SAPPHIRE TECHNOLOGY RADEON HD 3850 512 MB GDDR3 AGP

Does this card work with dual G5 under OSX 10.4.11 ?
Bought a NVIDIA GeForce NV40 6800 Ultra 256MB DDL (DVI/DVI) (AGP Pro ) - but it caused lots of crashes. Power failures/restarts. Once I put back the old ATI 9850 crashes stopped.
I can get
SAPPHIRE TECHNOLOGY RADEON HD 3850 512 MB GDDR3 AGP
for about $100. How does this work for Second Life?
Thanks

In Second Life, the NVIDIA GeForce NV40 6800 Ultra 256MB in my dual G5, 4.5 GB Ram, OSX 10.4.11 - would run fine for 3-10 mins or so, then suddenly drop down to 1-2 frames per second and also would interfere with typing in chat too. Very frustrating.
It also was causing random power-offs, and I had to go through the Opt-startup menu before boot each time, just to keep from power off during system startup. Once I went back to my old video card all those problems went away.
The old card will only show "Low Quality" graphics in SL though.
Under OSX 10.5.8, the 6800 Ultra does work, albeit only at 10-15 fps.
The X800XT on ebay here is:
http://cgi.ebay.co.uk/ATI-Radeon-X800-XT-256Mb-AGP-Graphics-Card-DVI-SVGA-/35034 1703377?cmd=ViewItem&pt=UKComputing_Computer_Components_Graphics_Video_TV_Cards_TW&hash=item5191fe26d1#ht_ 1314wt913
cheers!

Similar Messages

Upgrade MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. to recommended system requirements for heli simulator: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB.

I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

Alternatives to ATI Radeon X1900 XT 512 MB

Hi Guys,
I'm pretty sure my ATI Radeon X1900 XT 512 MB graphics card has failed...
I run MacPro1,1 (2008) Dual-Core Intel Xeon with 2 x 23-inch DVI Apple Cinema Displays. Tonight only one of the screens would wake from sleep - the screen in port 2.
I've tried...
1. Swapping the DVI cables, this results in the non waking screen waking and the waking screen, not waking.
2. Tried running just one screen off DVI port 1 and nothing happened, blank screen but power light on.
3. Tried running same screen off DVI port 2 and still nothing happened, blank screen but power light on.
To re-cap - None of the DVI ports work on their own and only Port 2 works when both screens are plugged in.
So... is there any other tests or checks I can do to confirm 100% it's a faulty card? I've unplugged and done the SMC reset.
Secone part to this - if the card is shot can anyone recommend an upgrade to the ATI Radeon X1900 XT 512 MB?
Thanks
Pete

You could use a Mini-DisplayPort to DVI adaptor on one of the ports, I would think. Otherwise, you don't have two many choices. You might look for a used ATI 4870, Mac Edition model. It's performance will be similar to the 5770 since the 2006 MP only has PCI-e 1.0 slots so the 5770 can't take advantage of it's capabilities if installed in a PCI-e 2.0 slot.
Other cards that will work include the older Nvidia 8800 GT for Mac. You must be sure with these other cards that you look for the ones that are compatible with a Mac Pro. These were the ones made specifically for Apple. Non-Apple cards will not work unless you have the hardware, ability, and knowledge to re-flash ROMs.

Will fifa12 run in my iMac with specs..2.5 GHz Intel Core i5, 4 GB 1333 MHz DDR3, AMD Radeon HD 6750M 512 MB, Mac OS X Lion 10.7.4 (11E53).

Will fifa12 run in my iMac with specs..?
2.5 GHz Intel Core i5,
4 GB 1333 MHz DDR3,
AMD Radeon HD 6750M 512 MB,
Mac OS X Lion 10.7.4 (11E53).

here is what you need. Yes it looks like it'll run fine
MAC
Mac OS® X 10.6.8 (Snow Leopard) or higher
PROCESSOR
Intel® Core™ 2 Duo processor
This game will not run on PowerPC (G3/G4/G5) based Mac systems.
MEMORY
4 GB RAM or more
GRAPHICS
ATI HD2600 or NVIDIA GeForce 9400M or greater with 256 MB of Video RAM.
This game will NOT run on the Intel GMA 950, X3100 or HD3000 class of video cards.
INPUT
Keyboard and mouse, or a supported controller*. Logitech® F310/F510 recommended. Microsoft® Xbox 360® or XInput Controllers are NOT officially supported. *NOTE: If your controller comes with a driver, please make sure that you have the most up-to-date controller drivers installed. Controllers without analog sticks do not allow for full functionality within the title.
FILESIZE
6.8GB
LANGUAGES
English, French, Italian, German, Spanish
OTHER REQUIREMENTS
Requires Origin account for game activation and online play.

ATI Radeon X1900 XT 512 MB graphics card has failed?

I think my ATI Radeon X1900 XT 512 MB graphics card has failed...
This is a MacPro 1,1 (2006). We're on our yacht in a French territory, South Pacific, so local support is non-obtainium. I would appreciate any advice on how I can confirm my graphics card is dead.
I have only 23" Apple Cinema Display for testing. The display works great on MBP, so that end is good.
The MacPro seems to boot normally - AFAIK based on startup sounds, fan, RAM LED diagnostic lights.
Suggestions?

Case A) the screen goes blank at the login screen
invoke Safe Mode (hold down the Shift key at Startup).
This performs a five minutes or so Disk Utility ( Repair Disk) on the boot drive, then demands your userId and password, even if you normally auto-login.
Safe Mode only loads the absolutely essential Drivers, and the graphics drivers are not considered essential. So screen re-draw may be slow, but you can check your email, surf a little, do many operations that do not require graphics acceleration.
Edit movies? Probably not.
Case B) your screen completely blank
If the power-on light flashes in a pattern, that indicates not enough good RAM to start up.
If no power light flashing, you need some function you can invoke that will show a non-graphics result.
The Caps Lock light on the keyboard is under software Control. If it works, at least the SMC controller that talks to the keyboard is working.
Holding down Control while pressing the Eject key on the keyboard brings up this familiar dialog box, whether you can see it or not:
any key except:
R for Restart;
S for Sleep;
Esc for cancel;
and return for the default Shut Down
should cause the System Beep sound. S should Sleep it, and the power light should shortly indicate that it is sleeping. Any key will then wake it up.

Problem w Dual Monitors on ATI Radeon HD 4870 512 MB

Hi I'm having problems with Dual Monitors on ATI Radeon HD 4870 512 MB, Mac Pro 2009.
Setup: I'm running two 27" DELL U2713HM Displays at 2560x1440 one via direct DVI cable and the other one thru the Mini Display Port via Dual Link DVI adapter.
Now when I boot up the left screen displays the start-up apple as it should but then both screens go black and the right one (DVI connection) comes on while the left one stays black, goes into power safe mode. When I go into preferences > Displays I even get only one single display as if there were no multiple connected. It's however NOT a connection problem, since it works during the boot up sequence.
Any idea what might be wrong with my set-up? Do I need a new graphics card?

You do have the dual-link adopter connected to USB power right?
Next I would try using a displayport to mini displayport cable. You monitors have:
Connectors VGA, 4 x USB 3.0, DVI-D (HDCP), HDMI, DisplayPort 1.2,
That cable is about $10
http://partnerdirect.dell.com/sites/channel/Documents/Dell-UltraSharp-U2713HM-Mo nitor-Brochure.pdf

[SOLVED] Radeon HD 3850 / Radeon open source driver

Hello,
My laptop broke and for some time now I am using my old desktop pc (2008), on which I have arch linux and manjaro, dual booted.
My problem is that if I want a long video (over 20 minutes my whole pc is becoming slow and the screen becomes sluggish, mouse too. At first I thought that the ram is not clearing but I 'sudo rm -rf /tmp/' and check htop and ram is not full. CPU is normal so I believe it has something to do with the graphics card.
Please help me track the source of the problem!
If you need any more info please let me know!
USING:
XFCE4
lspci:
nexus@nexus ~> sudo lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV670/680 HDMI Audio [Radeon HD 3690/3800 Series]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface (rev b2)
05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
dmesg | grep 'radeon'
nexus@nexus ~> dmesg | grep 'radeon'
[ 8.854595] [drm] radeon kernel modesetting enabled.
[ 8.854642] fb: switching to radeondrmfb from VESA VGA
[ 8.855089] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 8.855091] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 8.855149] [drm] radeon: 512M of VRAM memory ready
[ 8.855150] [drm] radeon: 512M of GTT memory ready.
[ 9.312998] [drm] radeon: power management initialized
[ 9.367406] radeon 0000:01:00.0: WB enabled
[ 9.367409] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800765bbc00
[ 9.378005] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0xffffc900122921d0
[ 9.378010] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 9.378028] radeon 0000:01:00.0: irq 31 for MSI/MSI-X
[ 9.378038] radeon 0000:01:00.0: radeon: using MSI.
[ 9.378057] [drm] radeon: irq initialized.
[ 10.272486] fbcon: radeondrmfb (fb0) is primary device
[ 10.272506] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 10.272507] radeon 0000:01:00.0: registered panic notifier
[ 10.293348] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
cat /proc/meminfo
sudo cat /proc/meminfo
[sudo] password for nexus:
MemTotal: 2053268 kB
MemFree: 543480 kB
MemAvailable: 962164 kB
Buffers: 53308 kB
Cached: 520696 kB
SwapCached: 0 kB
Active: 904312 kB
Inactive: 372332 kB
Active(anon): 710112 kB
Inactive(anon): 50588 kB
Active(file): 194200 kB
Inactive(file): 321744 kB
Unevictable: 16544 kB
Mlocked: 16544 kB
SwapTotal: 3999992 kB
SwapFree: 3999992 kB
Dirty: 108 kB
Writeback: 0 kB
AnonPages: 719092 kB
Mapped: 321640 kB
Shmem: 51740 kB
Slab: 52188 kB
SReclaimable: 30728 kB
SUnreclaim: 21460 kB
KernelStack: 5136 kB
PageTables: 26016 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 5026624 kB
Committed_AS: 2944536 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 306608 kB
VmallocChunk: 34359425532 kB
HardwareCorrupted: 0 kB
AnonHugePages: 196608 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 165376 kB
DirectMap2M: 1931264 kB
lshsw
nexus@nexus ~> sudo lshw
nexus
description: Desktop Computer
product: P5K PRO (To Be Filled By O.E.M.)
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 64 bits
capabilities: smbios-2.4 dmi-2.4 vsyscall32
configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=40BB001E-8C00-0118-6394-001FC61593C0
*-core
description: Motherboard
product: P5K PRO
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev 1.xx
serial: MS1C81BY2A07369
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 1303
date: 12/16/2008
size: 64KiB
capacity: 960KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: (To Be Filled By O.E.M.)
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz
serial: To Be Filled By O.E.M.
slot: LGA775
size: 3819MHz
width: 64 bits
clock: 402MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm dtherm
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 64KiB
capacity: 64KiB
capabilities: internal write-back data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 3MiB
capacity: 3MiB
capabilities: internal write-back instruction
*-memory
description: System Memory
physical id: 3b
slot: System board or motherboard
size: 2GiB
capacity: 2GiB
*-bank:0
description: DIMM [empty]
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
*-bank:1
description: DIMM [empty]
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
*-bank:2
description: DIMM [empty]
product: PartNum2
vendor: Manufacturer2
physical id: 2
serial: SerNum2
slot: DIMM2
*-bank:3
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum3
vendor: Manufacturer3
physical id: 3
serial: SerNum3
slot: DIMM3
size: 2GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-pci
description: Host bridge
product: 82G33/G31/P35/P31 Express DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: 82G33/G31/P35/P31 Express PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:24 ioport:b000(size=4096) memory:fe800000-fe8fffff ioport:d0000000(size=268435456)
*-display
description: VGA compatible controller
product: RV670 [Radeon HD 3690/3850]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:31 memory:d0000000-dfffffff memory:fe8e0000-fe8effff ioport:b000(size=256) memory:fe8c0000-fe8dffff
*-multimedia
description: Audio device
product: RV670/680 HDMI Audio [Radeon HD 3690/3800 Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:29 memory:fe8fc000-fe8fffff
*-usb:0
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:a800(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:0
description: Mouse
product: USB Optical Mouse
vendor: Logitech
physical id: 1
bus info: usb@1:1
version: 54.00
capabilities: usb-2.00
configuration: driver=usbhid maxpower=98mA speed=2Mbit/s
*-usb:1
description: Keyboard
product: ActiveJet K-2024 Multimedia Keyboard
vendor: Elan Microelectronics Corp.
physical id: 2
bus info: usb@1:2
version: 1.07
capabilities: usb-2.00
configuration: driver=usbhid maxpower=100mA speed=2Mbit/s
*-usb:1
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #5
vendor: Intel Corporation
physical id: 1a.1
bus info: pci@0000:00:1a.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:21 ioport:a880(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:2
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #6
vendor: Intel Corporation
physical id: 1a.2
bus info: pci@0000:00:1a.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:ac00(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb
description: Audio device
product: USB Sound Device
vendor: C-Media INC.
physical id: 2
bus info: usb@4:2
version: 0.10
capabilities: usb-1.10 audio-control
configuration: driver=snd-usb-audio maxpower=500mA speed=12Mbit/s
*-usb:3
description: USB controller
product: 82801I (ICH9 Family) USB2 EHCI Controller #2
vendor: Intel Corporation
physical id: 1a.7
bus info: pci@0000:00:1a.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:18 memory:fe7ffc00-fe7fffff
*-usbhost
product: EHCI Host Controller
vendor: Linux 3.18.13-1 ehci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 3.18
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb
description: Mass storage device
product: DataTraveler 111
vendor: Kingston
physical id: 5
bus info: usb@2:5
logical name: scsi6
version: 1.10
serial: 001CC0C61220BCB18323003A
capabilities: usb-2.10 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=498mA speed=480Mbit/s
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@6:0.0.0
logical name: /dev/sdb
size: 14GiB (15GB)
capabilities: partitioned partitioned:dos
configuration: logicalsectorsize=512 sectorsize=512 signature=670821d0
*-volume
description: Windows FAT volume
vendor: mkfs.fat
physical id: 2
bus info: scsi@6:0.0.0,2
logical name: /dev/sdb2
version: FAT16
serial: b772-b198
size: 15EiB
capabilities: primary boot fat initialized
configuration: FATs=2 filesystem=fat label=MISO_EFI
*-multimedia
description: Audio device
product: 82801I (ICH9 Family) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 02
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:28 memory:fe7f8000-fe7fbfff
*-pci:1
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:25 ioport:1000(size=4096) memory:80000000-803fffff ioport:fdf00000(size=1048576)
*-pci:2
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 5
vendor: Intel Corporation
physical id: 1c.4
bus info: pci@0000:00:1c.4
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:26 ioport:d000(size=4096) memory:fea00000-feafffff ioport:80400000(size=2097152)
*-ide
description: IDE interface
product: 88SE6101/6102 single-port PATA133 interface
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:03:00.0
version: b2
width: 32 bits
clock: 33MHz
capabilities: ide pm msi pciexpress bus_master cap_list
configuration: driver=pata_marvell latency=0
resources: irq:16 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:feaffc00-feaffdff
*-pci:3
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 6
vendor: Intel Corporation
physical id: 1c.5
bus info: pci@0000:00:1c.5
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:27 ioport:c000(size=4096) memory:fe900000-fe9fffff ioport:80600000(size=2097152)
*-network
description: Ethernet interface
product: 88E8056 PCI-E Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: 12
serial: 00:1f:c6:15:93:c0
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.4 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:30 memory:fe9fc000-fe9fffff ioport:c800(size=256) memory:fe9c0000-fe9dffff
*-usb:4
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:a080(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:5
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:19 ioport:a400(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@6
logical name: usb6
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:6
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:a480(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@7
logical name: usb7
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:7
description: USB controller
product: 82801I (ICH9 Family) USB2 EHCI Controller #1
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci cap_list
configuration: driver=ehci-pci latency=0
resources: irq:23 memory:fe7ff800-fe7ffbff
*-usbhost
product: EHCI Host Controller
vendor: Linux 3.18.13-1 ehci_hcd
physical id: 1
bus info: usb@8
logical name: usb8
version: 3.18
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-pci:4
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: 92
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
resources: ioport:e000(size=4096) memory:feb00000-febfffff
*-firewire
description: FireWire (IEEE 1394)
product: VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
vendor: VIA Technologies, Inc.
physical id: 3
bus info: pci@0000:05:03.0
version: c0
width: 32 bits
clock: 33MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=64 maxlatency=32
resources: irq:16 memory:febff800-febfffff ioport:ec00(size=128)
*-isa
description: ISA bridge
product: 82801IR (ICH9R) LPC Interface Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-ide:0
description: IDE interface
product: 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 02
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
resources: irq:22 ioport:9000(size=8) ioport:8c00(size=4) ioport:8880(size=8) ioport:8800(size=4) ioport:8480(size=16) ioport:8400(size=16)
*-serial UNCLAIMED
description: SMBus
product: 82801I (ICH9 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 02
width: 64 bits
clock: 33MHz
configuration: latency=0
resources: memory:fe7ff400-fe7ff4ff ioport:400(size=32)
*-ide:1
description: IDE interface
product: 82801I (ICH9 Family) 2 port SATA Controller [IDE mode]
vendor: Intel Corporation
physical id: 1f.5
bus info: pci@0000:00:1f.5
version: 02
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
resources: irq:22 ioport:a000(size=8) ioport:9c00(size=4) ioport:9880(size=8) ioport:9800(size=4) ioport:9480(size=16) ioport:9400(size=16)
*-scsi:0
physical id: 1
logical name: scsi2
capabilities: emulated
*-disk
description: ATA Disk
product: ST3320613AS
vendor: Seagate
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: SD22
serial: 9SZ08X1B
size: 298GiB (320GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=000b2224
*-volume:0
description: Windows NTFS volume
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
version: 3.1
serial: fe64-5abb
size: 348MiB
capacity: 350MiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2014-09-03 23:41:09 filesystem=ntfs label=System Reserved modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
*-volume:1
description: Windows NTFS volume
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
version: 3.1
serial: 525949d5-1b57-a842-b678-b84db82a9696
size: 148GiB
capacity: 148GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2014-09-03 23:57:20 filesystem=ntfs state=clean
*-volume:2
description: EXT4 volume
vendor: Linux
physical id: 3
bus info: scsi@2:0.0.0,3
logical name: /dev/sda3
version: 1.0
serial: df9ea610-2942-44f5-9d93-91fbff19cf63
size: 500MiB
capacity: 500MiB
capabilities: primary journaled extended_attributes huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2015-05-16 19:51:12 filesystem=ext4 lastmountpoint=/boot modified=2015-05-17 01:42:13 mounted=2015-05-17 00:31:11 state=clean
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@2:0.0.0,4
logical name: /dev/sda4
size: 148GiB
capacity: 148GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux filesystem partition
physical id: 5
logical name: /dev/sda5
capacity: 3906MiB
*-logicalvolume:1
description: Linux filesystem partition
physical id: 6
logical name: /dev/sda6
logical name: /boot
capacity: 3906MiB
capabilities: bootable
configuration: mount.fstype=ext4 mount.options=rw,relatime,data=ordered state=mounted
*-logicalvolume:2
description: Linux filesystem partition
physical id: 7
logical name: /dev/sda7
logical name: /
capacity: 141GiB
configuration: mount.fstype=ext4 mount.options=rw,relatime,data=ordered state=mounted
*-scsi:1
physical id: 2
logical name: scsi4
capabilities: emulated
*-cdrom
description: DVD-RAM writer
product: DRW-2014L1T
vendor: ASUS
physical id: 0.0.0
bus info: scsi@4:0.0.0
logical name: /dev/cdrom
logical name: /dev/sr0
version: 1.00
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
Last edited by nevinx (2015-05-22 19:35:33)

Before you responded I already installed mesa-vdpau and no errors:
mplayer
libavformat version 56.25.101 (internal)
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang und
VIDEO: [H264] 720x406 0bpp 23.976 fps 622.6 kbps (76.0 kbyte/s)
Clip info:
major_brand: isom
minor_version: 1
compatible_brands: isom
creation_time: 2015-05-22 01:29:13
Load subtitles in ./
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 56.26.100 (internal)
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, floatle, 119.5 kbit/3.89% (ratio: 14939->384000)
Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
Starting playback...
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
VO: [vdpau] 720x406 => 720x406 Planar YV12
A: 8.6 V: 8.6 A-V: 0.000 ct: 0.042 0/ 0 3% 1% 0.2% 0 0
vlc
cvlc something.mp4
VLC media player 2.2.1 Terry Pratchett (Weatherwax) (revision 2.2.1-0-ga425c42)
[00000000017594b8] dummy interface: using the dummy interface module...
[00007f1fe90973d8] avcodec decoder: Using G3DVL VDPAU Driver Shared Library version 1.0 for hardware decoding.
I run a 2 hour video file with mplayer and my pc is fully working. Now I will try vlc, chrome and popcorn
Edit: Everything is working again. So the solution was to install vdpau. Thank you Lone_Wolf!
Last edited by nevinx (2015-05-22 19:35:03)

Radeon 9800 SE upgrade to G4 (AGP graphics) - HELP!

Hi,
I recently upgraded my G4 to graphics card to a Radeon 9800. Everything seemed ok then I went to switch the resolution and I got a black screen with "Mode Not Supported". Normally when this happens, it automatically switched back to the previous resoultion and it's ok. But now it just sticks on the black screen with the error message floating around.
If I start in safe boot it's ok but if i try to start normally, it gives me the error.
Any suggestions? Please Help!
Thanks!
Mike

"I got a black screen with "Mode Not Supported"
"it just sticks on the black screen with the error message floating around."
That message is coming directly from your display. Starting in Safe Mode uses a simple and safe resolution. Change the resolution while in safe mode, but not to the one that went black!

ATI Radeon 9800 G4 & G5 Edition 256MB AGP Graphics Card

hi all is this graphics card fairly good to run FCS 2 on mainly FCP, and possibly colour, might also run aperture o it aswell, but i might stick to iphoto.
cos at the moment i a have the basic 64mb card that came with my g5 1.6ghz mac
just need abit of info quick as i found this card at a amazing price but dont know if i should save up for longer and get a x800 card for like £350 ish
ADAM

Hi-
The 9800 will give you quite a boost over your current card, but, of course, the x800 is more desireable. On a price vs. performance comparison, though , the 9800 will give you more bang for the buck.
The following are FCS system requirements:
http://www.apple.com/finalcutstudio/specs.html
Interesting discussion:
http://dvcreators.net/products/ati_radeon.html
As noted in the above link, if you are serious about FCS, the x800 is the more serious card.

Radeon HD 3870 fanless temp @ 110 deg.

This card isn't really from MSI, but the question is pretty general and you guys seem to know some
- My GPU goes up to 110 degrees C sometimes. Is that a problem?
The GFX is a silent one, so a bit higher temp is normal, but 110 degrees?! However, everything seams to be running just fine at that temp...
GFX: Sapphire Radeon HD 3870 Ultimate (fanless).
Edit: Typo in subject.

http://xtreview.com/addcomment-id-3883-view-Sapphire-Radeon-HD-3850-512-MB-Ultimate.html
by that its high
are you using same tool to read it

Changed Graphics Card ATI Radeon X1900 XT

i changed my graphics card from ati radeon 5770 hd to ATI Radeon X1900 XT, in mac pro 5,1 its showing only 7MB VRAM

From > http://www.everymac.com/systems/apple/mac_pro/faq/mac-pro-default-graphics-cards -dvi-dual-link-mini-displayport.html
Mac Pro Subfamily
Video Card Options
VRAM
Ports
Original
ATI Radeon X1900 XT
512 MB GDDR3
2 DL DVI
Mac Pro Subfamily
Default Video Card
VRAM
Ports
Mid-2010
ATI Radeon HD 5770
1 GB GDDR5
2 Mini DP
1 DL DVI
Mid-2012
ATI Radeon HD 5770
1 GB GDDR5
2 Mini DP
1 DL DVI
looks a little like a downgrade to me - the article doesn't really deal with downgrading to the 'original' MacPro (?wonderng why? - 5770 shot? and X1900 lying around?)
Never tried to downgrade... so I'm out.
ÇÇÇ

3D - New volume from layers

Hi everybody,
For my current project I need to use the "New volume from layers" function in the 3D menu.
However, this functions seems to be disabled. I've searched for a solution, and found that the hardware could be the cause...
My specs:
RAM: 1GB
GPU: Sapphire ATI Radeon HD3850 - 512 MB GDDR3 (AGP)
Do I have insufficient hardware resources for this function?
If so, is there by any change another way to enable it? I really need this function.
Unfortunately there's no better computer around that I can use...
Thanks in advance.
Kind Regards,
Thomas.

If you need drivers there are no ATI certified drivers made for that card anymore and the card is no longer supported.
I do not know what your OS is as you didn't post it. However, there is a hotfix for the 10.2 driver set. Not even sure if the 10.2 drivers will work on your card or system. It is up to you if you wish to download the 10.2 drivers and then the 10.2 hotfix. A soht in the dark if you ask me.
Best bet is to upgrade. But if you have AGP that is old hardware and motherboard. Some cards are still made for AGP so doing a search for one is a good bet too.
Anyways here is the link for ATI and the hotfix. Like I said you will have to download the 10.2 drivers first. But they may not work.
http://support.amd.com/us/kbarticles/Pages/CatalystAGPHotfix.aspx

2 beeps! help!

Hi, I'm apparently having a strange parity issue with my MSI K9A2 Platinum 790FX. When I boot the machine, I get two short beeps and then the computer boots up as normal. It seems to run with no problems, recognizes my 2 Gb of Ram, runs my applications and games fine. I just want to make sure I'm getting all the performance I can from my system.
I've tried reseating the ram, only one stick instead of two, and different slots. I've also flashed the bios and updated all the drivers.
System components:
MSI K9A2 Platinum 790FX motherboard
AMD Athlon 64 X2 3800+ processor
CORSAIR Dominator 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) (running at 800MHZ)
SAPPHIRE 100226L Radeon HD 3850 512MB 256-bit GDDR3 PCI Express 2.0 x16 Vid Card
If anyone has experienced this or has a suggestion to whats going on, it is appreciated.

well thats a relief Thanks!

MSI P45 Neo3 problem!

hello everyone...i've bought two weeks ago a Msi P45 Neo3 Motherboard...i have a intel dual core 2 duo 6420 @ 2.13 ghz...Ati radeon hd 3850 512/256...so far so good...the ram memory is a dual channel kit Kingston KVR1066D2N7K2/2G DDR2 and i think those are the problems!With one module it starts very well...it doesn't crashes , doesn't give BSOD,nothing...but when i put both modules in DUal Channel, windows just don;t want to boot...it gives errors,BSOD,i need to give ten restarts to boot and when i'm in explorer it crashes and restarts by himself!i tried to change the ram module and both works fine but singular not both same time!why i don't know...everyone told me to flash the bios with a recent update!if you tell me how to do and what version of bios to download i would be gratefull!My MB is Ver.1.0!please help me!
PS:Sorry for my english language!:D

Quote from: Svet on 14-February-11, 22:50:08
looks like there is a conflict with your system.. or the tool unable to detect it as msi board.
paste mainboard serial number
Elementul   Valoare
Atribute placa de baza
ID placa de baza   64-0100-009999-00101111-041509-Eaglelake$A7514200_A7514IMS V1.8 041509
Numele placii de baza   MSI P45 Neo3 v1.0 (MS-7514)
Atribute Front Side Bus
Tip bus   Intel AGTL+
Latime Bus   64 bit
Ceas real   267 MHz (QDR)
Ceas efectiv   1066 MHz
Largimea de banda   8532 MB/s
Caracteristici bus memorie
Tip bus   Dual DDR2 SDRAM
Latime Bus   128 bit
DRAM:rata FSB   16:8
Ceas real   533 MHz (DDR)
Ceas efectiv   1066 MHz
Largimea de banda   17064 MB/s
Caracteristici bus chipset
Tip bus   Intel Direct Media Interface
Informatii fizice placa de baza
Slot/socket procesor   1 LGA775
Sloturi extinse   4 PCI, 1 PCI-E x1, 1 PCI-E x16
Sloturi RAM   4 DDR2 DIMM
Dispozitive integrate   Audio, Gigabit LAN
Form Factor   ATX
Dimensiunea placii de baza   240 mm x 300 mm
Chipsetul placii de baza   P45
Caracteristici suplimentare   Dual CoreCell
Producator placa de baza
Nume firma   Micro-Star Int'l Co.,Ltd.
Informatii despre produs   http://www.msi.com/product/mb
Download BIOS   http://www.msi.com/service/download
Actualizare driver   http://www.aida64.com/driver-updates
Actualizari BIOS   http://www.aida64.com/bios-updates
AIDA Extrem edition showes to me those...i've tried to get bios from the site but did not managed:(...!

[SOLVED] Visualization problem in Libreoffice

Hi people... I am new with Arch and I am trying to setting up my new system.
I have installed lbreoffice-fresh but I am facing with this visualization problem:
Every time I click or move the mouse arrow over a button, these ghost square appear.
That's very boring...
Can you help me please?
Thank you
Last edited by cavalierejody (2014-12-28 10:38:05)

Thank you!
I am using Gnome.
I have:
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Radeon HD 7850 2GB GDDR5 DVI-I/DVI-D/HDMI/DP
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at f64c0000 (64-bit, non-prefetchable) [size=256K]
I/O ports at 8000 [size=256]
Expansion ROM at f64a0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
X.Org version: 1.16.3.
Last edited by cavalierejody (2014-12-27 01:20:48)

SAPPHIRE TECHNOLOGY RADEON HD 3850 512 MB GDDR3 AGP

Similar Messages

Maybe you are looking for