SapPhone Server Tester - SPS Tester
Hello friends,
I read about the SPS Tester on help.sap.com. I found also information about the installation of the SPS Tester, but where can I get this programm?
Does somebody know where I can get or download the SPS Tester?
daniel
Hi Team,
I am facing the same issue and I am using Oracle system user credentials to connect Oracle server and I have also installed extension pack for the SQL Server instance which i am using for migration. Still I am getting the following error in last step (Migrate
data).
Cannot connect to Oracle server via SQL Server tester extensions.
Oracle
10.2.0.4 verion
SQL Server 2012 SP1
SSMA 6.0
Please help me if you have gone through the same problem.
Thanks,
Vijaysqldb
Similar Messages
-
hi all
i am looking for a framework that simplifies coding tests to AAAU servers.
The main idea is to test not only load and performance but also the web server DB state.
In other words to check if the server is doing his job properly.
And the question is:
do you know of a tool, programing language or a framework in which you can add a simple script that will automate the server testing?
thanx in advance.Maybe you should post under advanced topics
-
Hi,
I have the following question, I am integrating a telephony server
(Avaya IP Office 403) with SAP. I am working whit SAPPhone server 2.5.9.
I am able to create a Site, Work center, Telephony Server, RFC User, RFC Destinations, and more; but when I start the SapPhone Server it doesnt work, it appear in the SapPhone Server Server start error it was impossible to start the selected server !. Please check the server configuration
The actual characteristic of my system:
- SAPphone RFC interface: 5.11ASP
- SAPphone Server 2.5.9
- SAP CRM R/3
- SAPGUI 6.40
- TAPI 2.0
In some cases the RFC test, also fail !!!
<b>Please let me know if you have any suggestion in order to solve the actual problem. Finally, please let me know the way to check that my SAP system is connected to the IP Office.</b>
Best regards,Hi Tony,
Thanks for your help
<b>Does IP Office communicate with TAPI. ?</b>
R/. Yes, I am able to answer a call (lineAnswer), hang up a call (lineDrop), and make a call (lineMakeCall) with a SoftPhone (both first-party and third-party TAPI control of telephony devices) that I developed.
<b>I have integrated Avaya several times using TSAPI and connectors from 3rd parties.?</b>
R/. Ive developed several applications using TAPI 2.x and some Basic Services of Full Telephony of TAPI 3.0. In my case I can control the telephony devices by means of TAPI 2.x developing the application on C++.NET or C#.NET.
Pd. I heard something about the SAP Connector and RFC, Could I need it ?
Best regards,
Ana Jimena Rodas. -
Sapphone server TAPI integration
Hi,
We want to do a connection between CTI system and SAPphone.
We´re going to use SAPphone server and integrate it with TAPI interface.
We have documentacion about it and it seems that we have only to configure the systems, not to develop any program.
Is it necessary to program an RFC or something like that from SAP or external software telephony?
Thanks.
Regards,
EstebanHi Esteban
Let me have some more info and I will help you.
Regards
Tony Mason -
While running the livecache server test a native sql error occures
We are using scm4.1 livecache 7.5.0 And every time we are running the livecache test program he is dumping
whith the following dump
patch level scm & scm_basis is 8
Runtime Errors DBIF_DSQL2_SQL_ERROR
Except. CX_SY_NATIVE_SQL_ERROR
Date and Time 31.10.2005 16:50:55
ShrtText
An SQL error occurred when executing Native SQL.
What happened?
Error 600 occurred in the current database connection "LCA".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
How to correct the error
Database error text........: "Work rolled back: DbpError -28814 in
APS_ORDER_CH"
Database error code .......: 600
Triggering SQL statement...: " ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? or'"
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"/SAPAPO/SAPLOM_PLANNING" or "/SAPAPO/LOM_PLANNINGU08"
"/SAPAPO/OM_ORDER_CHANGE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"/SAPAPO/OM_ORDER_CHANGE"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "bebruap2"
Network address.......... "195.213.49.227"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "BEBRUAP2"
Database type............ "MSSQL"
Database name............ "APD"
Database owner........... "apd"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 23 2005 00:00:49"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "87"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8176
EM....................... 24040336
Heap..................... 0
Page..................... 1687552
MM Used.................. 1516920
MM Free.................. 572032
SAP Release.............. "640"
User and Transaction
Client.............. 000
User................ "CGRAULS"
Language key........ "E"
Transaction......... "/SAPAPO/OM03 "
Program............. "/SAPAPO/SAPLOM_PLANNING"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/SAPAPO/SAPLOM_PLANNING" in
"/SAPAPO/OM_ORDER_CHANGE".
The main program was "/SAPAPO/OM_TB_FLOW_QUANTITY ".
The termination occurred in line 91 of the source code of the (Include)
program "/SAPAPO/LOM_PLANNINGU08"
of the source code of program "/SAPAPO/LOM_PLANNINGU08" (when calling the
editor 910).
Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
occurred in the
procedure "/SAPAPO/OM_ORDER_CHANGE" "(FUNCTION)" but was not handled locally,
not declared in the
RAISING clause of the procedure.
The procedure is in the program "/SAPAPO/SAPLOM_PLANNING ". Its source code
starts in line 5
of the (Include) program "/SAPAPO/LOM_PLANNING$08 ".
Source Code Extract
Line
SourceCde
61
is_gen_params-simversion
62
is_gen_params-dont_set_netchg_flag
63
space.
64
65
Kontrollstruktur IS_GET_CHANGED_OPTIONS anpassen.
66
IF NOT et_changed_orders IS REQUESTED.
67
is_get_changed_options-send_chg_top_order = gc_false.
68
ENDIF.
69
IF NOT et_changed_cap_reqs IS REQUESTED.
70
is_get_changed_options-send_chg_cap_req = gc_false.
71
ENDIF.
72
IF NOT et_changed_io_nodes IS REQUESTED.
73
is_get_changed_options-send_chg_ionode = gc_false.
74
ENDIF.
75
IF NOT et_changed_io_pp_nodes IS REQUESTED.
76
is_get_changed_options-send_chg_io_pp = gc_false.
77
ENDIF.
78
IF NOT et_changed_pegids IS REQUESTED.
79
is_get_changed_options-send_chg_pegid = gc_false.
80
ENDIF.
81
IF NOT et_deleted_fix_pegging IS REQUESTED.
82
is_get_changed_options-send_del_fix_peg = gc_false.
83
ENDIF.
84
start_function 'OM_ORDER_CHANGE'. "#EC *
85
Verbindung zum liveCache aufbauen
86
check_server.
87
connect_to_livecache.
88
COM-Routine zum Anlegen bzw. Überschreiben eines Zeitstrahls
89
90
EXEC sql.
>>>>>
execute procedure "APS_ORDER_CHANGE" (
92
in :ls_gen_com_params,
93
out :lv_rc,
94
in :et_rc,
95
in :it_order_method,
96
in :it_ordkeys,
97
in :it_ordmaps,
98
in :it_orders,
99
in :it_activities,
100
in :it_mode,
101
in :it_cap_reqs,
102
in :it_positions,
103
in :it_inputs,
104
in :it_outputs,
105
in :it_prodflow,
106
in :it_intern_constraints,
107
in :it_extern_constraints,
108
in :it_charact_val_acts,
109
in :it_charact_req_inpnode,
110
in :it_charact_val_outnode,
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Flow Quantity Test
SY-MSGTY
S
SY-MSGID
/SAPAPO/OM_TEST
SY-MSGNO
001
SY-MSGV1
Create transSim
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
3 FUNCTION /SAPAPO/SAPLOM_PLANNING /SAPAPO/LOM_PLANNINGU08 91
/SAPAPO/OM_ORDER_CHANGE
2 FORM /SAPAPO/OM_TB_FLOW_QUANTITY /SAPAPO/OM_TB_FLOW_QUANTITY 802
CHANGE_DATA
1 EVENT /SAPAPO/OM_TB_FLOW_QUANTITY /SAPAPO/OM_TB_FLOW_QUANTITY 11
START-OF-SELECTION
Chosen variables
Name
Val.
No. 3 Ty. FUNCTION
Name /SAPAPO/OM_ORDER_CHANGE
IS_ATP_INFO
01ATP0000001~CGRAULSXX##
334553333333744545455500
011400000001E37215C38800
000000000000000000000000
000000000000000000000000
IS_CONTROLPARAMETERS
霁က#ం̂⍱㔒鲔#####
2222222222222222222222001007190000022
0000000000000000000000100221240000100
0000000000000000000000910002390000000
0000000000000000000000700C335C000C000
IS_GEN_PARAMS
01PLV0000001~CGRAULS
3354533333337445454522222
010C60000001E37215C300000
0000000000000000000000000
0000000000000000000000000
IS_GET_CHANGED_OPTIONS
2222222
0000000
0000000
0000000
IT_ACTIVITIES
Table IT_274[1x256]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ACTIVITIES
Table reference: 41
TABH+ 0(20) = 5087FFDF00000000000000002900000012010000
TABH+ 20(20) = 0100000000010000FFFFFFFF0487000000290000
TABH+ 40( 8) = 10000000C1308000
store = 0x5087FFDF
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 41 (0x29000000)
label = 274 (0x12010000)
fill = 1 (0x01000000)
leng = 256 (0x00010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000205
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x180112E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 126 (0x7E000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CAP_REQS
Table IT_276[1x112]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_CAP_REQS
Table reference: 39
TABH+ 0(20) = 48BB06E000000000000000002700000014010000
TABH+ 20(20) = 0100000070000000FFFFFFFF04870000C0290000
TABH+ 40( 8) = 10000000C1308000
store = 0x48BB06E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 39 (0x27000000)
label = 276 (0x14010000)
fill = 1 (0x01000000)
leng = 112 (0x70000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000209
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x188D04E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 124 (0x7C000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CHARACT_REQ_INPNODE
Table IT_418[0x140]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_REQ_INPNODE
Table reference: 32
TABH+ 0(20) = 00000000000000000000000020000000A2010000
TABH+ 20(20) = 000000008C000000FFFFFFFF04870000301D0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 32 (0x20000000)
label = 418 (0xA2010000)
fill = 0 (0x00000000)
leng = 140 (0x8C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000142
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CHARACT_VAL_ACTS
Table IT_417[0x156]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_VAL_ACTS
Table reference: 50
TABH+ 0(20) = 00000000000000000000000032000000A1010000
TABH+ 20(20) = 000000009C000000FFFFFFFF04870000901D0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 50 (0x32000000)
label = 417 (0xA1010000)
fill = 0 (0x00000000)
leng = 156 (0x9C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000144
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CHARACT_VAL_OUTNODE
Table IT_419[0x156]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_VAL_OUTNODE
Table reference: 60
TABH+ 0(20) = 0000000000000000000000003C000000A3010000
TABH+ 20(20) = 000000009C000000FFFFFFFF04870000901D0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 60 (0x3C000000)
label = 419 (0xA3010000)
fill = 0 (0x00000000)
leng = 156 (0x9C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000144
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_EXTERN_CONSTRAINTS
Table IT_416[0x124]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_EXTERN_CONSTRAINTS
Table reference: 71
TABH+ 0(20) = 00000000000000000000000047000000A0010000
TABH+ 20(20) = 000000007C000000FFFFFFFF04870000E02A0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 71 (0x47000000)
label = 416 (0xA0010000)
fill = 0 (0x00000000)
leng = 124 (0x7C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000215
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_INPUTS
Table IT_278[1x420]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_INPUTS
Table reference: 63
TABH+ 0(20) = 087400E0C0E303E0000000003F00000016010000
TABH+ 20(20) = 01000000A4010000FFFFFFFF04870000202A0000
TABH+ 40( 8) = 10000000C1308000
store = 0x087400E0
ext1 = 0xC0E303E0
shmId = 0 (0x00000000)
id = 63 (0x3F000000)
label = 278 (0x16010000)
fill = 1 (0x01000000)
leng = 420 (0xA4010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000211
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x78DC11E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 123 (0x7B000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x2029FFDF
hsdir = 0x00000000
ext2 = 0x00000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_INTERN_CONSTRAINTS
Table IT_415[0x124]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_INTERN_CONSTRAINTS
Table reference: 49
TABH+ 0(20) = 000000000000000000000000310000009F010000
TABH+ 20(20) = 000000007C000000FFFFFFFF04870000E02A0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 49 (0x31000000)
label = 415 (0x9F010000)
fill = 0 (0x00000000)
leng = 124 (0x7C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000215
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_MODE
Table IT_275[1x164]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_MODES
Table reference: 52
TABH+ 0(20) = A03C00E000000000000000003400000013010000
TABH+ 20(20) = 01000000A4000000FFFFFFFF0487000060290000
TABH+ 40( 8) = 10000000C1308000
store = 0xA03C00E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 52 (0x34000000)
label = 275 (0x13010000)
fill = 1 (0x01000000)
leng = 164 (0xA4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000207
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC8F611E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 125 (0x7D000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_ORDERS
Table IT_293[1x320]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDERS1
Table reference: 47
TABH+ 0(20) = 20B403E000000000000000002F00000025010000
TABH+ 20(20) = 0100000040010000FFFFFFFF0400000030380000
TABH+ 40( 8) = 01000000C1308000
store = 0x20B403E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 47 (0x2F000000)
label = 293 (0x25010000)
fill = 1 (0x01000000)
leng = 320 (0x40010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000286
occu = 1 (0x01000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x9080FFDF
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 1 (0x01000000)
lineAlloc = 1 (0x01000000)
store_id = 130 (0x82000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_ORDER_METHOD
Table IT_268[2x62]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDER_METHOD
Table reference: 51
TABH+ 0(20) = 8882FFDF0000000000000000330000000C010000
TABH+ 20(20) = 020000003E000000FFFFFFFF04000000B0360000
TABH+ 40( 8) = 10000000C1248000
store = 0x8882FFDF
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 51 (0x33000000)
label = 268 (0x0C010000)
fill = 2 (0x02000000)
leng = 62 (0x3E000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000278
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0868FFDF
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 122 (0x7A000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_ORDKEYS
Table IT_271[1x332]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDKEYS
Table reference: 29
TABH+ 0(20) = 80E303E000000000000000001D0000000F010000
TABH+ 20(20) = 010000004C010000FFFFFFFF04870000E0270000
TABH+ 40( 8) = 10000000C1308000
store = 0x80E303E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 29 (0x1D000000)
label = 271 (0x0F010000)
fill = 1 (0x01000000)
leng = 332 (0x4C010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000199
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0Hi,
the error DbpError -28814 denotes that an object cannot be found.
Can you maybe tell me your exact liveCache version (incl. Build level) and LCA Build?
Additionally, please copy the relevant error information from the file (/sapdb/data/wrk/<SID>/)knldiag.err into this thread.
Which exact 'liveCache test program' are your referring to (which of the /SAPAPO/... transactions)?
Kind regards,
Roland -
HTTP error 500 on Content Server test (RSCMST), after CS migration.
Hello all,
I have migrated a Content Server 6.30 system from HP-UX and MaxDB 7.3.00.42 to CS 6.40 on Windows and MaxDB 7.7.06.15. While the migration of the database and the install of the CS 6.40 seems to have completed successfully, I am having trouble connecting to it from the R/3 system.
Following some clean up steps suggested by SAP support, I am able to connect to the CS system using the "serverInfo" query, and I am also able to connect to the existing repository through CSADMIN. However, when I run the RSCMST tests, they all fail with the error: HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0".
Below is a summary of the tests/connections that work and the ones that do not.
URL for serverInfo: http://<hostname>:1090/ContentServer/ContentServer.dll?serverInfo - Returns successfully and displays status of CS.
CSADMIN - All tabs on csadmin display correct information, from the CS and respository.
SE38 - program=RSCMST - All tests return the following error: HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
I have also confirmed that I am using the most recent ODBC driver on this CS(at the request of SAP support), with the command sdbregview -l. - Returns the following: ... ODBC g:/sapdb/programs 7.7.06.15 64 bit valid ...
If anyone has any suggestions on what else I can check for this error, I would greatly appreciate it. Thanks in advance.
Regards,
Rusty RobbinsWell, I have good news to report... finally!
The main problem I had with the 500 error was caused by an incorrect version of MaxDB, for CS 6.40 (as SAP support pointed out in the message I had opened with them). Once I had completed the migration using MaxDB 7.6.06.05, I was able to connect successfully.
When I first performed this migration (with 7.6.06.05), I "thought" I was still getting the same 500 - internal error, but after looking at it closer I realized that the error had changed to say something like "table is set to read-only". I then realized that I had forgotten to perform a full data backup, following the last import. Once I completed this backup, I was able to connect to this CS system from R/3, with all of the test programs (RSCMST, etc).
Just to be sure, I performed this migration from scratch again, and was able to repeat the successful migration and tests. I have now turned it over to the functional teams for testing, and hopefully they will not find any issues. ;p
Thanks to all that responded and to those that reviewed this post!
Regards,
Rusty Robbins -
Final cut server-Test Page for Apache installation comes up when IP put in
I have installed Final Cut Server on our Mac Pro Running OSX Leopard. Installation succeeded, but when I type in the IP address of the server in safari, the "Test Page for Apache Installation" comes up. This happens on every computer on the network. I need the client installation window to come in order to install the client. What am I missing, what settings need to be changed?
Would greatly appreciate some help.
ThanksSo when you type in the URL your using this format http://hostname/FinalCutServer, where hostname is the IP address or name of the computer on which you installed Final Cut Server? Especially the "FinalCutServer" part.
o| TonyTony |o -
SAP B2B server - test connection problem
Hi Team,
We have business connector 4.6 sap BC server. We have created adapter connection in sapbc server to establish a connection to SAP ECC system but when we perform test connection in sapbc server it is throwing out error as" Name or password is incorrect (repeat logon)" though we mentioned the right password and logon credentials.
Created listener for sap adapter in BC server and maintained program id and other configuration details. Created TCP/IP RFC connection from SAP using register program id "SAPBC and it is working fine.
communication from SAP to BC is working fine however we could receive error when we tried to test the connection from BC to SAP ECC.
Below are the BC Error trace for reference.
**** ERROR file opened at 20140702 192722 India Standard , SAP-REL 620,0,72 RFC-VER 3 480692 MT-SL
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [5] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [6] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [7] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [8] : returns 3:RFC_SYS_EXCEPTION
>TS> Wed Jul 02 19:55:59 2014
T:190 ======> Name or password is incorrect (repeat logon)
T:190 <* RfcReceive [9] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [10] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [11] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [12] : returns 3:RFC_SYS_EXCEPTION
Below are the system details:-
SAPBC – B2B web method integration server version 4.6 on windows NT system
SAP ECC Details - ECC 6.0, Oracle 10.2, HP Unix 11.31 (Unicode)
Please share if you have any clues on this.
Regards,
Ajay AsawaHi Deepak,
I have attache here the screenshot in first two part. Please check attachment
and also attach the error message
There is any change we have done recently in both system. B2B connected to our ECC production system
Regards,
Ajay Asawa -
How to up Oracle server test database
Before we have a oracle test server database The boot folder or location of this server is located at v240 and the drives are located at m4000. After server had been shutdown. We were unable to connect to the server thru ping, telnet and ssh. May I ask if there is a way to up the test server database. Kindly give us instruction on how to do it.
ThanksTry to connect to console through the ALOM interface and check the network interface.
-
Appllication Server Test Environment
We are in the process of purchasing Application Server. In the meantime while we are waiting for the purchase order to come through, we want to set up an environment for test. We do not have a legitimate copy of Application Server.
Would this be alight to install a bootleg copy until we get the legal copy.Also to answer your second part of the question, whatever you download from any of Oracle's site is a legit copy of the software, there are no as such "bootleg copy". The difference is license - do you hold license to use the product in your production env. or not. From the binaries side, all are fully functional packages.
Thanks
Shail -
Ive been asked to build a test harness.
A simple start would be this.
This will run on a machine and make multiple connections to a HTTP page and read the response given.
The aim of this is to check the server load before it fails.
Does anybody have any code that would enable this.
Does anybody know if it is more realistic to run a number of threads (to mimic people trying to log on) to make the connections or if the application should just try to make so many connections in the shortest period of time?
Would this approach really define the same mechanism as a lot of people trying to connect to the server at the same time?
Any help always apprechiated!!I can see that it has Web, FTP, JDBC, and JNDI tests. What I specifically want is a load test on a server.
I dont see that it can do this from reading the user guide.
I will go back and have a closer look.
If you know that it can do this then I must be missing something.
Thank you. -
Hi Guys
can you help me with the following?-
we have an Exchange migration project, so I will need to make changes on the firewall to allow the emails to be delivered on the new server.
having a different IP address on the new server, I will need to create a new NAT rule and access-lists.
the question is if I use port 25 for the new NAT rule it will remove the existing NAT rule which I dont want as the new mail server is still in the testing phase and I dont want to break the connection.
can you please advise how do I test this new server for email sending without removing old one?
I am using a CISCO881 router.
existing NAT rule is-
ip nat inside source static tcp 192.168.1.50 25 interface FastEthernet4 25
and the new server IP will be 192.168.1.100
ThanksHi Collin
no I have only one Public IP address.
just a question on top of the question-
what about if I create the new NAT rule with a different external port?
i.e.- ip nat inside source static tcp 192.168.1.100 25 interface FastEthernet4 25230
and then allow the port 25230 on the new server, will that work or I am talking non-sense?
Thanks -
Messaging server "testing" config directory instance
So I'm noticing a lot of binds and searches from Messaging to it's config DS instance and was just curious as to if there's a pattern? My production box seems to test anywhere from every minute to as long as 4 minutes apart, however a test box (at the same patch level as prod) it only tests every 10 minutes (or right along with msprobe). The prod box has the same configutil for msprobe so I can't figure out why the prod messaging is continuously doing this:
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=mail.domain.edu, ou=domain.edu, o=NetscapeRoot" method=128 version=2
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mail.domain.edu,ou=domain.edu,o=netscaperoot"
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mail.domain.edu,ou=domain.edu,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=1 msgId=2 - RESULT err=0 tag=101 nentries=39 etime=0
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=2 msgId=3 - UNBIND
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=2 msgId=-1 - closing - U1
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=-1 msgId=-1 - closed.
Sure there's a LOT more traffic to production than test, but I wasn't aware that it was traffic dependent. This is also a backend store - the two front ends we have which are config'd for MMP/MEM do not look for the config ds other than at startu/shutdown.
Version:
Sun Java(tm) System Messaging Server 6.2-7.05 (built Sep 5 2006)
libimta.so 6.2-7.05 (built 12:18:44, Sep 5 2006)
Is this typical? Is this configurable to stop it from checking so frequently/sporadically? Is this something I need to worry about?Hi,
will get stopped and restarted. When they get
restarted, they will query the config ldap. Has
nothing to do with msprobe, but does have to do with
the load on the system. the tcp server/clients live
for a number of hours, or number of connections. . .
This all changes with 6.3.In case you were wondering, version 6.3 of messaging server does away with the configuration directory, and stores the same settings locally. That is why Jay says it changes with 6.3.
Regards,
Shane. -
Is it possibleTable test & server test in Oracle ebs..?
Hello,
I want to do table test&Server response test in Oracle EBS forms but it is not supporting...
Any suggestion please..
Regards,
Srinivasuser1983888 wrote:
Hi,
Oracle Applications 11.0.3 (Oracle Financials) was implemented in our company and later in 2006 it was upgraded to 11.5.10 (with new implementation of Supply Chain Management Module - INV,OM and PO) and 2 months ago we upgraded it to 11.5.10.2+DB 11gR2.
I've been recommending to upgrade to R12 but the Finance Users are reluctant for an upgrade and of the opinion that the R12 has many bugs and there will be issues after upgrade to R12.
R12.1.x is a stable release that many customers (including Oracle themselves) have upgraded to.
Once of the consultant is of the opinion that its better to re-implement R12 instead of Upgrade. He also tells me that R12 does not have sub-accounting and sub-ledger and trial balance reports in AP.Since I am not a Functional Consultant I could not comment on this.
The Finance modules have been completely re-written and fucntionality had changed for the better. Re-implementation typically costs upto 3 times more than a upgrade. Re-implementation is not necessary if the business model and process have not changed. What are the consultants justifications for doing a re-implementation (other than making more money) ?
Please advice if there are any useful docs which address the upgrade to R12 issues which I can share with our consultant and users.
I am currently going thru +Upgrade Advisor: Oracle E-Business Suite Financials and Projects Upgrade from 11.5.10.2 to 12.1.3 and 12.1.2 [ID 256.1]+
Pl see the Docs referenced in MOS Doc 850008.1 (Interesting Documents Concerning E-Business Suite 11i to R12 Upgrades)
Rgds,
ThiruHTH
Srini -
Gurus:
I was told that I can check if X server is available or not from AOL Diagnostic Tools. Would you please tell me what is the nevigation? I got a partial screen shot says: APPS_FRAMEWORK_AGENT -> X Server Accessibility then the test result is : X Server is accessible. I am checking the Diagnostic Tools I have which is newer I think. Don't know from where to get to there.
Thank you for your help.I was told that I can check if X server is available or not from AOL Diagnostic Tools. Would you please tell me what is the nevigation? I got a partial screen shot says: APPS_FRAMEWORK_AGENT -> X Server Accessibility then the test result is : X Server is accessible. You already have the navigation path.
- Go to http://<hostname.domainname>:<port>/OA_HTML/jsp/fnd/aoljtest.jsp
- AOL/J Diagnostic Tests
- APPS_FRAMEWORK_AGENT
- X Server Accessibility
So, what exactly you are looking for?
Thanks,
Hussein
Maybe you are looking for
-
I recently updated my macbook pro to 10.7.5 and the option in Safari to empty cache is gone. Is this a glitch or is there some other way to empty cache?
-
Functions needed in Data Template for XML output
Hi , Are there any oracle functions like abs() available in data_template to be used as follows group name="listItem" source="Q2"> <element name="amount" value="abs(amount)"/> <element name="serialNumber" value="TXN_SERIAL_NO"/> I want the absolute v
-
I need some urgent help. I've made a .wft file in utf-8 format. this means that all characters takes up 2 bytes - but when I try to load this up - via WFLOAD - I get the "... Buffer too small..." How do I tell wfload to run "in utf-8" mode? BTW; is i
-
Datafiles sizes increased while importing
Dears, I need to import HR dump from database 1 into database 2. I knew how to do this but while importing, i faced some problems regarding to space issue in database 2. I had to stop importing to increase space. after i did this , i repeated importi
-
Creating Hierarchy in BW !!!
Hi Gurus, How can I create a hierachy with one person reports to two managers. my client has this scenario where One team member reports to two managers. I heard it is not possible. Please advise.!!!! Thanks, AC..