Saposcol "not set to [Maximize Throughput for Network Application]" W2008

Hi experts, I have sent a customer message to SAP asking "saposcol
show not set to [Maximize Throughput for Network Application" in
Windows 2008. But the answer is really strange. Is he correct?
========
26.06.2009 - 09:28:37 CET -  by SAP     
Dear Customer,
Installation guides clearly specify that configuring this memory
management option is not required for systems in Windows 2008.
Also, if you check note 65761, you will see that the note was last
modified on 20.04.2007, and the current version of sapntchk was not
modified since then (version 5.0.0.13). This obviously means that
sapntchk checks the memory management settings of your system as if
your operating system was a Windows 2000 or 2003, as Windows 2008
still did not exist.
Taking into account both considerations, you can disregard this message
raised by sapntchk and keep calm at the same time.
Right away, I send you back this message so you can close it at your
earliest convenience.
Best Regards,
<name removed>

Hello Dennis,
Here is the way to find if the Maximize Throughput is enabled or not on windows 2008.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters\size
Your choices for this registry key are 1,2 and 3.
1 = Minimize Memory Used
2 = Balance
3 = Maximize Throughput for File Sharing and Maximize Throughput for Network Applications
Be sure to set this to (3). By default it is configured to 1.
Best Regards
Kiran Kumar

Similar Messages

  • HT201270 i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

    i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

    capriz wrote:
    i have just updated my old 3GS ...
    To what... iOS 7 is Not supported on the 3 GS

  • I can not set up a firewall for my computer.  I can get to the place I'm supposed to get to but am unable to click start.

    I can not set up a firewall for my computer.  I can get to the place I'm supposed to get to but am unable to click start.

    If the Start Firewall button is grey (inactive) check to see if the pad lock is "locked" in the lower left corner of the screen.  If so, click it and enter the Administrator password to unlock it.  Then you can start the firewall.
    Hope this helps.

  • "Device Pin not set in TransConfig.xml.for translator RimBB" message when I try to sync my BBZ10 with Outlook Calendar and Contacts

    Hello, Does anyone know how I can sync my BBZ10 with my computers Outlook Calendar and Contacts? It was working but since my computer returned from being repaired it doesn't sync and gives me the following message
    "Device Pin not set in TransConfig.xml.for translator RimBB"

    I did resolve it, it was so long ago but here's what I suggest:
    -First remove the software on your computer by going to the add/remove programs if you're using a PC. If you're using Mac, I'm not sure where you go. 
    -Then go to BB website and download the correct program for you phone
    -Check both your phone and computer have all their updates
    With the newest updates I have no trouble syncing my calendar/contacts from my PC to my BB and vice versa. It was just initially when the BB was so new they hadn't updated the programs. Over time the fixed the glitch, this is why I recommend you remove the program you have and start over, it will probably fix itself.

  • Not happy to find out that "Siri" funtion is not set up to search for buisnessess in Aus

    Just discovered that "Siri" function is not set up to search for a business in Australia i.e Siri! can you find me a Italian restaurant nearby??? "sorry can only search for this in U.S and in U.S English.  Went to my local Apple store thinking this would be a simple fix only to be dissapointed with being told this function is not set up for use in Aus.

    5 minutes on Apple's Australian site would have told you that.

  • Cpreferencesmanager configuration value for /Preferences/Account_1_65538/SyncAccountId_2 not set in TransConfig.xml for Translator Rim BB

    I'm getting this message when trying to sync my BB calendar with Outlook 2010 ver 14.0.7153.500  SP2 MSO cpreferencesmanager configuration value for /Preferences/Account_1_65538/SyncAccountId_2 not set in TransConfig.xml for Translator Rim BB Is there a fix for this? I'm a new owner of the BB Classic 10 Thank you.

    Although this shows for a different version of Link it is the same error and the only info available:
    http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=6B27934ACA9100D504829F8506B4AFE3?...
    If you do not have this version upgrading may help:
    https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...

  • Set the default pathname for the application server

    Dear Guru,
    I have encountered an issue in CG3Z and CG3Y
    I am not able to set the default pathname for the application server
    can any one give some guideline how to set the default pathname for the application server.
    Thanks and regards
    Saifur Rahaman

    Hi Saifur,
    There is no such option in CG3Z or CG3Y. If you still want to do it you will have to customize it by copying the program RC1TCG3Z & RC1TCG3Y  to Z & the Function Modules C13Z_FRONT_END_TO_APPL & C13Z_APPL_TO_FRONT_END to Z & also the program LC13ZF01 to Z which runs both of these transactions.
    And finally the data declaration in the program LC13ZF01  as :-
    DATA:      L_FILE_NAME_FTAPPL          LIKE RCGFILETR-FTAPPL value 'you default pathname'
               DATA:      L_FILE_NAME_FTFRONT         LIKE RCGFILETR-FTFRONT value 'you default pathname'.
    Regards
    Abhii

  • Help! "The iTunes application could not be opened. You do not have enough access privileges for this application"

    I am getting the following error when trying to open iTunes: "The iTunes application could not be opened. You do not have enough access privileges for this application." I am logged in with the admin (and only) user account on my laptop, so I'm confused as to why this would start happening all of the sudden.
    I poked around in the control panel trying to find random options that would fix it, but nothing has. I'm running Windows 7.
    Thanks for any help!

    have you seen this discussion ?

  • How to set the stack size for alchemy application?

    Anybody know how to set the stack size for alchemy application?
    If you know, please tell me how to adjust the stack size for alchemy application?

    Hi,
    The stack size is set as public const gstackSize in the alchemy generated code.  You can see this if you build with ACHACKS_TMPS set.  The default is one megabyte.
    One way to change the stack size is to use llvm-dis to disassemble avm2-libc/lib/avm2-libc.l.bc, generating avm2-libc.l.ll, modify the constant, and then use llvm-as to recompile your modified library and overwrite the old one.  These utilities should be in your path if alchemy is set up.

  • How to set custom master page for sharepoint application page ?

    Hello,
    I need to apply custom master page for the custom application page I created for login purpose.
    Can anyone please let me know how to apply master page for custom application page ?
    Note : I need to set custom master page for application page at web application level.
    thanks,
    Dipti Chhatrapati

    Hi Dipti,
    You can use the same reference as ASP.NET
    Example
    "<%@ Page Language="C#" masterpagefile="../_catalogs/masterpage/minimal.master" title="teste" inherits="Microsoft.SharePoint.WebPartPages.WebPartPage, Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" meta:webpartpageexpansion="full"
    meta:progid="SharePoint.WebPartPage.Document" %>"
    You can use SharePoint Designer 2010
    http://www.microsoft.com/download/en/details.aspx?id=16573 to make the reference from you aspx page to you custom masterpage.
    When you are editing a aspx page you can go to ribbon "Style" and attach the custom Masterpage.
    André Lage Microsoft SharePoint, CRM Consultant
    Blog:http://aaclage.blogspot.com
    Codeplex:http://spupload.codeplex.com/http://simplecamlsearch.codeplex.com/

  • Dell 968w..how do I set the IP address for network printing?

    Attempting to connect my Dell 968w to the network for access by my HP and Dell laptops.  Dell said I need an IP address for the printer..how do I set the address??? 

    you need to contact dell printer support for this info...this is usually done by printing a network config page on your printer & you'll see the printer ip address there.
    Note:
    Although I work for HP Imaging & Printing
    Group , I am speaking for myself and not for
    HP.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Why is my OS X Server not recognizing an ethernet option for network

    I recently ran a brand new install of MAC OS X Server on my mac mini.  It now does not give me an option to set up an ethernet connection.  Could this be because the ethernet card is bad?  Or are the settings that I have missed during the new install?
    Thank you,
    Gary

    When you go into network from the system prefferences what do you see on the left hand side?
    If for some reason you do not see ethernet click on the plus button below and then see if you can pick ethernet from the interface pull down. If not you may just have a hardware problem.

  • Why is Paper Saving option not available in Windows 7 for network printer HP OfficeJet J5750

    I have an HP OfficeJet J5750 printer connected to my desktop running Windows XP via a USB port. I just purchased a new laptop running Windows 7 that is connected to the network through a wireless connection. When I print from my laptop I am unable to change the printer's preferences to be able to print multiple pages on one sheet, as in the paper saving option. Why is this? How can I access this option?

    Hi,
    Those are not programming mistakes, but those are limitations of the product, please check the printer specifications below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&tmp_track_link=ot_faqs/top_issues/en_u...
    As you may find under Paper-handling specifications > Paper tray capacities, Tray 2 only support Plain Paper.
    Maximum DPI is only only supported on Photo Paper, therefore those limitations are applicable.. these limitations are also listed on the Printing Specifications section above, Maximum DPI is listed as 4800 by 1200 dpi:
    Color print resolution: HP enhanced photo quality with Vivera inks (up to 4800 by 1200 dpi Optimized on HP Premium Plus photo papers with 1200 x 1200 input dpi)
    As well that can be find listed within the Print photos on photo paper or the Print borderless documents sections, you may simply search for Maximum DPI within the user guide as a reference:
    http://h10032.www1.hp.com/ctg/Manual/c03026243.pdf
    Those are not an issues with the printer but those expected limitations fully meet the product specification.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Alert Watch: can not define a MB unit for network inbound

    I want to create a alert rule for the cloud service, this rule is defined as the network inbound is less than 100MB within one hour, what makes me confused is that I can not find a MB unit, only byte unit can be used. Can anyone help or repost this issue
    to azure team?

    Hi,
    It's very strange, when I edit the alert rule that build yesterday, it gives me the error as below, however, I edit it with a new value 10000, it works as normal, and I receive the alert email (content:   'Network in GreaterThan 10000 (Count) in the
    last 5 minutes' was activated for CloudService: ), please try to create a new alert rule, and give further information here.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Set up grid control for Oracle application 11i

    Hi,
    I want to set up the grid control for his/her application 11i.
    Our system is on 11.5.10.2 and the database is 10.1.0.4
    Is there any good documentation for this?
    Thanks,
    Lily

    Yes, please have a look at Metalink Note 308320.1.
    Cheers,
    B.

Maybe you are looking for

  • How do I order multiple different cards from iPhoto in the same order?

    I would like to create and order numerous different cards in iPhoto. How can I put the different cards in one order instead of each different card being a separate order?

  • How share an iTunes music library on a mac with 2 networked PC

    I have an iMac with my iTunes music library. I have two PCs on the same network. I would like the 2 Windows PC to be able to show all the music in the Mac library and stream it, without having to copy it all to the local drive. Please assume I am tec

  • How can I add a new task to an online project from outlook

    At the moment, I can see tasks in outlook. I can modify them. But cant add a new one. Seems strange behaviour.

  • File Size Problem

    I got a picture of 4kb, and used photoshop(cs4) to paint white all,so it changed to white rectangle, then saved it. that's for web site logos, so it must keep the picture size same as original (ex, 70px * 50px). The problem I have was, the saved pict

  • Need help on coverting sql statement to NamedQueries

    hi, all, I have a problem on converting the following SQL statement returning last 10 records from an Oracle database. The SQL statement is as followings: select * from (select * from TABLE1 where ATT1 = 1 order by ATT2 desc) where rownum<11 However,