SapScript - Polish fonts without Polish logon language installed

Hi,
(the problem regards any languages with non-standard fonts e.g. cyrilic)
How to insert Polish fonts in SAPscript being logged in English - there is no Polish logon language installed on the system.
When editing Polish version of the form and entering Polish fonts (directly or by copy/paste) only "bushes" are displayed.
Is it possible to edit SAPscript form in different language version than logon language - I mean to obtain fonts specific for the form language?

Hi
Yes it is!
The language used by sapscript doesn't depend on logon language, but it is that you transfer to fm OPEN_FORM, but your sapscript have to be translated in that language. If there isn't a versione in the language the system run the version in original language.
Max

Similar Messages

I do not see polish fonts in Titler

Hey,
I just installed Premiere Pro CS5 on my computer with Window7 os. When creating titles I do not see polish fonts in spite I know they are there. I have also installed WebPremium CS4 on the same computer and there are no any problem with polish fonts. ANy suggestion where to find them or what to do to use my national fonts???

Is a font so mysterius nobody can help me. Just to be clear: my polish fonts ( there are only few like ą, ę, ń, ć, ś, ó, ł,ź and ż) I usually get with right Alt. NOrmally in all other Adobe or Microsoft or any other programs it works. One exception is Premiere Pro. One of the local portal suggest to use shift+tylda+letter (example: shift+~+s=ś). But this is completetly crazy way. May any Adobe expert help me somehow ??????????

[SOLVED] Problem with Polish font

Hi!
I never had this problem before.
Lately I installed Arch and for some reason I have problems with Polish fonts.
Now google chrome (AUR) and Konsole have no pl chars at all.
Konqueror and KWrite (yes, I'm using KDE) are using some kind of unnatural Polish characters.
Here you can see how does it look like:
Konqueror
Google Chrome
Konsole
KWrite
Additional info:
$ locale
LANG=en_GB.ISO-8859-1
LC_CTYPE="en_GB.ISO-8859-1"
LC_NUMERIC="en_GB.ISO-8859-1"
LC_TIME="en_GB.ISO-8859-1"
LC_COLLATE="en_GB.ISO-8859-1"
LC_MONETARY="en_GB.ISO-8859-1"
LC_MESSAGES="en_GB.ISO-8859-1"
LC_PAPER="en_GB.ISO-8859-1"
LC_NAME="en_GB.ISO-8859-1"
LC_ADDRESS="en_GB.ISO-8859-1"
LC_TELEPHONE="en_GB.ISO-8859-1"
LC_MEASUREMENT="en_GB.ISO-8859-1"
LC_IDENTIFICATION="en_GB.ISO-8859-1"
LC_ALL=
$ locale -a
C
en_GB
en_GB.iso88591
en_GB.utf8
pl_PL
pl_PL.iso88592
pl_PL.utf8
polish
POSIX
$ showconsolefont
bug: getfont called with count<256
! " # $ % & ' ( ) * + , - . / 0
1 2 3 4 5 6 7 8 9 : ; < = > ? @
A B C D E F G H I J K L M N O P
Q R S T U V W X Y Z [ \ ] ^ _ `
! " # $ % & ' ( ) * + , - . / 0
1 2 3 4 5 6 7 8 9 : ; < = > ? @
A B C D E F G H I J K L M N O P
Q R S T U V W X Y Z [ \ ] ^ _ `
! " # $ % & ' ( ) * + , - . / 0
1 2 3 4 5 6 7 8 9 : ; < = > ? @
A B C D E F G H I J K L M N O P
Q R S T U V W X Y Z [ \ ] ^ _ `
! " # $ % & ' ( ) * + , - . / 0
1 2 3 4 5 6 7 8 9 : ; < = > ? @
A B C D E F G H I J K L M N O P
Q R S T U V W X Y Z [ \ ] ^ _ `
Solution:
Just install ttf-microsoft-fonts from AUR.
Last edited by Skitter (2013-10-08 16:04:08)

Well now I have Polish characters in terminal but the problem with Google Chrome, KWrite and Konqueror remains unsolved.
Thank you Karol.
Everything is set up the way it should:
locale
LANG=pl_PL.UTF-8
LC_CTYPE="pl_PL.UTF-8"
LC_NUMERIC="pl_PL.UTF-8"
LC_TIME="pl_PL.UTF-8"
LC_COLLATE="pl_PL.UTF-8"
LC_MONETARY="pl_PL.UTF-8"
LC_MESSAGES="pl_PL.UTF-8"
LC_PAPER="pl_PL.UTF-8"
LC_NAME="pl_PL.UTF-8"
LC_ADDRESS="pl_PL.UTF-8"
LC_TELEPHONE="pl_PL.UTF-8"
LC_MEASUREMENT="pl_PL.UTF-8"
LC_IDENTIFICATION="pl_PL.UTF-8"
LC_ALL=
Strange because when I'm typing in the address bar Polish chars are appearing properly however site content and google search are still displaying this unrecognized chars.
Address bar
Google search
Last edited by Skitter (2013-10-07 17:25:56)

FM 9 .pdf creation errors using polish fonts.

I have a problem with FM9 which cannot create a
correct .pdf when a polish font is used. When a book is created and has to be saved as a .pdf it is missing some text in the .pdf that is in the book. Furthermore some of the font are not displayed correctly in the .pdf file bookmarks (It shows some of the letters corretly and the put a ' ³ ' next to some letters and in the middle of a word).
I have already tried to use the 'print as .pdf' function and Distiller and PDFCreator both generates the same wrong result.
Any suggestions are most welcome...
/morten

Hi,
I believe its becaouse of teh font you have used originally in those specific module that are having error:
you can try updating to a add-on for PDF output generation that would be available in the Disk of Framemaker you would have If its a Part of suite it would be in
C:\Documents and Settings\ankupand\Desktop\setup\TCS2\Release\Disk1\Adobe FrameMaker\Adobe FrameMaker Dependency\payloads\AdobePDFL9-mul
to path would be a little modified for you depeding on the location and the Product being a Point Product or Suite.....
Hopefully it would help.
Thanks,
Anjaneai

Can I view the repertoire for fonts without installing them?

I want to be able to compare the full repertoire (all the characters) in fonts without installing them in my system. As far as I can tell there is no way to do this in font book. Please let me know if there is a way.
FYI - The reason I want to do this is that I am trying to compare different versions of the same font with different character support (eg. Latin 1 vs WGL). At the moment I keep having to delete and then reinstall the font, which isn't great.

Font pilot seems to only show the first 256 characters so that's not useful.
Font forge = massively painful to install
Fontlab = $600
Both have 100 times more features than I actually need.
When I install the same font as one that is already installed using font book it doesn't create multiple instances. It must over write. It's hard to know what it's doing actually because it behaves in a buggy way, it doesn't seem to refresh the information at first, but if I quit and check again then the character set changes. I can't really trust what I'm looking at.
I guess I'll probably just persevere with the font forge installation instructions. (why doesn't somebody just package up an installer for it?)

Export ePUB from inDesign CS6 - polish fonts problem

I have to make ePUB with polish fonts.
I create a simple one page document in inDesign CS6 and export it to ePUB. All fonts are embedded.
When I check it in Adobe Digital Editions (ADE) there is problem with polish fonts (ż, ł). ADE doesn't read it correctly. Other readers do it in right way.
Is it a problem with inDesign or ADE?

The ADE provides a preview, and nothing more than that. Actual viewers have other, more, or less capabilities -- some don't support embedded fonts, others do but with limitations, etc.
ComrelPL wrote:
.. that's why bookstores need ePUB to be compatibile with this ADE.
E-Pub is still in its infancy. There is no general "e-pub" standard that *all* viewers are compatible with, other than the very lowest common denominator (which may very well mean "plain text").

Deploying/setting fonts without installing them?

I have a TrueType font file, but I want to deploy it with my JAR file. Is it possible to include the font in my JAR, use Class.getResource() to get the font file's URL and somehow load it into my program? I know that all my clients will be using Windows, but I don't want to have to put my font file into C:/Windows/Fonts to be able to use it. Is there a way I can do this?

Font pilot seems to only show the first 256 characters so that's not useful.
Font forge = massively painful to install
Fontlab = $600
Both have 100 times more features than I actually need.
When I install the same font as one that is already installed using font book it doesn't create multiple instances. It must over write. It's hard to know what it's doing actually because it behaves in a buggy way, it doesn't seem to refresh the information at first, but if I quit and check again then the character set changes. I can't really trust what I'm looking at.
I guess I'll probably just persevere with the font forge installation instructions. (why doesn't somebody just package up an installer for it?)

SAP CRM to ECC - SSO Configuration - Logon Language Setup

Hi All,
I am a BASIS consultant currently handling one CRM project. I need a help in configuring SSO between CRM and ECC. Now SSO is not configured, so When I click on the External Link created in CRM calling an ECC transaction, it requests for Client/UserID/Password/LogonLang for the ECC system. Here it takes Logon Language as same as what I have logged in CRM. Hope once SSO configured it will check only for the userID and log into ECC without requesting any further details. But the issue here is we are planning to have additional languages in CRM but not in ECC. So whenenver user logs in CRM with language other than EN - english (eg. FR), and when tried to login to ECC with the external link from CRM, by default ECC login needs to be logged in with language EN, as FR will not be available in ECC. I do not find any logon language configuration in SSO, how can we achieve this, logging into language FR in CRM, logging in EN when clicking External ECC link? Configuring Logon Data defaults (in SU01) in ECC, restricting to logon language EN, will not help I hope. Please advise.
Thanks in advance.
Regards,
Shahul

Hi Srikishan,
Thanks for the response. When user from CRM logged in another language than EN for eg. FR, clicks on external link in CRM, takes to EN, only if that language FR is not installed in ECC, else it will take to the same language in which CRM user logged in. This cannot be controlled in SSO configuration. Is this correct?
In case if FR is installed in both the systems, ie CRM and ECC, but user wants to log only to EN when clicked the external link(to ECC) from CRM, how we can configure this, Is any parameter can control or SSO setup configuration available? Please advice.
Regards,
Shahul Hameed

SAPScript Korean font convert to PDF , font cannot read

Hello everyone
i use SAPscript original language EN.
in sapscript i use korean font KPBATANG to show detail of Purchase order,
some korean text come from SAP table , some korean text i hardcode in sapscript.
but when i convert SAPscript to PDF for sending file vie email.
all korean font cannot read, but english font is OK.
i attach picture as below.
http://www.flickr.com/photos/53547794@N06/4966797778/
you will see that korean font in ( ) cannot read
please help.
Edited by: dittaporn nanasilp on Sep 7, 2010 6:43 AM

Hi,
In addition to Korean font like KPBATANG, the language key of the used form(sapscript or smartform) must be KO. Also the PDF must be created by a Korean device type like e.g. KPSAPWIN.
If you have a Unicode system, then the Unicode cascading fonts device type SWINCF or PDFUC can be used to create the PDF. In this case the language of the form is not so important.
Regards,
Aidan

[GNOME 3] how can I change specific font for a specific language?

Hello Community,
I would like to know if its possible to specify a font according to its language...
more specifically on CJK fonts (Chinese, Japanese, Korean)
so far I'm able to globally install a font by
grabbing a *.ttf (and *.otf) file and moving it to the /usr/share/fonts/(designated folder according to *.filetype)
i dont like how the default font for the CJK languages and I would like to change it so...
any idea how?
THANKS IN ADVANCE ^_^

i installed the font manually and not using pacman nor aur packages.... i downloaded an *.ttf (and *.otf) files and move them to /usr/share/fonts/TTF using nautilus...
i couldnt figure where to configure them... i was able to configure it on firefox using about:config but the system itself... i didnt know how...
for some reason though when i resetted my laptop... the newly installed japanese font was able to applied in the system... it's solve but i have no clue how it fixed itself...
anyways thanks for the help @karol
http://i.imgur.com/r2HYahC.png
Moderator edit [ewaller] Changed img tags for over sized picture to url tags. Consider using thumbnails https://wiki.archlinux.org/index.php/Fo … s_and_Code
Last edited by ewaller (2014-04-20 15:11:09)

How to format my computer without affecting the software installed?

how do I format my computer without affecting the software installed?

You can, but if you don't format the drive using the Zero Data option all your personal files will still be accessible to someone who knows how to gain access to them. If that's not a concern then here are two options (easy and not so easy):
The Easy Way
1. First, boot from your Tiger DVD, select your language and click on the Continue button, then select Disk Utility from the Utilities menu, select your boot hard drive, go to the First Aid tab, and click the button for Repair Disk. Repeat this until no trouble is found. Then click on the Repair Permissions button. Then quit DU, return to the installer and shutdown the computer for a couple of minutes.
This will assure that the drive is OK and permissions are OK.
2. Next, boot to single user mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
3. At the prompt, type the following commands pressing return after each command line:
/sbin/fsck -yf
mount -uw /
rm /private/var/db/.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when you reboot, it will send you to the startup wizard where you can start a new user without reinstalling.
The Not So Easy Way
Follow these instructions step by step to prepare a Mac for sale:
First, back up the data:
1) Shut down all Virtual PCs. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
2) Clone to an external drive using Carbon Copy Cloner.
Next, prepare the machine for the new buyer:
3) Deauthorize the computer in iTunes! Deauthorize both iTunes and Audible accounts.
4) Remove Open Firmware passwords
5) Turn the brightness full up and volume nearly so.
Install a fresh OS:
6) Insert the OS X install CD/DVD.
7) Restart the computer while holding down the C key to boot from the CD/DVD.
8) Run Disk Utility from the file menu and erase the internal hard drive (optionally zero all data).
9) Install OS X.
10) Reboot the computer.
11) From the welcome screen, you can skip the registration step by typing command-Q.
12) When prompted, create an account (it will be an admin account).
13) From your new admin account, configure networking.
14) Then use Software Update to bring your system and all of it's applications up to date.
15) From Disk Utility, repair permissions on the new volume.
Now delete the account you just created:
16) Boot from a different volume (e.g. a firewire drive, if available)
17) Clean up the image using the following terminal commands:
prompt> rm /Volumes/<imagevol>/var/db/BootCache.playlist
prompt> rm /Volumes/<imagevol>/var/db/volinfo.database
prompt> rm -r /Volumes/<imagevol>/var/vm/swap*
18) Now you can get rid of the admin account you used to set up the machine Use the terminal:
prompt> nicl -raw /Volumes/<imagevol>/var/db/netinfo/local.nidb -delete /users/<admin>
prompt> rm -r /Volumes/<imagevol>/Users/<admin>
prompt> rm /Volumes/<imagevol>/var/db/.AppleSetupDone
19) Shut down and ship it to your buyer. When they get it, it will boot to the Welcome screen just like a factory Mac, except that it's better because it's completely up to date.

Why, when you have auto update on, isn't the same language installed as before, but English instead.

When auto update the new version installed is English and different from the original language installed. Probably the same thing happens with thunderbird. When I have a language installed I want an update in the same language without having to reinstall the wanted language.

I already thought of that but it can't be the way it is suppossed to be. Firefox, and Thunderbird, offer an auto update function so the update automatically sould be in the same language and not in English as it does now. Downloading and installing your own language you can hardly call auto update.
For now I have stopped auto update till a solution is presented.

MII ignores SAP ERP logon language settings

Hi everybody,
I have currently a problem with the logon language of MII (to sap erp).
I call a function module with rfc and I get standard error messages in englisch which is not really a problem for me but the messages are saved and a user has to look at them.
What I did: I changed the logon language in MII SAP server editor to "DE" but the messages are still in english. If I call the function module direct in SAP with my user with the german logon language the error messages are saved in the german language.
Thanks for your help.
Regards,
Matthias

Michael,
yes they are set to DE (we tried it also without an language setting - default of our SAP system is DE).
The BAPI_MESSAGE_GETDETAIL helps us a lot, thank you for that, but it is not very nice. We don't need it in a different language we always want it in the german language.
As a workaround we will now ask if sy-langu = 'E' call BAPI_MESSAGE_GETDETAIL in our function module with language 'DE'. That is not really nice but it works.
So if you have another idea what there could be wrong it would be glad to hear from you.
Regards,
Matthias

Which font supported in Arabic language

Hi There,
Can somebody please suggest me how to develop Arabic language course. witch font support in this language. i am using captivate 6.
Looking forward for help.
Thanks,
Srikanth

Language support is outside of Captivate. As long as you have the font installed in your system, it will work in Captivate.
Sreekanth

BW Report Language differs EP Logon Language

Hi,
I am using a Portal BW Report iview.
The Portal Logon Language is German ("DE")
SAPSSO2 is used for Single Sign On.
The iview BW Report Language is set to
"sap-language=EN&bsplanguage=EN&..." (BEx Query part)
But the SAP BW system displays the report in "DE" (German, i.e. all english Texts are missing)
In the sniffer trace, I can see that the initial http request is done with "sap-language=DE&.."
Any idea is welcome

We had an Open SAP Call regarding the same issues.
Sap Support suggested to us to implement SPS11 on the BI System to get this solved.They will allow to overwrite the language via query string in SP11 (which also means that you can overwrite it via the respective iView property).
Feedback From SAP Support:
Please understand that SPS11 is a prerequisite for providing this new functionality and we won't be able to downport it to a lower SPS.
Hope this helps.
Regards
Volker

SapScript - Polish fonts without Polish logon language installed

Similar Messages

Maybe you are looking for