SAPSQL_ARRAY_INSERT_DUPREC dump while saving PO in ME22N
Hi All,
SAPSQL_ARRAY_INSERT_DUPREC dump while updating PO in ME22N.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"/SAPSLL/OBJIDX_DB_UPDATE_R3" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
I tried to find SNOTE for this, but cannot find for ECC5.0. Can anybody help.
Thanks.
This occurs because you try to insert a data with a key that already exists on the database.
I had once a similar problem with ME22 and I solved it by debugging and discovering which was the corrupt data. I think there was an error during PO savingand not all data was inserted, leaving some inconsistent data in tables. Later, when you try to save the purchase order, a data with same key is generated and tried to be inserted. If this is your case, you have two options: complete the data manually (inserting data in necessary tables) or delete the inconsistent data.
Regards.
Similar Messages
-
Hi all,
System is giving dump while saving the changes in the project.
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Profitability segment number 0026636665 does not exist in operating conc
ern XXXX!
Long text of error message:
Diagnosis
The system discovered a serious inconsistency in the data basis of
Profitability Analysis (CO-PA) This message should never occur in
the course of normal operations.
The system tried to find characteristics from the segment table
CE4XXXX using the segment number 0026636665 in operating concern
This profitability segment number does not exist.
This can occur if you have deleted data from table CE4XXXX and have
already assigned data to profitability segments in this operating
concern.
Another cause may be that you have changed the assignment of your
controlling area to an operating concern. When this happens, the
system tries to interpret the segment numbers in the new operating
concern.
System Response
Do not continue processing.
Procedure
The data in the segment table needs to be reconstructed. It may be
possible to re-enter the assignments to profitability segments.
Look in OSS for notes regarding error message KE499. You may find
information there that could help you solve the error.
Otherwise contact your CO-PA consultant or create a problem
message.
Technical information about the message:
Message class....... "KE"
Number.............. 499
Variable 1.......... 0026636665
Variable 2.......... "XXXX"
Variable 3.......... " "
Variable 4.......... " "
Process -
From WBS element user fields, charactertics value are assigned to profitability segment through derivation rule
WBS element values settles to Profitability segmnet.
WBS element has system staus REL ACPT RESA SETC
System is giving dump while saving any changes in the project. can anybody tell what is root cause and solution for this issue?
Thanks,
SudhirRequest you to refer this note 199959. Take help of you CO cosultant.
Edited : Request you to check with your CO consultant as PSG has been deleted, take help fo ABAP as well. ( May be above note may not help you much, WIth help of ABAP and CO define problem and than seach with your message KE499 in Service market place ) That would be better approach.
With Regards
Nitin P.
Edited by: Nitin Patoliya on Mar 10, 2010 5:02 PM -
Hi,
I was doing my config from quite a while and was able to save sales orders normally. All of a sudden, I am now unable to save any sales orders. It is throwing a dump while I am trying to save the sales order. The dump details are provided below. I tried debugging the code to an extent and realized that there is some error in acessing access sequences in output determination. Can someone guide me to fix this error please?
Please find the dump below:
Runtime Errors SAPSQL_INVALID_FIELDNAME
Exception CX_SY_DYNAMIC_OSQL_SEMANTICS
Occurred on 23.10.2008 at 09:09:10
One of the field names in the SELECT clause was not recognized.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLV61Z " had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYNAMIC_OSQL_SEMANTICS',
was neither
caught nor passed along using a RAISING clause, in the procedure "SEL_KONDTAB"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The SELECT clause was specified in an internal table at runtime.
It contains the field name "DATBI", but this does not occur in any of
the database tables listed in the FROM clause.
How to correct the error
The exception must either be prevented, caught within the procedure
"SEL_KONDTAB"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Check the field names in the SELECT clause.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_INVALID_FIELDNAME" CX_SY_DYNAMIC_OSQL_SEMANTICSC
"SAPLV61Z " or "LV61ZU01 "
"SEL_KONDTAB"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "sap_server"
Network address.......... "10.1.1.193"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "2x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "SAP_SERVER"
Database type............ "ORACLE"
Database name............ "NX1"
Database owner........... "SAPNX1"
Character set............ "English_United State"
SAP kernel............... "620"
Created on............... "Aug 5 2002 21:33:12"
Created in............... "NT 5.0 2195 Service Pack 2 x86 MS VC++ 12.00"
Database version......... "OCI_817_SHARE "
Patch level.............. "252"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.."
SAP database version..... "620"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
User, transaction...
Client.............. 800
User................ "SAPUSER"
Language key........ "E"
Transaction......... "VA01 "
Program............. "SAPLV61Z "
Screen.............. "SAPMV45A 4001"
Screen line......... 61
Information on where termination occurred
The termination occurred in the ABAP program "SAPLV61Z " in "SEL_KONDTAB".
The main program was "SAPMV45A ".
The termination occurred in line 495 of the source code of the (Include)
program "LV61ZU01 "
of the source code of program "LV61ZU01 " (when calling the editor 4950).
Processing was terminated because the exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
occurred in the
procedure "SEL_KONDTAB" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "SAPLV61Z ". Its source code starts in line 225
of the (Include) program "LV61ZU01 ".
Source code extract
004650 IF SE_PRESTEP = YES OR
004660 SE_READ_ONLY_ONE_RECORD = YES.
004670 IF T681-KSDAT IS INITIAL.
004680 IF SE_READ_ALL_PRESTEP IS INITIAL.
004690 SELECT * FROM (T681-KOTAB) APPENDING TABLE KOND_TAB
004700 UP TO 1 ROWS
004710 WHERE KAPPL = SE_KAPPL
004720 AND KSCHL = SE_KSCHL
004730 AND (CODING_TAB).
004740 H_SUBRC = SY-SUBRC.
004750 ELSE.
004760 SELECT * FROM (T681-KOTAB) APPENDING TABLE KOND_TAB
004770 WHERE KAPPL = SE_KAPPL
004780 AND KSCHL = SE_KSCHL
004790 AND (CODING_TAB).
004800 ENDIF.
004810
004820 * it is enough to find one record in prestep
004830 * (care must be taken with pool tables - depending on database this
004840 * will cost performance instead of saving)
004850 IF SELECT_SPLIT NE 0 AND H_SUBRC NE 0.
004860 MODIFY CODING_TAB FROM CODING_ALTER INDEX SELECT_SPLIT.
004870 SELECT * FROM (T681-KOTAB) APPENDING TABLE KOND_TAB
004880 UP TO 1 ROWS
004890 WHERE KAPPL = SE_KAPPL
004900 AND KSCHL = SE_KSCHL
004910 AND (CODING_TAB).
004920 ENDIF.
004930 ELSE.
004940 IF SE_READ_ALL_PRESTEP IS INITIAL.
SELECT * FROM (T681-KOTAB) APPENDING TABLE KOND_TAB
004960 UP TO 1 ROWS
004970 WHERE KAPPL = SE_KAPPL
004980 AND KSCHL = SE_KSCHL
004990 AND DATBI >= SE_DATE
005000 AND DATAB <= SE_DATE
005010 AND (CODING_TAB).
005020 H_SUBRC = SY-SUBRC.
005030 ELSE.
005040 SELECT * FROM (T681-KOTAB) APPENDING TABLE KOND_TAB
005050 WHERE KAPPL = SE_KAPPL
005060 AND KSCHL = SE_KSCHL
005070 AND DATBI >= SE_DATE
005080 AND DATAB <= SE_DATE
005090 AND (CODING_TAB).
005100 ENDIF.
005110
005120 IF SELECT_SPLIT NE 0 AND H_SUBRC NE 0.
005130 MODIFY CODING_TAB FROM CODING_ALTER INDEX SELECT_SPLIT.
005140 SELECT * FROM (T681-KOTAB) APPENDING TABLE KOND_TAB
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 4 SY-INDEX 1
SY-TABIX 17 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 1 SY-LINNO 1
SY-COLNO 1 SY-PFKEY U
SY-UCOMM SICH SY-TITLE Create Sales Order: Overview
SY-MSGTY E SY-MSGID FI
SY-MSGNO 011 SY-MSGV1 AUD
SY-MSGV2 SY-MSGV3
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
Program
Include Line
Class
1 FORM SEL_KONDTAB
SAPLV61Z
LV61ZU01 495
2 FUNCTION SD_COND_ACCESS
SAPLV61Z
LV61ZU01 196
3 FORM KOMT2_AUFBAUEN
SAPLV61B
LV61BF0K 78
4 FORM KONDITIONSVORSTEP
SAPLV61B
LV61BF0K 275
5 FORM COND_ACCESS_V1
SAPLV61B
LV61BMES 417
6 FUNCTION MESSAGING
SAPLV61B
LV61BU50 81
7 FORM NACHRICHTEN_POSITION
SAPMV45A
MV45AF0N_NACHRICHTEN_POSITION 81
8 FORM BELEG_BEARBEITEN_ENDE
SAPMV45A
MV45AF0B_BELEG_BEARBEITEN_ENDE 268
9 FORM BELEG_SICHERN
SAPMV45A
MV45AF0B_BELEG_SICHERN 270
10 FORM FCODE_SICH
SAPMV45A
MV45AF0F_FCODE_SICH 9
11 FORM FCODE_BEARBEITEN
SAPLV00F
LV00FF0F 90
12 FUNCTION SCREEN_SEQUENCE_CONTROL
SAPLV00F
LV00FU02 44
13 FORM FCODE_BEARBEITEN
SAPMV45A
MV45AF0F_FCODE_BEARBEITEN 90
14 MODULE (PAI) FCODE_BEARBEITEN
SAPMV45A
MV45AI0F_FCODE_BEARBEITEN 8
Chosen variables
1 FORM SEL_KONDTAB
SAPLV61Z
LV61ZU01 495
SE_KSCHL EXEM
4544
585D
CODING_TAB[] Table IT_44581x256
67050000E0006100000000000000FFFF0200C300
07320000F200A100100001000000FFFF47308600
... + 40
0000C020
A0001400
SY-REPID SAPLV61Z
5454533522222222222222222222222222222222
310C661A00000000000000000000000000000000
KOND_TAB[] Table IT_39140x480
3FC50000E00040000000E0000000FFFF02009000
03A100003100AF00000001000000FFFF47308A00
... + 40
0000C000
A0001E00
KOMGM
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240 00
233222222222222
000000000000000
SE_READ_ALL_PRESTEP
2
0
T681 B998V1B998
4333534333222222222222222222222222222222
2998612998000000000000000000000000000000
... + 40 X3 000
53233322222222222222222222
83000000000000000000000000
%_DUMMY$$
2222
0000
T681-KOTAB B998
433322222222222222222222222222
299800000000000000000000000000
CONDITION_IN_MEMORY_INTERNAL
2
0
KOMGR
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
22222222222222222222222222222222222222
00000000000000000000000000000000000000
SE_KAPPL V1
53
61
*KOMGR
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
22222222222222222222222222222222222222
00000000000000000000000000000000000000
KOMK 800 AUD 0000000001100
3332222222222222222222245423333333333333
8000000000000000000000015400000000001100
... + 40 0001MEL 21 AU VIC AUD A
3333444222332245254422222224542222222224
0001D5C000210015069300000001540000000001
... + 80 UD AUD #####0000000000000010050000
5422454222222000003333333333333333333333
54001540000000000C0000000000000010050000
... + 120 00100500000010050000001005
3333333333333333333333333322222222222222
0010050000001005000000100500000000000000
... + 160 000000000001###V SABI0120081023200
2222223333333333330005254443333333333333
00000000000000000100C6031290120081023200
... + 200 81023200810232008102320081023CIFdandenon
3333333333333333333333333333344466666666
8102320081023200810232008102339641E45EFE
... + 240 g
622222222222222
700000000000000
SE_DATE 20081023
33333333
20081023
KOMP 000010000000000000000857 MEL VI
3333333333333333333333332222222222444254
0000100000000000000008570000000000D5C069
... + 40 C
4222222222222222222222222222222222222222
3000000000000000000000000000000000000000
... + 80 04 MEL ##############
2332222444222222222220000000000000022222
0040000D5C00000000000000000C000000C00000
... + 120 015
2222222222222222222222222222333222222222
0000000000000000000000000000015000000000
... + 160 ###### 000010
2222222000000222222233333322222222222222
000000000000C000000000001000000000000000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240
222222222222222
000000000000000
2 FUNCTION SD_COND_ACCESS
SAPLV61Z
LV61ZU01 196
APPLICATION V1
53
61
CALL_MODUS A
4
1
CONDITION_TYPE EXEM
4544
585D
DATE 20081023
33333333
20081023
HEADER_COMM_AREA AUD 0000MEL 00000110021
2222222222454233334442333333333332222222
000000000015400000D5C0000001100210000000
... + 40 0000001005000000100500000
2222222222222223333333333333333333333333
0000000000000000000001005000000100500000
... + 80 0100500000010050000000000CIF020001200810
3333333333333333333333333444333333333333
0100500000010050000000000396020001200810
... + 120 231######0#AUD YOR C CA
3330000003045422222222222222225452422244
2310000030C15400000000000000009F20300031
... + 160 CCCCCCCH 00000000
2222444444442222222333333332222222222222
0000333333380000000000000000000000000000
... + 200
222222222222222222222222
000000000000000000000000
KOPRT_I 00000003001 KRML00
3333333333322224544332222222222222222222
000000030010000B2DC000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222
0000000000000000000000000
NO_MEM_IMPORT
2
0
POSITION_COMM_AREA 0000100000000000000008570000000000000008
3333333333333333333333333333333333333333
0000100000000000000008570000000000000008
... + 40 57 015 T
3322222222222222222222222222223332222225
5700000000000000000000000000000150000004
... + 80 AN 100001100055555004##############K
4422222333333333333333333000000000000004
1E00000100001100055555004000000C000000CB
... + 120 AR #
4522222222222222222222222222222222222220
1200000000000000000000000000000000000000
... + 160 ### 000001######0#u0153 #################
0002223333330000003092200000000000000000
C0C0000000010000030CC000000010C0000010C0
... + 200 #######KAR######%#######u201EKG ########
0000000445000000200000008544200000000222
000010CB120000075C0000064CB700000000C000
... + 240 01MEL MEL1
334442222244432
01D5C00000D5C10
PRESTEP X
5
8
PROTOCOL_ACCESS X
5
8
PROTOCOL_DATE
2
0
READ_ALL_PRESTEP
2
0
READ_ONLY_ONE_RECORD X
5
8
SDPROTHEAD_I CONDB0000000000
2222222222222244444333333333322222222222
000000000000003FE42000000000000000000000
... + 40 00000000000000
222222233333333333333
000000000000000000000
T682I_I BV1EXEM03998## 000X
453454433333002233352
261585D039980C0000080
CONDITION_IS_IN_MEMORY #############
0000000000000
0000000000000
CONDITION_IS_PURELY_HEADER X
5
8
CONDITION_RECORDS[] Table IT_44400x119
3C15EA15E0005100000070000000FFFF0F004200
01C20DC2C2008100000070000000FFFF4C408500
... + 40
0000C020
10001400
POSITION_COMM_AREA_DYNAMIC
2222
0000
KOMPAZD
2222222222
0000000000
SYST ########################d###############
0000000010000000000000006000000000000000
1000100010001000000000004000000000000000
... + 40 ####################################|###
0000000000000000000000000000000000007000
100010001000000010000000000000000000C100
... + 80 ################S#######################
0000000000000000500000000000000000000000
0000000000004000310000000000000000000000
... + 120 ####################################¶###
000000000000000000000000000000001000B000
00000000000000000000000000000000D0006000
... + 160 ####ÿ####### u0152##XC############# E0 4
0000F0000000A800540000000000000222432223
0000F00000000C00830040000C0000C000500004
... + 200 001LIST N ####__S 800
3334455222420000555222222222222222223332
001C934000E01000FF3000000000000000008000
... + 240 00
222223322222222
000000000000000
SY-XFORM CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
CONDITION_RECORDS 800V1VEN0
3335354432222222222222222222222222222222
8006165E00000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 0000002101
222222222222222222222222222223333333333
000000000000000000000000000000000002101
SY-XPROG SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
KOPF_POS_UNLOAD UNLOAD_COMMUNI_BV1
544444544445445453
5ECF14F3FDD5E9F261
3 FORM KOMT2_AUFBAUEN
SAPLV61B
LV61BF0K 78
SY-TABIX 17
1000
1000
*KOMKBNF
2222222222222222
0000000000000000
KOMKBWA
2222
0000
TYP_TNAPR 8
3
8
%_DUMMY$$
2222
0000
KOPRT 00000003001 KRML004502009
3333333333322224544333333333222222222222
000000030010000B2DC004502009000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222
0000000000000000000000000
C_EVENT 9
3
9
XSUBRC 0
0000
0000
KOMPBME ### 00000000
0002222222222222222222222222233333333222
00C0000000000000000000000000000000000000
... + 40 0000
2222222222222222222222233332222222222222
0000000000000000000000000000000000000000
... + 80
22222
00000
KOMKBME-UNAME
222222222222
000000000000
KOMT1-KAPPL V1
53
61
KOMT1-KSCHL EXEM
4544
585D
HEADER_COMM AUD 0000MEL 00000110021
2222222222454233334442333333333332222222
000000000015400000D5C0000001100210000000
... + 40 0000001005000000100500000
2222222222222223333333333333333333333333
0000000000000000000001005000000100500000
... + 80 0100500000010050000000000CIF020001200810
3333333333333333333333333444333333333333
0100500000010050000000000396020001200810
... + 120 231######0#AUD YOR C CA
3330000003045422222222222222225452422244
2310000030C15400000000000000009F20300031
... + 160 CCCCCCCH 00000000
2222444444442222222333333332222222222222
0000333333380000000000000000000000000000
... + 200
222222222222222222222222
000000000000000000000000
<%_TABLE_TNAD1> ???
ITEM_COMM 0000100000000000000008570000000000000008
3333333333333333333333333333333333333333
0000100000000000000008570000000000000008
... + 40 57 015 T
3322222222222222222222222222223332222225
5700000000000000000000000000000150000004
... + 80 AN 100001100055555004##############K
4422222333333333333333333000000000000004
1E00000100001100055555004000000C000000CB
... + 120 AR #
4522222222222222222222222222222222222220
1200000000000000000000000000000000000000
... + 160 ### 000001######0#u0153 #################
0002223333330000003092200000000000000000
C0C0000000010000030CC000000010C0000010C0
... + 200 #######KAR######%#######u201EKG ########
0000000445000000200000008544200000000222
000010CB120000075C0000064CB700000000C000
... + 240 01MEL MEL1
334442222244432
01D5C00000D5C10
KOMKBWR-ERNAM
222222222222
000000000000
KOMPBWR-ERNAM
222222222222
000000000000
*TNAD1-VKORG
2222
0000
G_SDPROTHEAD CONDB0000000000
2222222222222244444333333333322222222222
000000000000003FE42000000000000000000000
... + 40 00000000000000
222222233333333333333
000000000000000000000
T682I BV1EXEM03998## 000X
453454433333002233352
261585D039980C0000080
RSJOBINFO 00000000
2222222222222222222222222222222233333333
0000000000000000000000000000000000000000
... + 40 000000
3333332222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 ####
0000
0000
HEADKZ X
5
8
<%_TABLE_TNAD2> ???
KONDTAB[] Table IT_44400x119
3C15EA15E0005100000070000000FFFF0F004200
01C20DC2C2008100000070000000FFFF4C408500
... + 40
0000C020
10001400
*TNAD2-VKORG
2222
0000
*TNAD2-VTWEG
22
00
SY-REPID SAPLV61B
5454533422222222222222222222222222222222
310C661200000000000000000000000000000000
*TNAD2-SPART
22
00
SYST-REPID SAPLV61B
5454533422222222222222222222222222222222
310C661200000000000000000000000000000000
4 FORM KONDITIONSVORSTEP
SAPLV61B
LV61BF0K 275
%_SPACE
2
0
SY-SUBRC 4
0000
4000
SY ########################d###############
0000000010000000000000006000000000000000
1000100010001000000000004000000000000000
... + 40 ####################################|###
0000000000000000000000000000000000007000
100010001000000010000000000000000000C100
... + 80 ################S#######################
0000000000000000500000000000000000000000
0000000000004000310000000000000000000000
... + 120 ####################################¶###
000000000000000000000000000000001000B000
00000000000000000000000000000000D0006000
... + 160 ####ÿ####### u0152##XC############# E0 4
0000F0000000A800540000000000000222432223
0000F00000000C00830040000C0000C000500004
... + 200 001LIST N ####__S 800
3334455222420000555222222222222222223332
001C934000E01000FF3000000000000000008000
... + 240 00
222223322222222
000000000000000
INCL_ZUGRIFFSFOLGE X
5
8
NO
2
0
KOMT1-KOZGF EXEM
4544
585D
NACH-KSCHL
2222
0000
T683S-KAUTO
2
0
KOMKBMM
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222
0000000000000
HEADER_COMM AUD 0000MEL 00000110021
2222222222454233334442333333333332222222
000000000015400000D5C0000001100210000000
... + 40 0000001005000000100500000
2222222222222223333333333333333333333333
0000000000000000000001005000000100500000
... + 80 0100500000010050000000000CIF020001200810
3333333333333333333333333444333333333333
0100500000010050000000000396020001200810
... + 120 231######0#AUD YOR C CA
3330000003045422222222222222225452422244
2310000030C15400000000000000009F20300031
... + 160 CCCCCCCH 00000000
2222444444442222222333333332222222222222
0000333333380000000000000000000000000000
... + 200
222222222222222222222222
000000000000000000000000
ITEM_COMM 0000100000000000000008570000000000000008
3333333333333333333333333333333333333333
0000100000000000000008570000000000000008
... + 40 57 015 T
3322222222222222222222222222223332222225
5700000000000000000000000000000150000004
... + 80 AN 100001100055555004##############K
4422222333333333333333333000000000000004
1E00000100001100055555004000000C000000CB
... + 120 AR #
4522222222222222222222222222222222222220
1200000000000000000000000000000000000000
... + 160 ### 000001######0#u0153 #################
0002223333330000003092200000000000000000
C0C0000000010000030CC000000010C0000010C0
... + 200 #######KAR######%#######u201EKG ########
0000000445000000200000008544200000000222
000010CB120000075C0000064CB700000000C000
... + 240 01MEL MEL1
334442222244432
01D5C00000D5C10
APPLIKATION V1
53
61
%_VIASELSCR #
0
4
SCREEN BT_PVMV
4555545222222222222222222222222222222222
24F06D6000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120 BTA 00001#00000 ####
2222222222222224542222223333303333320000
0000000000000002410000000000100000000000
SY-XFORM CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
5 FORM COND_ACCESS_V1
SAPLV61B
LV61BMES 417
KOMKBNF
2222222222222222
0000000000000000
KOMKBV1 AUD 0000MEL 00000110021
2222222222454233334442333333333332222222
000000000015400000D5C0000001100210000000
... + 40 0000001005000000100500000
2222222222222223333333333333333333333333
0000000000000000000001005000000100500000
... + 80 0100500000010050000000000CIF020001200810
3333333333333333333333333444333333333333
0100500000010050000000000396020001200810
... + 120 231######0#AUD YOR C CA
3330000003045422222222222222225452422244
2310000030C15400000000000000009F20300031
... + 160 CCCCCCCH 00000000
2222444444442222222333333332222222222222
0000333333380000000000000000000000000000
... + 200
222222222222222222222222
000000000000000000000000
KOMPBV1 0000100000000000000008570000000000000008
3333333333333333333333333333333333333333
0000100000000000000008570000000000000008
... + 40 57 015 T
3322222222222222222222222222223332222225
5700000000000000000000000000000150000004
... + 80 AN 100001100055555004##############K
4422222333333333333333333000000000000004
1E00000100001100055555004000000C000000CB
... + 120 AR #
4522222222222222222222222222222222222220
1200000000000000000000000000000000000000
... + 160 ### 000001######0#u0153 #################
0002223333330000003092200000000000000000
C0C0000000010000030CC000000010C0000010C0
... + 200 #######KAR######%#######u201EKG ########
0000000445000000200000008544200000000222
000010CB120000075C0000064CB700000000C000
... + 240 01MEL MEL1
334442222244432
01D5C00000D5C10
APPLIKATION V1
53
61
6 FUNCTION MESSAGING
SAPLV61B
LV61BU50 81
KOMKBWN
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
22
00
APPLIKATION V1
53
61
SCHEMA V10000
533333
610000
PI_OBJTYPE VBAP
5445222222
6210000000
TYP_FRVOR C
4
3
G_OBJTYPE VBAP
5445222222
6210000000
G_ITEM X
5
8
PI_ITEM X
5
8
KOMK V10000##########
5333330000000000
6100000010007000
KOMK-KALSM V10000
533333
610000
L_CONDITION_FORM COND_ACCESS_V1
4444544445555322222222222222222222222222
3FE4F133533F6100000000000000000000000000
KOMKBMR
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222
0000000000000000000000
L_RC 0
0000
0000
KOMKBPA
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222
0000000000000000000000000
7 FORM NACHRICHTEN_POSITION
SAPMV45A
MV45AF0N_NACHRICHTEN_POSITION 81
VBMUEZ 0000
2222222222233332222222222222222222222222
0000000000000000000000000000000000000000
... + 40 ##
2222200
000000C
SY-SUBRC 4
0000
4000
SYST-REPID SAPMV45A
5454533422222222222222222222222222222222
310D645100000000000000000000000000000000
STEUERUNG BEDINGUNG_PRUEFEN_001
444444544555544445333
2549E75E7F025565EF001
VBUP 800 000010 CAA AA CCCC
3332222222222333333224442224422444422222
8000000000000000010003110001100333300000
... + 40
222222222222222
000000000000000
YVBUP 000000
2222222222222333333222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222
0000000000000000
IVBPA1_EINTRAG_AKTUELL 0
0000
0000
VBAP 800 000010000000000000000857000
3332222222222333333333333333333333333333
8000000000000000010000000000000000857000
... + 40 000000000000857
3333333333333332222222222222222222222222
0000000000008570000000000000000000000000
... + 80 015 Pattu Bombay Sandwitch Chutn
2223332222225677724666672566676766246776
0000150000000144502FD219031E47943803854E
... + 120 ey TAN A000000000000 1000011
6722222222225442224333333333333223333333
59000000000041E0001000000000000001000011
... + 160 00055555004##############KAR######KAR###
3333333333300000000000000445001001445000
00055555004000000C000000CB1200C00CB12000
... + 200 ###########00000000#######
0000000000033333333000000022222222222222
000C000000C00000000000000C00000000000000
... + 240
222222222222222
000000000000000
IVBEP 000000 00000000002008102310000000000####
3333332333333333333333333333333333330000
0000000000000000020081023100000000000000
... + 40 ########
2222222200000000
0000000000000000
VBKD 800 000000 21000001 CIFdanden
3332222222222333333223333333322444666666
800000000000000000000210000010039641E45E
... + 40 ong X #####0000000
6662222222222222222222522222000003333333
FE700000000000000000008000000000C0000000
... + 80 0000001 #####2008102320081023000000000
3333333222000003333333333333333333333333
00000010000100C2008102320081023000000000
... + 120 000000##### 000002
3333330000022222222222222222222223333332
0000000100C00000000000000000000000000020
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200 1000
2222222222222222223333222222222222222222
0000000000000000001000000000000000000000
... + 240 00
222222222222233
000000000000000
IVBEP_KEY 000010 00000000002008102710000000002
333333233333333333333333333333333333
000010000000000002008102710000000002
PART[] Table IT_44305x169
0F15EF15E00041000000A0000000FFFF0000A300
839282925200E100500090000000FFFF40000510
... + 40
1000C220
00001400
IVBEP_KEY1 000010 0000000000200810271000000
33333323333333333333333333333333
00001000000000000200810271000000
XVBPA[] Table IT_17425x542
A0E52CD58000C000000010000000FFFF00007D00
03810BD19000E6005000E2000000FFFF44008D00
... + 40
1000D200
00001480
SVBEP ####
0000
1000
TVAK-KAPPL V1
53
61
US_VBEPKOM 00000000000000 000000#######00000000 000
3333333333333323333330000000333333332333
000000000000000000000000000C000000000000
... + 40 000 0000 0000000000000000000000000000
3332223333223333333333333333333333333333
0000000000000000000000000000000000000000
... + 80 0000000000000000000000000000
3333333333333333333333333333222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 00
2222222222222222222222222222222222222233
0000000000000000000000000000000000000000
... + 200 000000000000
33333333333322
00000000000000
XOBJKY_POS 000010
222222222233333322222222222222
000000000000001000000000000000
CHARX X
5
8
IVBEP_TABIX_ZEILE_1 0
0000
0000
BUSINESSOBJEKT_POS VBAP
5445222222
6210000000
US_VBEPKOMX 0000000000
33333333332222222222222222222222
00000000000000000000000000000000
TVAP-KALSM V10000
533333
610000
IVBEP_TABIX_AKTUELL 1
0000
1000
%_SPACE
2
0
8 FORM BELEG_BEARBEITEN_ENDE
SAPMV45A
MV45AF0B_BELEG_BEARBEITEN_ENDE 268
WK_ABRUF_EXIST
2
0
SY-BINPT
2
0
BI_INFO-CTU_AMODUS
2
0
CATTAKTIV
2
0
%_ARCHIVE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240
222222222222222
000000000000000
SY-REPID SAPMV45A
5454533422222222222222222222222222222222
310D645100000000000000000000000000000000
SY-MSGID FI
44222222222222222222
69000000000000000000
MAAPV ############## ##
2222222222222222222220000000000000022200
000000000000000000000000000C000000C00000
... + 40 ##### 00000000######
0000022222222222222222222233333333000000
0000C00000000000000000000000000000000000
... + 80 ######################
0000000000000000000000222222222222222222
C000000C000000C000000C000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240
222222222222222
000000000000000
FCODE_SORT_AUFLOESEN AUFL
45442222222222222222
156C0000000000000000
XVCKEY[] Tableinitial
0000FFFD
0000FFFF
SPACE
2
0
SY-MSGNO 011
333
011
ORDTAB 000000 00
2222222222333333222222222222222222222233
0000000000000000000000000000000000000000
... + 40 000000##############
3333330000000000000022222
000000000000C000000C00000
SY-MSGV1 AUD
4542222222222222222222222222222222222222
1540000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV2
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV3
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV4
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
MODIFICATION_FLAG-NO_OUTPUT_CO
2
0
CVBFA 000000 000000 ####
2222222222222333333222222222233333320000
0000000000000000000000000000000000000000
... + 40 #### ######## 00000000000000
0000222000000002222222233333333333333222
000C0000000000C0000000000000000000000000
... + 80 00 00000000 #####
2222222222222222222223322233333333200000
0000000000000000000000000000000000000000
... + 120 ### ######## 000000#######
0002220000000022222222222223333330000000
00C0000000000C00000000000000000000000000
... + 160 ################ #############
0000000000000000222000000000000022222222
0000000000000000000000000000000000000000
... + 200 ####### ####
2222222222000000022222222222000022222222
0000000000000000C00000000000000000000000
... + 240 000000 ####
222333333220000
000000000000000
PARTAB1 000000000000000
2222222222222222222222222333333333333333
0000000000000000000000000000000000000000
... + 40 000
3332222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
XVBAK_UPDKZ I
4
9
UPDKZ_DELETE D
4
4
VVBRP[] Tableinitial
0000FFFD
0000FFFF
DPP_ACTIVE
2
0
XVBKD[] Table IT_37371x565
A2C554E560009000000030000000FFFF00009C00
82C100E1C1009E00100052000000FFFF44000200
... + 40
0000C020
50001E00
XVBKD 800 000000 21000001 CIFdanden
3332222222222333333223333333322444666666
800000000000000000000210000010039641E45E
... + 40 ong X #####0000000
6662222222222222222222522222000003333333
FE700000000000000000008000000000C0000000
... + 80 0000001 #####2008102320081023000000000
3333333222000003333333333333333333333333
00000010000100C2008102320081023000000000
... + 120 000000##### 000002
3333330000022222222222222222222223333332
0000000100C00000000000000000000000000020
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200 1000
2222222222222222223333222222222222222222
0000000000000000001000000000000000000000
... + 240 00
222222222222233
000000000000000
EFFECTIVITY_CHANGED
2
0
NA_VBKD 800 000000 21000001 CIFdanden
3332222222222333333223333333322444666666
800000000000000000000210000010039641E45E
... + 40 ong X #####0000000
6662222222222222222222522222000003333333
FE700000000000000000008000000000C0000000
... + 80 0000001 #####2008102320081023000000000
3333333222000003333333333333333333333333
00000010000100C2008102320081023000000000
... + 120 000000##### 000002
3333330000022222222222222222222223333332
0000000100C00000000000000000000000000020
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200 1000
2222222222222222223333222222222222222222
0000000000000000001000000000000000000000
... + 240 00
222222222222233
000000000000000
IVBEP1 000010 00000000002008102710000000002####
3333332333333333333333333333333333330000
0000100000000000020081027100000000022000
T180-TRTYP H
4
8
IVBEP[] Table IT_40082x56
500500000000A000000030000000FFFF0000BE00
8CB2000042008F00200080000000FFFF45000400
... + 40
0000C020
01001E00
VBAK 800 20081023090832SAPUSER 0
3332222222222333333333333335455545222223
8000000000000200810230908323105352000000
... + 40 00000000000000020081023C0YOR 00000000
3333333333333333333333343545222233333333
00000000000000020081023309F2000000000000
... + 80 ######0#AUD AUD 0000100ME
2222222222222200000030454224542333333344
000000000000000000030C1540015400000100D5
... + 120 L 0000000000000000 2008
4222222222333333333333333322222222223333
C000000000000000000000000000000000002008
... + 160 10231 SABI0102F2 100
3333322222222222544433334322333222222222
1023100000000000312901026200100000000000
... + 200 1000
2222222222222222222222222222222333322222
0000000000000000000000000000000100000000
... + 240
222222222222222
000000000000000
IVBEP1[] Table IT_38442x40
0205A5C590000000000020000000FFFF00003E00
84B28DB171004F00200080000000FFFF40008D00
... + 40
9000C020
60001400
VBUK 800 CAA AA CCCCCCCCA00000
3332222222222224442222442244444444433333
8000000000000003110000110033333333100000
... + 40 000 620
3332222222222222222222222222222222233322
0000000000000000000000000000000000062000
... + 80
22222222222222222
00000000000000000
9 FORM BELEG_SICHERN
SAPMV45A
MV45AF0B_BELEG_SICHERN 270
XFPLT[] Table IT_38480x696
0000E6C5A00000000000B0000000FFFF00003200
000002B171008F00000082000000FFFF40008C10
... + 40
0000C000
A0001E00
YVBAK 00000000000000 0
2222222222222333333333333332222222222223
0000000000000000000000000000000000000000
... + 40 00000000000000000000000 00000000
3333333333333333333333322222222233333333
0000000000000000000000000000000000000000
... + 80 ########
2222222222222200000000222222222222222222
000000000000000000000C000000000000000000
... + 120 0000000000000000 0000
2222222222333333333333333322222222223333
0000000000000000000000000000000000000000
... + 160 0000 000
3333222222222222222222222222333222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240
222222222222222
000000000000000
YVBAPF[] Tableinitial
0000FFFD
0000FFFF
YVBAP[] Table IT_38540x1720
0000A6C5A00000000000B0000000FFFF0000B900
000006B1D100EF00000086000000FFFF40000E00
... + 40
0000C000
20001E00
XVBUV[] Table IT_17430x123
AE058CD58000C000000070000000FFFF00006F00
87A20AD18000F6000000B0000000FFFF44000800
... + 40
1000C020
00009400
YVBUV[] Tableinitial
0000FFFD
0000FFFF
%_DUMMY$$
2222
0000
DA_SUBRC 0
0000
0000
SYST ########################d###############
0000000010000000000000006000000000000000
1000100010001000000000004000000000000000
... + 40 ####################################|###
0000000000000000000000000000000000007000
100010001000000010000000000000000000C100
... + 80 ################S#######################
0000000000000000500000000000000000000000
0000000000004000310000000000000000000000
... + 120 ####################################¶###
000000000000000000000000000000001000B000
00000000000000000000000000000000D0006000
... + 160 ####ÿ####### u0152##XC############# E0 4
0000F0000000A800540000000000000222432223
0000F00000000C00830040000C0000C000500004
... + 200 001LIST N ####__S 800
3334455222420000555222222222222222223332
001C934000E01000FF3000000000000000008000
... + 240 00
222223322222222
000000000000000
FCODE SICH
54442222222222222222
39380000000000000000
FCODE_GLEICHE_SEITE ENT1
44532222222222222222
5E410000000000000000
XVBBE 0000000000
2222222222222333333333322222222222222222
0000000000000000000000000000000000000000
... + 40 00000000
2222222222222223333333322222222222222222
0000000000000000000000000000000000000000
... + 80 ################ 0000000000
2000000000000000022222222222223333333333
00000000C0000000C00000000000000000000000
... + 120 000
3332222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 ####################
2222222222222222222200000000000000000000
000000000000000000000000000000000000000C
... + 200 00000000 000000000000000000
2222222222233333333233333333333333333322
0000000000000000000000000000000000000000
... + 240 ###
222222222222000
000000000000000
CH_SUBRC 4
0000
4000
POSNR_NULL 000000
333333
000000
T178T
22222222222222222222222222
00000000000000000000000000
IVBPA2_PAGIND ###
000
00C
10 FORM FCODE_SICH
SAPMV45A
MV45AF0F_FCODE_SICH 9
TVAP-FPART
22
00
VTCOMWE-ALAND AU
452
150
IVBPA2_SELIND ###
000
00C
J_1BATL2T
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240
222222222222222
000000000000000
SY-XPROG SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
SY-CALLD
2
0
CHARV V
5
6
TVAK-BEZOB
2
0
11 FORM FCODE_BEARBEITEN
SAPLV00F
LV00FF0F 90
SY-MSGV1 AUD
4542222222222222222222222222222222222222
1540000000000000000000000000000000000000
... + 40
2222222222
0000000000
FCODE SICH
54442222222222222222
39380000000000000000
SY-MSGV2
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
T185F-FCINT 0
3
0
SY-MSGV3
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV4
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
AKTYP
2
0
SY-REPID SAPLV00F
5454533422222222222222222222222222222222
310C600600000000000000000000000000000000
T185-NMODUL FCODE_SICH
444445544422222222222222222222
63F45F393800000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240
222222222222222
000000000000000
T185-NPROG SAPMV45A
5454533422222222222222222222222222222222
310D645100000000000000000000000000000000
%_SPACE
2
0
MODUL-POOL SAPMV45B
5454533422222222222222222222222222222222
310D645200000000000000000000000000000000
FLAG-ENDE
2
0
T185-CRMFUNC
222222222222222222222222222222
000000000000000000000000000000
SCREEN BT_PVMV
4555545222222222222222222222222222222222
24F06D6000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120 BTA 00001#00000 ####
2222222222222224542222223333303333320000
0000000000000002410000000000100000000000
T185-FCODE SICH
54442222222222222222
39380000000000000000
12 FUNCTION SCREEN_SEQUENCE_CONTROL
SAPLV00F
LV00FU02 44
FUNKTION SICH
54442222222222222222
39380000000000000000
KOPFGRUPPE AU
4522
1500
POSITIONSGRUPPE N
4222
E000
PROGRAMM SAPMV45B
5454533422222222222222222222222222222222
310D645200000000000000000000000000000000
TYP
2
0
AKTYP
2
0
CUA_PARA1
2222222222222222
0000000000000000
CUA_PARA2
2222222222222222
000Hi Venkat,
Kindly share how this error is being fixed?
I hit the same error here...
CL_GM_ACTUAL_MGR -
Short dump while saving data after selecting '#' for variable in WI
Hello All,
We have a selection variable in our webinterface on company code.After selecting '#',i am entering data and while saving it goes to dump.
but client wants to have an error message displayed after saving data instead of runtime error (dump).so that user can select required company code.
Error analysis is:
A RAISE statement in the program "SAPLRSDRI" raised the exception
condition "ILLEGAL_INPUT".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Is there any way to get desired result?
ThanksHello Murali,
What you would need to do is to change the attributes of the variable.
1. In BPS0, you can make it as a mandatory entry.
2. In the web layout, you can create a variable for Company code and force the user to choose a value from a dropdown list.
The specific approach would depend on how the layout is being called and how it has been setup.
Hope this helps.
Sunil -
Short Dump while saving the changes in Quotation
Hi abapers,
Please solve my Problem Actually Problem with the Quotation. I have created one SAP Script and attached to VA21. now when I save the Quotation it gets saved byut when I try to open the Quotation in VA22/Va23 first it gives me a short dump but next time it opens up without any short dump.
I get a Short Dump " LOAD_PROGRAM_LOST". Short Description is : "Program "ZZV1SOCONFIRM_INCLUDE" was modified during the run.".
this is just an include which I used it in my SAP Script. Can anybody suggest me what happened with the code.
Below is the Error Anaysis in ST22.
Error analysis
While the program was running, the program "ZZV1SOCONFIRM_INCLUDE" had to be
reloaded
because a bottleneck pushed it out of the local
program buffer. However, the database was found to contain an already
changed program.Hi Mike,
I think by the time you trigger the print out of quotation, Program active version might not be generated. you might have given the print before it gets the active version.
If you are still getting the dump, then it could be problem at output config.
Regards,
Satish -
ABAP Program Giving SAPSQL_ARRAY_INSERT_DUPREC Dump While Inserting Entries
Hi Experts,
I had z table in which i had made three fields as primary key combination , i also had a custom program in which i am inserting values into the z table using Insert statement. during the execution of the program it is going for a short dump giving "SAPSQL_ARRAY_INSERT_DUPREC" With Exception CX_SY_OPEN_SQL_DB.
The Delivery Class of the Table is "C".
The thing is that i want if 1st field is "ORG ID" second Field is "Material" & the third field is "Type Id". then the system should allow entries like
ORG ID
Material Id
Type Id
|"0001" | "100'' | "R1" |
"0001"
"100''
"R2"
|"0001" | "100'' | "R3" |
"0001"
"100''
"R4"
Is there any OSS note for Corrections.
Thanks & regards
Priyesh Shah.Hi
Are you sure your table has those 3 fields as key fields?
I means you make sure the fields: ORG ID, Material Id, Type Id are key fields.
If you are sure the internal table has not duplicated records and your z-table is empty: It can only suppose some field is not a key.
If you have made some modification, try to check the database defination of your z-table is equal to dictionary defination
Max -
Update termination dump while saving sales order after updating billing pla
Hi,
Our client is facing a strange issue. The client has a sales order already created and WBS element assigned to it automatically. The sales order has many items, which are billed periodically. Whenever the particular item has to be billed. user attaches milestone in the project which is updated in the billing plan of the sales order. Then user goes into change view of sales order, and sees if the billing plan is getting updated. After user sees that billing plan is updated, he tries to save the sales order and the update termination dump comes.
We have analyzed this issue to some extent. Since the product hierarchy have been changed, the system checks for the duplicate records and throws the dump.
We have advised the user to follow following steps also:
1) Delete existing billing plan if any assigned to the order. You can delete the billing plan by going into CJ20N and deleting the existing milestones completely.
2) Please ensure network in project is release and sales order does not have credit block.
3) Change Product Hierarchy in sales order (Please do not copy and paste from Material master instead select the same through F4 for each level.
4) Once again create the milestones as required in the Project.
5) We need to remove block of billing plan from Project only instead of from Order.
6) Check order in display mode and ensure billing plan has appeared.
7) Now goto change mode of the order and carry billing.
Above solution has solved the issue but sometimes it takes times for the above solution to work.
The user has to repeatedly follow above steps to save the billing plan.
We need to have permanent solution for the same. I would appreciate if anybody can help resolve this issue.
ThanksThanks All for providing me possible solutions.
The issue is resolved by one more step into what i had suggested in my questions
At step 3, after changing the product hierarchy, I simply go to billing plan tab, thereby generating billing plan even before I add milestones in the project.
To my understanding, generating billing plan in the sales order must be conflicting with the milestone being added to the billing plan from the project, giving 2 billing plan numbers in the background and throwing update termination dump.
Cheers!! -
Hi All,
I have developed an ALV report by OOPS method. After displaying the report when I want save as local file, it dumps. Anyone received this type of dump.
Dump decription:
The current statement requires a character-type data object.
Error analysis
At the statment
"STRLEN( obj )..."
, only character-type data objects are supported at the argument
position "obj".
In this particular case, the operand "obj" has the non-charcter-type type
"P".
Please help.
Regards,
JeetuHi,
In my report there are three amount field are being displayed. Is there anything separate i need to include in field catalog for these fields. Becasue I tried with fcat-inttype = 'P' for thse amount fields I am still getting the dump. But now the dump has been changed.
Runtime Errors GETWA_NOT_ASSIGNED
Field symbol has not yet been assigned.
Error analysis
You attempted to access an unassigned field symbol
(data segment 116).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump. -
Error while saving after changing the date of a parked invoice document in MIR7
DUPREC:POS&INCOMINGINVOICE&(Invoice Number)(Fiscal Year)
Message no. CD328Hi,
Hope you are getting the dump Please check this note 1687903 - MIR4: Dump while saving parked invoice
also check the dump at ST21 for the ABAP statement whare it is getting an issue and rectify the same .
Regards, -
RUn time error while saving po Field symbol has not yet been assigned.
Hi Experts,
I am getting abap dump while saving PO in ME21N plz seee the below dump plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 106).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLKKBL" or "LKKBLF99"
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 172
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 237568
MM Used. 12036016
MM Free. 530432
er and Transaction
Client.............. 410
User................ "SAP_SUPPORT"
Language key........ "E"
Transaction......... "ME21N "
Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
Program............. "SAPLKKBL"
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
The main program was "RM_MEPO_GUI ".
In the source code you have the termination point in line 2908
of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2878 else.
2879 assign <fs11> to <field>.
2880 gs_fc = gs_sfc11.
2881 endif.
2882 when 012.
2883 if gs_out_flags-slave ne 'X'.
2884 assign <fm12> to <field>.
2885 gs_fc = gs_mfc12.
2886 else.
2887 assign <fs12> to <field>.
2888 gs_fc = gs_sfc12.
2889 endif.
2890 when 013.
2891 if gs_out_flags-slave ne 'X'.
2892 assign <fm13> to <field>.
2893 gs_fc = gs_mfc13.
2894 else.
2895 assign <fs13> to <field>.
2896 gs_fc = gs_sfc13.
2897 endif.
2898 when 014.
2899 if gs_out_flags-slave ne 'X'.Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
Error Message.
Endif.
Hope it helps,
Raj -
Dump While Executing ME21N, ME22N and ME23N
Hi,
Am getting the below Short Dump while executing ME21N, ME22N and ME23N.
Runtime Errors SYNTAX_ERROR
Date and Time 08.07.2009 15:41:00
|Short text
Syntax error in program "ME_PROCESS_PO_CUST============CP ".
|What happened?
| Error in the ABAP Application Program
|
| The current ABAP program "CL_EX_ME_PROCESS_PO_CUST======CP" had to be
| terminated because it has
| come across a statement that unfortunately cannot be executed.
|
| The following syntax error occurred in program
| "ME_PROCESS_PO_CUST============CP " in include
| "ME_PROCESS_PO_CUST============CM000 " in
| line 14:
| "The specified type cannot be converted into the target variables."
| " "
| " "
| " "
|
| The include has been created and last changed by:
| Created by: "SILABAP "
| Last changed by: "SILABAP "
| Error in the ABAP Application Program
|
| The current ABAP program "CL_EX_ME_PROCESS_PO_CUST======CP" had to be
| terminated because it has
| come across a statement that unfortunately cannot be executed.
|Error analysis
| The following syntax error was found in the program
| ME_PROCESS_PO_CUST============CP :
| "The specified type cannot be converted into the target variables."
| " "
| " "
| " "
|Trigger Location of Runtime Error
| Program CL_EX_ME_PROCESS_PO_CUST======CP
| Include CL_EX_ME_PROCESS_PO_CUST======CM001
| Row 1
| Module type (METHOD)
Module Name IF_EX_ME_PROCESS_PO_CUST~INITIALIZE
|Source Code Extract
|Line |SourceCde
|>>>>>|method IF_EX_ME_PROCESS_PO_CUST~INITIALIZE.
| 2| CLASS CL_EXIT_MASTER DEFINITION LOAD.
3
| 4| DATA l_badi TYPE REF TO ME_PROCESS_PO_CUST.
5
6
7
8
9
| 10| TRY.
11
| 12| GET BADI l_badi
| 13| CONTEXT me.
14
| 15| CALL BADI l_badi->INITIALIZE
| 16|.
17
18
19
| 20| CATCH CX_BADI_NOT_IMPLEMENTED CX_BADI_INITIAL_REFERENCE.
Please let me know is there any OSS note to resolve the Issue.
Thanks,
SubasHi,
when I try to do the same in my system SAP gives me an information message as follows:-
Changes to transported Business Add-In definitions are incompatible
Message no. ENHANCEMENT236
Diagnosis
This business add-in definition has already been transported. Subsequent changes could invalidate existing business add-in implementations.
System Response
The runtime behaviour is no longer predictable. Syntax errors or short dumps may occur.
Procedure
If possible, do not make these changes. Alternatively, create a new business add-in definition incorporating the changes and use it, along with the existing definition.
It clearly indicates that the BADI definition should not be changed if active implementations already exists.
I am really now not sure how to solve your issue.
Try deactiviting the standard BADI implementation.
Then again add the filter and then remove it.
And then try activating the BADI implementation once again.
Regards,
Ankur Parab -
While saving the delivery no in VA02 dump error showing (Arithmatic overflo
Hi,
while saving the delivery no in VA02, one dump error getting displayed.
Arithmatic over flow occurs.
Can any one can say how to rectify the program to avoid dump error
The below lines are showing in dump.
Waiting for quick response.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
caught in
procedure "USEREXIT_SAVE_DOCUMENT_PREPARE" "(FORM)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An overflow was discovered in an ongoing arithmetical operation with
operands of type P. Possible causes are:
1. The result field of type P is too small for the result.
2. The result or a intermediate result has more than 31 decimal places.
How to correct the error
The result field must be enlarged, if this is still possible. It may
also be possible to break up the current process into subprocesses so
that only smaller values occur.
There may already be a solution to the error in the SAP notes system.
If you have access to the SAP notes system first try searching with the
following keywords:
"COMPUTE_BCD_OVERFLOW"
"BCD_FIELD_OVERFLOW" (Until release 4.0a, this runtime error occurred at this
position)
"SAPMV50A" or "ZSDI_MV50AFZ1_CRPC_CALC_4QA"
"USEREXIT_SAVE_DOCUMENT_PREPARE" ***----
Information on where terminated
Termination occurred in the ABAP program "SAPMV50A" - in
"USEREXIT_SAVE_DOCUMENT_PREPARE".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 666
of the (Include) program "ZSDI_MV50AFZ1_CRPC_CALC_4QA".
The termination is caused because exception "CX_SY_ARITHMETIC_OVERFLOW"
occurred in
procedure "USEREXIT_SAVE_DOCUMENT_PREPARE" "(FORM)", but it was neither handled
locally nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPMV50A "; its source code begins in line
208 of the (Include program "MV50AFZ1 ".
657 ADD: xvbap-brgew TO l_w_tot_list_vals-brgew,
658 xvbap-zzlogpoint TO l_w_tot_list_vals-zlogpoint,
659 xvbap-zztotgrossvalue TO
660 l_w_tot_list_vals-totgrossvalue.
661
662
663 l_w_tot_list_vals-gewei = xvbap-gewei.
664
665 IF NOT xvbap-pstyv IN zzt_free.
>>>>> ADD xvbap-volum TO l_w_tot_list_vals-volum.
667 ELSE.
668 ADD xvbap-volum TO l_w_tot_list_vals-volum_f.
669 ENDIF.
670 ADD 1 TO l_w_tot_list_vals-zw_nbitem.
Best Regards,
BDP
Edited by: Bansidhar Padhy on Jan 26, 2010 8:24 AMADD xvbap-volum TO l_w_tot_list_vals-volum.
Declare l_w_tot_list_vals-volum as "like vbap-volum" or (preferably) "type volum_ap".
If you're using a packed decimal, you've done something like.... volum(5) type p decimals 2, which is a great way to get an overflow...if you use packed decimals in a program...declare <field> type p decimals <n> without a length attribute, so that SAP can use the full 8 bytes for the calculation.....the put it into a alpha field for display, if needed.... -
What is the BADI while SAVING purchase order using me22n?
what is the BADI while SAVING purchase order using me22n?
while i will save purchase order through me22n, badi should be fire what is badi for that?
regards,
dushyant.Dushyant,
Hopefully you know how to implement the BADI ME_PROCESS_PO_CUST now.
The following are the codes that you can put in the method "Post".
DATA: LW_HEADER TYPE MEPOHEADER,
LW_POSTED_HEADER TYPE MEPOHEADER,
LW_VALID TYPE MMPUR_BOOL,
ITAB_ITEM TYPE PURCHASE_ORDER_ITEMS,
LW_ITEM TYPE MEPOITEM,
ITEM_INTERFACE TYPE PURCHASE_ORDER_ITEM,
ITAB_ACCT TYPE PURCHASE_ORDER_ACCOUNTINGS,
ACCT_INTERFACE TYPE PURCHASE_ORDER_ACCOUNTING,
LW_ACCT TYPE MEPOACCOUNTING,
LW_POSTED_ACCT TYPE MEPOACCOUNTING,
W_ACCT_CHANGED TYPE C,
W_GRANT_AMT TYPE EKPO-NETWR,
W_FINANCE_AMT TYPE EKPO-NETWR,
W_FLAG TYPE C.
Check if PO header data is valid
CLEAR LW_VALID.
CALL METHOD IM_HEADER->IS_VALID
RECEIVING
RE_VALID = LW_VALID.
CHECK LW_VALID = 'X'.
PO header data is valid
Get the newly updated PO header data
CLEAR LW_HEADER.
CALL METHOD IM_HEADER->GET_DATA
RECEIVING
RE_DATA = LW_HEADER.
Get the posted PO header data
CLEAR LW_POSTED_HEADER.
CALL METHOD IM_HEADER->GET_PERSISTENT_DATA
IMPORTING
EX_DATA = LW_POSTED_HEADER
EXCEPTIONS
NO_DATA = 1.
IF SY-SUBRC <> 0.
CLEAR LW_POSTED_HEADER.
ENDIF.
Get PO line items
REFRESH ITAB_ITEM.
CALL METHOD IM_HEADER->GET_ITEMS
RECEIVING
RE_ITEMS = ITAB_ITEM.
LOOP AT ITAB_ITEM INTO ITEM_INTERFACE.
Check if PO line item is valid
CLEAR LW_VALID.
CALL METHOD ITEM_INTERFACE-ITEM->IS_VALID
RECEIVING
RE_VALID = LW_VALID.
IF LW_VALID <> 'X'.
This PO line item is not valid
CLEAR W_ACCT_CHANGED.
EXIT.
ENDIF.
CLEAR LW_ITEM.
CALL METHOD ITEM_INTERFACE-ITEM->GET_DATA
RECEIVING
RE_DATA = LW_ITEM.
Get the account interface
REFRESH ITAB_ACCT.
CALL METHOD ITEM_INTERFACE-ITEM->GET_ACCOUNTINGS
RECEIVING
RE_ACCOUNTINGS = ITAB_ACCT.
LOOP AT ITAB_ACCT INTO ACCT_INTERFACE.
CLEAR LW_ACCT.
Get the newly updated PO item data
CALL METHOD ACCT_INTERFACE-ACCOUNTING->GET_DATA
RECEIVING
RE_DATA = LW_ACCT.
CLEAR LW_POSTED_ACCT.
Get the posted PO item data
CALL METHOD ACCT_INTERFACE-ACCOUNTING->GET_PERSISTENT_DATA
IMPORTING
EX_DATA = LW_POSTED_ACCT
EXCEPTIONS
NO_DATA = 1.
IF SY-SUBRC > 0.
CLEAR LW_POSTED_ACCT.
ENDIF.
IF LW_ACCT-LOEKZ <> LW_POSTED_ACCT-LOEKZ OR
LW_ACCT-KOSTL <> LW_POSTED_ACCT-KOSTL OR
LW_ACCT-PRCTR <> LW_POSTED_ACCT-PRCTR OR
LW_ACCT-PS_PSP_PNR <> LW_POSTED_ACCT-PS_PSP_PNR.
Account assignment was changed
We will force this PO to go through workflow
W_ACCT_CHANGED = 'Y'.
ENDIF.
ENDLOOP.
ENDLOOP. -
User Exit for ME22N while saving of PO
Hi all,
i want a USER EXIT for ME22N while saving. i want EKET data.
After checking EKET data, i want to chage EKPO data.
Thanks
pabiHi,
Below Exit you can have access to EKET and EKPO data in the tables paramters before the SAVE
EXIT_SAPMM06E_012
TEKPO: EKPO data
TEKET: EKET data
Enhancement:MM06E005 (Check in SMOD transaction)
Check for one Paramter: I_TRTYP (This is for Create/Change/Display Modes) or You can check on Sy-Tcode = ME22N
Hope this helps
Regards
Shiva -
RunTime Error while saving a Sales Order
Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
PavanHi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji
Maybe you are looking for
-
How do I remove migrated PPC apps from Intel iMac that has the same apps?
Before I begin, please know that I've read a lot of previous posts but all the posts only had some of what I needed so I'm posting this as a new topic. OK, here I go: My PPC running 10.5 just froze-up (that has since been solved) but in the process o
-
I am unable to make any changes in iTunes. Usually a slow double-click allows me to change Title, Artist, Genre, etc. When I right-click and select get info, the fields are all unavailable. Is there something I can do?
-
Skin color correction in Lightroom
I'm not ready for Photoshop, yet. I'm looking for a better way to adjust skin tones in Lightoom. Ideally, using the rgb color information numbers to help me When I hover my mouse over an area to guide me. What I'm doing at present is, after I've esta
-
Does Photoshop CS6 compatible with Windows 8?
Does Photoshop CS6 compatible with Windows 8 Consumer Preview?
-
How can I get icloud on my macbook
Hi. I have a Macbook running OSX 10.5.8. I am trying to get iCloud running with my Iphone. Any ideas?