SAPOSCOL not running

Hi All,
We have successfully migrated SAP 4.0b from V5R2 to V5R4 ,but after the migration ,from SAP Application side SAPCOSCOL is not running.
What could be the reason for this?
From OS side SAPOSCOL is running.
Is there any latest patch for SAPOSCOL that has to be applied?
Will appreciate the quick responses.
Thanks & Regards,
Prashant.

Hi,
yes you need to apply latest saposcol patch.
From OS side SAPOSCOL is running.
-> means at OS level saposcol is running but it did not collect any data.
SAPOSCOL has 4 collector jobs: CRTPFRDTA, QPMACLCT, QPMASRVR and QYPSPFRCOL.
If one of these jobs stops (either due to an error, or ended manually), SAPOSCOL job will keep running, but will not show any more data, until all 4 jobs are restarted.
Easiest way to do this, is to stop the 4 collector jobs and SAPOSCOL job, and restart SAPOSCOL collection
via STO6 menu (OS collector -> Start).
further check
Re: SAPOSCOL not running ? (shared memory not available ) after upgrade to V5R3
regards,
kaushal

Similar Messages

SAPOSCOL not running in MS Cluster

Hi, gurus:
We have a problem with SAPOSCOL in a SAP ECC 6.0 system (SAP ECC 6.0 + NetWeaver 7.00 + Oracle 10.2 + Windows Server 2003 R2 Enterprise x64 Edition) running over a MS cluster:
Transactions OS06/ST06 shows no data, and they show an info message wich states: SAPOSCOL not running ? (shared memory not available ). When we checked this issue, we noticed that, in fact, there is no sapcoscol.exe task running in any node.
But when we try to start the service (both using microsoft services console and cmd commands) although we can see the process running in the node which owns all the resources, SAP seems not notice that. The information system shows in ST06>Operating System Collector>Status is the following:
iinterval             0             sec.
Collector Version:
Date/time             05.09.2008 16:55:01
Start of Collector
Status report
Collector Versions
running                                   COLL 20.95     700     - 20.64     NT 07/10/17
dialog                                   COLL 20.95     700     - 20.65     NT 08/02/06
Shared Memory                              attached
Number of records                         575
Active Flag                              active     (01)
Operating System                         Windows NT     5.2.3790 SP     2 BL-SAP2 4x AMD64 Level 1
Collector PID                              0 (00000000)
Collector                                   not running (process ID not found).
Start time coll.                              Thu Jan 01     01:00:00 1970
Current     Time                              Fri Sep 05     16:55:01 2008
Last write access                         Mon Sep 01     11:28:23 2008
Last Read Access                         Fri Sep 05     15:54:00 2008
Collection Interval                         10     sec     (next delay).
Collection Interval                         10     sec     (last ).
Status                                   read
Collect     Details                         required
Refresh                                   required
Header Extention Structure
Number of x-header          Records          1
Number of Communication     Records          60
Number of free Com.          Records          60
Resulting offset to     1.data rec.               61
Trace level                                   3
Collector in IDLE -     mode ?               NO
become idle after     300     sec     without     read access.|
Length of     Idle Interval                    60     sec
Length of     norm.Interval                    10     sec
But saposcol.exe is running with a certain PID in the same note than SAP and Oracle under user sapservice<sid>
We have tried to run saposcol in several ways (as, I have noted before: from microsoft service console, from cmd line using "net start saposcol", using the saposcol under C:\WINDOWS\SapCluster and the one under
F:\usr\sap\PRD\sys\exe\run, fom the two nodes, accessing the cluster through several IPs...) and tried the commands saposcol -c and saposcol -k but we cannot get the saposcoll run. Moreover, we haven't found any log information. The only log we (and SAP) could find is the one located in C:\WINDOWS\SapCluster\dev_coll.
This log remain frozen at September 1st:
      SAPOSCOL version COLL 20.95 700 - 20.64 NT 07/10/17, 64 bit, multithreaded, Non-Unicode
      compiled at   Feb 3 2008
      systemid      562 (PC with Windows NT)
      relno         7000
      patch text    COLL 20.95 700 - 20.64 NT 07/10/17
      patchno       146
      intno         20050900
      running on    BL-SAP2 Windows NT 5.2 3790 Service Pack 2 4x AMD64 Level 15 (Mod 65 Step 3)
12:04:16 01.09.2008   LOG: Profile          : no profile used
12:04:16 01.09.2008   LOG: Saposcol Version : [COLL 20.95 700 - 20.64 NT 07/10/17]
12:04:16 01.09.2008   LOG: Working directory : C:\WINDOWS\SAPCLU~1
12:04:16 01.09.2008   LOG: Allocate Counter Buffer [10000 Bytes]
12:04:16 01.09.2008   LOG: Allocate Instance Buffer [10000 Bytes]
12:04:17 01.09.2008   LOG: Shared Memory Size: 71898.
12:04:17 01.09.2008   LOG: Connected to existing shared memory.
12:04:17 01.09.2008   LOG: MaxRecords = 575 <> RecordCnt + Dta_offset = 614 + 61
12:04:22 01.09.2008 WARNING: WaitFree: could not set new shared memory status after 5 sec
12:04:22 01.09.2008 WARNING: Cannot create Shared Memory
Kernel Info:
Kernel release    700
Compilation        NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
Sup.Pkg lvl.       146
ABAP Load       1563
CUA load           30
Mode                opt
Can anyone shed some light on the subject?
Thank you very much and kind regards
Edited by: Jose Enrique Sepulveda on Sep 6, 2008 2:10 AM

Dear bhaskar:
Thanks for your reply. We have considered balancing the system to the other node or reboot the system to free resources, in order to re-create the shared memory, but in the past, the balancing process (move resources from one node to the other) has caused problems. Since this is a critical system, stopping (or balancing) is not an option right now, and updating the kernel requires an ABAP stack reboot plus the kernel change : any changes in system configuration requires a longer approval/planning process than a reboot.
Moreover, the OS collecting system and its display in OS06/ST06 has worked fine until now.
Does anyone knows if a reboot has solved this kind of problem in a similar situation?
Thanks in advance
José Enrique

SAPOSCOLL not running...shared memory not available...!!!!

Hi All,
The saposcoll is always getting terminated with a error message "shared memory not available".We have tried all possible remedies but it was of no use, There is no version mismatch and and there is also one saposcoll service running on that host.The problem is coming after we have upgraded our system.
Please suggest me some suitable notes or any solution for it as it is a production server.
Ashwini

Hi,
Please have a look at below link.
SAPOSCOL not running ? (shared memory not available )
Also Check SAP Note 548699 - FAQ: OS collector SAPOSCOL.
Hope this helps.
Thanks
Sushil

SAPOSCOL not running:Shared Memory not available

Dears,
On my PI 7.1 server when I go to ST06 I get message:
SAPOSCOL not running:Shared Memory not available
Please suggest.
Shivam

few suggestions
FAQs on saposcol - http://www.saptechies.com/os-collector-saposcol/
SAP Note 165188 - saposcol not running on AIX-DB2
SAP Note 548699 - FAQ: OS collector SAPOSCOL
SAP Note 103135 - DB2-z/OS: Installing saposcol manually
Regards
Sekhar

Saposcol not running in OS400 - how to start in OS level

Hi everyone,
I am new to iSeries and I'm having trouble starting saposcol. My system is running in OS400 SAP ECC6.0 Kernel release 700.
ST06 is not displaying updated data so I killed the saposcol process in the OS level using <sid>OFR user. Everytime i tried to submit a job CALL PGM(SAPOSCOL) PARM ('-l') to start it, i only get the message "Job 040584/<sid>OFR/SAPOSCOL submitted to job queue QBATCH in library QGPL." But nothing happens after that.
When I check job queue QBATCH, it doesnt contain any job. I displayed all the jobs and found out that all the saposcol I called is in the OUTQ status. I still get the saposcol not runing error in ST06. I tried starting it in ST06 but it still gives me the error that saposcol is not running, shared memory not available. Can anyone please tell me how to start the saposcol? Thanks.

Hi Sheryl,
We have had numerous problems with our OS Collector for the last several years too. I have a few steps that I follow to start the OS Collector when our collector fails.
1 - Make sure saposcol is using the latest patch from service.sap.com.
2 - Sign on to system as <SID>OFR and run the following commands.
CALL PGM(SAPOSCOL) PARM('-d')
     Brings up the saposcol program in a dialog mode for commands to be keyed
key in the following in the saposcol dialog: clean
     Cleans shared memory
key in the following: quit
Stop the OS collector with the following command:
CALL PGM(SAPOSCOL) PARM('-k')
key in the following in the saposcol dialog: leave
     a message "shared memory deleted" or "shared memory not attached" should be displayed
key in the following: quit
Change directory to /usr/sap/tmp and rename file coll.put (rename to coll.put.old)
Try to start the OS Collector from ST06. Wait about 5 minutes and refresh statistics.
3 - Open a customer message with SAP. SAP has been very helpful with our saposcol restarts.
Hope this helps!
Traci

Saproot.sh script not running

Hi All
1)I upgraded kernel 700 to patch 185.its solaris machine.and then i tried to run saproot.sh script,but it is saying like
./saproot.sh SID
./saproot.sh: whoami: not found
./saproot.sh: test: argument expected
i gave full permission to saproot.sh and saposcol
2)I run a command 'cleanipc 00 remove' from then it is giving dump 'PXA_NO_SHARED_MEMORY'
i increased buffersize also but of no use.
when i go to st06 it is giving err 'SAPOSCOL not running?(shared memory not available)'
manually itried to run saposcol but it is saying no shared memory.
appreciate the responses.
Thank you

>
Santosh Kulkarni wrote:
> Hi All
>
> 1)I upgraded kernel 700 to patch 185.its solaris machine.and then i tried to run saproot.sh script,but it is saying like
>
> # ./saproot.sh SID
> ./saproot.sh: whoami: not found
> ./saproot.sh: test: argument expected
>
./saproot.sh SID needs to be execute from root user
> i gave full permission to saproot.sh and saposcol
>
> 2)I run a command 'cleanipc 00 remove' from then it is giving dump 'PXA_NO_SHARED_MEMORY'
> i increased buffersize also but of no use.
> when i go to st06 it is giving err 'SAPOSCOL not running?(shared memory not available)'
> manually itried to run saposcol but it is saying no shared memory.
>
> appreciate the responses.
>
> Thank you
Check this link
http://help.sap.com/saphelp_bw30b/helpdata/en/95/df4002597211d3b473006094b910d9/content.htm
http://www.saptechies.com/os-collector-saposcol/
Regards,
Subhash

Saposcol is running intermittently

Good Day Experts,
Can you guide me on how to solve the issue we are facing in SAPOSCOL? The situation is this, after startfing the saposcol using this command "saposcol -l" it works fine then while checking on st06 data is there. However, after few minutes and refreshing st06 the data seems gone and I am getting this error "SAPOSCOL not running Shared Memory not available". And what I did after is that I logged off from SAP and log in again and SAPOSCOL works fine again. However after few minutes of refreshing the data in st06 seems gone again.
What I noticed is that SAPOSCOL is running intermittently in SAP.
Regards,

Hi James,
Look into SAP Note 548699 - FAQ: OS collector SAPOSCOL
7th point will help you in removing/releasing shared memory
Regards
Nick Loy

SAPOSCOLL is not running

Hi Experts
In my system SAPOSCOLL is not running, when i try to enter st06 system throwing error "saposcoll is not running (shared memory available).
we are using os400, ecc6 & DB2.
Thanks in Advance
Venkat

Hi
The operating system collector SAPOSCOL is a stand-alone program that runs in the operating system background. It runs independently of SAP instances exactly once per monitored host. SAPOSCOL collects data about operating system resources, including:
·        Usage of virtual and physical memory
·        CPU utilization
·        Utilization of physical disks and file systems
·        Resource usage of running processes
SAPOSCOL makes the data available using a segment of the shared memory for various applications and all SAP instances on a host. A CCMS agent or a dialog work process reads the data from the shared memory. You can display the data in various monitoring architecture monitors or in the operating system monitor (transactions OS07 and ST06). If the operating system data is read and sent by CCMS agents, you can display operating system data for any hosts in a central system.
Please check if the saposcol is running properly at OS level or not. The reason for this is saposcol should start before the sap application server, since it creates a shared memory segment where it store the information which is collected by it.
When the SAP application server starts up , it looks for the shared memory segment which was created earlier,if the memory segment is present SAP app server attaches to that segment and ST06 works fine.If saposcol was not running when SAP app server started. The shared memory segment isn't present and hence ST06 and other transactions relying in SAPOSCOL doesn't work even after you startup saposcol later.
Oerating system monitor and file system monitoring is part of it.
Hope it helps.
Edited by: Esha Rajpal on Sep 3, 2008 7:07 PM

SAPOSCOL not runnin? (Shared memory not available)

Hi SAP Experts,
OS:AIX, DB:DB2; R/3: 4.7 ; SID:PW1;
ST06 showing SAPOSCOL is not running
Status Bar shows:SAPOSCOL not runnin? (Shared memory not available)
I checked below
cpaiss51:pw1adm 6> id
uid=15271(pw1adm) gid=506(sapsys) groups=720(sysadm)
pw1adm 7> saposcol -s
Shared Memory:           not attached
no further information available ***
file permission is ok
-rwsr-x---   1 root     sapsys      1118225 Sep 14 2006 saposcol
cpaiss51:pw1adm 10> file saposcol
saposcol:       64-bit XCOFF executable or object module not stripped
Advanced thanks for Quick reply
Thanks & Regards
Kishore

Hi Ruchit,
SAPOSCOL -s is already pasted (It shows the Status of SAPOSCOL)
DEV_COLL
========
cpaiss51:pw1adm 61> more dev_coll
      SAPOSCOL version COLL 20.89 640 - AIX v6.55 5L-64 bit 060323, 64 bit, single threaded, Non-Unicode
      compiled at   May 8 2006
      systemid      324 (IBM RS/6000 with AIX)
      relno         6400
      patch text    COLL 20.89 640 - AIX v6.55 5L-64 bit 060323
      patchno       126
      intno         20020600
      running on    cpaiss51 AIX 1 5 000F3B6F4C00
15:30:06 26.10.2006   LOG: Profile          : no profile used
15:30:06 26.10.2006   LOG: Saposcol Version : [COLL 20.89 640 - AIX v6.55 5L-64 bit 060323]
15:30:06 26.10.2006   LOG: Working directory : /usr/sap/tmp
15:30:06 26.10.2006   LOG: Process Monitoring active.
15:30:06 26.10.2006   LOG: searching for Process Monitoring Templates in /usr/sap/tmp/dev_proc
15:30:06 26.10.2006   LOG: searching for Process Monitoring Templates in /usr/sap/tmp/procmon/
15:30:06 26.10.2006   LOG: INFO: /usr/sap/tmp/procmon does not exist or cannot be opened.
15:30:06 26.10.2006   LOG: INFO: Files for Process Monitoring in /usr/sap/tmp/procmon are ignored.
15:30:06 26.10.2006   LOG: INIT    : Disk data collected for 5 disks (0 filtered)
15:30:06 26.10.2006   LOG: INIT    : Network data collected for 3 interfaces
15:30:06 26.10.2006   LOG: INIT    : Global CPU data collected.
15:30:06 26.10.2006   LOG: INIT    : CPU data collected for 4 cpus
Thanks & Regards,
Kishore Reddy

Intermedia is not running properly

Hi All,
I am new to oracle.I could not able to make the oracle intermedia
run properly.would u please let me know what are the neccassary
steps should be taken for running the intermedia properly on NT.I
would appriciate if u give me information in detail. from
installing intermedia,configuring it to testing it if it
installed properly.I want it on NT.
I could run it on SOLARIS with the help os "Oracle8i interMedia
Text 8.1.5 - Technical Overview " found from oracle site.This
document is specific to unix. And it is not helping me.I couldnt
find such a document for NT.
My testing result is below.
Thanks a lottttttttttttttt.
-Rahul
SQL> exec ctx_output.start_log('log');
BEGIN ctx_output.start_log('log'); END;
ERROR at line 1:
ORA-20000: ConText error:
DRG-50704: Net8 listener is not running or cannot start external
procedures
ORA-28575: unable to open RPC connection to external procedure
agent
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.CTX_OUTPUT", line 39
ORA-06512: at line 1
null

Dear all,
Thanks a lot for your responses. Perhaps I have not explained enough clear.
For a long period, it was working properly without doing the configurations and setting of cluster environment.
Anyway last week we realized that something strange was happening because it displays no data on ST06, so after doing some changes, we have implemented note 112266. We have done on Tuesday and it began to display data. All seemed to be ok.
On Friday we have a reboot of the server, and after that data are not anymore displayed.
Here are the data requested:
saposcol -k
Setting Stop Flag :
15:32:49 06.05.2010   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
15:32:49 06.05.2010   LOG: ==== The collection process will stop as soon as possible
Collecting process has stopped.
15:32:50 06.05.2010   LOG: Shared memory deleted.
saposcol -l
Starting collector (create new process)
saposcol -s
Collector Versions :
running : COLL 20.95 701 - 20.68 NT 09/03/27
dialog : COLL 20.95 701 - 20.68 NT 09/03/27
Shared Memory       : attached
Number of records   : 4025
Active Flag         : active (01)
Operating System    : Windows NT 5.2.3790 SP 2
Collector PID       : 9596 (0000257C)
Collector           : running

HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

When KM Scheduler is stopped or not running

Hi Experts,
I have created KM Scheduler using the blog https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515.Scheduled for every 30 mins.
In Systemadmin>Monitor> KM-->i can see whether Scheduler is running or not.
Now the requirement is to send a mail to the portal support team when Scheduler is stopped or not running. Is it possible?and how we can proceed?
Please guide me.
Sony.

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

KM Scheduler Task is not running...

Dear All,
I have created a KM Scheduler Task using the NDWS Wizard. I followed prakash's blog (http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515). My doubt is where exactly the attributes are created? and can any one guide how to create the attributes in .cc.xml file. And how does public void run( String id, Properties properties ) it works?
The application was successfully deployed. I am able to see my task under System Administration->System Configuration->Knowledge Management->Configuration->Content Management->Global Services->Scheduler Tasks. but I think it is not running. Can any one give some clue on this. As i'm not finding any thing uder Kmcontent>Documents.
Do i need to configure anything to run KM scheduler Task?
Thanks and Regards,
JAGAN.
Edited by: Jagan456533 on Jan 19, 2011 11:10 AM

Hi Jagan,
The status "0" for your task in "Component Monitor" is fine.
Navigate to System Administration> System Configuration>Service Configuration. You can see here Applications and Portal runtime.
Open Applications--> and you Task. Right click on your task folder and say Administrate. Here you check whether your task has been stopped, running. Make sure its running. ( Try refresh, if its already running ).
In you task folder, you will see "Service Folder" under this, you will see "RFServiceWrapper", right click on it and say configure, make sure the values are like shown below:
Name : http://sapportals.com/xmlns/cm/sch
Value: Value1
Also make sure in your portalapp.xml, the values are same:
RFServiceWrapper
service-config
className= com.sap.netweaver.rf.wrapper.RFServiceWrapper
startup= true
service-profile
Name= = http://sapportals.com/xmlns/sch
Prof= Value1
You see tha the same name is used "Value1" in RFServiceWrapper both in portalapp.xml and in Service Configuration.
You can use any other name but the it should be same in both the places.
Make all these changes, and then restart your task in Service configuration again. Any changes in portalappl.xml, restart is necessary.
Kind Regards,
Poornima

Why will firefox not start on my laptop? can't uninstall or open the profile manager either. it simply does not run. it used to work fine until i had to restore my system.

had firefox 4.0 & have been a user of firefox for a few years now. never had any problems. had to do a system restore after my computer detected a virus of some sort & i couldn't do anything. the virus kept popping up a bogus add for me to buy an antivirus program. had to restart laptop in safemode to initiate the restore. ever since then firefox has not opened. can't even uninstall it or open the profile manager. anything that has to do with firefox will simply not run/open at all. i'm stumped.

System restore can cause problems as well as solve them, it has probably completely mucked up your Firefox installation.
Try deleting your Firefox installation directory, the default location on 32 bit Windows is C:\Program Files\Mozilla Firefox\
Now re-install Firefox, it should pick up your current profile folder so you should not lose your bookmarks, passwords etc.

Oracle XE 11g x64 does not run. No *DBF files inside of the XE folder. Windows 7 Pro x64.

Hello everyone!
I hope you are doing well all. In my case I have some troubles by installing Oracle XE 11g on my PC. My OS is Windows 7 Pro x64.
1. I activated the Administrator mode on my PC (net user Administrator /active:yes)
2. Started the setup as Administrator. The setup process was finished successfully with no errors showed.
3. Started the Database, OracleServiceXE, OracleXETNListener and other services.
4. Tried to connect using sqlplus-> connect system ->password, what in result gave me ORA-01034 Oracle not available and ORA-27101 Shared memory realm does not exist errors.
5. Then I recognized that my C:\oraclexe\app\oracle\oradata\XE folder is empty when it should be usually full with 6 DBF file.
6. I opened the cloneDBCreation.log and it contains these data:
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> exec dbms_backup_restore.zerodbid(0);
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> shutdown immediate;
ORA-12560: TNS:protocol adapter error
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora";
ORA-12560: TNS:protocol adapter error
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> alter system enable restricted session;
SP2-0640: Not connected
SQL> alter database "XE" open resetlogs;
SP2-0640: Not connected
SQL> alter database rename global_name to "XE";
SP2-0640: Not connected
SQL> alter system switch logfile;
SP2-0640: Not connected
SQL> alter system checkpoint;
SP2-0640: Not connected
SQL> alter database drop logfile group 3;
SP2-0640: Not connected
SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\app\oracle\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED;
SP2-0640: Not connected
SQL> select tablespace_name from dba_tablespaces where tablespace_name='USERS';
SP2-0640: Not connected
SQL> select sid, program, serial#, username from v$session;
SP2-0640: Not connected
SQL> alter user sys identified by "&&sysPassword";
SP2-0640: Not connected
SQL> alter user system identified by "&&systemPassword";
SP2-0640: Not connected
SQL> alter system disable restricted session;
SP2-0640: Not connected
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\postScripts.sql
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-12560: TNS:protocol adapter error
SQL> set echo on
SQL> spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\postScripts.log
I spent around 2 days to come to this reason and now I do not know what to do next.
My actions to resolve this problem:
1. Checked if my user has administrative rights and belongs to ora_dba. It does!
2. Turned Microsoft UAC off.
3. Set the system and local variables of ORACLE_BASE, ORACLE_HOME, ORACLE_SID, PATH, TNS-ADMIN to the appropriate values in Enivornment Variables:
     - ORACLE_BASE -> C:\oraclexe
     - ORACLE_HOME -> %ORACLE_BASE%\app\oracle\product\11.2.0\server
     - ORACLE_SID -> XE
     - Added to PATH -> C:\oraclexe\app\oracle\product\11.2.0\server\bin;
     - TNS_ADMIN -> %ORACLE_HOME%\network\admin
4. Removed Oracle XE 11g and reinstalled to another drive. No sense!
Some more errors:
1. C:\oraclexe\app\oracle\product\11.2.0\server\config\log\XE.bat.log
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Ein Mitglied konnte in der lokalen Gruppe nicht hinzugefugt oder entfernt werden, da das Mitglied nicht vorhanden ist.
It means -> O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
I understand that I need to logon as batch job. I added me to this policy in User Rights Assignments, but still I get these "DIM-00019: create service error" and "O/S-Error: (OS 1387)". And I guess just therefore my database is not starting well.
2. 127.0.0.1:8080/apex/f?p=4950 is not starting in browser. It is probably because the database is not running appropriately. For this issue have already seen one topic in Google that the HTTP Properties inside the Listener Status must be set to 8080 to make this link work. But in my case I do not see this line in my Listener Status:
Some other information relevant to the issue:
1) echo %USERNAME% - Administrator
     echo %USERDOMAIN% - ildar-PC
2) Listener.log:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
3) Tnsnames.log
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
4) Sqlnet.log:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
5) While connecting by sqlplus, I get this errors/messages:
6) Confirmation that I've got admin rights and I am in ORA_DBA:
If u need some more information from me, please let me know!!
Guys please help me to solve this issue, 'cause I've almost got frustrated to find out the solution of this problem. Thank you beforehand!!
Kind regards,
ildar

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

SAPOSCOL not running

Similar Messages

Maybe you are looking for