Sapscript printing problem

I made a graph window in a sapscript form.When i print it i have the following problem :
I can't see the "MAIN WINDOW" only. I mean that i can see all the other elements EXCEPT the main window .
Please help me .....

Hi,
Just check wheather the internal table you are trying to display in the main window is empty by mistake.
just try to put some charcter in the main window and test wheather it is printing or not .
Regards,
guru
mark if helpful

Similar Messages

  • Sapscript MEDRUCK/Zedruck Sapscript printing problem

    Hi,
    I have a problem in SAP version ECC SAP ECC 6.0 with the PO print  program SAPFM06P and the sapscript ZEDRUCK. From within ME23N when I do a print preview of the PO everything looks OK, however when I print it out to a HP Laserjet 1320n there is a strange number '4099' printed to the left of some of the fields, for example in the print preview I see 'Terms of Deliv.: FOB' but on the printed version I see '4099Terms of Deliv.: FOB'.
    These characters appear in other places on the PO as well. We dont have this problem on other sapscripts i.e invoices, quotations etc.
    Message was edited by: Mike D

    Solved used a different PO and all was oK.

  • Sapscript print problem

    in sapscript in the grand total it shud appear like this.
    ****23,33,546.00
    ie: everytime it gets printed (numerical value upto 10 crores) the first digits if they are not numerics (like the example sited)
    has to appear like '*'.
    pls help.

    HI
    I think you are doing payment advice right???
    In driver program * are added....Pls check
    or if it is another also try to debug the program u will find where they are adding..
    Thanks.
    Sai

  • Printing Problem in SAPscript

    Hi friends, I have one problem with sapscript printing. When i am seeing the print preview of a form i dont have any problems with words overlapping. But When i prnt on local printer I am seeing words overlapping. Is there anything worng in my form or anything to be configured with printer ? please help me

    Seems like your Printer Driver and SAP logical printer doesn't match each other. Take a help from your Basis guys.
    Regards,
    Naimesh Patel

  • Printing Problem in sap script

    Hi all,
    There is a printing problem in z report of sapscript.
    when I am giving continuous print ...
       1st page is right in print format but in 2nd page the text comes 1 row up...and so on...
    so the starting point for all page are not same...
    Please help me...

    Hello,
    Check SAP note 39259.
    Regards,
    David

  • SAPscript Output Problem - Very Urgent - Please help

    Hi,
    I am having the following problem with SAPscript.
    In the Main Window, I have instructions to the printer in the ZPL2 language (For Zebra Printer).
    There are also several variables, which are highlighted in Gray and enclosed in the’&’.
    There are also several elements – all of them empty except for the one where this code is.
    Now, I received this program to modify in terms of code and the output.
    IF you have never done any work with Zebra Printing, the way it is done is that you create a label using the Zebra BarOne or Zebra Designer program, then output it to an ‘itf’ file, upload it into a standard text as .itf and copy the uploaded contents to the main window. When printing to a Zebra printer, the Zebra printer will read the instructions and will print the output.
    Here is the problem: The config for the output type is correct.
    When doing a printing test from SAPscript, I get the right output and the Zebra printer is able to print it.
    However, the real process for this task will go through MB02. There, if I create a spool request using the proper method (select output type and etc.), it will go the spool. However, if I print preview or output (doesn’t work with the Zebra printer, so I have to output to the Laser printer), it will output the following (none of the following includes any of the ZPL2 code/instructions. Instead, it seams to print the variables contents with the field name next to it – This isn’t whats it’s the Main window!!!)
    http://img244.imageshack.us/img244/6915/66052475zk2.jpg
    Please help. I have debugged but don’t know what to do and can’t find anything wrong.
    This is very urgent. Any help will be useful.
    Thanks,
    John

    Ok, maybe I have confused others in regards to the issue as well.
    We expect this label to be output from a Zebra Printer.
    When output through Sapscripts printing test, the preview from the spool shows the ZPL2 code in small font (non readible if a created a screenshot) and if sent to the Zebra Printer, it prints the label correctly.
    When output through MB02, the preview from the spool shows the code that I have attached to the 1st post in this thread. If I try to output to the Zebra Printer, nothing happens because the ZPL2 instructions are not even in the preview and therefore, the Zebra printer recieves no instructions. I should not have mentioned the laser printer, because it has nothing to do with this issue.
    I hope that this makes the issue a little more clear and understandable. Please help.
    Here is the ZPL2 coding before uploading to standard text (only difference is that once uploaded,  the '/' characters are removed.) However, I believe that the problem may lie in the print program and how it compiles but I debugged and haven't really seen where it comes from:
    /:NEW-PAGE
    / ^XA
    / DFNEW-RE-1FS
    / ^PRC
    / LH0,0FS
    / ^LL1830
    / ^MD0
    / ^MNY
    / LH0,0FS
    / FO244,854A0N,55,46CI13FRFB154,1,0,LFN999^FS
    / FO819,698A0N,55,46CI13FRFN998FS
    / FO245,477A0N,55,46CI13FRFB755,1,0,RFN997^FS
    / FO389,926A0N,55,46CI13FRFB654,1,0,RFN996^FS
    / BY3,3.0FO42,1072B3N,N,152,N,YFRFN995FS
    / FO276,1258A0N,55,46CI13FRFN995FS
    / FO484,774A0N,55,46CI13FRFN994FS
    / FO817,774A0N,55,46CI13FRFN993FS
    / FO611,556A0N,55,46CI13FRFN992FS
    / FO245,556A0N,55,46CI13FRFN991FS
    / FO397,117A0N,55,46CI13FRFN990FS
    / FO245,405A0N,55,46CI13FRFB880,1,0,RFN989^FS
    / FO244,698A0N,55,46CI13FRFN988FS
    / FO629,998A0N,55,46CI13FRFN987FS
    / FO244,623A0N,52,42CI13FRFN986FS
    / FO397,261A0N,55,46CI13FRFB404,1,0,RFN985^FS
    / FO819,854A0N,55,46CI13FRFN984FS
    / FO725,554A0N,55,46CI13FRFN983FS
    / FO397,189A0N,55,42CI13FRFB695,1,0,RFN982^FS
    / FO397,333A0N,55,42CI13FRFN981FS
    / FO638,333A0N,55,42CI13FRFN980FS
    / FO391,21A0N,63,63CI13FRFB433,1,0,CFN979^FS
    / FO36,698A0N,55,46CI13FR
    / FDWBS:FS
    / FO37,405A0N,55,46CI13FR
    / FDMATL:FS
    / FO37,478A0N,62,44CI13FR
    / FDDESC:FS
    / FO554,698A0N,55,46CI13FR
    / FDSUPPLIER:FS
    / FO32,625A0N,55,46CI13FR
    / FDTEXT:FS
    / FO35,1258A0N,55,46CI13FR
    / FDBATCH NO:FS
    / FO770,775A0N,63,51CI13FR
    / FD/FS
    / FO32,854A0N,55,46CI13FR
    / FDESHM:FS
    / FO37,556A0N,55,46CI13FR
    / FDQTY:FS
    / FO32,998A0N,55,46CI13FR
    / FDSAP MATERIAL DOC NO:FS
    / FO525,333A0N,55,46CI13FR
    / FDofFS
    / FO556,854A0N,55,46CI13FR
    / FDINSPECT:FS
    / FO32,926A0N,55,46CI13FR
    / FDUNLOADING:FS
    / FO37,117A0N,55,46CI13FR
    / FDSTOCK TYPE:FS
    / FO32,774A0N,55,46CI13FR
    / FDPURCHASE ORDER:FS
    / FO37,188A0N,55,46CI13FR
    / FDDELIVER TO:FS
    / FO37,260A0N,55,46CI13FR
    / FDSTORAGE LOC:FS
    / FO37,332A0N,55,46CI13FR
    / FDCONTAINERS:FS
    / FO1,1359GB1217,0,6^FS
    / FO594,1359GB0,474,6^FS
    / ^XZ
    /:NEW-PAGE
    / ^XA
    / ^XFNEW-RE-1.ZPL
    / FN999FD&ATWRT_HAZAMAT(6)&^FS
    / FN998FD&EKKO-LIFNR&^FS
    / FN997FD&MABDR-MAKTX&^FS
    / FN996FD&MSEG-ABLAD&^FS
    / FN995FD&MSEG-CHARG&^FS
    / FN994FD&MSEG-EBELN&^FS
    / FN993FD&MSEG-EBELP&^FS
    / FN992FD&MSEG-ERFME&^FS
    / FN991FD&MSEG-ERFMG&^FS
    / FN990FD&MSEG-INSMK(1)&^FS
    / FN989FD&MSEG-MATNR&^FS
    / FN988FD&MSEG-MAT_PSPNR&^FS
    / FN987FD&MSEG-MBLNR&^FS
    / FN986FD&MSEG-SGTXT(40)&^FS
    / FN985FD&MSEG-UMLGO&^FS
    / FN984FD&QALS-PRUEFLOS&^FS
    / FN983FD&V_BACKORDER&^FS
    / FN982FD&V_NAME3&^FS
    / FN981FD&WS_CNTR&^FS
    / FN980FD&WS_CON&^FS
    / FN979FD&WS_HEADER& &^FS
    / ^PQ1,0,1,N
    / ^XZ
    / ^FX End of job

  • SAPscript printing (Works Fine in Preview, Disappear in Print Out)

    Dear Guru,
      i have a problem in SAPscript printing, especially i use ULINE(90) inside forms,  it's works fine in Preview, but when i print it out after 89 of ULINE showed, it's show blank area and the 90th uline appear in next line.
    any expert in this area can tell me what happen?
    thanks.
    Howard

    Hi Howard,
    this is printer problem.
    Appart from regular settings we have left margin and right margin settings for printer.
    If you rememmber we can do this setting if we print MS WORD document.
    There is no setting available in SAP.
    So solution is to increase right margin on your laout and try to fit your contents in same.
    The preview is dependening on device type in SAP so u get previeew right.
    Hope this will help.
    Thanks,
    Dhiraj.

  • SAPScript - Print Preview 2 Pages - Physical Print overlap as 1 Page

    HI Experts,
    I have a problem with Invoice SAPScript Printing - where the print preview is good with 2 Pages,
    But when it physical prints out - Only 1 page and overlapping the Second page content to the first.
    Any idea where did I miss out?
    Thank you in Advance.
    Regards,
    CWLIM

    HI ,
    Sheelesh  is right.
    I had both SAPScript and Smartform issue with the overlapping printing.
    What you need to do is to check your page format to see if it is the correct size for the specific printer.
    If it is too big for the printer paper size - it will overlap the printing as 1 page.
    For example : A4 Lanscape printing on normal HP Laser Printer - DINA4 Landscape should be used.
    Or at least when you define your own page format - refer to the correct size and orientation.
    HOpe this helps.
    Thank you all

  • Sapscript printing only the last value

    Hello,
    Im currently coding subroutine for medruck.. My problem is sapscript is only printing the last value of the item for all items.. For example:
    Item # 1    10 pcs  10,000.00
    Item # 2     5 pcs   10,000.00
    Item # 3     5 Pad  10,000.00
    where actually the value of item 1 and item 2 is not 10,000.. sapscript prints only the price of item # 3 for the  first two items.. here is my code..
      TABLES: konv, ekko, ekpo.
      DATA: BEGIN OF tab OCCURS 0,
          brtwr LIKE ekpo-brtwr,
          ebelp LIKE konv-kposn,
          ebeln LIKE ekko-ebeln,
          knumv LIKE ekko-knumv,
          kbetr LIKE konv-kwert,
    END OF tab.
      DATA: sum TYPE p DECIMALS 2, gross TYPE p DECIMALS 2, val(16) TYPE c, d_knumv LIKE ekko-knumv, tab1 LIKE tab, val1(20) TYPE c,
            ext TYPE p DECIMALS 2, val2(20) TYPE c, extend TYPE p DECIMALS 2.
      REFRESH: tab.
      READ TABLE in_tab INDEX 1.
      CHECK sy-subrc = 0.
      SELECT brtwr ebelp ebeln FROM ekpo INTO TABLE tab WHERE ebeln = in_tab-value.
      LOOP AT tab.
        AT NEW ebelp.
          tab-kbetr = 0.
          ext = 0.
        ENDAT.
        SELECT SINGLE knumv FROM ekko INTO tab-knumv WHERE ebeln = tab-ebeln.
        SELECT SINGLE kbetr FROM konv INTO tab-kbetr WHERE knumv = tab-knumv AND kposn = tab-ebelp                                AND kschl = 'ZDEL'.
        ext = tab-brtwr + tab-kbetr.
        AT END OF ebelp.
          READ TABLE out_tab INDEX 1.
          WRITE ext TO val.
          out_tab-value = val.
          MODIFY out_tab INDEX 1.
        ENDAT.
        CLEAR: tab.
      ENDLOOP.
    i used this code using abap only and it work. there seems to be a problem in sapscript.. Thank u for the help guys..
    Thanks,
    JP

    put ur write_form with in loop...
    loop at itab.
      write_form..
          element = 'ddd'
    endloop.
    in script check ...
    check wheather element is specified there r not
    /e  ddd.
         &itab-   &  &itab-  &

  • Print problems double byte characters (ZH - simplified Chinese)

    We are currently preparing a 4.7 (WebAS 6.20 on SLES) rollout in China and struggle with a severe printer problem. Our SAPScript forms contain a mixture of western and simplified Chinese characters. The printouts come just with either hashes, blanks or undefinable characters instead of Chinese. We generally use HP Laserjet printers there (1022n, 2300, 2420, 2600n, 4100, 6L). SAP patch level is 51 for SAP_BASIS (I know that's "a bit" behind). I've already checked a number of SAP notes but couldn't find anything really usable. Basically I think the reason is the printer themselves (installed fonts) and the problem might be solved by adding some DIMM modules containing the specific asian fonts (anyhow they seem to be hard to get as the printer models are rather old). Did anyone come across similar problems? I'd really appreciate any kind of info or help.
    Cheers,
    Andy

    Hi Markus,
    thanks for the info. We've actually been able to get some DIMMs (hard to get, seems like they are not produced anymore, new printer models can be flashed either by CD or Flash Card) and, after we made some changes in the SAPScript forms (wrong character sets) it worked properly.
    Frontend printing: definitely to be avoided, would only have been an option for a couple of days to get some additional time. One option I've also tried is a mixture of network and frontend printing: I've set up a windows server and used saplpd as a print server. You can point the SAP devices in SPAD to that server by setting up the device's destination host and host printer accordingly. Actually this should be avoided, too, as saplpd as a print server is considered to be very instable. sapsprint actually isn't better.
    Anyhow - as we've managed to get the DIMMs it's working now.
    Cheers,
    Andy

  • Barcode printing problem

    Dear Expert,
    I'm facing a barcode printing problem where it displayed incorrect barcode formatting in the print preview by displaying strips for bar lines.  I'm using Sapscript to do this and I have already specified in Character format for barcode Code 39 and I have created a Z system bar code(se73) specfically for this. Could you pls give me some ideas on how to solve this problem.
    Thanks
    Adis

    Hi Adis,
    There is another way of having the print preview. You directly print the Sap Script, it will go to spool (SP01). Now use the program RSTXPDFT4 in SE38 and enter the spool number. It will convert the spool record with that particular number to the PDF fomat. You can now see the view through the PDF format.
    In the direct print preview you may do not get the correct view of the bar code specially for the SAP Script.
    Please check....
    Warm Regards.
    Abhijit.

  • Airport Extreme Printing Problem with HP Deskjet.

    Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4   Mac OS X (10.4.4)  

    Hello jds17. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations.
    Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
    o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also, you may find the following Apple article helpful.

  • Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

    Not printing text only on Canon--grahics print ok.  Not printer problem.  Prints ok on a Brother and another network Apple prints ok on Canon.  Believe a computer setting was inadvertently reset.  What setting and how do I reset?

    Without your printer model numbers, readers can only give you vague general directions.
    System Preferences > Print&Fax > ...
    ... shows a list of all set-up printers.
    If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
    Mac OS X 10.6 Help: Resetting the printing system

  • Crystal report printing problem in Malayalam

    Hi,
    I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
    please help me...!!!

    Hi priyashekar,
    I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
    Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Maybe you are looking for