SAPScript: Structure with the current print page during printing?

Hello,
ist the a structure which is filled with current infomation about the printed SAPScript form. For example can I get the current printpage during printing the form? Thanks.
Regards. Lars.

You can use directly &PAGE&.
This will print the current page number.

Similar Messages

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Cannot print due to a problem with the current printer

Cannot print (anymore) due to a problem with the current printer is the message I get every time I try to print something out. I tried to reinstall the printer's software, I changed the cables, but nothing happened. It seems to be something related to the printer setup utility. Any big idea on how to solve this? I was printing without problems until this afternoon. I have a HP Laserjet 1022 and sometimes I use Adobe Acrobat Writer. None is currently working.
Thanks for any help.
Power Book G4 Mac OS X (10.3.9)

I just had the opererational system (10.3.9) reinstalled . Back to normality again.

I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have be

I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have been forced to go to IE or Crome in order to accomplish what I need to do. Very frustrating. Also clicking in the slider area has no effect. "Page Up" and "Page Down" keys work. Holding down left mouse button on slider works. Also very frustrating. Can someone help
== This happened ==
A few times a week
== Upgraded to 3.6.3.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Name of the current printed page, page-window

Hello,
I need to determine the position of the currently printed page-window during runtime in the form. For that I need the name of the currently printed page. How can I retrieve this name during runtime in the form? Are there system variables? Any Idea?
Regards, Lars.

Hi Lars,
Types of symbols
Check out these standard script symbols for System variable Display
Symbols are indentified by name surrounded by "&" and are not case sensitive.
System symbols
DATE Date
DAY Day
NAME_OF_DAY Name of day
MONTH Month
YEAR Year
TIME Time
HOURS Hours
MINUTES Minutes
SECONDS Seconds
PAGE Page number
NEXTPAGE Number of next pagre
DEVICE Output device
SPACE Blank space
ULINE Underline
VLINE Vertical line
Reward points if this helps.
Manish
Message was edited by: Manish Kumar

Using Windows XP and Firefox 3.6.15 web pages print with some of the script as unintelligible weird looking script or maybe some kind of computer script. This doe not accure usingg IE 8.0 with the same printer.

Using Windows XP and Firefox 3.6.15 web pages print with some of the script as unintelligible weird looking script or maybe some kind of computer script. This problem also occurs with the web page on which this question is submitted. This doe not occur using IE 8.0 with the same printer.

These have nothing to do with Firefox.
C:\ProgramData\FLEXnet\Connect
\11\ISUSPM.exe
and
C:\Users\Vinegarhill-User Acc\Desktop\Malware Removal Programs\eXplorer.exe
This one - C:\Users\Vinegarhill-User Acc\AppData\Roaming\Mozilla\Firefox\Profiles\ak4dv58c.default\extensions\ \components\afom.exe - is probably the '''AFOM - Memory Recovery & Retention For Firefox Only''' extension.
https://addons.mozilla.org/en-US/firefox/addon/11922/
My advice is to uninstall that extension. IMO, you have too many extensions installed, and are asking for problems with Firefox. I am not against using a lot of extensions in Firefox ''(I typically have 45 to 50 extensions installed, but the mix of extensions you have scares me as potentially problematic.)''

When I want to go back a page the drop down box is filled with the current page, all earlier sites have disappered out of sight

When I have been at a site for a while and decide to go back, when I use the drop down box it has filled with the current page location. The longer I am there the more times it repeats its self.

Did you try Safe Mode?
An extension may be responsible for adding up those entries of the same page.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Download a file on a separate page without linking it with the current session

Hi,
Here is my problem:
In a JSP, the client chooses a link referring to a document which is contained in a blob on the database. This JSP calls a servlet which retrieves the PDF from the blob. I can send this PDF on a separate page if the <a href> on the JSP specifies TARGET=BLANK. But if the client closes the new window, the server doesn't recognizes the session that was going on on the JSP anymore. It looks like the response sent with the PDF takes the pole of the session and the first pending page (the JSP) is not associated anymore with the session.
There must be a way to send a second page without associating it with the current session.
Another way to solve my problem would be to send the PDF as part of a regular html page. I know this can be done, but I don't know how to do it.
Any suggestion?
Thanks
Jean Vaillancourt, Montreal

When opening the new window use child instead of blank. That should keep the session intact in the old window.

I am trying to install Java. I get the follwoing The installer can not proceed with the current internet connection

I am trying to install Java6 from a free down load. I keep getting the following error message:
The installer can not proceed with the current internet connection settings.
I have tried every option under internet connections.

#'''Install or Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Shockwave Flash 10.2 r153
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

Can I have multiple event structures with the same event cases?

Hello,
I'm doing an application that reproduces the front panel of the HP6675A power supply. To achieve this, I have done a state machine with different states
(initialize, measures, voltage, current, ocp, ov, store, recall, etc). In each state, should have an event structure that catches the events of the buttons, like for example: if the current state is the Voltage mode and the user press the current button the next state will be the Current mode. For this in each state of the state machine should be the same event structure with the same events.
My problem is that the Vi doesn't work properly when I have multiple event structures with the same event cases. There are some possibily to do this, and how? Or is impossible to have multiple events? I have been reading some posts, but I don't find solutions.
Any help is appreciated.
Thank you very much.
Solved!
Go to Solution.

natasftw wrote:
Or as others mentioned, make two parallel loops. In one loop, have your state machine. In the other, have just the Event Handler. Pass the events from the handler to the state machine by way of queues.
A proper state machine will not need the second loop. The "Wait For Event" or "Idle" state (whatever you want to call it) is all you really need in order to catch the user button presses. The setup is almost there. Maybe add a shift register to keep track of which state to go to in the case of a timeout on the Event Structure.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Problem viewing forms.This form is not supported with the current version of Adobe Reader.Upgrade to the latest version for full support. That does that mean exactly?

Problem viewing forms.This form is not supported with the current version of Adobe Reader.
Upgrade to the latest version for full support.
What exactly do I need to do?

That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
BTW PLEASE complete your profile. It's very difficult to help someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information.

URL of the current portal page loaded using Javascript ?

Hello:
I am trying to add programmatically the url of the current
page loaded in the portal to the 'Favorites List'. There
is a pre-built KM iview to store your 'favorites'.
I can extract and write to this 'favorites' using KM java
API. But only challenge is to extract the current loaded
page URL and title using Javascript.
I would appreciate any help in this regard.
Thank you very much,
Prasad Nutalapati

Dude i was having the exact same problem. I solved it using the SAP-provided EPCM (javascript client framework).
Javascript Code
var pageName = "";
var URL = "";
function bookmarkPage()
 /* page url */
 var fullURL = "https://<%=request.getServerName()%>/irj/portal?NavigationTarget=" + URL;
 /* IE bookmark */
 if(EPCM.getUAType() == EPCM.MSIE)
 window.external.AddFavorite(fullURL , pageName);
 else
 var msg = "Sorry. The \"Add To Favorites\" feature only works with Internet Explorer. " +
 "The URL to this page is " + fullURL;
 alert(msg);
/* get pagename from eventObject from subscribed event */
function getPageObject(eventObj) {
 pageName = eventObj.dataObject.title;
 URL = eventObj.dataObject.URL;
/* subscribe to event in pagetoolbar area */
EPCM.subscribeEvent("urn:com.sapportals:navigation", "AddNavTargetAllowDuplicate", getPageObject);
End of code
Basically, what this does is that everytime a page loads, the innerpage, where the content is, raises an event using the EPCM.raiseEvent() method. EPCM.subscribeEvent subscribes to an event called AddNavTargetAllowDuplicate which has an object holding the page information (i.e. page title and URL (ROLE://...)). Everytime that it notices an event raised, the function getPageObject gets called to go get data from the event object that is available globally in the framework.
You should be able to put this code anywhere in any iview and it should work. Thou i have only tried putting it in the masthead. Try and if you still have questions please let me know.

Returns with the current moving average price

Dear All,
I have a concern, if its possible to return to vendor with the current moving average price as I know that returning with movement type 122 is not applicable with such a case , so please advice with an OSS note if applicable
Appreciating your quick response
Thanks

Hi,
Why you MAP price to be update during 122 vendor returns?
When returns are processed with same value as it was with 101 movement type.
It cannot be same as MAP price of material.
MAP is update based on the average movements of material with quantity and value.
In std you cannot update MAP price of material during vendor returns and its not suggested.
Rgds,

Problem in Chinese Label Printing with the Zebra Printer

Hi Experts,
I have a requiement in which I have to print the Chinese Label with the Zebra Printer. But it's not printing the same.
I have created SAP-Script for it.
It's seems that I am missing some prerequisites.
If anybody have worked on such issue, can u help me in the following scenarios:
1 What are the prerequisite to print Chinese label??
2 What are the SAP server side requirements?
3 What are Client side requirements??
4 What are Printer Side requirements??
5 Which font we need??
6 Can we print with SAP script??
I am using the Zebra 110XiIII Plus (200dpi) printer for this purpose.
Please tell me all the above prerequisite.
Thanks
krishan

Hi Krishan,
I want to print latin and chinese characters on the Zebra printer. How did you solve? What device type do you use?
I have created a standard text with SO10.
Currently I use ASCIIPRI and all chinese characters are printed as #. The device type is obviosely wrong.
I hope you can help me.
Frank

Will Apple improve the earbud structure? The current ones kill my ears. For the price consumers pay for these products, we should receive top notch earbuds that fit the ear.

Will Apple improve the earbud structure? The current ones kill my ears. For the price consumers pay for these products, we should receive top notch earbuds that fit the ear.

Some phones that you can buy do not come with headphones at all.
http://apple.com/feedback

SAPScript: Structure with the current print page during printing?

Similar Messages

Maybe you are looking for