Sapscript print a extra page

Hi expert,
now i'm confused about a sapscript problem. The device program of this form is a standard SAP program SAPF130D, the issue is when i print it, the result will be two page, the second page does not have any data except for the header details. even if we don't print any content in the main window,the second page is also be printed. and i have checked the form, there are not any comand like 'new page'. Is there anyone have any idea to share.
will appreciate your reply, thank you!!!

This may have several reasons, but quite likeley it is a blank line beeing printed in main window not fitting in page1.
The according paragraph format has not tagged the option "no empty lines".
at least that would make him print a second page without seeing anything on the main window in the output.

Similar Messages

  • Cheque printing form always prints an extra page...

    Hello Experts,
    I have a custom form the cheque printing program RFFOUS_C. Now, my problem is that it
    always prints an extra page even though the MAIN page doesnt have any line items. So instead of
    expecting only 1 page it always shows 2 pages. And the worst thing here is that they I cannot customize
    the standard program since it is the client's rule.
    Any of you have encountered this problem before?

    Hi,
    in your Form there is only One Page created?
    just check if  there exists any other page and in the Standard attributes of the page in "Next Page", the other page is set.
    Ideally there should not be any page as the Next Page.

  • Check print program prints an extra page...

    Hello Experts,
    I have a dillema here wherein I cannot customize the standard check print program RFFOUS_C. When I check
    the spool, it always prints an extra page even though the prior page does not overflow. I also do not
    have any explicit NEW-PAGE or related code.
    Have you guys encountered this?

    Hi,
    1. Go to SM37 and check the Job log, is there any other program is triggering.You need to check the FBZP, for is there any other form is configured.
    2.In the selection-screen you need to make sample printouts as zero.
    Regards,

  • SAPScript - Print Preview 2 Pages - Physical Print overlap as 1 Page

    HI Experts,
    I have a problem with Invoice SAPScript Printing - where the print preview is good with 2 Pages,
    But when it physical prints out - Only 1 page and overlapping the Second page content to the first.
    Any idea where did I miss out?
    Thank you in Advance.
    Regards,
    CWLIM

    HI ,
    Sheelesh  is right.
    I had both SAPScript and Smartform issue with the overlapping printing.
    What you need to do is to check your page format to see if it is the correct size for the specific printer.
    If it is too big for the printer paper size - it will overlap the printing as 1 page.
    For example : A4 Lanscape printing on normal HP Laser Printer - DINA4 Landscape should be used.
    Or at least when you define your own page format - refer to the correct size and orientation.
    HOpe this helps.
    Thank you all

  • Prints an extra page with message

    Every time I print I get an extra page. I'm only prinitng one doucment and I get a second page with the following message:
    userdict/ESPW1{}bind put
    Can someone help make this stop?

    No the printer does not. I was finally able to solve the problem:
    1. The X driver will not download at all from Minolta's site on the Mac Pro using firefox or safari as its a .gz file.
    http://printer.konicaminolta.com/support/current_printers/pp1250e_sup.htm
    2. Found another link to download from Minolta. Installer would not work - it quit with an error - Minolta site says 10.2 or later - using 10.7.4 so maybe not.
    http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=987&fil etypeid=5
    3. Found this link instead:
    http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productname=macin tosh%201250e
    Needed to download Unstuffit for Mac to open this file as Mac Pro would not uncompress this file.
    4. Needed to manually install the uncompressed text file "PagePro 1250E" (from #3 above) at the following location to make the error go away:
    Library/Printers/PPDs/Contents/Resources/PagePro%201250E

  • Network printer doing extra pages

    I just installed a network printer (NEC Superscript 1800 duplexing laser))
    its hanging off a SMC 7004AWBR router (just used as a hub/print server)
    I'm getting 2 extra pages with each print.  One blank then one with type
    Giant letters made of the letter its making, like the *old* baner printers of the 70's & 80's.  Its definetly orignating from the Mac since its the account name and computer name and in normal type:
    lpd: job Trailer
    Date:      <no date>
    Doesn't happen in Windoze.

    Hello-
    Do you see this when you do a print preview also ?
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    Donald

  • Invoice print extra page w/o any data in repetitive area or end of report

    I did not use Page Footer and reduced those "hidden fielded" height to 26 with checkmark for Adjust Area Height, but the invoice will print extra page with blank repetitive area and page footer, Report Header and Repetitive Header showed.
    How to remove the extra page?  
    I have another one that do not print the extra page but each page has same Invoice Total, Frt, Tax with Remittance Address that should only show in the last page.  I know this is because I put Invoice Total in Page Footer. When I remove Page Footer to End of Report area then I got extra page with no data in repetitive area or end of report.

    Hi Lily,
    i think problem be create in Repetetive Area.
    Do this in your PLD,
    ->> Open your PLD and save as a duplicate PLD (Just testing PLD).
    ->> Right Click in PLD and Choose the Display Hidden Fields in PLD.
    ->> Reduce the Height of all fields in Repetetive Area, Page Header and End of Reports.
    for example,
    ->> Select all fields including Hidden fields in Repetetive Area & Repetetive Area Footer and
    Reduce the Height in General tab on Properties Widnow.
    put the Height -> 15 and Font Size -> 10
    ->> Reduce the Repetetive Area Height and put the Tick mark in Area Height Adjustment in Format Tab.
    Try to remove all fieds(including Hidden fields) in Page Footer and Reduce the Height.
    ex. Page Footer Height -> 0
    Regards,
    Madhan.

  • Lion address book prints extra page

    For years I had no trouble printing envelopes straight from Address book. But since I upgraded to Lion, when I print an envelope, it prints (1) the envelope just fine, but then also (2) a blank 8.5"x11" page. How do I get it to stop printing the extra page?

    HP printers for years have had a problem printing an extra envelope from the Apple Addressbook Application with the # 10 envelope.
    Solution: Select a #9  envelop.  This prints about the same size and does not have an extra envelope.
    How to: From Address book, select print, Style: Envelopes, Layout: Layout pulldown Official 9 then print
    Interestingly the two smaller and two larger sizes only print one envelope. You can test this by clicking pdf and open pdf in preview.
    On System 7.4 I cannot find a way to change the orientation to verticle as described above.
    I have told Apple.

  • HP 5500 Extra page printing?

    Have am HP 5500 networked printer spitting out an extra page after print jobs, has been going on for about a month now.  It does this about 3/5 print jobs.  When a user sends a document whether multi paged or not, it will print the job then prints an extra page saying
    JOB STORAGE STATUS PAGE
    Error: Unable to store job at printer
    Reason: Printer not configured to collate
    Solution: Install an EIO hard disk.
    There is already 176 Mb or RAM installed along with a 81 RAM disk.
    Ive tried turning off job storage, with no luck and turning it back on.  I already did a firmware update and its still printing extra page.  The printer is set to spool from the server.  Did RAM check with no errors. 
    Running out of ideas, any input would be greatly appreciated. Thanks .

    I am getting the same error on haevy graphic prints did you find a solution

  • Print unreadable characters and extra pages on Xerox 3050

    We only have a Xerox 3050 Printer. Jetform server has setup it as Default printer. We have compiled our forms with 'Window default print driver' option. When merging DAT file into this printer, it printed most correct information but with some unreadable characters and also printed some extra pages with totally unreadable characters.
    For the same forms, we have also compiled with PDF driver. When merging the same DAT files into the PDF files, they showed and printed correctly.
    Is Xerox 3050 printer driver not supported by Jetform server, or other reasons?
    Thanks in advance.

    Hi AngeloC, and a warm welcome to the forums!
    I've seen this before, now let's see if I remember the cure!
    Safe Boot from the HD, (holding Shift key down at bootup), this will clear the font caches for one thing, then run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Reboot.

  • Okidata printer timeout prints extra page after each job

    After updating to Yosemite, I get the following problem.  When printing to my Okidata C331dn, everything seems fine, but about 25-30 seconds later, I get an extra page printed with the following:
    ERROR:  timeout
    OFFENDING COMMAND:  timeout
    STACK:
    This happens every time I print.  I am using the Mavericks drivers via USB (Oki has not updated their drivers, yet).
    Any ideas on how to stop this?  I am wasting a lot of paper!

    Hi,
    I have had the same problem with an Oki MC560 color NETWORK printer, after upgrading my Macbook to Yosemite.
    Now it seem solved after changing the printer network setting "IEEE802.1X" from "NO" to "YES"
    (I don't know why !).
    Now, after each printing, the printer remain "active" for some minutes, with "Data" led blinking as it should print something else,
    and then it goes in standby (without printing the extra page with timeout error).
    I hope this help you

  • Color Laserjet prints extra pages on startup

    I just bought a CP1518ni color laserjet printer and installed it.  It works fine except that whenever I restart my computer, the printer prints 3 extra pages.  Each has a single B&W line with gibberish printed at the top.  I've tried uninstalling and then reinstalling the printer but the symptoms remain the same.
    I am running Windows XP. 
    Any suggestions would be greatly appreciated.
    Wally

    Hello Galane,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Printing extra Pages

    Hi All,
       I have made a PLD for A/R Invoice. The print preview is comming all right but when I am giving for print an extra page is printed.
      Like the preview is showing one page and it is completely ok. Now when I give to print then the first page is printed and the second page is printed with the header part only.
    How to correct this. What can be the cause?
    Regards,
    Raj

    Hi
    Check also in the Layout you are working with: Print Layout Designer -> Display Properties -> Format -> "Preview Printing Layout" box if you have it checked and the value for the box 'Change Size in" is '-1'.
    Paulo Calado
    SAP Business One Forums Team

  • Double sided printing, adding blank page after two different groups

    Post Author: adepper
    CA Forum: General
    I have created a report that is structured as such:
    Group 1 - Based on formula, groups by type
    Group 2 - Based on formula, groups by use
    Group 3 - use (pulled directly from Database)
    Group 4 - ID
    I have the report printing an extra page after group 3.  I used this formula in the Section Expert - New Page After
    remainder(pagenumber,2)=0
    I also use that formula to reset the page number
    What I would like to do is print a second blank page if group 2 does not start on the top of the page, meaning I do not want either group 3 or group 2 to start on the back of a page, so that this report can be placed in a binder, with dividers.
    I have group 3 giving me a blank page with no issues, it is just group 2.
    Any help and/or suggestions would be appreciated.  If I did not give enough details, I am sorry.
    Thanks!

    Post Author: adepper
    CA Forum: General
    After a lot of blood, sweat and tears, not to mention a lot of curse words directed at the computer, I was able to get this to work.  Now I just have to do it for three groupings instead of two (deliver the impossible to your bosses, and they turn around and move the brass ring right out of reach again!)
    In case anyone is interested in how I was able to manage this (I found many sites where people asked this question, but not one complete answer), this is what I did:
    In the footer section:
    Group 4 - ID (database field)
    Group 3 - PrimeUse (database field)
        3a - Contains data
        3b - Contains data
        3c - New Page After, Keep Together, and Reset Page Number After are all checked.  In the condition for Reset Page Number After I also have this formula:
        remainder(pagenumber,2)=0
        3d - New Page After, Keep Together, and Reset Page Number After are all checked.  In the condition for New Page After I have this formula:
        remainder(pagenumber,2)=0
    Group 2 - Suppressed
    Group 1 - Grouped by Store Type -
        1a - Suppressed, New Page After and Keep Together are all checked.
        1b - New Page After and Keep Together are checked.  In the condition for New Page After I have to following formula:
        remainder(totalpagecount,2)=1
    If anyone sees any errors, or if you think you can get it so that I get another page blank, after Group 1, if the Group starts on an even numbered page, I would appreciate the help.
    Thanks!

  • 6980 always prints an extra sheet before job

    I have had two HP6980 printers. the first one failed through a faulty printhead. It always used to print an extra page before printing a check (Versacheck). I replaced it with an identical model and guess what, same thing! A blank page spits out first before the check prints. I have contacted the software vendor (Versacheck) and they insist that their software could not do that. So I tested to an HP LaserJet and no extra page, only on the 6980.
    All suggestions are welcome. I have tried firmware, latest drivers, USB, networked connection all to no avail. Has anyone else experienced this?

    Hi,
    in your Form there is only One Page created?
    just check if  there exists any other page and in the Standard attributes of the page in "Next Page", the other page is set.
    Ideally there should not be any page as the Next Page.

Maybe you are looking for