SapRouter 1067

Hello Good afternoon, greetings to all
We have this problem, could someone help please SAProuter windows service does not work, short of sending the message windows 1067 unexpected error:
Activities:
-Revision of the host so if the ip and hostname
-Revision of services so if the ip and port 3299
-Revision dev_rout says:
trc file: "dev_rout", trc level: 1, release: "700"
Fri July 22 19:52:04 2011
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter.exe
command line arg 1:-r
main: pid = 5408, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a SAProuter)
routtab reading: '. / saprouttab'
ERROR => SNC field SNC Without active, skip line 3 [nirout.cpp 7775]
ERROR => SNC field SNC Without active, skip line 6 [nirout.cpp 7775]
ERROR => SNC field SNC Without active, skip line 7 [nirout.cpp 7775]
ERROR => SNC field SNC Without active, skip line 8 [nirout.cpp 7775]
ERROR => SNC field SNC Without active, skip line 9 [nirout.cpp 7775]
-Revision of saproutrab: (there are two lines that catch my attention) says:
Access from Iternet - R / 3 Frontend to local Network
P * 3299 194.39.131.34 suim780
and
SNC connection to local system for R/3-Support
KP "p: CN = sapserv2, OU = SAProuter, O = SAP, C = DE" # 3389 99.34.48.92 App26.mexinox.mx where ip app26 = 99.34.48.92 host server in question.
-Revision of string windows service properties:
e: \ usr \ SAProuter \ saprouter.exe service-r-W 60000-R e: \ usr \ SAProuter \ saprouttab-K "p: CN = app26.mexinox.mx, OU = 0001119592, OU = SAProuter, O = SAP , C = DE "
-Revision of log file in E: \ usr \ SAProuter
Mon Jun 27 11:03:45 2011 INIT LOGFILE
Mon Jun 27 11:03:45 2011 READ ROUTTAB. / Ok saprouttab
Mon Jun 27 11:52:53 2011 CONNECT FROM C1 / - host 99.34.55.188/3169 (app34.mexinox.mx)
Mon Jun 27 11:52:53 2011 PERM DENIED C1 / - host 99.34.55.188 (app34.mexinox.mx) to 194.39.131.34/sapdp99
Mon Jun 27 11:52:53 2011 DISCONNECT C1 / - host 99.34.55.188/3169 (app34.mexinox.mx)
Mon Jun 27 11:52:53 2011 CONNECT FROM C1 / - host 99.34.55.188/3170 (app34.mexinox.mx)
Mon Jun 27 11:52:53 2011 PERM DENIED C1 / - host 99.34.55.188 (app34.mexinox.mx) to 194.39.131.34/sapdp99
Mon Jun 27 11:52:53 2011 DISCONNECT C1 / - host 99.34.55.188/3170 (app34.mexinox.mx)
Mon Jun 27 11:52:53 2011 CONNECT FROM C1 / - host 99.34.55.188/3171 (app34.mexinox.mx)
Mon Jun 27 11:52:53 2011 PERM DENIED C1 / - host 99.34.55.188 (app34.mexinox.mx) to 194.39.131.34/sapdp99
-Revision of the lift command line says:
dev_route trcfile
active nologiin
routtab can not open '. / sapouttab': exit program! (Not before the exit Arcab this program!)
the last error is this:
E:\usr\saprouter>saprouter -n
Wed Aug 03 11:15:53 2011
SAP Network Interface Router, Version 36.15
Wed Aug 03 11:15:54 2011
***LOG Q0I=> NiPConnect2: SO_ERROR (10061: WSAECONNREFUSED: Connection refused)
[ninti.c 979]
ERROR => NiRAdmin: NiBufConnect (rc=-10) [nixxrout.c   3843]
ERROR       partner not reached (host localhost, service 3299)
TIME        Wed Aug 03 11:15:54 2011
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -10
MODULE      ninti.c
LINE        979
DETAIL      NiPConnect2
SYSTEM CALL SO_ERROR
ERRNO       10061
ERRNO TEXT  WSAECONNREFUSED: Connection refused
COUNTER     1
E:\usr\saprouter>
'We think it's a port problem because the service and remove and re-created on Windows and it works.
Anyone have any other comment please thank you very much for your help everyone.
tnaks

This sounds like the application and not networking. Did you download the right version for your OS?
2008r2 is only 64bit I believe, looking at the download site..you got 3 options..you got the right one..
file is saprouter_617-20010469.sar right?
I guess if it was 32 bit, server would complain during installation.
take a look at this http://scn.sap.com/thread/768187
100% sure about your system variable?

Similar Messages

  • SAPRouter service is not starting Error:1067

         Hi All,
    I Installed a Sap Router on windows2008R2 with SNC,
    For installation i followed all the steps shown in below link
    SAProuter via SNC - Basis Corner - SCN Wiki  But when i am trying to  start the SAProuter service in the services it is not starting.
    I tried to start the SAPRouter from the command prompt then it is working fine and i checked the OSS1 connection also it's working fine.
    Error showing while starting the router service is :
    Error 1067:the process terminated unexpectedly
    and i checked the log in Event Viewer also it is saying as :
    The description for Event ID 1 from source SAPRouter cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    Please give your valuable suggestion to overcome the error.
    Thanks&Regards,
    Praveen.

    This sounds like the application and not networking. Did you download the right version for your OS?
    2008r2 is only 64bit I believe, looking at the download site..you got 3 options..you got the right one..
    file is saprouter_617-20010469.sar right?
    I guess if it was 32 bit, server would complain during installation.
    take a look at this http://scn.sap.com/thread/768187
    100% sure about your system variable?

  • Not able to start Saprouter from services.msc

    Hi,
    We have installed a saprouter into Windows 2003 Server. It is running fine. When we start the system then we need to manually start the saprouter by a batch file, so i am trying to register a service so that we need not to start the router manually.
    i have read the note 525751 and install a new service by this command
    ntscmgr install saprouter -b c:\saprouter\saprouter.exe -p "service -r -W 60000 -R c:\saprouter\saprouttab -K "p:CN=SAPROUTER, OU=0000835750, OU=SAProuter, O=SAP, C=DE""
    Service successfully created. I have followed the note and done everything as per the note, but when i try to start the service i am getting this error  couldnot start saprouter service on local computer, error 1067 process terminated unexpectedly
    When i checked the event log i found this message.
    RROR       Unable to load the GSS-API DLL
                 named "sncgss32.dll"
    TIME        Tue Oct 06 16:30:17 2009
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     5
    RC          -17
    MODULE      sncxxdl.c
    LINE        342
    DETAIL      SncPDLInit
    SYSTEM CALL LoadLibrary
    COUNTER     1
    I have checked some thread on related to issue but not able to solve the problem. Could you please assist what's wrong.
    Regards,
    Subhash

    >
    Tomas Gustafsson wrote:
    > I'm sorry to put a silly question here, but this message is a little bit hard to get the grip on:
    > Do you use the same user for both the command prompt and the service?
    Yes I understand it's frustrating now., and Yes i am using the same user srvsolmgr to run from Services.msc and from command prompt also.
    > Also
    > Can you please post the command which runs successfulll (from the command prompt)
    > and the complete command for the saprouter-service.
    C:\>cd saprouter
    C:\saprouter>saprouter -r -G log.txt -R C:\saprouter\saprouttab -S 3299 -K "p:CN
    =SAPROUTER, OU=0000835750, OU=SAProuter, O=SAP, C=DE"
    trcfile  dev_rout
    logfile  log.txt
    Connection test OK
    u Oct 08 16:03:56 2009
    SAP Network Interface Router, Version 37.11
    command line arg 0:     saprouter
    command line arg 1:     -r
    command line arg 2:     -G
    command line arg 3:     log.txt
    command line arg 4:     -R
    command line arg 5:     C:\saprouter\saprouttab
    command line arg 6:     -S
    command line arg 7:     3299
    command line arg 8:     -K
    command line arg 9:     p:CN=SAPROUTER, OU=0000835750, OU=SAProuter, O=SAP, C=DE
    SncInit(): Initializing Secure Network Communication (SNC)
          PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
    SncInit(): Trying environment variable SNC_LIB as a
          gssapi library name: "C:\saprouter\sapcrypto.dll".
      File "C:\saprouter\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
      The internal Adapter for the loaded GSS-API mechanism identifies as:
      Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
    main(): pid = 2776, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a SAProuter)
    reading routtab: C:\saprouter\saprouttab
    Regards,
    Subhash

  • SAProuter Service Is Not Starting

    Hi,
    I have installed saprouter on my end.service is created sucessfully.
    when i am start saprouter service its given me
    error SAProuter Service Is Not Starting locally error 1067.
    I am tried to start this service windows administrator as well sncadm.its give me same error.
    Regards
    Amol

    Hi Amol,
    Read,
    Re: SAPROUTER
    http://sap.ittoolbox.com/documents/popular-q-and-a/saprouter-service-is-not-starting-4447
    regards
    Juan
    PS: Hi Abinash,
    GREAT COPY AND PASTE JOB...!

  • Error 1067: when trying to update Adobe Acrobat 9 Pro

    I have Adobe Acrobat 9 Pro and have been using it for over 3 years. I Changed computers and uninstalled it from my first and then reinstalled it in my new, but have run into a problem that I cannot find an answer to, nor can I get any help from Adobe.
    I will be notified that there are updates available and I will select yes to update the program, but after 20-30 second, a new window will pop up stating:
    Update Failed
    The process terminated unexpectedly.
    Error: 1067
    Details   (http://helpx.adobe.com/acrobat/kb/update-errors-acrobat-reader-windows.html)
    From there, I will click on the Details link and be sent to an Adobe page telling me:
    Try downloading Reader directly from this page.
    This link sends me to a page to download the latest version of Adobe Reader (http://get.adobe.com/reader/direct/), so, I will make all of the selections, download it, install it, restart my computer, but when I open Acrobat 9 Pro and try to run the update again, nothing changes and I receive the same error message.
    Now, I go to try and get some help from Adobe, but am just sent here to see if I can find out any other information because they "no longer" help with Acrobat 9 Pro(?).
    Does anyone have any answer on what I can do to fix this or why this is happening? I've never had any problems with this program before. It just all started when I changed computers, and this one is a brand new computer, so no bugs or anything. I installed Photoshop CS5, Illustrator CS5 and InDesign CS5 without any problems and they all updated without a problem.
    I'm not sure how important the updating really is, but it makes me feel better, knowing that any changes or problems with the program can get "fixed" with these updates.
    Thank You,
    Sean

    Not that it is going to ease the testing of your patience at all to suggest you try somewhere else, but there is a forum dedicated to Acrobat Installation and Update Issues that might have some info or people ready and able to help you:
    http://forums.adobe.com/community/acrobat/installation_and_update_installation?view=discus sions

  • Configurar saprouter para aceitar conexoes de fora

    Olha sei que este topico ja foi aberto mas volto a pedir um suporte. Preciso me conectar ao meu SAP de casa, tenho no meu saprouttab o seguinte:
    # SNC connection to and from SAP
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
    # SNC connection to local system for R/3-Support
    # R/3 Server: 192.168.1.1
    # R/3 Instance: 00
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.1.15 3200
    # SNC connection to local WINDOWS system for WTS, if applicable
    # Windows server: 192.168.1.2
    # Default WTS port: 3389
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.1.15 3389
    # SNC connection to local UNIX system for SAPtelnet, if applicable
    # UNIX server: 192.168.1.3
    # Default Telnet port: 23
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.1.15 23
    # SNC connection to local Portal system for URL access, if applicable
    # Portal server: 192.168.1.4
    # Port number: 50003
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.1.15 50003
    # Access from the local Network to SAP
    P 10.1.1.15 194.39.131.34 3299
    # Permitir todas as redes temporariamente
    P * * *
    # deny all other connections
    D * * *
    Ja coloquei no meu SAPGui a seguinte string:
    /H/<IP PUBLICO DA FIREWALL>/S/3299/H/
    IP - 10.1.1.15 = IP Do servidor de SAPRouter que é o mesmo Servidor que correr o SAP ECC 6.
    So que mesmo assim nao consigo conectar-me, o que estará errado aqui.
    cumprimentos.

    Bom dia!
    Estou tentando configurar o SAP ROUTER para possbilitar conexões a partir de uma rede externa. Entretanto, sem sucesso. Agradeço toda ajuda!
    # inbound connections MUST use SNC
    # yyy --> SAP ROUTER DA EMPRESA QUE IRÁ ACESSAR O MEU SAP VIA SAP ROUTER.
    # ECC --> SERVIDOR ECC 6
    # SOL --> SERVIDOR SOLMAN
    # SRM --> SERVIDOR SRM
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"  YYY.YYY.YYY.YYY   *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" ECC.ECC.ECC.ECC 3200
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" ECC.ECC.ECC.ECC *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" ECC.ECC.ECC.ECC 3300
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" ECC.ECC.ECC.ECC 3600
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SOL.SOL.SOL.SOL 3200
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SOL.SOL.SOL.SOL *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SOL.SOL.SOL.SOL 3300
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SOL.SOL.SOL.SOL 3600
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SRM.SRM.SRM.SRM 3600
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SRM.SRM.SRM.SRM 3300
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" SRM.SRM.SRM.SRM *
    # outbound connections to <sapservX> will use SNC --
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"  YYY.YYY.YYY.YYY *
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"  YYY.YYY.YYY.YYY 3200
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"  YYY.YYY.YYY.YYY 3298
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"  YYY.YYY.YYY.YYY 3299
    # permission entries ONLY ECC
    P ECC.ECC.ECC.ECC YYY.YYY.YYY.YYY 3200
    P ECC.ECC.ECC.ECC YYY.YYY.YYY.YYY *
    P ECC.ECC.ECC.ECC YYY.YYY.YYY.YYY 3299
    P ECC.ECC.ECC.ECC YYY.YYY.YYY.YYY 3389
    # all other connections will be denied
    D  * * *

  • SAPRouter set up in Solman 7.1 sr1 release

    Dear All,
    we completed the installation Of Solman Server 7.1.  Now we are in the process of activity "Configuration Of SOlman Server ".
    RFC Destination SAP OSS not working. Connection and Authorization test for SAPOSS is failing with "Connection Error "
    Connection test of RFC Destination ( SAPOSS)  is failing with below error:
    Logon Connection Error
    Error Details Error when opening an RFC connection (LB: Hostname or service of the message ser
    Error Details ERROR: partner '147.204.2.5:sapdp99' not reached
    Error Details LOCATION: SAP-Server solmantrg_SMI_01 on host solmantrg (wp 2)
    Error Details DETAIL: NiPConnect2: 147.204.2.5:3299
    Error Details CALL: connect
    Error Details COMPONENT: NI (network interface)
    Error Details COUNTER: 27
    Error Details ERROR NUMBER: 79
    Error Details ERROR TEXT: Connection refused
    Error Details MODULE: nixxi.cpp
    Error Details LINE: 3286
    Error Details RETURN CODE: -10
    Error Details SUBRC: 0
    Error Details RELEASE: 720
    Error Details TIME: Fri Apr 25 13:04:19 2014
    Error Details VERSION: 40
    Authorization Test Of RFC Destination ( SAPOSS) IS FAILING WITH below error
    Logon Connection Error
    Error Details Error when opening an RFC connection (LB: Hostname or service of the message ser
    Error Details ERROR: partner '147.204.2.5:sapdp99' not reached
    Error Details LOCATION: SAP-Server solmantrg_SMI_01 on host solmantrg (wp 2)
    Error Details DETAIL: NiPConnect2: 147.204.2.5:3299
    Error Details CALL: connect
    Error Details COMPONENT: NI (network interface)
    Error Details COUNTER: 34
    Error Details ERROR NUMBER: 79
    Error Details ERROR TEXT: Connection refused
    Error Details MODULE: nixxi.cpp
    Error Details LINE: 3286
    Error Details RETURN CODE: -10
    Error Details SUBRC: 0
    Error Details RELEASE: 720
    Error Details TIME: Fri Apr 25 13:05:37 2014
    Error Details VERSION: 40
    In OSS1, parameter of the technical setting is attached. Please check attached screenshot for more details on the error
    Please tel how to maintain OSS1 details and help to fix the RFC error of destination SAPOSS
    Regards,
    Gayathri.K

    Gayathri,
    Is your SAProuter installed on the same server as Solution Manager, or on another server?  Since you said this was all working before when you were using SolMan 4.0, you must have already had a saprouter registered with SAP.  Do you still have that SolMan 4.0 system?  Or did you wipe it out before doing the fresh install of SolMan 7.1?
    The SAProuter will have two IP addresses:  an 'external' one that you have registered with SAP, and an 'internal' one that is on your company's private network.  That internal IP address needs to be set up in OSS1 technical settings as the address of your "SAProuter at Customer Site".  In your screenshot, you had these fields blank, and as Shkelzen pointed out, this isn't going to work until you fill that in:
    Regards,
    Matt

  • Difference between the way of login with ip address and SAProuter when checkin original file

    Hi, experts
    We found out:
    ① Login with ip address, check in a file with file name less than 22 Chinese character, OK.
    ② Login with ip address, check in a file with file name more than 22 Chinese character, error message 26253 appeares: Error while checking in and storing: &
    ③ Login with SAProuter, check in a file with file name more than 22 Chinese character, OK.
    What casues error in condition ②? The only difference between ② and ③ is the way of logining to SAP system.
    Best Regards
    Yemi

    Hi Yemi,
    based on your description I would kindly ask you to check the application log transaction SLG1 after getting the error message with your userID. Here normally further background information is listed that might help to get a hint what is going wrong.
    Best regards,
    Christoph

  • Error while migrating to Flex 4.5.1 (1067: Implicit coercion of a value...)

    I am getting the following error while migrating my application from Flex 3.6 to Flex 4.5.1:
    1067: Implicit coercion of a value of type __AS3__.vec:Vector.<Object> to an unrelated type Array.
    The error is thrown on the following piece of code:
    var list:ArrayCollection=new ArrayCollection(dgSoftwareTitles.selectedItems);
    dgSoftwareTitles is defined as:
    <s:DataGrid id="dgShareCategoryForTransfer"
    x="34"
    y="369"
    requestedRowCount="5"
    width="90%"
    selectedIndex="-1"
    selectionMode="multipleRows">
    <s:columns>
    <s:ArrayList>
    <s:GridColumn headerText="SoftwareTitle"
    dataField="idSoftware"
    visible="false"/>
    <s:GridColumn headerText="SoftwareName"
    dataField="softwareName"
    visible="false"/>
    ...more GridColumns
    </s:columns>
    </s:ArrayList>
    </s:DataGrid>
    Any ideas why this would trow the "1067: Implicit coercion of a value of type __AS3__.vec:Vector.<Object> to an unrelated type Array" error?
    Thanks!
    Lee

    I think that dgSoftwareTitles.selectedItems is a type of Vector while
    public function ArrayCollection(source:Array = null) expects an array as a source.

  • Saprouter:wildcard character error

    Hi people,
    I stopped the saprouter and when I try to start other time I have the next error message:
    WARNING: Wildcard character used in route target
    What can i do?

    I push a # in the two lines for the documented them and try to execute saprouter.exe -r and the next message are:
    command line arg 0:     saprouter.exe
    command line arg 1:     -r
    main(): pid = 6084, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a SAProuter)
    reading routtab: ./saprouttab
    ERROR => SNC field without SNC active, skip line 2 [nirout.cpp   7806]
    ERROR => SNC field without SNC active, skip line 5 [nirout.cpp   7806]
    ERROR => SNC field without SNC active, skip line 9 [nirout.cpp   7806]
    ERROR => SNC field without SNC active, skip line 13 [nirout.cpp   7806]
    Now I have configured the OSS1 with the note 96655, and when I try to logon on the system I have the error message:
    Unable to connect to message server.
    Edited by: David Esquivel on Sep 19, 2008 3:11 PM

  • Apple Mobile Device service is not started error 1067

    Apple Mobile Device service is not started error 1067 in Windows 7.

    Thanks Ryan Sensei. I followed your link. Though I didn't have any Megaupload software installed on my computer, I saw a related article on http://senseiphone.com/fix-apple-mobile-device-not-started_itunes-0315129/ which was my actual problem and fixed it perfectly. 

  • I'm being told my start up disc is full on my 2010 macbook. Memory is 2GB 1067 MHz; and Finder tells me I have 1.05 GB still available.  Do I need a bigger hard drive?

    I'm getting error message that my start up disc is full on my 2010 macbook.  Started with 2GB 1067 MHz; and, according to Finder, still have 1.05 GB available.  Any idea what's up?  I had MacKeeper dump all junk files.  Do I need a new hard drive?

    First of all I would suggest you get rid of MacKeeper, which is well known in the Mac community to be useless or in some cases to be as bad as malware. Read this user tip by Klaus1.
    The startup disk (your hard drive) is not the same as the system memory (the 2GB of RAM you describe.) You may very well need a larger hard drive, but the first thing I would try would be looking through your downloads folder for old installer disk images, deleting any that you do not need any more (usually all of them) and emptying your trash. Many users put files in their trash and forget to empty it.
    If that doesn't gain you sufficient space, you may want to replace your hard drive with a larger model. You don't mention what size drive you have, but it is possible to do it yourself. See page 37 of this user manual.
    Another option would be to put files that are taking up a large amount of space (often iTunes and iPhoto Libraries fall into this category) on an external hard drive. This works best if you do not need portability.
    Best of luck.

  • How much ram can I add to my late 2008 MacBook Pro? I run Mavericks and just got a new inexpensive hard drive. RAM is not very expensive so Thought I would bump it up from the current 2MB of 1067 Mhz DDr3

    How much ram can I add to my late 2008 MacBook Pro? I run Mavericks and just got a new inexpensive hard drive. RAM is not very expensive so Thought I would bump it up from the current 2MB of 1067 Mhz DDr3

    Maximum Memory
    8.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • Steps to restore contacts from either iPhone 4 or G drive slim.  Macbk 2.26 GHz, 2 Duo, 4 B 1067 MHz DDR3 with 291 GB avail storage out of 499 GB.

    Please provide the steps to restore contacts to my Macbook 2.26 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3, OS X 10.9.5.
    I have back up G mini drive and iPhone 4.
    Thanks,
    Tracy

    Inactive memory is your file system cache.
    The cache is trying to save you from expensive disk I/O (where expensive means in time and battery life).  Running that disk a lot drains your battery faster, and it is orders of magnitude slower than data already in RAM.  Unused RAM is a waste of money.
    Is your system running slow?  If so, then start looking at all those 3rd party additions you have loaded.
    Do you really need "2" virtual machines?  VirtualBox and Parallels?
    As mentioned above, get rid of the anti-virus software.  It is just eating system resources.
    Do you need MacFUSE.  It has been responsible for performance issues for some users (all of which may depend on what kind of file system format you are trying access).
    Do you need to run your own Samba server?
    You have OpenVPN and TunnelBrick.  Are they both needed?

  • How to install the SAPRouter service on a Windows 2003 Server?

    Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
    This is fairly urgent so your assistance here would be much appreciated.
    Many thanks
    Sharon

    I tried this and I get the following error...
    'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
    Any further suggestions?
    S

Maybe you are looking for

  • How can I share a gift card on multiple devices under the same Apple id

    how can I use the same gift card on multiple devices using the same Apple ID?

  • Can I run windows vista under lion boot camp?

    I have an older install disk for windows vista that I need to install on my mac mini running lion.  I tried to do it under the bootcamp install but it froze most of the way through it.  Will this work? or does it have to be W7 only?  Lastly, is there

  • Sapscript: How to combine two elements into a block when display ?

    /E  ITEM_CONDITIONS /:   PROTECT ZC &KOMVD-VTEXT&,,&KOMVD-KWERT& /:   ENDPROTECT /E  TOTAL_AMOUNT_ITEMS /:   PROTECT ZC &KOMK-SUPOS& /:   ENDPROTECT Hi, all. May i know how to combine the two elements into a same block when displaying? That's mean th

  • Please read this iTunes Devs.

    For the love of God, it's impossible to find a direct feedback link on the site for iTunes, so I'm posting it here in prayer of a dev actually reading it. /end mini-rant I would like to have iTunes show me a column that simply displays a "Yes" or a "

  • Video chapter markers not showing in iTunes

    I used Metadata Hootenanny to add chapter markers in a movie. When I play the movie through Quicktime it shows the pop-up chapter selector, but when i import the movie into iTunes and play it through iTunes, the controls don't show the chapter marker