[sapsem] BI-IP: Documents with restricted key figures in WAD

Hello,
we use documents for characteristics in WAD (BI IP) suscessfully.
We would like to use documents also for restricted key figures.
Example:
0Version has "document property" defined in RSA1
We have a restricted keyfigure ED_K10 with the restriction 0VERSION = 10
We are not able to use it, because document functionality can be used
for characteristics only.
Does anyone have an idea what to customise to be able to use documents
also for restricted keyfigures?
regards and thanks in advance for any feedback
Eckhard Lewin

Hi Eckhard,
I think 0version needs "document property" , too !
regards
Paul

Similar Messages

Problem with restricted key figures

Hi all,
I have four restricted key figures in my structure each one is restricted Fiscal period with user entry variable but when i execute the report and check one of the restricted keyfigure is actually not restricting the values.
suppose user entered 10.2006 in the selection for fiscal period then one of the column Goods receipts QTY which is restricted with Fiscal period display values other than that of 10.2006
Did anyone faced such problem earlier?
Please let me know if anyone had a clue.
Thanks in advance
Regards
Ajay

Hi gopi,
Thanks for all of the restricted keyfigures it is "include value".
Regards
Ajay

Problem with restricted key-figure using off-set variable

Hello Gurus,
I have created a query in Bex Query Designer with a key figure restricted. This key figure shows me the 0amount value for the last month. When I select 003.2009, the key figure brings the 002.2009 values. I used an off-set variable to do this
It works!
But when I show this key-figure in Webi, no value shows up on the table.
Any suggestions?
tks
Edited by: Allisson Valverde on Jul 23, 2010 12:12 AM

Which variable are you using in BEx and in WEBI to restrict the month/year?

Problem with Restricted Key figure!

Hello BW Gurus,
Currently I am having problem with a report that is using a restricted key figure in the formula. When I filter down this restricted key figure, it is working fine but when I use this restricted key figure in formula that calculate greater than value, its giving me wrong figure and when I calculate less then value, its giving me zero total result. I am drilling down this restricted KF on a hierarchy. Did I miss any setting or do I need to do anything extra for this?
Please let me know and thanks in Advance,
Vaghar.

In that case create two calculated keyfigures CKF1 and CKF2 such that
CKF1 = ((Count >100)*1 + 0)
CKF2 = (Count<100)*1 + 0)
and then define Greater Count as a formula such that
Greater Count = Count (CKF1)
and similarly Lesser Count = Count (CKF2).
where Count is a data function which gives a value of 1 when the operand <>0 and returns a 0 when the operand = 0.
Hope this helps.

Problem with Restricted Key Figures Please Solve

Dear All.
i restrict the key figure on some GL's for Cumulative balance, this RKF show me the result base on the 0CALMONTH which is select in the variable screen.
i created one more RKF with the same GL's but i restrict that RKF also with fix 0Calmonth say DEC2008.
but the problem is when i run the report it shows me that data correct, but when i bring the 0CALMONTH on top of the Key Figure structure it only show me the data for selected month for the fix month RKF the result come empty.
my requirement is that i have to select month range and i need to show every month value minus the Dec2008 value, this only works if i donot bring the 0CALMONTH on top of Key figure structure but i want to keep it on the top of KF structure so i can show each month value - dec2008 value.
Please explain how can i control this.
Kind regards,
Edited by: Zeeshan haider on Nov 11, 2009 9:49 AM
Edited by: Zeeshan haider on Nov 11, 2009 9:59 AM

Dear Chandu.
I am creating the RKF on Cummulative Balance KF by restricting it with some combinations of GL's, let say the name of RKF is TRADE_Accounts.
My requirement is to give Calmonth selection from the variable in interval let say from 01.2009 - 05.2009
i simply want to display TRADE_Account balance for each month in selection but by doing the minus the value of Trade_Account from the same RKF i.e. TRADE_Account_2 which i restrict on DEC2008.
so i created Two RKF for KF cummulative balance one is restricted with 0CALMONTH value for DEC2008 only.
then i create on CKF let TRADE_BALANCE = TRADE_Account2008 - TRADE_Account.
and place the CKF in Key Figure Structure, it work fine but problem comes when i try to bring 0CALMonth on top of key figure structure so i can show the result for each selected month.
when i do this it only shows the Balance for selected months but it did not minus it with the other RKF i.e. TRADE_Account2008.
when for testing i also put the TRADE_Account2008 in Key figure structure it shows empty result when the 0CALMONTH is on top of the Key figure structure.
Please explain how can i achieve this.
Kind regards,

Restricted Key Figure and : Change Variable in WAD

Hi everybody,
I have a restricted key figure in my query, which is restricting all sales volumes of a product by time variable.
I am using this restricted key figure instead of a real filter on the whole query because I have to view the total volume of this product and the volume in this year.
This works very well, but I have no possibility to change the value of the time variable in the restricted key figure in WAD by a generic navigation block.
How can i do this?
Thanks,
Alex

Hi...
The Web item Generic Navigation Block displays the navigational state of a query view in the Web application in the form of a table. All characteristics and structures in the query view are listed in the table and their filter values are displayed. You can change the navigational status of the query view. You can filter according to single values and remove the filter again.
You want to see the results in tabular form and to be able to navigate
through those results using key figures and characteristics.
1. From the Start menu, open the Web Application Designer and start the Web
Application Wizard
a) Choose Start → Programs → Business Explorer → Web Application
Designer → Tools → Wizard.
Choose Next to skip the start page.
2. Select the Generic Navigation Block item and accept the default settings for
this item.
a) In the Select Web Item dialog box, choose Standard Items → Generic
Navigation Block, then select Next to transfer the item into your Web
template.
3. Assign the query Customers/Sales as a Data Provider
to the Generic Navigation Block web item. After assigning the Data Provider,
accept the default values for the item attributes.
a) Choose Query.
b) The Open Query / View dialog box appears.
From the Roles, select the query for Reporting→ Unit: BEx
Web Application Designer → Lesson: BEx Web Application Wizard →
Exercise → Customers/Sales .
Choose OK. The dialog box closes and you return to the Web application
Wizard. Choose Next to reach the Edit Attributes dialog box. Since you
want to accept the default properties of the item, choose Next.
c) In the Overview dialog box, you see all the items you have selected so far.
Add the Table Web item to your Web template and accept the suggested settings
for this item.
a) In the Overview dialog box, choose Add Item to add an additional item to
your Web template. In the Select Web Item dialog box, select Standard
Item → Table.
Choose Next in order to transfer the item into your Web template.
5. Assign the same Data Provider to this item as you did for the Navigation Block.
Accept all the default settings for this item. Arrange the Web template to have
the Generic Navigation Block before the Table.
a) Both items in the Web template use the same Data Provider. Therefore, you
can use the same entries for this item. Choose Next.
b) Leave the properties of the table item unchanged. Skip over the Edit
Attributes dialog box by choosing Next.
c) Both Web items now appear in the Overview dialog box. Change the
sequence of the two web items so that the Web template starts with the
Generic Navigation Block. Use the up and down arrow icons to move your
web items. Choose Next.
6. Save the Web template.
a) You do not have to make any entries in the Save Web Template dialog box.
Choose Save to save your Web template.
Save the newly-created Web template in your Favorites.
give Description: ..................
give Technical name: ...........
7. Display the Web template in the browser.
a) Choose Display theWeb template in theWeb browser .
8. Exit the Web Application Wizard.
a) Choose Exit. The Wizard window closes and the Web template is opened
in the Web Application Designer where you can make additional edits
as required.
with regards,
hari kv

Create restricted key figure with navigation attributes

Hi,
I need to create a restricted key figure using attributes of 0BP_COMPET.
On my report is :
Competitors (0BP_COMPET)
Quantity
Active Competitors = Expiry Date of Minority Status greater than or equal to system date
Inactive Competitors = Expiry Date of Minority Status less than to system date
Note : Expiry Date of Minority Status is a navigation attribute of 0BP_COMPET and system date is generate by variable 0DAT - Current Calendar Day (SAP Exit).
How can i apply the formula?
Thanks

Here's a good How to Document that explains what you are trying to do ....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc
It is called How to.... Calculate with Attributes.
Brian

Can we do caculated keyfigure with in a restricted key figure

can we do caculated keyfigure with in a restricted key figure

[Hello ,|http://chandranonline.blogspot.com]
Yes, an RKF can have CKF,keyfigure and an RKF as well in the restriction.
[Thanks|http://chandranonline.blogspot.com]
[Chandran|http://chandranonline.blogspot.com]

Can we do caluculated keyfigure with in a restricted key figure

can we do caluculated keyfigure with in a restricted key figure give details

Hi,
Calculated key figures consist of formula definitions containing basic key figures, restricted key figures or precalculated key figures.
The key figures that are restricted by one or more characteristic selections can be basic key figures, calculated key figures or key figures that are already restricted.
For more help go to these links,
http://help.sap.com/saphelp_nw04s/helpdata/en/61/d0b143aa26b849b4e79a859ea1d7d1/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/13/e072abaddb574284d22361f0b824bf/content.htm
assign points if it helps
Thanks & Regards,
santo

Restricted Key Figure with interval variable

Hi,
I've a restricted key figure for KF 0AMOUNT restricted by 0FISCPER. There is a variable restriction on 0FISCPER which determines the period interval in customer exit.
e.g. 001.2008 to 009.2008
The problem is, in query this RKF is returning only the values for period 009.2008. It should return the total for all the periods.
Can you tell me what could be missing?
Regards,
Amit

Hi Amit,
please check the cutomer exit, as the range might not be properly defined in the exit.
Firstly check if the variable is defined as range or single value, and if defined as range please check the below mentioned lines in the exit:
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
as they stand for:
SIGN (I)ncluding [ ] or (E)xcluding ] [
OPT Operators: EQ =, BT [ ], LE <=, LT <, GE >=, GT >, CP, and so on.
hope it helps
Regards,
Umesh

Problem with a key figure restriction

Hi,
I have a problem with one key figure in report: in infocube, this key figure is aggrigated for all the profit centers (summation). In infocube, there is a value '150' for each profit centers (100 pieces) and in the report it is counting 150*100=15000. However, it shouldn't count the sum of all entries in the infocube but show only one value in the report which would be '150'.
I think this should be possible to do but I just don't know how. Hope somebody is able to help me. Thanks in advance.

Hi,
If the values are same for all profit center then change the Profit center infoobject property in the query design to show the maximum values for the 'calculation result as' parameter
Regards,
Vishwa,
Edited by: Vishwanath H.E on Sep 3, 2008 9:19 AM

How to build Restricted Key figures in Universe?

Hi All,
I have been trying to find a way to build restricted key figures at BO universe level.
I have gone through the best practices documents and the mdx syntax documents.
Even though building Restricted key figures at universe level is not a recommended approach, we had a requirement to achieve it.
I have tried the below possilbe ways but could succeed only half way.
Please help me and others who has been trying to build the restricted key figures at universe level by guiding us.
Eg: A restricted key figure A1 is based on a basic key figure A, with a restriction on cost element C (detail object,cost element key)
I have built A1 with below syntax and could get correct result in web intelligence report
Select block of A1 measure object in designer
<Expression>@Select(Key figures\A)</Expression>
Where block of A1 measure object in designer
<FILTER KEY="[0COSTELMNT].[LEVEL01].[[20COSTELMNT]].[Value]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="ABCD/1234567"/></CONDITION></FILTER>
But when I build another restricted key figure A2 out of basic key figure A with restriction on the same cost element key field but a different value like ="ABCD/678910".
Both A1 and A2 give correct results individually when they are dragged in a web intelligence query.
But when both of them are required to be dragged in the same query , no result comes because of the conflicting where clauses,as cost element key can't have both values at same time.
Then I tried building A1 in below ways, as mentioned in the mdx examples document
Trial 1:
Select block of A1 measure object in designer
<Expression>(@Select(Key figures\A),[0COSTELMNT].[LEVEL01].[[20COSTELMNT]].[Value].[ABCD/1234567])</Expression>
Trial 2:
Select block of A1 measure object in designer
<Expression>(@Select(Key figures\A),[0COSTELMNT].[ABCD/1234567])</Expression>
Trial 3:
Select block of A1 measure object in designer
<Expression>([Measures].[D787I2PW5YTGMTKL83RWBH80W],[0COSTELMNT].[ABCD/1234567])</Expression>
All the above expressions parse OK at universe level. Trial 1 gives a database error while running the query.
Trial 2 and Trial 3 nither throw any error nor return any result for A1.
If any one has tried and succeeded in implementing restricted key figures at universe level,please provide us some inputs.
Thank You.
Naresh

Hi,
this seems to be identical to this one:
Re: Condition Object for previous month data on current month input
I would suggest you close one of them as two entries asking the same is not a good idea
Ingo

Customer Ext Variable is NOT working correctly in the Restricted Key Figure

Hi all,
   I have created a variable ZVCBLMTH (Period from 01/1996 to Last Month) with reference to
    0CALMONTH and it will be populated through Customer Exit and it works fine.
    In the selection for 0CALMONTH, I gave the range as '05/2008' to '08/2008' and this new
    variable passed the value of range as '01/1996' to '04/2008' in RSRT.
    The properties of the variable are:
          Type of Variable - Characteristic, Processing by - Customer Exit, Variable Represents - Interval
          and Variable is - Optional.
          No change in the result after changing the 'Variable is' from Optional to 'Mandatory'.
This variable is used in Restricted Key Figure to calculate the number of matching records between
   01/1996 & 04/2008 and somehow it is not recognizing this variable and NOT passing the results correctly.
   But, there are records with 0CALMONTH between 01/1996 & 04/2008.
   How could I test that which value is passed into the Restricted Key Figure for this variable, PLEASE ?
   Thanks in advance.
Regards,
Venkat.

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Query Designer restricted key figures using a prompt value

Hallo Experts,
I would like to restrict key figures after user has beeen prompted to enter a date. I have 2 key figures:
a) KF1, Date1
b) KF2, Date2
User should be prompted to select a specific date: e.g. 01/2011. After selecting/entering the prompted date value, it should be given to date objects for intance Date1=01/2011 and Date2=01/2011.
How could I achieve it in Query Designer without using customer_exit function? Reason is that non-experienced users will use this report and they should not be confronted with complex query. Do you have any idea?
Many thanks
Mamadu

Hi,
I assume that you need to restrict the value of keyfigures by date based on user input data on variable selection screen.
First create one user input variable on your date field say for eg calday.
Now restrict your KF1 with calday and choose that vairable which you created.
For second KF2 which seems to me need to be restricted with offset of +1 based on the date entered by the user.
So restrict this KF2 with calday and use the same variable with offset of +1
I just misunderstood you ned calmonth or day because in requirement you have given month but you are calling it as date.
If its month then replace calday with calmonth..
Hope it helps.
Regards,
AL:
Edited by: AL1112 on Dec 21, 2011 9:42 AM

One Variable 2 Restricted key figures on 2 different Dimensions

Hi all,
Here is my problem:
I have a cube based on SD sales items. I want to calculate 2 retricted key figures on the 0net_value retricted by a date.
The first key would be restricted by the installation date, and the second one by the cancellation date.
Those two dates are set using a user input.
When I try to do this here the error message I get:
"Variable ZD_CSDATE is used in both (structure) element EL099Z0TL38F14TMC6AL7XKQD, and element EN4ZFAZEYGZ36B06JU04297W5 for various characteristics (0CANC_DATE, 0UCINSTDATE). This is not permitted as the characteristic is required for the F4 value help structure."
I created 2 variables set by customer exit, this solve the problem but is not convenient at all. So who could use one and only one variable or how can create a variable by copy of another one?
Thanks
Matthieu


Hi
 
I am sure you can make more than one Restricted Key Figures which are restricted to same variable value for some Characteristic. And secondly there is no easy copy and paste option to create 2 Customer Exit Variables. You need to find out the ABAP Code written using T-Code: CMODE for the Variable Exit and there you can copy and paste a part of this code to populate new variable. If you check the ABAP Code, you would understand what I am saying. 
I am more surprised at that F4 Help in the error message. Please investigate more in that direction.
 Hope it helps.
 
Cheers
Abhijit
 * It's a good habit to reward someone with points in SDN if you think his/her
response was helpful to you

[sapsem] BI-IP: Documents with restricted key figures in WAD

Similar Messages

Maybe you are looking for