Sapscript error at QA system (TD134)
Hi experts,
I have a Sapscript which I tested at DEV system and everything is ok. When I realeased it for sending to QA system, transport log is ok. But when I try to have a look at it at QA at SE71 t-code, the following error message appears:
Form Z_PEAEPE_PEDIDOS language EN is inconsistent in the text file
Message no. TD134
Diagnosis
An inconsistency occurred in the text data base.
System Response
The form cannot be loaded in the language selected.
Procedure
This error should not occur. Please contact your system administrator.
Could you please help me with it?
Thanks & kind regards,
M.
Edited by: MMP on Jan 12, 2011 3:57 PM
Collect in " data flow in before and afetr" and retransport.
Ravi Thothadri
Similar Messages
-
Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adilDo you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
An error in the system has occurred. Please contact the system admin'
Hi chaps
So I get this message when I try and click "Solved" :
An error in the system has occurred. Please contact the system administrator if the problem persists.
And then when I try to send a 'comment' AppleCare I get
"An error has occurred. Please try again later".
Is it me or them ?
Many thanks RogerHi Roger!
My reply here Error when trying to mark a reply as "solved" , also has additinal information.
ali b -
An error in the system has occurred. Please contact the system administrato
This error appears when I try to access the Leopard Server- Advanced forum:
Error
An error in the system has occurred. Please contact the system administrator if the problem persists.
Useful links :
Forum Home -- browse the forums here.
Search Forums -- visit the search page to query all forum content.Hi Roger!
My reply here Error when trying to mark a reply as "solved" , also has additinal information.
ali b -
Hi, Am facing issue when I try to run SSIS package via C# code, I have given full access to all the folder in which the package is available.
In the below line am getting error,
using Microsoft.SqlServer.DTS.Runtime;
Application app=new Application();
Package package=null;
package=app.LoadPackage("PackageFullPath",null) --error line
Failed to open package file "C:\SSIS\Package.dtsx" due to error 0x800C0006 "The system
cannot locate the object specified.". This occurs when loading a
package and the file cannot be opened or loaded correctly into the XML documentAre you trying to run this code from job or something? Check if account executing the package has access to the path. Also check if path value passed is correct. If its a remote system path pass it in UNC format (ie //machine/...)
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
ERROR MESSAGE sap system manager:work process restarted, session terminated
Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.Hi
follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i> -
Error in local system;message is not complete--- in Solman 4.0
Hello Solman Gurus,
After importing SP 13 in Solution Manager 4.0 , whenever i am trying from help--> create support message ; i am getting "ERROR IN LOCAL SYSTEM; MESSAGE <MSG NO> IS NOT COMPLETE "
i have seen these threads
ERROR when Trying to create support message in satellite system
ERROR when Trying to Create Support Message in Satillite system
create support message
but they are saying about Satelliate system not solman
Please help if you could
regards
NaveenNaveen,
Check if the UserId that is creating the message in SolMan via Help->Create Support Message has roles SAP_SUPPDESK_CREATE and SAP_SV_FDB_NOTIF_BC_ADMIN (the profiles of the roles must be generated, all the authorization objects should be green).
I have SolMan 4.0 SP 13 too, when I delete these authorizations from my userid, I have the same error.
Let me know if you still have the error.
Regards,
Raquel. -
Hi,
On a Windows 2008 R2 we get a Windows Backup error while backupping System State (event id: 5, error code: '2155347997').
We tried *ALL* solutions found on Internet regarding the same issue (and we also applied the suggested hotfix KB2807849) but without success. So we DIGGED INTO VSS to see what is happening.
***1) First we saw that an USB printer had a problem and this resulted in
hundreds of entries in the following registry keys:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100010]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100011]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100012]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79590]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79591]
***2) We completely removed ALL drivers/devices related to that printer (now the DeviceNameStore is empty and
pnputil -e returns no driver related to the printer)
***3) Using process monitor we saw that during vssadmin list writers the system is searching for the DLLs related to that printer AND SEEMS CAUGHT IN AN ENDLESS LOOP: this is an excerpt of the scan:
09:56:34,5205954 svchost.exe 324 RegSetValue HKLM\System\CurrentControlSet\services\VSS\Diag\System Writer\IDENTIFY (Enter) SUCCESS
09:57:18,2310377 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnz005.icc NO SUCH FILE Filter: cnz005.icc
09:57:18,2312877 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnf6500m.icc NO SUCH FILE Filter: cnf6500m.icc
09:57:18,2314854 svchost.exe 324 QueryDirectory C:\Windows\System32\cncmfp20.ini NO SUCH FILE Filter: cncmfp20.ini
09:57:18,2316416 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsi20.dll NO SUCH FILE Filter: cnclsi20.dll
... and so on
.... THE SAME FILES ARE REPEATED HUNDREDS OF TIMES!!!! ...
It seems that somewhere there is a catalog of system files which still contains the references to the (same) files used by the hundreds of devices that WERE present in the DeviceNameStore (see point ***1 above, but now it is empty), and the System
Writer continues to search/enumerate those files and fails.
How can I fix it ? Is there a way to "reset" the System Writer and "rebuild" (???) the correct files that it should backup? (in order to complete a successfull system state backup)
Can you help me?
Thank you in advance.
EDIT: some additional (useful?) information:
* we also ran chkdsk /f C:
* sfc /scannow completes without errors
* in the vssadmin list writers the "system writer" is missing (but - as said above - when we run it the associated process repeatedly search printer dll files in the System32 directory)
* perhaps those file are contained is some filemaps catalog ?!? Is there a way to "reset" them?!?
***EDIT 2***:
I found that the reference to those missing DLLs are in ***C:\Windows\inf\setupapi.ev3*** but if I move the file away the System Writer continues not being listed in vssadmin list writer (though the vssadmin command complete very fast).
This is what is happening:
svchost.exe 324 CloseFile C:\Windows\inf SUCCESS
svchost.exe 324 CloseFile C:\Windows\System32\DriverStore\infpub.dat SUCCESS
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\infpub.dat ACCESS DENIED
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\infstor.dat ACCESS DENIED
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\infstrng.dat ACCESS DENIED
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\drvindex.dat ACCESS DENIED
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\INFCACHE.0 NAME NOT FOUND
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\INFCACHE.1 ACCESS DENIED
svchost.exe 324 CreateFile C:\Windows\System32\DriverStore\INFCACHE.2 NAME NOT FOUND
svchost.exe 324 CreateFile C:\Windows\inf SUCCESS
svchost.exe 324 QueryBasicInformationFile C:\Windows\inf SUCCESS
svchost.exe 324 RegCloseKey HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup SUCCESS
svchost.exe 324 CreateFile C:\Windows\inf\setupapi.ev1 SUCCESS
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev1 SUCCESS
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev1
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev1 SUCCESS
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev1
svchost.exe 324 CreateFile C:\Windows\inf\setupapi.ev2 SUCCESS
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev2
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev2
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev2 SUCCESS
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev2
svchost.exe 324 CreateFile C:\Windows\inf\setupapi.ev3 SUCCESS
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev3
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev3
svchost.exe 324 QueryStandardInformationFile C:\Windows\inf\setupapi.ev3
svchost.exe 324 CreateFileMapping C:\Windows\inf\setupapi.ev3 SUCCESS
svchost.exe 324 CreateFile C:\Windows\System32\drivers SUCCESS
svchost.exe 324 QueryDirectory C:\Windows\System32\drivers\acpi.sys SUCCESS
svchost.exe 324 QueryDirectory C:\Windows\System32\drivers\rdpbus.sys SUCCESS
svchost.exe 324 QueryDirectory C:\Windows\System32\drivers\i8042prt.sys SUCCESS
.... EVERYTHING IS OK UP TO HERE ...
svchost.exe 324 CloseFile C:\Windows\System32\drivers SUCCESS
svchost.exe 324 CreateFile C:\Windows\System32 SUCCESS
svchost.exe 324 QueryDirectory C:\Windows\System32\cncc6500.dll NO SUCH FILE Filter: cncc6500.dll
svchost.exe 324 QueryDirectory C:\Windows\System32\cnci6500.dll NO SUCH FILE Filter: cnci6500.dll
svchost.exe 324 QueryDirectory C:\Windows\System32\cncc6500.dll NO SUCH FILE Filter: cncc6500.dll
svchost.exe 324 QueryDirectory C:\Windows\System32\cnci6500.dll NO SUCH FILE Filter: cnci6500.dll
... !!!!!GET CAUGHT IN AN ENDLESS LOOP!!!!!!!! (System Writer probably ends for timeout)...
Is there a way to rebuild/modify that file C:\Windows\inf\setupapi.ev3
Perhaps I can delete the catroot2 directory?Hi,
Please check if there are number of files in Temporary ASP.NET folders under "C:\Windows\Microsoft.Net\Framework". If so, clear these files then restart the server to check the results.
In additional, you could try the steps below to troubleshoot the issue:
1. Give NETWORK SERVICE Read permissions on COM+ Event System.
a. Open the registry editor and navigate to HKLM\CurrentControlSet\Services\EventSystem.
b. Right click on the EventSystem and then select ‘Permissions’
c. Click on ‘ADD’ button and then type in ‘NETWORK SERVICE’ and give it READ permission.
d. Reboot the machine and then run the 'VSS admin list writers' to check if it shows up the 'system writer'.
2. If the step 1 doesn't work then move the contents of C:\Windows\winsxs\FileMaps to an alternate location. Then run the command 'VSS admin list writers' to check if it shows up the 'system writer'. Is so, some of those files maybe corrupted and we
need to identify them and replace the files from a healthy machine.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error in source system while extracting the data from R/3!
Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
RaviHi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data. -
Error in source system in BI 7.0...
Hi,
When creating a source system in Bi 7.0, when i am going to t code- rsa1- client-right click and then check,it's giving an error like:
EDI- partner profile not available and then detail for this error is-- a partner profile cannot be found with this key- /DBICLNT300/LS
THIS INVLOVES THE KEY FIELD OF THE TABLE EDPP1-
PARNUM-PARTNER NUMBER
PARTYP-PARTNER TYPE
Please help me in solving this. Thank You.Hello,
Try a restore on your source system (rightclick -> restore) This way idoc ports and agreements are regenerated between BW and R/3. If this does not solve the problem ceck this:
Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184754 Procedure after BW database copy
184447 Building a BW-system landscape
184971 Notes on BW source system connections
140276 Error in source system assignment
524554 Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken -
"Error in source system" while creating source system
Hello,
I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
The error occurs after the information "Please log on as an administrator in the following screen".
The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
What else could be the problem?
Greetings & Thanks
BettinaHello,
now we know that
1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
2. the system has to be changeable (scc4 and se03)
After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
Thanks for the tip regarding the authorizations.
Greetings
Bettina -
Hi ,
When i am entering the stms_import , am getting below error often.
System QBW Command TMS_MGR_READ_TRANSPORT_QUEUE
Client 000 Service Transport Service
User TMSADM Start Online
Date 09/19/2011 Function TMS_TP_SHOW_BUFFER
Time 08:29:15 Message TP_REPORTED_ERROR
Transport control program tp ended with error code 0212
Errors: could not access file as supposed (see dev_tp or S
This is tp version 372.04.71 (release 700, unicode enabled)
ERROR: Could not open file /tmp/dev_tp_1690 for writing
ERROR: Could not open file /tmp/dev_tp_1690
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
Please guide me how to resolve this issue.We are not getting this error always . only few times in day.
It looks like you have problem with any 1-2 application Server only related to Filesystem Permission or Mounting.
Check in SM37 for cancelled RDD* Job and note on which app. server it gets cancelled.. you may find app. server name. Now you should check from that app. server.
thanks
ashish -
Error:invalid central system in requet approval process(AE)
Hi,
In AE while approving the request, in final stage i am getting an error "invalid central system ".anyone please help me to know the solution for this?You need to check whether the system for which you are doing the provisioning is a part of your CUA system. If not then Go to the
Configuration tab-> Workflow-> CUA System.
In the system change the value to the "-Select-". Then you will be able to create the request for your system. -
Error in Source System While Uploading Data from ODS to Data Target
Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
ChakriThis generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG -
While loading data from r/3 to bw error 8 /error in source system is coming
while loading data from r/3 to bw error 8 /error in source system is coming . how can i solve this problem .
Check source system connectivity.
Tcode RSA1 --> Source System RClick --> 'Check'
Maybe you are looking for
-
Report on current stock and safety stock
Hi, I want to have the report on current stock and safety stock. In MC.9 it gives wrong safety stock. When I go to cross check the safety stock in material master & in MC.9 I see differences. Thanks, Kiran
-
[Solved] Cannot "su" properly in a terminal due to a .bashrc error
The problem is simple: I cannot su to my root account properly. I can do so successfully in that I can become "root" but I get no output on the screen after typing in a command. E.g., this is what my terminal shows after su'ing to root and typing
-
hi i am developing the web application in which i want to put record of in which there is the image and i dont know hove to insrt image in database using jsp or servlet if anyone have anser plz .
-
Hi Xi Sappers, I am new to the XI world. I was looking for some documentation on how to conduct a POC (Proof of Concept) for XI. Basically it should encompass a sample landscape, most common business scenarios, ways to test thruput, error messaging,
-
The WebApplicationException log ID is [00219B410BF5006A00000000000008D4]
Dear all: I open IE but it response err msg. plz hlep me. 500 Internal Server Error Error: "Application error occurred during the request processing." Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home Detail