SAPROUTER - how to check if SAP is logging in ?

Hi,
after i have created a message and opened connection for SAP in Marketplace, while waiting for their reply on the solution, is there any log i can check to verify that they have connected or are connecting to my system via saprouter ?
i know a way to check is to check the logon status of the ID we provided to them, other than this what else can we check ?
comment and advice will be highly appreciated.
thanks.
regards,
kent

karan & ashutosh's answers are the approach of checking the logon status in application or at OS level which i already know, anyway thanks for your suggestion.
vamshi, well, logbook is a good place to check the status of the logon which i didn't make use of last time. i just did and found that it isn't that accurate also. because today SAP had problem logging in to my system via telnet 5250 connection, just now i checked the log, the status it shows "Log on" but actually they didn't manage to logon. later when i restart my saprouter and asked them to retry to logon, they manage to logon, and the logbook status also shows "Log on". one thing good about this logbook is it does show me the name of the SAP support who logged on.
sergo, yup this is the way, it shows the time when it connects and when it disconnects, it shows the IP from SAP and the IP of my server that they are accessing. i had activated the log from below link, now only know how to make use of it.
http://help.sap.com/saphelp_47x200/helpdata/en/4f/992ed3446d11d189700000e8322d00/frameset.htm
well, with the log from both the Logbook (marketplace) and saprouter i can tell WHEN and WHO logins to my system via saprouter.
thanks all.
regards,
Kent

Similar Messages

  • Java mapping how to use com.sap.tc.logging

    Hi I would like to know how to use logging within a java mapping.
    I know i have to use theese classes : Location, Category, ConsoleLog but i dont know how.
    1) How to load the P1, P2, P3 and P4 tags in the Error tag of the SOAP header watched in SXMB_MONI
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">STREAM_TRANSFORMATION_EX</SAP:Code>
      <SAP:P1>SwissMedical/Interfaces/IFI002/LiquidacionMapping~</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Java mapping of application triggered an exception</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    2) How to load and activate log in the DIAGNOSTIC tag of the SOAP Header.
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    Thanks!!

    As already suggested, you can display custom messages using AbstractTrace.
    trace = (AbstractTrace)param.get( StreamTransformationConstants.MAPPING_TRACE );
                        trace.addInfo("G1-CYCLE is missing");
    For more on coding front refer:
    http://help.sap.com/javadocs/NW04/current/pi/com/sap/aii/mapping/api/StreamTransformation.html
    To get this trace seen in MONI, set parameter TRACE_LEVEL in SXMB_ADM to 2.

  • How to check if SAP hangs

    When your SAP hang or user cannot logon, is there any standard process or best practice for checking.
    For instance, you need to check if the DB is up, any free space in oraarch, if SAP can connect to DB, if all processes are ocupied....

    Hi Fu Yi Chen
    As you already mentioned, when the system is hanging, i check:
    - are the SAP processes are running?
    - can i connect to the DB (for example with R3trans -x)
    - i check the tracefiles (dev_wX and dev_disp) in the work directory for errors
    - then i use the dpmon tool to check, what is running on the processes, you can stop a blocking process there, if you see it
    Regards
    Michael

  • How to check Exchange smtp relay logs successed/failed

    We have a quite a few servers in the company that allow to relay smtp through our current Exchange environment. Often time, the recipients did not get those messages that was send out from our SQLservers. We would like to get these logs from Exchange to see
    why those messages were sent from SQLservers that did not go through. Is there a way to track those messages?

    Hi ThaiFL,
    Any updates?
    Frank Wang
    TechNet Community Support

  • How to check BO Log an Bo configuration

    Post Author: Srividya
    CA Forum: Deployment
    How to check whether the BO log is enabled? As we are very new to BO, can you please tell us the steps to check the same.
    Can you tell us the steps to get BO Configuration details from server.

    Cmnghellmann,
    I don't even know if it's in the database, there's certainly no
    supported way to access it if it exists
    Shaun Pond

  • How to find where the user logged in to SAP

    Dear All,
    Our client is using SAP 8.8. He is using Citrix. When he logged in, it says user already login. I login to SAP by manager and I saw his user is gray out. That means this user logged in from some where.
    Their IT person said he has no session on Citrix server and he is the only user use that login (nobody share the ID with him). I checked SQL activity monitor, it cannot tell which use login from where. It just say SQL user (they all use the same SQL user). Any idea? They don't want to restart their SQL service. Thanks in advance.
    Regards,
    Yuka

    Thanks for the answer Gordon. Can you let me know how to check the user login in either SP_who2 or SQL management studio? In activity monitor, I see everybody has the same login (SQL user and password).
    Regards,
    Yuka

  • How to check SAP Component version and what is the latest patch installed

    Hi Experts,
    Can you please tell me that how to check SAP Component version and what is the latest patch installed.
    Thanks

    there are 2 easy ways
    1) log on to SAp System, on menu bar, slect system > Status...
    2) log on to system URL and click on system Status...
    Thanks,
    Prasant K Paichha

  • How to check ip address of concurrent SAP users?

    Hi All,
    I can check the host name of concurrent user at MS SQL Server Management Studio 2005 \ Management \ SQL Server Logs \ Activity Monitor
    Anybody knows how to check the ip address of SAP concurrent users?
    Thanks in Advance,
    Vivian Chan

    You may try run SP_who2 under you query manager to see.
    Thanks,
    Gordon

  • How to check connection from SAP to reservation system?

    Dear Experts,
    May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
    Thanks.

    Hi
    You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
    For more information, see Technical Prerequisites for Travel Planning--
    Technical Prerequisites for Travel Planning
    Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
    Connection to an External Reservation System
    The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
    u2022 Availability query of travel services
    u2022 Transfer of additional information about selected travel services
    u2022 Price information
    u2022 Processing of reservation by the respective provider
    u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
    In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
    In order to carry out online booking via AMADEUS the following must have been carried out:
    u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
    u2022 A network connection to the AMADEUS computer center must have been opened
    u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    For questions about registration, contact the SAP & AMADEUS Competence Center:
    SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
    Cheers
    Mukta

  • How to check the current EHP stack level? in SAP

    Dear All,
    How to check the current EHP stack level? in SAP  . i have checked forum before i am posting but still comfused .
    same one said SAP_APPL , EA_Appl  and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
    some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
    Pls check the details and confirm either is ehp1 or ehp4 .
    Component version is simply shows SAP ECC 6.0 in system -> status.
    Software Component  - Release  - SP level
    SAP_ABA     701     0007
    SAP_BASIS     701     0007
    PI_BASIS     701     0007
    ST-PI     2008_1_700     0003
    SAP_BS_FND     701     0008
    SAP_BW     701     0007
    SAP_AP     700     0021
    WEBCUIF     700     0008
    SAP_APPL     604     0008
    SAP_HR     604     0029
    SAP_HRCAR     604     0029
    SAP_HRCAT     604     0029
    SAP_HRCAU     604     0029
    SAP_HRCBE     604     0029
    SAP_HRCBR     604     0029
    SAP_HRCCA     604     0029
    SAP_HRCCH     604     0029
    SAP_HRCCL     604     0029
    SAP_HRCCN     604     0029
    SAP_HRCDE     604     0029
    SAP_HRCDK     604     0029
    SAP_HRCES     604     0029
    SAP_HRCFI     604     0029
    SAP_HRCFR     604     0029
    SAP_HRCGB     604     0031
    SAP_HRCHK     604     0029
    SAP_HRCID     604     0029
    SAP_HRCIE     604     0029
    SAP_HRCIN     604     0029
    SAP_HRCIT     604     0029
    SAP_HRCJP     604     0029
    SAP_HRCKR     604     0029
    SAP_HRCMX     604     0029
    SAP_HRCMY     604     0029
    SAP_HRCNL     604     0029
    SAP_HRCNO     604     0029
    SAP_HRCNZ     604     0029
    SAP_HRCPH     604     0029
    SAP_HRCPT     604     0029
    SAP_HRCRU     604     0029
    SAP_HRCSE     604     0029
    SAP_HRCSG     604     0029
    SAP_HRCTH     604     0029
    SAP_HRCTW     604     0029
    SAP_HRCUN     604     0029
    SAP_HRCUS     604     0029
    SAP_HRCVE     604     0029
    SAP_HRCZA     604     0029
    SAP_HRGXX     604     0029
    SAP_HRRXX     604     0029
    EA-IPPE     400     0018
    EA-APPL     604     0008
    EA-DFPS     600     0018
    EA-FINSERV     604     0007
    EA-GLTRADE     604     0008
    EA-HR     604     0029
    EA-HRCAR     604     0029
    EA-HRCAT     604     0029
    EA-HRCAU     604     0029
    EA-HRCBE     604     0029
    EA-HRCBR     604     0029
    EA-HRCCA     604     0029
    EA-HRCCH     604     0029
    EA-HRCCN     604     0029
    EA-HRCDE     604     0029
    EA-HRCDK     604     0029
    EA-HRCES     604     0029
    EA-HRCFI     604     0029
    EA-HRCFR     604     0029
    EA-HRCGB     604     0029
    EA-HRCHK     604     0029
    EA-HRCID     604     0029
    EA-HRCIE     604     0029
    EA-HRCIN     604     0029
    EA-HRCIT     604     0029
    EA-HRCJP     604     0029
    EA-HRCKR     604     0029
    EA-HRCMX     604     0029
    EA-HRCMY     604     0029
    EA-HRCNL     604     0029
    EA-HRCNO     604     0029
    EA-HRCNZ     604     0029
    EA-HRCPH     604     0029
    EA-HRCPT     604     0029
    EA-HRCRU     604     0029
    EA-HRCSE     604     0029
    EA-HRCSG     604     0029
    EA-HRCTH     604     0029
    EA-HRCTW     604     0029
    EA-HRCUN     604     0029
    EA-HRCUS     604     0029
    EA-HRCVE     604     0029
    EA-HRCZA     604     0029
    EA-HRGXX     604     0029
    EA-HRRXX     604     0029
    EA-PS     604     0007
    EA-RETAIL     604     0007
    FINBASIS     604     0008
    ECC-DIMP     600     0018
    ERECRUIT     604     0008
    FI-CA     604     0008
    FI-CAX     604     0007
    INSURANCE     600     0018
    IS-CWM     600     0018
    IS-H     600     0024
    IS-M     600     0018
    IS-OIL     600     0018
    IS-PS-CA     604     0007
    IS-UT     600     0018
    LSOFE     600     0018
    SEM-BW     604     0008
    ST-A/PI     01M_ECC600     0001
    Regards
    Edited by: satheesh0812 on Nov 17, 2011 7:57 AM

    Hi Sateesh,
    SAP_ABA 701 0007
    SAP_BASIS 701 0007
    PI_BASIS 701 0007
    ST-PI 2008_1_700 0003
    SAP_BS_FND 701 0008
    SAP_BW 701 0007
    SAP_AP 700 0021
    WEBCUIF 700 0008
    SAP_APPL 604 0008
    Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
    EHP4 is derived from your component SAP_APPL 604.
    In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
    Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
    Hope this answers your query.
    Regards,
    Deepak Kori

  • How to check ..the user who is currently logged in ..

    ... suppose i m logged in as HR schema ...so while using SLLplus * environment ...how to check ...that which use is currently logged in..

    If you want to use the name in some program then you can use
    select user into :variable from dual;
    Regards
    Kaustubh

  • How to check whether calendar is being used in any of the sap application

    Hello All,
    We are having few factory calendars. However some of the calendar having valid to year 2010. Can you please let me know how to check whether these calendar is being used in any of the sap application/module
    kindly reply as early as possible
    Regards
    Girish

    Hi RKS
    yesterday BLOG by our SUMMER WANG helps every SRM consultant to debug the PO error
    /people/summer.wang/blog/2010/05/11/trouble-shooting-of-srm-po-transfer-error
    Good work Summer wang !!
    Muthu

  • How to check ,how many  users are logged in and logged out in oracle ebs 11i/R12.

    Hi Experts,
    Kindly let me know
    how to check ,how many  users are logged in and logged out in oracle ebs 11i/R12.
    Also, in the database level too ,Do we need to write any trigger for this?
    Thanks in advance.

    Hi,
    How to check ,how many  users are logged in and logged out in oracle ebs 11i/R12.
    Please check the following links:
    Oracle EBS - Number of Users logged into EBS / Oracle Applications currently
    List all users currently logged in on Oracle EBS
    Also see forum Search:
    Forum Search: Logged In EBS User
    Also, in the database level too
    Please see:
    https://forums.oracle.com/message/9225094#9225094
    Do we need to write any trigger for this?
    Yes you may, But I personally suggest you not to do so as it may affect performance.
    Thanks &
    Best Regards,

  • How to check last log backup happend in sql server

    Hi All,
    How to check last log backup happend in sql server
    Thanks in advance
    Shashikala

    Last Tlog Bakcup details
    SELECT
       CONVERT(CHAR(100), SERVERPROPERTY('Servername')) AS Server,
       msdb.dbo.backupset.database_name,
       MAX(msdb.dbo.backupset.backup_finish_date) AS last_db_backup_date
    FROM   msdb.dbo.backupmediafamily
       INNER JOIN msdb.dbo.backupset ON msdb.dbo.backupmediafamily.media_set_id = msdb.dbo.backupset.media_set_id
    WHERE  msdb..backupset.type = 'L'
    GROUP BY
       msdb.dbo.backupset.database_name
    ORDER BY
       msdb.dbo.backupset.database_name
    --Most Recent Database Backup FULL for Each Database
    SELECT 
       CONVERT(CHAR(100), SERVERPROPERTY('Servername')) AS Server,
       msdb.dbo.backupset.database_name, 
       MAX(msdb.dbo.backupset.backup_finish_date) AS last_db_backup_date
    FROM   msdb.dbo.backupmediafamily 
       INNER JOIN msdb.dbo.backupset ON msdb.dbo.backupmediafamily.media_set_id = msdb.dbo.backupset.media_set_id 
    WHERE  msdb..backupset.type = 'D'
    GROUP BY
       msdb.dbo.backupset.database_name 
    ORDER BY 
       msdb.dbo.backupset.database_name
    http://www.mssqltips.com/sqlservertip/1601/script-to-retrieve-sql-server-database-backup-history-and-no-backups/
    Database -- > Right click -- > Properties -- >
    Raju Rasagounder Sr MSSQL DBA

  • How to do performance check in SAP-BI

    please help me in giving information inorder to check the performance check

    Hi,
    There are number of things that you need to check:
    1) Check whether SAP note 830576 is implemented for database tuning or not.
    2) Check status of Buffer and heap memory in ST02
    3) Check response time in ST03n.
    4) Check how much background work processes are allocated.
    Thanks
    Sunny

Maybe you are looking for