Sapscript - box not works

Hi,
I have a Sapscript and I use box to make borders.
I´m printing in a Laser printer and it´s works but in Epson LQ-1070 it doesn´t.
This problem was solved once by basis but now there no basis here to help me.
I tryed some configurations on SPAD and diden´t work.
Thanks in advance.
Best regards,
Marcelo Perine

Execute TCODE : SPAD.
go to outputdevices tab.
press output device button .
press button 'create using templete' by selecting the default printer .now in your 'SPOOL ADMINISTRATION OUTPUT DEVICE ' define your EPSON Printer into device type(take care of nos of pins as more than one epson printers might be available.so determine the pins in your printer ,printer model and select the appropriart printer).
SAVE IT and use this name instead of original one .your printout will be directed to epson printer.
reward if it helps

Similar Messages

Captivate 4 AS2 Text Entry Box not working with Flash Player 11

I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?

You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
I believe if you switch back to version 9 while publish your project, it should work.
Thanks,
Anjaneai

CISCO Box not working with Infrared Remove Control Repeater

There was an Infrared Remote Control Repeater set-up in my newly purchased house. It works for my LG DVD player, but does not work with my CISCO CHS435HDB box. Are there any work around for this? Should I change to a different box?

If you are using a repeater, make sure the piece that is relaying the IR signal is pointing directly the font of the Cisco box and nothing is plugged into the IR input port in the back of the box.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Text Entry Box not working right??

This is strange…. If anyone has any thoughts…
that would be great.
I have a slide that tests someone's knowledge for inputting
into a text entry box. I want to give them 2 tries for doing this
task - and if they don't perform the task correctly, I want an
error message to display. However, I want the error message to be
different based on the 1st time that they try and the second time.
The method to accomplish this.. I have done many times, and has
always worked. However, for some reason, it's not working this
time.
In order to customize the error message based on whether it's
the 1st try or the second - I have created 2 text entry boxes.
The first text entry box is set to display at 0 seconds, is
set to display for 2 seconds and is set to pause after 1.5 seconds.
If the user enters a successful text entry the user will be
navigated to the next slide, if the user enters an incorrect text
entry they will continue on the same slide and a failure caption is
selected to display (this is the first error message that displays
for the first try.)
The second text entry box is set to display at 2 seconds, is
set to display for 2 seconds and is set to pause after 1.5 seconds.
If the user enters a successful text entry the user will be
navigated to the next slide, if the user enters an incorrect text
entry they will continue on the same slide. No failure caption is
selected to display. This is the important point... I have not
selected for a failure caption to display for this text entry box.
I have a text caption that displays at 4 seconds - this is
the second error message that the user will see if they input an
incorrect text entry into the second text entry box.
Everything seems to work fine except... for some reason, when
I enter an incorrect text entry into the second text entry box, I
get the failure message that I set for the first text entry box.???
Very strange. I have recreated this 3 times - each time it works.
Then, all of a sudden, it stops working. I’ve even tried
recreating the movie from scratch… but same results.
Any thoughts?
Thanks,
Lynn

Hi again
Okay, makes sense. I suppose in this case, I'd simply use
another slide. From what you have explained, it would appear there
is a possible issue Captivate is having with multiple text entry
boxes on the same slide.
So I would insert a slide following the existing slide. Then
on failure of the first text entry box, direct to the next slide.
On success of the first text entry box, skip over the new slide to
the proper "continue" slide.
Hopefully that makes sense... Rick

Box not working, told must wait 12 days for engine...

I have a very old BT Vision box and over the last few weeks it's been slowing dying. At least three times it completely erased all the recordings saved. We would re-set it to factory settings and just carry on using it, but after about a week it would wipe the memory again.
I called the helpline to report the issue last week and the call agent was rude and patronising. I explained the issue but he seemed to not understand me. He asked 'Does it not allow you to record or does it not let you watch the recording?'. I said, again, it does neither of those things, it works mostly fine but occasionally wipes the entire memory. He tried again, this time speaking loudly and slowly as if to a particularly difficult child, 'No, does it not let you record, or does it not let you watch the recordings?'. I explained again, and he then asked me to reset the box. I explained, again, that I'd already done this several times and he said: 'Well that's why you've lost your recording then'. After another 5 minutes of going around in circles (and re-setting the box once more) he went away for quite a while and then came back and asked if the recordings that had been deleted had had an exclamation mark next to them. I ended up hanging up on him.
Anyway, I no longer have the option of ignoring the issue because the thing is obviously on its last legs. It has since stopped and started mid-way through recording things (and then deleted them several hours later), frozen several times whilst on both BBC iPlayer and ordinary television, and made strange grinding noises.
I phoned again today and was told that they couldn't send me a new box, but rather I would have to have an engineer. This seems a waste of time given how ancient the box is but I said ok. They then told me the first date the engineer could get out was 28/12. I said I thought this was disgusting but was told there was nothing sooner. I know it's only television, but not having a working TV over Christmas is a real inconvenience and really not what you expect when you're paying this much money.

BBbox wrote:
Not quite the reply I had hoped for, but I see where you are coming from. However, we are now singed up to a 12 month contract. The trouble is that where we are now living the broadband can't come via sky without coming down the bt line hence going over to bt. Does talk talk do the tv as well?
Stalk Stalk? Ohh err! NOT!
When you say its (the box) stopped working, do you mean you get just a blank screen? Not even Freeview?
Rank - Mostly Harmless.

Search box not working in Web site

Anybody knows why the search box at the following address is not working? Type any word in there, even if it is contained several times in the blog, and you will get no result.
http://tinyurl.com/6s4gcr
I have been trying for months to get an answer from Apple, without success. The MobileMe people say it is an iWeb problem. And the iWeb people say it is a MobileMe problem.
The problem was there with iWeb 2 and is still there with iWeb 3.
And please do not tell me to republish entirely the site. It has been done already several times, including on a MobileMe test server.

Bernard ~ +"A lot of problems can be solved simply by..."+ Read more in the "Fix iWeb" section here:
http://www.iwebformusicians.com/WebMusic/iWebTips.html

Video preview box not working

The video preview box is blank and does not work with downloaded videos. Tried deleting com.apple.iMovie8.plist and running disk Utility to repair disk permissions, but did not work.
Thanks for any suggested fixes.

richardj15,
Try restarting your Mac and seeing if that resolves the issue. If that doesn't work, go to the menu bar and choose Apple > Software Update... . There may be an important iMovie update you've missed.
Hope this helps,
O.C.

Selection box not working

i was asked to edit some code
one of the selection boxes wasnt working and was not updating
the db at all
here is the code snippet

<CFFunction name = "Sel_SpecifiedDateFlag" output =
"false" returntype = "string" access = "public">

<CFArgument name = "prm_SelID" required = "true">
<CFSet res1 = "">

<cfset id = 8>
<CFQuery name = "query1" datasource = "#APP_DB_DSN#">
select code , COALESCE(code::text,'') || ':' ||
COALESCE(name,'') as name
from tblpmdsetcomblist
where valid_flag = 1
and id = #id#
order by sort,code
</CFQuery>
<CFQuery name = "query2" datasource = "#APP_DB_DSN#">
select code from tblpmdsetcomblist
where valid_flag = 1
and id = #id#
and default_flag = 1
</CFQuery>

<CFIf query2.RecordCount NEQ 1>
<CFReturn "<font
color='red'><strong>リストテーブルデフォルトエラー</strong></font>">
</CFIf>

<CFIf prm_SelID eq "">
<CFSet prm_SelID = #query2.code#>
</CFIf>
<CFLoop Query="query1">
<CFSet res1 = res1 & "<OPTION Value='#code#'">
<CFIf Compare(code , prm_SelID) eq 0>
<CFSet res1 = res1 & " SELECTED">
</CfIf>
<CFSet res1 = res1 & ">">
<CFSet res1 = res1 & #name#>
<CFSet res1 = res1 & "</OPTION>#chr(10)#">
</CFLoop>
<CFReturn res1>
</CfFunction>

<CFInvoke Component="component.selbox"
Method="Sel_Plusoneflag" ReturnVariable="getstr">
<CFInvokeArgument name="prm_SelID"
Value="#plus_one_flag#">
</CFInvoke>
<select name="plus_one_flag" Size=1>
<CFOutput>#getstr#</CFOutput>
</select>

<select name="plus_one_flag" Size=1>
<OPTION Value='0'
SELECTED>0:プラフワン不可</OPTION>
<OPTION
Value='1'>1:プワスワン可</OPTION>
</select>
i checked all the sources of the problem which are obvious to
me but found none :(
btw the ascii characters in the code are japanese characters
if youre not seeing them properly

in the code you posted there is no code for updating the
db...
plus:
>
> <CFQuery name = "query1" datasource =
"#APP_DB_DSN#">
> select code , COALESCE(code::text,'') || ':' ||
COALESCE(name,'') as name
> from tblpmdsetcomblist
> where valid_flag = 1
> and id = #id#
> order by sort,code
> </CFQuery>
there is no 'sort' column pulled from the db or aliased by
that name as
it appears in the order by clause in the query above...
> 
>
> <CFInvoke Component="component.selbox"
Method="Sel_Plusoneflag"
> ReturnVariable="getstr">
you did not post any code for the 'Sel_Plusoneflag' function
in your
cfc... did you post a wrong function or should you change the
method's
name in the cfinvoke?
>
> i checked all the sources of the problem which are
obvious to me but found
> none :(
and what's the actual problem you are facing? the select box
still not
working (HOW is it not working? - not displaying/displaying
wrong data?)
or something else?
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

Breakout box not working

b? Hi. I have both a li've platinum and an audigy platinum. The card bit works fine, but no matter which one I use in my PC, I cant get the front box to work.
I think I've forgotten to connect something important. There's an IDE style cable running from the front box to the sound card, and the game port link (from the box in the li've, from the card in the audigy) and there's a bit that connects the card to the CD player, but there's also a bit on both front boxes with 4 gold spikes in a row. I think I should connect this to something. Is it for power? or data? or is it irrelevent?
I found a cable on a completely different sound card with 4 holes in a row that fits this connection. The other end also has 4 holes that look a bit closer together. I can't find anywhere on the soundcard for it to go. Does it connect to the motherboard maybe?
Anyway, can anyone help? I just got myself a guitar and some effects, and I can't use them.

What it was was that there is a bit of plastic the seperates the pins of the floppy disk power connection at the end of the PCB (part of the sound card). It had slid forward and was not allowing the power connector to attatch fully.
I just pushed the plastic bit all the way back and then put the connector on and it worked.
Happy days.
Cheers
C

Quantity Box not working

When I check the part -> details -> "quantity box" for a product line master part, it does not work correctly when I add to cart. I just get qty of 1 instead of the qty I put in. It works fine with non-product line master parts. It this supposed to work?

Hi Stephen
This should actually be hidden and this is the bug. The idea behind PLM's is they are a representation of an array of items that get added to the cart. I can see how this is confusing.
Take a look at the partdetail.aspx file and find the line that intanciates the prodlineblock control
<asp:Content ContentPlaceHolderID="prodlinegrid" ID="plgblock" runat="server">
<np:ProdLineBlock ID="prodLine" runat="server" Visible="False" ShowPartType="False" ShowPartNo="True" ShowInventory="False"
ShowPrice="True" ShowThumbnail="True" ShowAddToCart="True" ShowQuantity="False"></np:ProdLineBlock>
</asp:Content>
Set the ShowQuantity="True"
This will show a quantity text box for each child.

Webkit select box not working...

Hi folks,
I'm trying to create a simple select box in an air application, and while the select box is populated, it will not drop down. It just flashes and then rolls back up.
The select box on the following simple page fails:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
        <title>Untitled Document</title>
    </head>
    <body>
        <select name="myselect" id="myselect">
            <option value="1">1</option>
            <option value="2">2</option>
            <option value="3">3</option>
        </select>
    </body>
</html>
What is the trick to getting these select boxes to work properly in webkit? I can use my arrow keys to traverse up and down the options in the select list, but that's not really good enough. I want it to work properly.
Any ideas what the heck is going on?
Thanks,
Chris

Okay, I've got an update on this problem.
Just to test this against another platform that uses the webkit engine, I tried the following code in Safari 4.0.4 for Windows:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
        <title>Untitled Document</title>
    </head>
    <body>
        <select name="myselect" id="myselect">
            <option value="1">1</option>
            <option value="2">2</option>
            <option value="3">3</option>
        </select>
    </body>
</html>
... and even though the select box isn't inside a proper form tag, the code still works just fine. In fact, I tested the following code too:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
        <title>Untitled Document</title>
    </head>
    <body>
        <form name="myselect">
            <select name="myselect" id="myselect">
                <option value="1">1</option>
                <option value="2">2</option>
                <option value="3">3</option>
            </select>
        </form>
    </body>
</html>
... and this ALSO works perfectly fine.
However the same simple code fails miserably in AIR 1.5. Does anyone have a clue why that is? Again, should I upgrade to AIR 2.0 beta? A google search for problems with webkit and select boxes has returned nothing helpful. I'll check this forum again, but so far I've not gotten anything helpful here either.
Is nobody using AIR with straight HTML/JavaScript/AJAX? Is that why no one has been able to help me? Is *everybody* using Flex? I'm getting a bit frustrated at this point.

Broken Footer & Sign In Box Not Working...

Hello again, Dreamweaver Support Board, it's been awhile. I have a new problem that I'm dealing with on a new site that I am setting up. I have a feeling the solution is this is very simple, but I'm just not seeing it...
This is a site that has been worked on alot before I took up the job of cleaning up the html coding and constructing a new design layout and template for it... So far so good, but I do have a long ways to go until this thing is in tip top and organized shape...
My issue today is that the footer on the page of memberscorner.htm is broken, detached from the side bar on the left:
http://restorationacpc.com/memberscorner.htm
Also on that page, I cannot seem to get the login box to work. I transfered over everything (or so I thought) from the old coding to see if I could reconstruct it, but when testing it and putting in the account & password it does nothing at all. The same issue is happening on the ilogin.htm:
http://restorationacpc.com/ilogin.htm
Is there something I'm getting wrong in the html that is making this so it cannot function?
Here is the home address link to my test page for this site:
http://restorationacpc.com/

Oh, wow, you're mixing some strange layout elements here, tables with nested <div> tags using fixed positioning.
Move the footer div out of the table for starters.
That will allow you to position it correctly. Keep in mind, width:100% means "100% of the parent element". If you want the footer to be 100% of the browser window, you need to move it outside of anything else with a pixel width setting.
I think that will likely get you to where you want to be with that particular element.
You have a bunch of errors in your html that are causing problems...
http://validator.w3.org
Some big ones are you have multiple links that go to your hard drive, not to a file on the web. They'll appear to work locally, but will not work online for anyone who doesn't have those files in those locations on their machine.
Verify you have a Site Definition set up correctly...
http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/
Without that crucial first step, you're going to have many, many more problems to come.
As for the form, you have no <form> tag, which is generally used to send the information to a script or email address. If that exists in the original page, you definitely need to add that in.

Captivate 7 - Multiple Click Boxes not working

I would really appreciate some help on this. I've been reading the forums and it looks like this pops up again and again. I've tried some of the solutions, but I can't seem to make it work.
I have a slide with 8 click boxes on it. I would like for the user to click on box and then get a definition in the form of a text box. I'd like for them to be able to click on 1 box or all the boxes before they move on. I'd like for them to choose to move on with a "Continue" button that goes to the next slide.
On the preview playback, only 3 or 4 of the click boxes will work. Then, the click boxes stop working. It's not the same 3 or 4 boxes, but just the first ones that work. If I remove a pause on the continue button, it will work. Otherwise, it stops as well.
Initially, I tried to do this as a simple action. Then, I read that Advanced Actions will allow the playback to continue. The Advanced Action is 1 line that is Show and then the Text Box.
Below is my timeline. I'd appreciate help with this!

Did you see this thread: http://forums.adobe.com/message/5826235#5826235 ?
What is the function of the Buttons on that slide (they have no pausing, are active all the time): especially the Last Attempt action?
What is the Last Attempt action for the click boxes?
Important: how did you preview?
Lilybiri

Bounding Box Not Working

I'm using Illustrator CS4. The bounding box will not appear. I have tried switching between show/hide bounding box with no luck. I tried alt,shift,ctrl at start, did not fix it. Is there a known issue with the bounding box or am I just the lucky one that is having problems? Sometimes if I close Illustrator and restart the program, the bounding box will appear, however this has not worked in the last 20 or so times I have tried.
Help! Thanks -Keith

Keith,
You may try to Move the folder for a change, with Illy closed.

SD Set top box not working in one location. Just displays 4 dashes in place of the time.

At first this Motorola STB just had the lower third program info displayed and no video from the channel itself and in place of that was a screen that said "This channel not available" this on all channels; then screen went blank. I tried a working STB from another bedroom in place of this one and it did not work at this location either. So am not sure what is going on. Any help appreciated, thanks.
Solved!
Go to Solution.

bozey45 wrote:
At first this Motorola STB just had the lower third program info displayed and no video from the channel itself and in place of that was a screen that said "This channel not available" this on all channels; then screen went blank. I tried a working STB from another bedroom in place of this one and it did not work at this location either. So am not sure what is going on. Any help appreciated, thanks.
Sounds like a bad cable. If you have a splitter at the bad location, try removing it. I would also try the suspect box in the working location to confirm both boxes are good. Then you have to decide if you want to try fixing the cable yourself or pay Verizon to do it.

Sapscript - box not works

Similar Messages

Maybe you are looking for