t
hi i left the server running for days so my application was running i refresh the page by clicking the ok button in small popup box,the page was refresh but when i what to select my lov am geting this error
A pool operation was specified for a pooled resource that does not belong to the resource pool.
Error
java.lang.NullPointerException
Caused by: java.lang.NullPointerException
at oracle.adf.model.binding.DCIteratorBinding.initSourceRSI(DCIteratorBinding.java:1797)
at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1672)
... 187 more
## Detail 0 ##
java.lang.NullPointerException
at oracle.adf.model.binding.DCIteratorBinding.initSourceRSI(DCIteratorBinding.java:1797)
at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1672)
at oracle.adf.model.binding.DCIteratorBinding.internalGetRowSetIterator(DCIteratorBinding.java:1645)
at oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1607)
at oracle.jbo.uicli.binding.JUCtrlListBinding.setupListItems(JUCtrlListBinding.java:725)
at oracle.jbo.uicli.binding.JUCtrlListBinding.getDisplayData(JUCtrlListBinding.java:3586)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding$1.size(FacesCtrlListBinding.java:382)
at java.util.AbstractList$Itr.hasNext(AbstractList.java:339)
at oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils.addSelectItems(SelectItemUtils.java:207)
at oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils.getSelectItems(SelectItemUtils.java:78)
at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectOneChoiceRenderer.getSelectItems(SimpleSelectOneChoiceRenderer.java:98)
at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectBaseRenderer._renderContent(SimpleSelectBaseRenderer.java:208)
at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectBaseRenderer.renderElementContent(SimpleSelectBaseRenderer.java:122)
at oracle.adfinternal.view.faces.renderkit.rich.FormInputRenderer.encodeAllAsElement(FormInputRenderer.java:152)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:769)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:1140)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeMiddlePanes(PanelStretchLayoutRenderer.java:348)
at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:313)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
at oracle.adf.view.rich.render.RichRenderer.encodeStretchedChild(RichRenderer.java:2004)
at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer._renderPane(PanelSplitterRenderer.java:1360)
at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer.encodeAll(PanelSplitterRenderer.java:279)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)my lov is empty,but where i restart Instance IntegratedWebLogicServer all is fine what cause this error
Edited by: adf009 on 2013/04/03 9:28 AM
Edited by: adf009 on 2013/04/03 1:13 PMTry:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Maybe you are looking for
-
Error while creating Repository Service in informatica
Hi Guys, When i try to create repository service informatica8.1.1.I'm getting the below error driverconnect.exe has encountered a problem and needs to close.We are sorry for the inconvenience.
-
Getting error while running standalone Java application related to Workflow
Hi, I am using the following code import oracle.bpel.services.workflow.client.IWorkflowServiceClient; import oracle.bpel.services.workflow.task.model.Task; import oracle.bpel.services.workflow.client.WorkflowServiceClientFactory; import oracle.bpel.s
-
How to install and run Rules Manager in XE
I tried using Rules Manager in XE. Soon realized it is not installed. I ran the install scripts. Now it complains that java is not installed. Could not find initjvm scripts in XE. Has any one tried running Rules Manager on XE?
-
I've recently upgraded my system with pacman -Syu but it can't boot. It says something like it can't find dev/sda5 (where the system is installed) then i get to a recovery terminal o something. Help please!
-
I wrote a web service to retrieve data from Sybase by using EJB3.0/JPA it works fine in the OC4J embedded with JDev 10.1.3.1 but it got the following error when I deployed to SOA suite 10.1.3.1 can somebody help? Thanks <env:Body> <env:Fault> <faultc