SAPSCRIPT - How to define the printer try on sapscript ?

Hello ,
I have to print the same document on several copys by sapscript.
one copy on printer try N° 1, another copy on printer try N° 2, etc etc ...
How and where define these parameters ?
tks
Edited by: Roberto Baldassarre on Nov 29, 2010 10:14 AM

Hi,
For SAPScript,the tray is always specified in the form itself via transactin SE71 under "Pages", "Print Attributes" as per the SAP Note: 42565 - Select paper feed when printing SAPscript in 3.0x
The tray settings in transaction SPAD have no effect with SAPSCRIPT printing as described in Note #42565. So you must enter the tray in the sapscript form as follows:
se71 -> <Form Name> -> Pages -> Print Attributes -> Resource Name -> Enter TRY01, TRY02, TRY03...
So for your problem, I thnk the only solution id to make a copy of the sapscript form and just change the TRYxx setting. Then in your application program, you need to call original form and then the copied form etc.
Regards,
Aidan

Similar Messages

How to define the margins of a leaf in numbers 3.2

how to define the margins of a leaf in numbers 3.2
leaves appear without margin and not when moving from one sheet to another

Hi Ariel,
Numbers 3 does not show margins in normal (edit) view. Some help with layout:
Try Alignment Guides and Rulers as suggested here:
Print View workarounds
Use a layout guide:
Layout Guide for Numbers
If you previously had Numbers 2.3 (Numbers '09) it now lives in a folder called iWork '09 inside your Applications folder. It works just as well as it used to, and has a proper Print View.
Regards,
Ian.

How to define & read Standard Text in SAPScript? Urgent Please

Hi Experts,
How to define & read Standard Text in SAPScript? Urgent Please..
Thanks in advance
good answer will points gud marks.
sekhar

Hi
U can't define a standard text in a SAPScript, you call call it only by statament INCLUDE
/: INCLUDE <ST TEXT NAME> OBJECT TEXT ID ST LANGUAGE <LANGUAGE>
U can define it by trx SO10.
If you need to know the text without to print it, you need to use a routine where u can use the fm READ_TEXT in order to find out the text.
Max
Message was edited by:
max bianchi

How to select the printer and select the ICC profile for printing with VBScript?

I try to automate my printing procedure in photoshop. The problem is that I don't know how to select the printer and select the icc profile for printing with vbscript like I manually do in the print-menu in photoshop?
Anyone has done this before?
Thanx!
jus

Client/Server version:
- D2KWUTIL.PLL library provides a 'Select Printer' dialog box to be used in Forms: WIN_API_DIALOG.SELECT_PRINTER
http://guenter-huerkamp.dyndns.org/oracle-doc/docs/html/d2kwutil.html
I suggest you to create a form to invoke the report, allowing user to select the printer and then pass it as parameter DESNAME

How to define the memory leak in stability test

Hi
Usually, we run our system with 70% CPU load for 72 hours for stability test (on solaris 10), because some plugin of our system is using mtmalloc, and we use prstat to monitor the memory of each plugin. But because of the complex memory usage of our application, we don't know when the application will use the Max memory, and because of the "mtmalloc", the memory showed by "prstat" will not released but continually increased.
So fro the test point of view, there is the risk of memory leak, but actually, there may be no memory leak, so my question is how to define the memory leak in such condition.

kevin wrote:
Thank you for the input and all the info.
isn't java heap the same as memory allocated to the java process in my weblogic
starup script ?The heap is sized by the -Xmx and -Xms parameters you pass on the java
command-line. The permanent generation is separate.
>
let me also download jprobe and try to run it and see what it gives me.
I'd start by running with -verbose:gc. I'd want to know whether you're
running out of heap or permgen space.
-- Rob
kevin
Rob Woollen <[email protected]> wrote:
Unfortunately memory leaks are not fun to track down even with tools.
I'd first suggest determining whether you're running out of space in
the
permanent area (where classes are loaded), or you've exhausted the java
help space.
I'd start by adding -verbose:gc. Look at the gc messages right before
you hit the OutOfMemoryError. If there's plenty of space left, I'd
suspect you're running out of perm space. Search these newsgroups and
the web for MaxPermSize, and you should see plenty of info.
If you're running out of java heap, tools like jprobe and OptimizeIt
are
helpful. If you can tell me a little more about your application and
how you're testing it, I can offer some more tips.
-- Rob
kevin wrote:
Iam new to JAVA and weblogic. I have an application that runs out ofmemory time
and again.
please let me know how to pin point this problem and moreover, howto interpret
or understand that there is a problem. I have downloaded JPROFILE tool,but it
is very confusing to understand what is goin on in this tool.
If somebody can let me know how to interpret and understand the memoryleak, that
will be great !!!
thank you.

How to define the running order of the listeners

Hello
I would like to know how to define the running order of the listeners in my Dialogs.
e.g. loadcontent on each element will do different things and some depedent on others to load when you you need the generated values based on the generated values of another element
Thank you
Nikolas

Hi mei
instead of using append use modify.
i hope this might help you.
gs_fieldcat-fieldname = 'VRT'.
* gs_fieldcat-ref_table =.
gs_fieldcat-outputlen = '3'.
gs_fieldcat-edit = 'X'.
gs_fieldcat-key = 'X'.
gs_fieldcat-coltext = 'VRT'.
gs_fieldcat-col_pos = 6.
<b>*append gs_fieldcat to gt_fieldcat.
modify gt_fieldcat from gs_fieldcat.</b>
clear gs_fieldcat.
gs_fieldcat-fieldname = 'QTY'.
gs_fieldcat-datatype = 'FLTP'.
gs_fieldcat-outputlen = '12'.
gs_fieldcat-DECIMALS = '3'.
gs_fieldcat-coltext = 'QTY'.
gs_fieldcat-edit = 'X'.
gs_fieldcat-col_pos = 7.
<b>*append gs_fieldcat to gt_fieldcat.
modify gt_fieldcat from gs_fieldcat.</b>
or u can also try this way.
form build_fieldcat changing gt_fieldcat type lvc_t_fcat.
data gs_fcat type lvc_s_fcat.
call function 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
            i_structure_name = 'TABLE NAME'
       CHANGING
            ct_fieldcat      = gt_fieldcat.
clear gs_fcat.
loop at gt_fieldcat into gs_fcat.
    if gs_fcat-fieldname EQ 'VRT'.
      gs_fcat-scrtext_s = 'VARIETY'.
      gs_fcat-scrtext_m = 'VARIETY'.
      gs_fcat-scrtext_l = 'VARIETY'.
      gs_fcat-reptext   = 'VARIETY'.
      gs_fcat-seltext = 'VARIETY'.
      gs_fieldcat-outputlen = '3'.
      gs_fieldcat-edit = 'X'.
      gs_fieldcat-key = 'X'.
      gs_fieldcat-col_pos = 6.
      modify gt_fieldcat from gs_fieldcat.
     endif.
    if gs_fcat-fieldname EQ 'QTY'.
      gs_fcat-scrtext_s = 'QUANTITY'.
      gs_fcat-scrtext_m = 'QUANTITY'.
      gs_fcat-scrtext_l = 'QUANTITY'.
      gs_fcat-reptext   = 'QUANTITY'.
      gs_fcat-seltext = 'QUANTITY'.
      gs_fieldcat-outputlen = '3'.
      gs_fieldcat-edit = 'X'.
      gs_fieldcat-key = 'X'.
      gs_fieldcat-col_pos = 7.
      modify gt_fieldcat from gs_fieldcat.
     endif.
and so on.....
endloop.
regards,
venu.

Oracle VM 3.1.1 - How to define the YUM repository URL

The documentation shows an example or two about how to define the URL of the Yum repository I created, but it doesn't seem to define EXACTLY what to do. For example, the URL to the directory with my RPMs in it is:
http://my-yum.acbl.net/yum/OracleVM/OVM3/3.1.1/patch/x86_64/getPackage
Can someone tell me how much of that path I should enter into the "YUM Base URL" sub-tab under the "Tools and Resources" tab in the VM Manager? I have tried to make an intelligent guess (or two), but it's not updating properly, and I don't know if I'm entering the URL properly.

Thank you. I'll try that, and update this again, if it seems to be wrong.
I actually opened an SR on this, and asked this same question. After several hours, I got a response, something like "What part of the documentation do you find unclear?". I tried to carefully explain that the docs don't (as best I can tell) define how much of the path should be in the URL given to Oracle VM. I still haven't heard back.

The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

Is the Paper Size: set to US Letter and Scale: set to 100%
Dennis

How to see the print preview of outgoing excise invoice.

Hi Experts,
How to see the print preview of outgoing excise invoice.
Thanks,
srinivas.

Dear Sreeni,
Just go to J1IIN, click on "Exc.inv for delivery -- Display" where you input delivery reference and execute. If you have generated excise invoice, you can see the corresponding excise invoice for that delivery / billing document.
Preethi.

How to use the print option for photos?

How to use the print option for photos. I have a wireless printer but how do I set it up?

http://www.apple.com/support/iphone/assistant/airprint/

How to lock the Printer of LaserJet Pro 500 Color MFP m570dw

how to lock the Printer of LaserJet Pro 500 Color MFP m570dw

You can set a control panel lock security level and password for your HP LaserJet series printer. To lock your printer, follow below link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl03612

HT4356 I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office?

I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office when you use Airprint?

You would have to change that in the printer's settings on the printer, if that option is offered by the manufacturer. The iPhone just finds printers on the network and uses the name they have given themselves or that were given to them when they were set up.

How to define the date format for this date string

2006-11-13 00:00:00.0
How to define the date format in control file for sqlldr. "yyyy-mm-dd hh24:mi:ss" or "yyyy-mm-dd hh24:mi:ss.FF1" does not work
thanks,

SQL> desc t
Name Null? Type
TS TIMESTAMP(6)
SQL> !cat t.ctl
load data
into table t
truncate
(ts timestamp "YYYY-MM-DD HH24:MI:SS.FF1")
SQL> !cat t.dat
2006-11-13 00:00:00.0
SQL> !sqlldr userid=scott/tiger control=t.ctl data=t.dat log=t.log
SQL*Loader: Release 10.2.0.3.0 - Production on Fri Sep 7 11:19:28 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 1
SQL> select * from t;
TS
13-NOV-06 12.00.00.000000 AMBest regards
Maxim

How to define the application parameter 'sap.xss.BaseConfigurationID'

Hello All,
I am developing a webdynpro ESS custom self service application. I have completed the development of the DC. But at the end when I am creating the application for the DC, I am not able to figure it out how to define the application parameter 'sap.xss.BaseConfigurationID' for the application. I have defined remaining all the parameters as specified in the following link.
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/43/3b95dab4ab1800e10000000a1553f6/content.htm]
Could any one please detail the process to define the parameter 'sap.xss.BaseConfigurationID' ?
Thanks a lot.
Regards,
Seshu.

Pick a representative file.
Get info. (Command-i)
There you will see a place "Open with" where you can select the application for that file.
Hit the "Change all..." button to do this for all files of this type.
charlie

How to define the default activity for an unbounded task flow?

In the new "Fusion Developer’s Guide for Oracle Application Development Framework 11g Release 1" documentation at the bottom of page 14-3 it states "An unbounded task flow .... contains a default activity, an activity designated as the first to run in the unbounded task flow, because an unbounded task flow does not have a single point of entry."
What I can't find is how to define the default activity in an unbounded task flow and where this is recorded? Can we set this via the task flow diagrammer, and which configuration file is it stored?
I note the first time I run the application with an unbounded task flow a dialog asks me which of the activities in the adfc-config.xml file to make the default, but I can't find where this is recorded.
Anybody have any ideas?
Thanks,
CM.

Chris,
In fact this information is nothing that belongs into the taskflow meta data because unbounded taskflow have more than one entry point and there is no notion of default. Its a tools setting (JDeveloper) we had before
Frank
Message was edited by:
Frank Nimphius

SAPSCRIPT - How to define the printer try on sapscript ?

Similar Messages

Maybe you are looking for