Sapscript Justified, Not left-justified, not right-justified, but Justified

In Sapcript (46c) I would like to use Alignment Justfied (or Block). Not Left-Justified or Right-Justified. I have created a Paragraph Format with alignment Justfied (Block) and used it in the Std Text which is called as an INCLUDE in the Sapcript. But it does not align as a Block.

Hi Julie, it may be a silly question but....have you tried using the paragraph format directly in the sapscript rather than in an include? It could be an issue with the include. I don't mean stop using the include in your long-term solution just test it out to see if you can get the justified format working in-line.
Cheers,
Neil

Similar Messages

New thunderbird won't send messages saying some of my addresses I've used for years are not right syntax but they are.

Setting up different computer since lightning strike took out my ethernet (but not much else). Using Mint Linux 13. New setup on this computer with all the latest updates including Thunderbird 31.
Have imported my old addresses that I've been sending to for years but this new t-bird will not allow some emails saying they are not proper sytax when they are. Nothing has changed on the addresses, just Thunderbird has changed. Because of these few it refuses, it won't sent ANY emails now except for replies. Replies using the very same addresses go through with no problem. Lately it finds just one address it refuses but when I take that one out (have to start over now - won't allow me to delete) then it comes up with a whole other list and DOES NOT SEND ANYTHING. This is damned frustrating, to be frank.

What is the exact error message?

790GX-G65 Voltages not right!

Hi all ..am new to your forum!
i recently purchased a pc which i assembled..here is my specs
Processor- AMD Phenom II x4 965 BE c3 stepping 125w (stock HSF + Thermal pad{stock})
Motherboard- MSi 790GX-G65
RAM- Kingston DDR3 2x2GB 9-9-9-24 1333Mhz
PSU- Corsair vx550w
HDD- WDC 500GB
Graphics- XFX Radeon HD 5770
everything works fine but when i checked the voltages using Everest Ultimate...this is what i got
as u can see the voltages are not right..
but whn i checked in bios ..it was okay!
this is from CPUID HW Monitor
is this common..or am doing something wrong!....please tell me...
and 1 more thing ...my cpu idles at 51c and when on load goes upto 65c....is this right???
please guys guide me!!

Quote
as u can see the volatages are not right..
but whn i checked in bios ..it was okay!
Software voltage reading isn't accurate and can't be trusted
Quote
and 1 more thing ...my cpu idles at 51c and when on load goes upto 65c....is this right???
Sound about right:
You can also double check those:
• Verify that CPU is not exceeding recommended temperature by checking the CPU temperature in the BIOS under PC Health status
•    Check CPU heatsink/fan is properly installed
•    Verify that any cover over the thermal interface on the bottom of the CPU HSF is removed
•    Check computer case for proper ventilation

Cursor not right-justifying in Oracle Forms 11.1.1.6.0

Hi All,
A user notice during testing that 'cursor not right-justifying' in a field on a form. There were not such problem in the old forms enviroment 10.1.2.0.2 and clients running JInitiator 1.3.1.22. The new forms enviroment is Oracle weblogic 10.3.6, Oracle forms and report 11.1.1.6.0, using forms demo pack cursorpos.jar and demo90.jar, have try the 11g demo pack but still the same problem, any ideas?
Thanks
Ola

A user notice during testing that 'cursor not right-justifying' in a field on a form.What exactly do you mean by "cursor not right-justifying"?
You will find noticable differences between the way the Oracle Jinitiiator and Oracle (Sun) Java work. Remember, the Jinitiator was based on the Sun JRE/JDK 1.3 and Forms 11g will be using either Java 1.6.0 or 1.7.0.
Craig...

Anchor in Safari is not working from left to the right (visa versa) other browsers are working corectly with this!

Hi,
The Safari anchor problem is back! But now for using an anchor from the left to the right and visa versa (it is for a website design).
Apple solved the problem for using the anchor from the top to bottom and bottom to top but NOT from the left to the right and right to the left.
I test it in several browser (Firefox, Chrome, Opera, IE8, even in IE7 is it working ;-) but not The Safari of the Big Apple!!!
You can test it here: http://www.douma.biz/anchor_problem_safari/
I put a little script in it so it is going smooth to the right and left. It is also not working without the script, so that is not the problem.
You can test it in: Firefox, IE8, IE7, Chrome, Opera etc. But Safiri is it not working!
So can somebody help me? I tried the max-height, max-width, with and without overflow-x hidden, etc etc. but it is still not working in Safari.
Best regards,
Stephanie

Is it again a bug???

I can not right click "open in new tab" nor open in new window, in my bookmark file.the bookmarks are all there, but I have to open a tab first then left click to open an item. Why can't I right click? The options are there, but not highlighted/clickable.

I can not right click "open in new tab" nor open in new window, in my bookmark file.the bookmarks are all there, but I have to open a tab first then left click to open an item. Why can't I right click? The options are there, but not highlighted/clickable.

now it is working?! Go figure. Yeah! Thanks anyway......

My trackpad will swipe left between full-screen apps, but it will not swipe right

My Trackpad on my imac will swipe left between full-screen apps, but it will not swipe right. How do I fix this?
-m

Hi there!
I am searching this forum to find somebody that has noticed this weird behaviour. The closest I came so far is your post.
So let me explain a little easier... The problem I think you mean is:
When switching bewtween applications using CMD+TAB it does switch to the space an app is open BUT the app switched to is behind all the other windows on that space. Is that correct?
This problem is also bugging me alot because I am used to to switch fastly between apps and this just renders the whole process useless. The best workaround I found so far is to stop using spaces (or Mission Control) and keep all the apps in one space to prevent this from happening.
I really hope Apple aknowledges this bug very soon because this LION deal is a complete mess. Tons of bugs. No fixes.

Command-delete, command-left and command-right not working as expected

On a Mac (in my case OS X 10.6.8) when entering text into a text-field or text-box 'command-delete' in any other application deletes everything between the cursor and the beginning of the current line. I'm using Firefox 10.0.1 and this does not work.
Also, in certain rich text editors such as Gmail's compose mail text-box 'command-left' and 'command-right' which would usually jump to the respective beginning or end of the current line doesn't seem to work.

Try:
Create Table ImportLog
( recid int,
grouploadid int,
groupid int,
tablename varchar(128),
note varchar(500)
Insert Into ImportLog
Values
(1,216,1,'tableb','noteb'),
(2,217,1,'tablea','notea'),
(3,217,2,'tableb','noteb'),
(4,217,1,'tablea','notea'),
(5,230,1,'tableb','noteb'),
(6,244,1,'tablea','notea'),
(7,244,2,'tableb','noteb'),
(8,244,3,'tablec','notec'),
(9,217,3,'tabled','noted')
select r1.RecID, r1.GroupLoadID, r1.groupid, r1.tablename, r1.note,
r2.RecID, r2.GroupLoadID, r2.groupid, r2.tablename, r2.note
from ImportLog r1
full join
(select RecID, GroupLoadID, groupid, tablename, note
from ImportLog
where GroupLoadID = '217'
) r2
on r1.TableName = r2.TableName and r1.Note = r2.Note and r1.Groupid = r2.Groupid
where r1.GroupLoadID = '244'
order by 1
GO
DROP Table ImportLog
GO
RecID GroupLoadID groupid tablename note RecID GroupLoadID groupid tablename note
6 244 1 tablea notea 2 217 1 tablea notea
6 244 1 tablea notea 4 217 1 tablea notea
7 244 2 tableb noteb 3 217 2 tableb noteb
8 244 3 tablec notec NULL NULL NULL NULL NULL
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Swipe left and swipe right not 'sticky' enough in DPS

I've found that when using the Swipe left and Swipe right function in tandem with DPS, the swiping action swipes away from the page. Any way to make the action 'stickier' so that it actually does what the action is set up to do and not swipe away from the page?
Thanks

Thanks for your replies Elaine and Neil. I'm referring to the 'swipeleft' and 'swiperight' actions within Edge. I'm attaching a screenshot (swipeleft and swiperight at bottom of list). The deal is...when I set up a button in Edge to swipe left or swipe right, my finger doesn't seem to 'catch' the button which cause the whole page in the app to swipe.
I was wondering if there is any js that can be written into Edge to help this.
Thanks,
Ian

I left Adobe Muse so not right on my Mac.

Hi everyone, I left Adobe Muse so not right on my Mac.
And now, he told me to contact the adobe muse team to help me.
Please how I should do to open it?
It appears to me that message.
<< Assertion failed in file "/Users/erato/Workspace/workspace/Build_Blob_Mac/dvaapp/Muse/project/mac/../../src/MuseIM SConnector.cpp" at line 856: fUserEmailId==dvacore::utility::UTF8to16(emailID) user id mismatch>>

Please see Re: Adobe Muse Error

Move to previous or next magnified photo Press Left Arrow and Right Arrow keys does not work

Move to previous or next magnified photo
Press Left Arrow and Right Arrow keys
This command no longer works in iPhoto. The photo just bounces for a moment, then all the photos begin scrolling. I used to be able to just hit the key to scroll one at a time.

What version of iPhoto and system are you running? What mode are you in, edit, full view, full screen, ???
OT

Oops, something is not right... Flash Plug-In Warning Explanation: You do not have the Flash player installed on your browser. How to Fix the Problem: This game requires the Flash plug-in. Download the latest Flash player now.

When I try to play certain games on pogo, I get this: Oops, something is not right...
Flash Plug-In Warning
Explanation:
You do not have the Flash player installed on your browser.
How to Fix the Problem:
This game requires the Flash plug-in.
Download the latest Flash player now.
So I download latest still get error message

It is best to go to the source, Adobe, to get their software and updates. Sometimes malware can infect sites with messages that appear legitimate, but will, instead, install malware/virus/trojan on your system. Read the following carefully to install and/or update Adobe Flash.
There are 2 versions of Adobe Flash; an '''ActiveX version''' for IE only and a '''Plugin version''' for most other browsers including Firefox. On a Windows system, you should always update both individually. '''''You do not have Adobe Flash (aka "Shockwave Flash" in Add-ons > Plugins) installed.'''''
#'''Using Firefox''', go to the following direct download link and SAVE the download to your desktop so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#Direct link ActiveX version for IE '''''only''''': http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

This is not right: time limit on iMac G5 Repair Program

iMac G5 Repair Extension Program for Video and Power Issues
http://docs.info.apple.com/article.html?artnum=302181
The program covers affected iMac G5 computers for up
to three years from the original date of purchase.
Apple sold iMacs G5 computers that were defective when they left the factory. Apple knows the cause of the defects. In some of the affected iMacs the defects manifested them earlier, in others later.
That Apple is using a time limit for the free repair is not right because the manifestation of the problem is usage dependant - those who used their iMac little (and the problem appears late) are being penalized. The correct way would have been to recall and repair all of the affected iMacs or put no time limit on the free repair.

Hello All,
I agree as well. My iMac G5 would not power up on Saturday morning. I bought it in Feb. 2005. I had the logic board and power supply replaced in May 2006. My apple care ran out in Feb of this year. Still, I called Apple, thinking perhaps something could be done.
The tech was very, very nice, and talked with his supervisor three times to see if perhaps I could get some kind of discount on a new computer. No go. And he explained that Apple is no longer making the old logic boards, they have to be made special, etc. I do feel a little cheated, since they replaced the logic board with one that had the same problems (opened it up--bulging capacitors with the cross mark on them). Well, it lasted two years after that, but we are not hard on our computers, and now I wish I'd have been less cautious with it. Maybe it would have died two months sooner when I still had Applecare!
Nevertheless, I still went out and bought a new iMac 24 in. 2.8 with 4 GB ram and a new Airport Extreme Base Station (Apple products are still the best I've ever used). I'm going to wait awhile to get Apple Care--to extend my coverage time as long as possible, since even a couple months would have helped in my situation.
Good luck to all you G5 owners. And thanks to all the people in the G5 forums that have been so helpful in the past. And Back-up often--you'll be glad you did.
Dawn

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

ITunes sync to Z10 = not right working / mixed songs in wrong playlists

Hi
iam totally frustrated:
I try several weeks since i have this great device, to sync my itunes music to z10.
But on syncing thru BB Link, my playlists on z10 are totally mixed with the wrong music files.
On itunes = all is fine sorted
Transfered to Z10 = some music is not shown in their playlist or playlists are together in one.
So syncing is not right working. Horrible
Combination:
iTunes + Mac
Z10 with 64GB card -> fromatted inside Z10 (several times)
So iam not able to get my music with right playlists to the Z10.
whats wrong here?
I never experienced with such problems on iPhone or Android based Phones.
Blackberry! Please fix that!

Hey uhscale,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
We are going to need to gather some BlackBerry Link logs to find out why the playlists are mismatching. Please contact your network service provider and ask to be transferred to BlackBerry so we can investigate these logs.
Thank you.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Is there a separate download for iMac. I bought and downloaded what I thought was the right download but it is not working and feel it might be a windows version. How doe I get it right

s there a separate download for iMac. I bought and downloaded what I thought was the right download but not working and feel it might be a windows version. How doe I get it right

Check the link below for requirements and instructions for upgrading to Snow Leopard (10.6)
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Sapscript Justified, Not left-justified, not right-justified, but Justified

Similar Messages

Maybe you are looking for