SAPPI 7.3 testing with SOAPUI

Hi
I have generated a WSDL from the SAP Integration builder for a service interface that will start a message flow.
I am using SOAPUI to test this but I get the error
  com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve inbound binding for the given P/S/A values
Am I missing any parts of this URL that was proposed by the SAP Integration builder when it built me the WSDL
" http://ABSDSAPPI01.mycompany.co.uk:50100/XISOAPAdapter/MessageServlet?version=3.0&Sender.Service=BC_AB_TESTHARNESS_B1&In… "

Hi Jonny
Please generate the WSDL from either sender agreement for classical configuration or from ICO.
Then used the WSDL in SOAP UI, it will work.

Similar Messages

  • Security token testing with soapUI

    Have anyone managed to test the tutorial:
    [url http://dev2dev.bea.com/pub/a/2006/04/securing-service-bus.html?page=1]Securing Services Using the ALSB with SoapUI ? We had a hard time calling the WS without BEA specific libraries, and ended up making our own policy without using policy:Sign.xml. Still we had to make our own testcode to make it work. Has anyone been able to use soapUI for this purpose? We see that the generatet soap message is very different from what we managed to find out using BEA libraries.

    Hi Jonny
    Please generate the WSDL from either sender agreement for classical configuration or from ICO.
    Then used the WSDL in SOAP UI, it will work.

  • ACE load balancing and testing using soapUI

    Hey, I am trying to crowd source a solution for this problem.
    A client is testing using soapUI to an application that is being load balanced via ACE. There are two webservers behind the VIP servicing the client request. When client tests, requests are timing out per the soapUI log. A packet capture was taken and it clearly shows that ACE is not forwarding the HTTP data back to the client. When client tests by bypassing the ACE load balancer, it works fine. But, there are other clients from other applications that are making successful connection to the load balanced application via the VIP.
    Question, is there any thing unique with making HTTP/XML based requests using soapUI? LB configuration is shown below:
    class-map match-all EAI_PWS_9083
      2 match virtual-address 10.5.68.29 tcp eq 9083
    serverfarm host EAI_PWS_9083
      description WebSphere Porduction
      failaction purge
      probe tcp9083
      rserver ESSWSPAPP01 9083
        inservice
      rserver ESSWSPAPP02 9083
        inservice
    policy-map type loadbalance first-match L7_POLICY_EAI_PWS_9083
      class class-default
        serverfarm EAI_PWS_9083
    policy-map multi-match L4SLBPOLICY
    class EAI_PWS_9083
        loadbalance vip inservice
        loadbalance policy L7_POLICY_EAI_PWS_9083
        loadbalance vip icmp-reply active
        appl-parameter http advanced-options CASE_PARAM
    parameter-map type http CASE_PARAM
      case-insensitive

    Hi,
    Your configuration looks fine. I am not familiar with soapUI but if it is like a normal TCP connection followed by HTTP requests, i don't see why this shouldn't work.
    Do you know if there is a difference while using soapUI and normal request using browser?
    Regards,
    Kanwal

  • SOAP : Testing with WebServiceStudio

    Hi All,
    My scenario is SOAP to RFC sync.
    I'm new in SOAP scenario. For testing purpose try to use "WebServiceStudio".
    Any one guide me how to test with the same?
    Thanks,
    Arthita

    Hi,
    For web service scenarios, better to use soapUI. Very user-friendly tool and easy to install.
    More information: http://www.soapui.org/
    Kind regards,
    Dimitri

  • Unit Testing with Microsoft Sharepoint Emulators and Fakes with Visual Studio 2013

    Hi All,
    I have created Test Project and now creating Test cases for Sharepoint. I found a link on MSDN which suggests using Fakes framework but it supports VS2012 and I am using Visual Studio 2013.
    So how can I use it with VS2013 or is there any other way with which I can implement the Test cases with VS2013.
    Please suggest.
    Thanks in advance.
    Himanshu Nigam

    Hi HimanshuNigam,
    According to your descrition, my understanding is that you want to use Fakes framework to create test case for SharePoint project in Visual Studio 2013.
    If you want to test using Fakes Framework, you can use the codeplex extension to achieve it. It supports Visual Studio 2013.
    Here is a detailed article for your reference:
    Better Unit Testing with Microsoft Fakes
    About how to include the Nuget package, you can use the package with the link below:
    NuGet Package Manager for Visual Studio 2013
    Installing NuGet
    If you still have question about this issue, I suggest you can create a post in Visual Studio, more experts will help you and you can get more detailed information from there:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • I am getting this error message when I open Safari.  How do I make it go away?  "Error Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(.  As a precaution, it has not been loaded.  ?

    Error
    When I launch Safari on my MacBook Pro
    Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(.  As a precaution, it has not been loaded.  Please contact the plugin developer for further information.
    I am getting this message when I open Safari.  How do I make it go away?
    Thanks, Ed Williams

    To Remove plug-in
    1.) Open the SplashID desktop app
    2.) Navigate from Menu bar "File" -> "Plugin for Safari" -> "Uninstall".
    I could not find it in either Library/Internet Plug-ins nor ~/Library/Internet Plug-ins as others have suggested.
    Cheers!

  • Load testing with concurrent users on HTTP Web

    Hello,
    I am trying to do load testing my PHP Web Application.
    I record (with Firefox) and developed the testing script with OpenScript,
    but I found that I could only test with "Iteration" feature.
    Is there any way to do load testing with concurrent users ( multi users login at the same time ) which defined in databank?
    Thanks for help.

    Hi
    You need to load the script into OLT (Oracle Load Testing) you can download it from here you need the first link Oracle Application Testing Suite and run the OATSxxx.exe to install OLT.
    Regards
    Alex

  • I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

    It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi,  it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)?  Any ideas on how to get iPad working with GPS only??

    Roger that.  Thanks for your time.
    System:
    Windows 7 64bit
    Processor: AMD phenom IIX4 965
    RAM:  Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
    GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
    PSU: Kingwin 1000W laser gold (LZG-1000)
    Yes. tried the one ram stick, no go.  I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install.  I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3.  Yes I can see the Vertex 3 Drive as well as the WD drive at this point.  some times I have to hit "scan" a couple of times.

  • How to stop an error message that pops up every time I open Safari. It reads...Safari 5.1 (v6534.50) has not been tested with the plugin PithHelmet .As a precaution, it has not been loaded. Please contact the plugin developer.

    How do I stop this error message from popping up every time I start up Safari ?
    Error message reads...
    Safari 5.1 (v6534.50) has not been tested with the plugin Pithhelmet 3.0b6 (v 3006)
    As a precaution, it has not been loaded. Please contact the plugin developer.
    I have removed every trace of Pithhelmet, (via spotlight)
    Trashed the preferences for Safari, restarted computer to no avail.
    It just  keeps keepin on.
    Thanks

    In the past I was able to bypass the message by editing the Info.plist file and updating the MaxBundleVersion variable, but not so this time around. As of today the developer seems to indicate there's no immediate fix becuase of how Safari 5.1 handles multiprocess page rendering. Probably best to stay tuned to Mike's website for now.

  • Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
    tracking down the cause of the flakiness can be tricky ... as you already know ...
    just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

  • HT204406 I am not able to download my files from iCloud to my iPad using iTunes Match, my internet connection is alive as I tested with Safari, I have enabled iTunes Match on and off to be usre is active..but still  cannot download....my music

    I am not able to download my files from iCloud to my iPad using iTunes Match, my internet connection is alive as I tested with Safari, I have enabled iTunes Match on and off to be usre is active..but still  cannot download....my music

    I have the same problem on my Windows 7 computer. In the right-click menu for a song one option is DELETE. However when I click that option the next window is to HIDE instead of DELETE. Apple, please help us with this.

  • Safari 7.0 (v9537.71) has not been tested with the plugin LastPass 1.75.0 (v1.75.0). As a precaution, it has not been loaded. Please contact the plugin developer for further information.

    I get the following message whenstarting Safari
    Safari 7.0 (v9537.71) has not been tested with the plugin LastPass 1.75.0 (v1.75.0). As a precaution, it has not been loaded. Please contact the plugin developer for further information.
    i have removed the plugin, but the message is still around
    and the last version i had installed was the most recent version of last pass VERSION 3.0.17
    anything i can do to fix that?
    thanx
    js

    Uninstall SIMBL as follows. Back up all data before making any changes.
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    /Library
    In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V), and press return. A folder will open. From that folder, delete the items listed below (some may be absent.) You may be prompted for your administrator login password.
    Application Support/SIMBL
    InputManagers/SIMBL
    LaunchAgents/net.culater.SIMBL.Agent.plist
    ScriptingAdditions/SIMBL.osax
    Log out and log back in.
    Make sure you never reinstall SIMBL. It’s likely to come bundled with another third-party system modfication that depends on it. If you want trouble-free computing, avoid software that makes miraculous changes to other software, especially built-in applications. The only real exception to that rule is Safari extensions, which are mostly safe, and are easy to get rid of when they don’t work. SIMBL and its dependents are not Safari extensions.

  • Connect. test with "dbmcli db_state"  --    Unsuccessful

    hello All,
    After a system copy, when I try to schedule de backups in DB13 i got the following error:
    DBM_GETF database instance not found
    If I test the connection with DB in the DB59 transaction the following is displayed:
    Connect. test with "dbmcli db_state"                         Unsuccessful
    How can I fix this issue?
    Thanks,
    Hernando
    Edited by: Hernando Polanía C on Oct 18, 2011 6:33 PM

    Hello Natalia,
    I run the connection test in Tx db59 and the result was:
    General Connection Data
       Connection Name....: PTC
       Database Name......: cobogsap01
       Database Server....: cobogsap01
       tp Profiles........: no_longer_used
       DBM User...........: CONTROL
       Test Scope
       1. Execute an external operating system command (DBMCLI)
       2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
       3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
       4. Test the SQL connection (Native SQL at CON_NAME)
    Application Server:  COBOGSAP01_PTC_00                        ( Windows NT )
       1. Connect. test with "dbmcli db_state"                         Unsuccessful
          dbmcli_command_execute_error
          Error! Connection failed to node cobogsap01 for database cobogsap01:
          database instance not found
          External program terminated with exit code 2
       2. Connect. test with command mode "dbmrfc db_state"            Unsuccessful
          dbm_system_error
          Name and Server     : cobogsap01 - cobogsap01
          DBMRFC Function     : DBM_EXECUTE
          Command             : db_state
          Error               : DBM Error
          Return Code         :         -4
          Error Message       : database instance not found
       3. Connect. test with session mode "dbmrfc db_state"            Unsuccessful
          dbm_system_error
          Name and Server     : cobogsap01 - cobogsap01
          DBMRFC Function     : DBM_CONNECT
          Error               : DBM Error
       Return Code         :         -4
       Error Message       : database instance not found
    4. Connect. test with "native SQL"  ( PTC )                     Unsuccessful
       For detailed information, see the developer trace for work process:           2
    the MaxDB version is 7.6.06.019
    Thanks for your help.
    Reagards,
    Hernando

  • Unit Tests with Jemmy

    I currently write some Unit Tests with jemmy. But i did not find a solution to run it headless. The test should run on a hudson build server and there is no X installed. Are there any solutions?
    cheers
    Andy

    Not presently, we have the same issue internally. I have a half-finished "Headless Glass" implementation would allow exactly this, but due to other (crucial and exciting) FX work I am doing at the moment, I haven't been able to finish this.

  • Xtext Unit tests with JUnitParam

    Hey,
    I do some testing with Xtext. Somehow I ended up with a lot of boilerplate code and would like to get rid of it by using JUnitParam. Both Xtext and JUnitParam require the use of @RunWith annotation.
    @RunWith(JUnitParamsRunner.class)
    @RunWith(XtextRunner)
    class MyDslValidationTest {
    // test code ...
    This will not work ... How do I get both to work ?
    Thank you.
    Kon

    Thank you Christian Just in case if someone else is having the same issue:
    import com.google.inject.Inject
    import junitparams.JUnitParamsRunner
    import junitparams.Parameters
    import org.eclipse.xtext.formatting.INodeModelFormatter
    import org.eclipse.xtext.formatting.impl.DefaultNodeModelFormatter
    import org.eclipse.xtext.junit4.util.ParseHelper
    import org.eclipse.xtext.resource.XtextResource
    import org.eclipse.xtext.util.Pair
    import org.eclipse.xtext.util.Tuples
    import org.junit.Before
    import org.junit.Test
    import org.junit.runner.RunWith
    import static extension org.assertj.core.api.Assertions.*
    @RunWith(JUnitParamsRunner)
    class TestFormatterTest {
    @Inject extension ParseHelper<Model> parseHelper = new ParseHelper
    @Inject extension INodeModelFormatter nodeModelFormatter = new DefaultNodeModelFormatter
    @Before
    def void before() {
    var i = new TestStandaloneSetup().createInjectorAndDoEMFRegistration
    i.injectMembers(parseHelper)
    i.injectMembers(nodeModelFormatter)
    @Test
    @Parameters
    def void testFormat(Pair<CharSequence, CharSequence> pair) {
    pair.first.assertFormattedAs(pair.second)
    def static parametersForTestFormat() {
    Tuples.create('''test { bla }''',
    '''test {
    bla
    def void assertFormattedAs(CharSequence input, CharSequence expected) {
    (input.parse.eResource as XtextResource).parseResult.rootNode.format(0, input.length).formattedText.assertThat.
    isEqualTo(expected)

Maybe you are looking for