SAPScript : Invoice For Payment

SAPScript : Invoce for payment
Posted: May 15, 2006 2:04 AM Reply E-mail this post
Hi Friends,
Please tell me the Program Name and SAPScript form name for following condition for <b>RUSSIA</b> -
Invoce for payment : Customer service receives the order from the customer and place the order.
Thanks & Regards
Kishor

Hi
To find out, you can use transaction NACE, in the list of applications, choose the application 'V3'(then click on output types in the menu (application toolbar).
Choose the appropriate output type 'RD00' and then double click on processiing routines (in left hand side menu).
Now you should see the program name with the script name.
Program: RVADIN01
Form: RVINVOICE01
I may not be correct but now you know how to find out. So, try choosing the right application and appropriate output type.
Regards
ashish

Similar Messages

Change Document - Block Invoice for Payment - BAPI

Hello All,
I have the requirement to block an invoice for payment through the Portal.
In FB02 transaction, we can select an item and set the "Payment Block" indicator to B (blocked) for instance.
I would like to know if exists a BAPI that allows this update. If not, if exists a function module for that (then we could create our own BAPI).
Thanks in advance,
Marco

Hi Marco
The BAPI never sets a payment block indicator by itself. It doesn't do so even when you have a payment release workflow
activated where FB01 would automatically set the indicator.
For BAPI calls you must always pass the payment block indicator in ACCOUNTPAYABLE-PMNT_BLOCK or code a user exit as described in note 487722 to populate the indicator automatically.
In the normal FI posting transaction code, for example:FB01, system will read the customziing in Tcode OBB8 ->if Block key is defined and the flag of Transfer payment block when changing terms of payment is on, the system will set the this payment block into corresponding line items in which this payment term is used. please refer to source codes:
Main Program     SAPFF001
Source code of   SAPFF001
    CALL FUNCTION 'FI_FIND_PAYMENT_CONDITIONS'
      EXPORTING
        i_zterm            = bseg-zterm
        i_bldat            = bkpf-bldat
        i_budat            = bkpf-budat
        i_cpudt            = bkpf-cpudt
        i_zfbdt            = bseg-zfbdt
        i_funcl            = t020-funcl                     "ERP05
      IMPORTING
        e_t052             = t052                   <<<<< import customizing in T052(Tcode:OBB8)
        e_zfbdt            = bseg-zfbdt
        e_sklin            = sklin1
      EXCEPTIONS
        terms_incorrect    = 4
        terms_not_found    = 8
        no_date_entered    = 12
        no_day_limit_found = 16.
    CASE sy-subrc.
      WHEN 0.
      WHEN 4.
        MESSAGE e737 WITH bseg-zterm.
      WHEN 8.
        MESSAGE e100 WITH 'T052' bseg-zterm.
      WHEN 12.
    MESSAGE.
      WHEN 16.
        MESSAGE e024 WITH bseg-zterm bseg-zfbdt+6(2).
    ENDCASE.
*------- Zahlungsschlüssel und Zahlungssperre vorschlagen -
    bseg-zlspr = t052-zschf.    <<<<<<<< payment block is set
    bseg-zlsch = t052-zlsch.
ENDIF.
Hope above explanation are useful for you to find the solution.
Best Regards,
Gladys xing

QM in procurement: block invoice for payment if certificate not received

Hi,
I want to know if it possible to automatically block an invoice for payment if certificate in procurement hasn't been received.
I don't want to block the material, that is: I want to receive the material, transfer it in unrestricted stock but I shouldn't pay the invoice until its correspondant certificate is received.
Is it possible?
How should I proceed?
Thanks in advance.
Luis.

Try user exit MIRO
LMR1M001 User exits in Logistics Invoice Verification
MRMN0001 Message output and creation: Logistics Invoice Verifica

SAPScript form an rogram for "Invoice for Payment"

Hi Friends,
Please tell me the Program Name and SAPScript form name for following condition -
<b>
Customer service receives the order from the customer and place the order (document "Invoce for payment"). </b>
Thanks & Regards
Kishor

If you want to change the standard script format, then you have copy program and form. And attach the same in config.
Form : ZF110_PRENUM_CHCK
Program : ZRFFOUS_C
Regds
Manohar

How to avoid cancellation of invoice for payment recevied

Short Description:
Cancellation of Invoice raised on customer after receipt of Payment from him
Description:
There is an Invoice dated 22.10.2008. We have received the payment for this Invoice vide document number posting date 06.12.2008. So the Invoice has been cleared. Now the Invoice has been wrongly reversed / cancelled vide Invoice No. dated 11.08.2010.
Is there any check that we can put so that the system does not reverse the Invoice for which payment has been received. Is there any standard check for the same.
Please guide
Thanks.

Yes SAP has given a standard routine to meet this requirement.
Go to VTFL, select your delivery type and billing type and execute. There you can see a field "Copying Requirements". Maintain routine 29 here and save. Also, go to VOFA, select your billing type and assign this routine to the same field.
Now try to cancel a billing document which has its status as "Cleared".
thanks
G. Lakshmipathi

Hold AP invoice for payment from project

My clients project managers want a say on AP invoice payments , after supplier invoice has been created against a project. Typically we are looking at some kind of "Hold" that can be put on Supplier invoice from projects module and then AP invoice should be disable for payment processing. This invoice should be enabled for payment only after this hhold is removed from Projects.
Do we have this kind of function directly or indirectly?
Cheers

Hi
The feature you are looking for in Projects is part of the newest release of 12.1 or the next point release.
You could use a trigger for puting an hold, but then you need to have in place a work process where AP person sends an email to the project manager to ask for its approval, and upon the off-line approval the AP user will release the hold.
Alternative approach is to utilize AME - Oracle Approval Management. You can set up the approval rules of the supplier invoices, so for project invoices the system will trigger the workflow and send notification to project manager. The Project Manager approval is releasing the invoice and make it available for payment.
Dina

To view who has released vendor invoice for payment.

hi team,
we have a PO for GR based IV. we received invoice for more qty and was accepted. when i simulate in quality, system is working fine. but the client is saying that system is not blocking the invoice. but i feel that system blocked it but it is getting released. where can I see that who has released this blocked invoice.
thank you, satish

Hi
enter the document no in FB03 enter
go to thef ourth ICON (Header ) Tea cup shape press that
you can see under which login the document got posted you can get all the details
Regards
Ganesh

How to adjust advance in part/full against invoice for payment to vendor

Dear Experts,
I need all your expertise view on a scenario.
what i am trying to do is like i have given advance to vendor 10000 and deduct 100 tds on it.
now vendor send the invoice amount 30000 and we deduct tds by doing adjustment in invoice manually against advance amount and deducted tds 200 on invoice.
now vendor ask us to adjust the advance amount 3000 from 10000 advance amount against invoice and then do the payment for it. and we like to pay only 21000 against remaining amount after adjusting advance using partial payment method.
So please tell me the steps in detail with accounting entry to post this in sap.
Regards
Arun Rai

Hi,
You can clear down payment against invoice via F-54. Simply enter the data by entering the invoice number.
Regards,
Jigar

Grouping invoices for payment across orgs

Hi All,
In R12 parables, Is it possible to make a payment of two invoices as below created under two different operating for the same supplier and supplier site using the same payment.
(Using a PPR single payment request)
ORG_ID VENDOR_ID VENDOR_SITE_ID
200 5355 5325
310 5355 5325
Any setup is required or any workaround ?.. Any pointers to any customization is also highly appreciated
Kindly advise ..
Thanks,
Rizwan.
Edited by: Rizwan(Oracle) on Sep 17, 2012 6:48 AM

Hi There.. Any reply are appreciated.. kindly advise..

Match Bill Of Lading With invoice for payment

HI All,
In my current project, client is using 3PL (third party logistics) for transportation of goods from one plant to another plant. We are creating Bill of Lading but not using Transportation component of LE. Client has a requirement to use the bill of lading as a cross reference when posting invoices and making payments within SAP system. Can anybody please advice on how we can get this requirement configured in SAP?
Any help is highly appreciated.
Regards,
Shamsul

Thanks Kumar. We have BOL field in MIGO and we have allocation available to BOL in MIRO also. I'll test the scenario and will update you on that.
Thanks for your time.
Regards,
KHAN

Invoice is not picked for payment

Hello SAP guru's
I am facing a strange issue with Invoice for payment.
Here, Invoice had been paid and later check was voided and move to open payables but later It's not picked for the payment run after i change the payment terms to Immediatley.
what could be the cause for this? any idea will be appreciated with good reward points.
rgds,

Thanks for reply.
This Invoice is in open payables as i said.
Due date : 08/26/2007, payment terms : PT00 ( pay immediatley).
Other invoices posted after this document to this vendor are posted and paid without any issue.
I am not sure how to check the payment run to consider this invoce for payment though all above parameters allow for payment immediatley.
rgds,

Payment Block field in invoice displays 'Free for payment 'even though ?

Hi,
We have set necessary upper tolerance limit for Price & Quantity variance in OMR6.This should block invoice for payment in case if this limit is crossed and payment block field in invoice should display "R Invoice verification".
In our case if material is having standard price then we are getting desired results in both the cases of Quantity variance and price variance . However in case of material with moving average price it works fine in quantity variance but not for price variance(Here invoice gets blocked for payment but payment block field displays "free for payment").What can be probable reason for this?
Material ledger is activated in our case.
Thanks in advance,
Sanjog

Hi,
Currently, we are also facing the same problem.
The payment term are not getting populated after posting the invoice.
Could you please help to overcome the issue.
Thank you.
Warm Regards,
Kalyani

Invoice block for payment when no GR

Hi Folks,
I would like to block an invoice for payment, when no GR has been made and we do not want to use GR based IV!!!!
We want to be able to post the invoice even though no GR has been done.
I tried to mess around with tolerance DQ, without success. I tried to set the tolerances to 0 but no block is set.
Any ideas?
Thanks in advance,
Thomas

Hi,
Try Tolerance Key "DW" : Quantity variance when GR quantity = zero
It functions in following way;
DW: Quantity variance when GR quantity = zero
If a goods receipt is defined for an order item but none has as yet been posted, the system multiplies the net order price by (quantity invoiced + total quantity invoiced so far).
The system then compares the outcome with the absolute upper tolerance limit defined.
If you have not maintained tolerance key DW for your company code, the system blocks an invoice for which no goods receipt has been posted yet. If you want to prevent this block, then set the
tolerance limits for your company code for tolerance key DW to Do not check.

Work flow for payment release

Hi,
i hv configured payment release workflow for vendor payments, now the system is creating an auto block for invoices parked thru FB60. Now I desire to release the invoice for payment, so that my workflow gets triggered. But I dont know which Tcode to use to release the invoice for payment. If F110 can be used to relase the payment, kindly let me know how it is to be done. As I tried doing it but was not successfull.
Regards,
Krishna

Hi
If you have not assigned any agents to payment release task, then go to SAP Business workplace (ctrl+F12) and check in your inbox. You would have received an email through SAP workflow. Click on the email and it will direct you to release the invoice for payment.
Though you release the invoice it can not be paid unless you activate a task for "Reset Payment block"
You need to activate two tasks as below
Release for payment
and
Reset Payment block.
Once the invoice is released for payment then the status of BUS # changes to Released. You need to activate the task " Reset Payment block" with triggering event "Released".
Once the invoice is blocked for payment through workflow, the blcok can never be removed manually. This should be removed only through Workflow.

Entering Invoices for an EXPIRED Blanket PO

Hi All,
Howcome the system lets me enter Invoices for an expired Blanket PO (when the Validity End date has passed) but there is a remaining amount in the overall limit (for example, out of 1,000 USD limit....Invoices upto only 700USD entered....so 300USD remaining...but the Blanket PO is expired).
I thought what ever comes first --- the Value Limit OR the Validity End date would block further invoices for payment?
Isn't this the case?
Thanks in advance
Edited by: Duke Dukester on Sep 17, 2008 12:07 AM
Edited by: Duke Dukester on Sep 17, 2008 12:10 AM

On a framework order by setting the item category to B will invoke the
Limit functionality on the PO. The expected value will be the price
that appears on the PO. The overall value is the absolute limit that
the system will accept against this PO. The overall value can be larger
than the expected value, never less.
Using MIRO; (1) enter the invoice date, reference # and amount of
invoice. (2) enter the PO #, (3) ensure the display variant = account
assignment - cost center. (4) click on the yellow arrow icon in the
account assignment column, (5) enter the invoice amount on the first
line of the account assignment box, (6) click the BACK button on the
account assignment box, (7) the traffic light should now be green and
you can save your invoice.
regards
kunal
award if helpful

SAPScript : Invoice For Payment

Similar Messages

Maybe you are looking for