Sapscript upload from 4.6 to ECC 6.0
Hi friends,
I have download the Sapscript from 4.6 and upload into ECC 6.0 server using RSTXSCRP.
I am getting dump when opening the from windows in ECC 6.0. Is there any way to upload the form in ECC 6.0.
Thanks
Sabu
what that Dump is saying ? Check in ST22.
may be probs with Unicode checks
Regards
Peram
Similar Messages
-
SAPSCRIPT copied from 4.6C to ECC 6 - errors while testing
Hi I have used program (RSTXSCRP) to import SAPSCRIPT from 4.6c to ECC 6.
After i copied i did activated.
When i am trying to test the form I am getting an error saying FORM (it removed first character from my Z sapscript name and saying the remaining name) (FORMNAME) does not exists and no errors.
Any one had gone through the same issue.
Thanks,I have done it numerous time but I don't get any error like what you mentioned
Is the status of the import OK???
can you edit the form in SE71? -
Upload Sapscript Form from Different Servers
Hi All,
Is it possible to upload/import a downloaded sapscript form from one server to another server? If so, how am i going to do it?
Points will be awarded.Hi,
Use this program RSTXSCRP.
In first server:
Please follow this :
Select radio Button form>Object name(Script Name)->Mode(Export)>select From on Front end--
>give file name to download.
In second server:
Please follow this :
Select radio Button form>Object name(Z Script Name)->Mode(Import)>select From on Front end--
>Select Downlaoded file name which is on the front end for uplaoding.
Regards
Janardhan
Edited by: JANARDHAN REDDY on Aug 14, 2008 9:56 AM
Edited by: JANARDHAN REDDY on Aug 14, 2008 9:59 AM -
Data Migration from Legacy system to ECC systems via ETL through SAP PI
Hi All,
I wanted to know if we can migrate the data from Legacy systems to ECC systems via PI.
What I understand is there is ETL tool is used to extract the data from legacy system, and what client is looking to load that data via PI?
Can we do that ? I am concerned because this will involve mass data?
If I have to use PI , I see option of PROXY / IDOC /FILE as receiver in ECC system (take the data from ETL)?
Can somebody has done this earlier , please share the approach.
Thanks,
Pushkar PatelHi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha -
Migration of Cost Centre Hierarchy from 4.7 to ECC.0
Hi Gurus
Our client is upgrading from 4.7 to ECC 6
Now currently we have a standard hierarchy in Legacy system and multiple alternate hierarchies.
I would request your suggestions on the best way to be able to combine and modify the Hierarchies outside Legacy System before uploading into ECC.
I could find an IDOC COGRP01 which can create cost centre groups which requires data in a particular format.
Best Regards
VarunHi Varun
Choice is yours! Whether you modify it in the Source system 4.7 version and then transfer it to ECC or you move it as it is to ECC and then modify it in ECC
you will have to choose between the two
Regards
Ajay M -
What are the backend configuration required for photo upload from portal?
Hi all,
When i am trying to upload the photo from portal it is giving error
can not archive the photo
we are using portal 7 and ecc 6.0
I want to know
What are the backend configuration required for photo upload from portal
Can any but help me out
RajendraHi,
Are you using the standard iview. If that's the case you need to configure in the backend. Meaning you need to store the photo in the Org management(HR) which the HR functional guys will do. You just need to add the iview to your role.
Let me know if you require further informationn.
Award points if helpful.
Cheers,
sathya -
Error while deploying a PAR file from NWDS into an ECC.
Hi all,
I am getting this error while deploying a PAR file from NWDS into an ECC.
Operation Failed: Please make sure the server is running or check the log (sap-plugin.log) for
more detail.
My server is running properly
1 - Where is sap-plugin.log file? I don´t find it.
2 - Could there be another file with another name with information about the error?
3 - Is there another way to deploy the file directly from the ECC?
Regards,Hi,
Just make sure you have maintained correct server setting to check the same open the NWDS and follow this path
Windows/ Prefereces / SAP Enterprise Portal
Check the following enteries
Alias
Host
Port
Login etc.
Regards, -
I need the Log Report for the Data which i am uploading from SAP R/3.
Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nileshHi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob -
Error while RRI from BW reports to ECC CJI3 transaction
Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
<b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasadHi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana -
Data is not uploaded from the dso to the cube
Dear Experts,
In one of my process chains the data is not uploaded from the dso to the cube .
I have tried to upload the data month wise also but still after certain data records the data gets stuck up.
I have recreated the indexes also.
When I am checking in DB02 the table space is shown as 18491 MB.The used space is 97%.
Please suggest.Hi.....
I didn't get your point........what have you mention that you have recreated the index before loading....
Basically.the process should be........Delete index --> Load --> Create index......
You have mentioned that 97% of the memory space is in use........please check with the basis team once......
Also, in SM37 check if any such job is there which is running for a long time but not progressing......or which you think you don't need......then kill that job......
Regards,
Debjani..... -
we can not upload from the desktop to post on either facebook or to our fat cow web site. We have had fat cow upload from their end and have no problem
Follow the instructions to uninstall then reinstall the Flash plugin then restart the Mac(s).
http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,
Help for deleting Flash cookies. http://hints.macworld.com/article.php?story=20091114062050800 -
Interview questions on upgrades from 4.7 to ECC
Hi,
Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
Points will be awarded.
ThanksHi Frank,
this is good question, why because sap upgrades from 4.6b to ecc 6.0 is very risky.
take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
check the obsolete function modules , 4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
once you change the code in ecc , go to tranx : SLIN check the error where it is exact. -
How to schedule Job for data uploading from source to BI
Hi to all,
How to schedule Job for data uploading from source to BI,
Why we required and how we do it.
As I am fresher in BI, I need to know from bottom.
Regards
Pavneet RanaHi.
You can create [process chain |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?quicklink=index&overridelayout=true]for data loading pocess and schedule start process to any time/date etc ...
Regadrs. -
How do i keep certain songs from being uploaded from my library to my ipod
how do i keep certain songs form being uploaded from itunes to my ipod the check button does nothing
30gig ipod Windows 98Set your iPod so you can manually manage your songs, see here for details:http://www.apple.com/support/ipod/tutorial/ipgettingstartedt3.html
-
I have subscribed to I Tunes Match on my computer where I've been syncing and backing up my I Phone. Can I access my music before all the artwork is uploaded from my computer?
Hi,
You will no longer be able to sync manually with match. I would suggest that you wait until match has competed its process on your computer and that you are told how many tracks are in the cloud.
If you activate match on your iOS device too soon, you may find that all your tracks are not there. Ps it is not just artwork that is being uploaded, it's music as well.
Jim
Maybe you are looking for
-
I'm currently writing a financial tracking program for the mobile phones and since I need a number of files to work with each time, my idea is to work with only one file opened at a time (since I don't want to open too much files that could slow down
-
BC4J ApplicationModule - best practice in Stateful web application?
When writing a stateful web application that uses BC4J framework as the model, what is considered best practice in using the Application Module. Is it okay to store an AM instance in a HttpSession, or should we opt for the features explained in the B
-
I have the same photo in an album and in camera roll. I am trying to delete the photo from the camera rol and the only option that i get is : delete everywhere? Noooooo i just want to delete it from camera roll!!!!!
-
Acroread 8.x CJK input problem
See also https://bugzilla.novell.com/show_bug.cgi?id=353251 CJK input doesnt work right in the English version of acroead 8.1.1 or the pre-release version 8.1.2. First of all, one needs to set export GTK_IM_MODULE=xim to make acroread react at all to
-
IPod classic charger with iPhone 3g ???
I will be receiving a 3g phone tomorrow. I have a question concerning chargers. Will the charger I have for my iPod Classic video 30GB work with the iPhone 3g??