SAPscript not being printed - Error in OPEN_FORM for document 400....

Hi all,
I'm facing the following problem, I want to print a sapscript from ME22N, so I go to messages, create the output, I make the settings I need, in communication method I check print immediately, and put local printer, etc. In Further data, i choose "Send immediately (when saving the application)" But when I save i get this: Error in OPEN_FORM for document 4500002909
The program is a standard one: SAPFM06P and the form is Z. The output type is NEU. I don't know for sure if it's something regarding the ABAP or it is a customizing issue.
Please help me!
Regards,
Matias

Nick,
Yes, that is the message number. But I cannot debug the OPEN_FORM because I can't make it stop. I setted a breakpoint in routine ENTRY_NEU, but it is not stopping when I press the save button. The only way I can make it stop there is when I press "print preview", but that is not hepling me.
I can see it from "print preview" but I need to use the messages, and that is not working.
I don't think it's the sapscript, because it is happening with other sapscripts too. And it is working in production environment.
I really thank you.
Regards
Edited by: Matias Catanzariti on Jan 15, 2010 6:29 PM

Similar Messages

Error: Error in OPEN_FORM for document '123456789' in ME9A(print preview)

Hello Experts,
I am encountering an error when I try to print preview my RFQ form via ME9A. What
I did was to just copy the existing custom form to my own custom form then assign my form
to our output type via NACE transaction. So when I click the display message button in
ME9A, ther eis an error saying 'Error in OPEN_FORM for document...'
What maybe the cause for this? Hope you can help out guys. Thank you and take care!

HI,
Specify the print program name in the script form. To specify the program in script form Form->Check->Texts->Select all->ok->Enter the Print Program Name and try.
This might be the problem.
Regards,
Saran

Error in OPEN_FORM for document 46000000001

Hi experts,
I have created a custom PO smartform and Custom print program. I have configured the same in the NACE tcode also. When i try to print out the PO from ME23N tcode, i am getting this error "Error in OPEN_FORM for document 46000000001". But I'm able to down the form into my system. I have also checked with the basis regarding the printer setting. Everything is fine.
But it is not printing.
Please help.
Thanks

Hi
Scripts calls are nothing but open_form, write_form, close_form...all these should be commented as there are not required in the print program for a smartform.
All you need is SSF_FUNCTION_MODULE_NAME, and to that pass on the Smartform generated Fm...for example code...search in SCN with search term ssf_function_module_name.....
Vishwa.

Error in OPEN_FORM for document 4500000040

Hi,
while posting the PO in ME22N, we are getting Error in OPEN_FORM for document 4500000040. Is this problem with the smartforms?
how to debug the smartforms?
regards
Gokul

hi gokul,
...<b> i think as per u r settings u r using the driver program to trigger SAPScript... u r passing the SMARTFORM name to the OPEN_FORM</b>
but the OPEN_FORM is used to call the Scripts
first check the NACE configuration for the out put type u ra using give correct driver program and SMARTFORM name. if u r sure about u r print program name then give the correct FORM ROutine..in NACE.
to call the SMARTFORMs u have call the
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = 'zxxxsmartformname'
    IMPORTING
      fm_name            = fp_v_fm_name
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc <> 0.
    MESSAGE e107 WITH fp_c_formname.
ENDIF.
CALL FUNCTION fp_v_fm_name
    EXPORTING
      archive_index      = toa_dara
      archive_parameters = arc_params
      control_parameters = fp_st_control_parameters
      user_settings      = space
      output_options     = fp_st_output_options
      wa_vbdkr           = fp_st_vbdkr
    IMPORTING
      job_output_info    = l_it_ssfcrescl
      job_output_options = l_it_ssfcresop
    TABLES
      it_item            = fp_it_item_final
    EXCEPTIONS
      formatting_error   = 1
      internal_error     = 2
      send_error         = 3
      user_canceled      = 4
      OTHERS             = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

Error in OPEN_FORM for document 6000000078

Hi Guys,
I'm experiencing an error : Error in OPEN_FORM for document 6000000078.
This form is an enhanced form for RFQ and an enhanced print program ZSAPFM06P.
What would be the possible cause of this error and how could I avoid this error?
Please guide me on what to do.
<REMOVED BY MODERATOR>
Thanks in advance!
Reymar
Edited by: Alvaro Tejada Galindo on Jun 25, 2008 3:42 PM

Hi Ytamar,
Thanks for that.
However, when I changed the Print Prog and Form to the standard ones, the error did not pop out.
Do I miss something here?
Thanks again!
Edited by: Reymar Ellazo on Jun 26, 2008 4:39 AM

Error in OPEN_FORM for document ..............

Hi,
Pls help me out. I go to me22n and create an o/p type zpea. When I try processing that using me9f i.e when I select the o/p type and click on dispaly message I get an error saying Error in OPEN_FORM for document so and so. I'm not able to trace why is this message..........Pls reply

Hi Chesat,
If nace is fine & your program name is also specified in nace then everything is ok. It may be possible that there may be something missing in output confuguraion. One more thing are u testing the script in same client or in different client?
Ashven

Error in open_form for document in ME21n Transaction for pring preview

Hi,
While creating a PO using ME21N. Ifi click on Print Preview Button,the following error is coming "<b>Error in OPEN_FORM for document *********** "</b>This PO output type is "Fax".
This only happens for output type "Fax". For Output type "Print", preview works fine.
Same program is used for fax and print in configuration(NACE).
Please help me out in this.
Regards,
Kishore

Hi Krishna,
It is possible to check the print preview of the document with FAX as output.
Please put a break-point in your progarm and check it.

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster.

Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).

Why am I getting these errors Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).
== URL of affected sites ==
http://

HOW DO YOU SET THIS??? I'M FRUSTRATED OVER THIS. ITS BEEN 2 MONTHS SINCE I HAVE BEEN ABLE TO PLAY ANY GAMES IN FACEBOOK DUE TO THIS PROBLEM! IT DOES NOT MATTER WHAT BROWSER I USE I STILL GET THIS SAME MESSAGE.

Warning: Could not find the customization level value for document

Hi All,
I am trying to upload the translation for one of the page at responsibility level.
I am getting following warning when running the below command.
java oracle.jrad.tools.trans.imp.XLIFFImporter $APPL_TOP/xmci/12.0.0/fr-CA/Translated/ARIACCTDETAILSPAGE.xlf -username apps -password apps -dbconnection "$AD_APPS_JDBC_URL"
Warning: Could not find the customization level value for document "/oracle/apps/ar/irec/accountDetails/webui/customizations/responsibility/51688/ARIACCTDETAILSPAGE".
The same is working fine if the translation is for some attribute at site or function level.
Did anyone faced this kind of issue.
Thanks,
Anoop

Anoop,
I am sure you would have verified the responsibility id in the target instance is 51688(may be source instance your resp id is 51688 and in target it is different).
Have a look at this below notes, it might help.
1077267.1 - Unable To Move Resp Level OA Personalization From 1 Env To Another
848851.1 - Attempting To Upload XML File Generates Error: Could not find the customization level value for document
Thanks.
With Regards,
Kali.
OSSI.

"Error loading BASIC for document" while saving (solved)

In case someone else has this problem here's my solution.
I have a network (Netware 6.5) installation of SO7 (WinXP and 98).
My PC's have harddrives that are protected by Deep Freeze.
I start the Quickstart from a Run entry in the registry.
Starting with PU5, the first time I save a document I get 10-15 "Error loading BASIC for document...". After clicking OK on all those the document is saved and everything works fine. If I close SO and and reopen it everything works.
Rebooting the PC and trying to save a document gives me the error again (since Deep Freeze reset whatever change was made when I clicked through the error messages).
After some hours of debugging I noticed that when the quickstart icon pops up in the systray a new directory named __basic_60 is created in the user directory of the client installation. Removing that prior to starting Write or Calc made the saving error dissappear.
My workaround solution is to remove the gid_Procedure_Rename_Basicdir procedure and it's reference in gid_Module_Root in instdb.inf that's located in the program directory of my network install.
However it must be a bug that the __basic_60 directory isn't removed as default, right?
- Peder

Dusty wrote:I deleted ~/.openoffice2 and it fixed the issue on reconfiguring it.
If deleting the .openoffice.org2 directory is a bit drastic for you, you can fix the problem by going into ~/.openoffice.org2/user/basic and editing the dialog.xlc and script.xlc files. You need to remove the line at the end that says WebWizard in both these files.
That will get rid of the two error messages you are likely getting.
Btw, anyone else miss the Projects functionality in Kate? Darn stupid sessions. Oh well...

Acrobat X Pro shows "The document could not be printed" error

I used Acrobat X Pro to open an PDF file and then re-print it to another PDF by Adobe PDF printer. It shown a dialog with "The document could not be printed" message.
Why do some PDF files occur this error ? How to fix this problem ? Thanks.

Hi,
Thanks for reporting the problem.
It seems you are unable to print any pdf from Acrobat. You mentioned that you are able to print the same PDFs from iphone and other devices.
Are you able to print from any other application(e.g. word, notepad) from the same machine where you are seeing the issue. It looks to me that your machine is not able to establish contact with the printer but your other devices are able to.
Please confirm.
Thanks,
Atul

"DLBKGF.DLL was not found" printing error

I have tried to print downloaded Adobe Reader XI documents as well as (earlier this summer) Adobe Acrobat downloaded documents on my trial subscription, but in all cases, I have gotten the message, "This application has failed to start because DLBKGF.DLL was not found. Reinstalling the application may fix this problem." However, I have/had tried uninstalling and reinstalling both programs and have/had continued to receive the same error messages. I read on this forum that updating one's printer driver might solve this issue, but when I did this about a year ago with my Dell A920, it caused compatibility problems with other, older software of mine and I was advised to uninstall the updated driver and reinstall the original version, which I did.
How would you recommend I resolve this? Thanks!

DLBKGF.DLL is part of your printer driver; you need to reinstall it (either the latest version, or an old version if you wish).

WHT Error - Business Place for document could not be determined

Hi Gurus,
I am getting error while creating remitance challan " Message no. 8I707 - Business Place for document could not be determined "I have check all the configuration related to business place, section code and remittance challan number range and it seems ok.
would request you to help me to workout this issue.
Regards,
Rahane D

Hi,
Please refer to this SAP note to find out the exact error in J1INCHLN
SAP Note 1465529 - CONSULTING NOTE FOR J1INCHLN
In addition to this please refer to the following link in case you find out that the posted documents have missing Business place updated..
Re: Subsequent implentation of EWT (Challan and Certificate)
Regards,
SAPFICO

Images are not being display in people search for few users - why ?

Hello,
In my farm, users having profile picture in UPSA and they are able to see in My Profile page as well.
However when I find user in People search - images are not being display for few users while for others it works.
I have checked picture property which is indexed and then I run full crawl still its same issue.
Following are the settings for Picture Property - would you please let me know why its still not being display in people search ?
Dipti Chhatrapati

Dipti,
Hope below urls will help you,
https://littletalk.wordpress.com/2010/12/10/people-search-result-doesnt-have-images-in-sharepoint-2010/
https://social.technet.microsoft.com/Forums/office/en-US/eea8aa10-4565-41bf-98ec-dc93fb600021/some-users-pictures-are-not-showing-in-people-and-groups-but-are-viewable-in-the-thumbnail-and-my?forum=sharepointgeneralprevious
http://westerdale.biz/sharepoint-2010/display-active-directory-profile-thumbnail-photo-and-other-attributes-in-sharepoint-2010?doing_wp_cron=1421939809.4895009994506835937500
Sudip
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

SAPscript not being printed - Error in OPEN_FORM for document 400....

Similar Messages

Maybe you are looking for